From patchwork Thu Nov 16 10:31:04 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Th=C3=A9o_Lebrun?= X-Patchwork-Id: 165747 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a59:b909:0:b0:403:3b70:6f57 with SMTP id t9csp3118013vqg; Thu, 16 Nov 2023 02:31:56 -0800 (PST) X-Google-Smtp-Source: AGHT+IGLXpNhN55CYssCXRSVYI4sG5Vqunhvo2DaGLyzl64iTbBmEbTc/08h/DPQf/LdW0l+ItjI X-Received: by 2002:a05:6e02:1d99:b0:359:53a4:b221 with SMTP id h25-20020a056e021d9900b0035953a4b221mr20181701ila.22.1700130715784; Thu, 16 Nov 2023 02:31:55 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1700130715; cv=none; d=google.com; s=arc-20160816; b=b5xae3KzM5TSE4GLVgNuEsYTGgiQrsKjxOgYXnNoK/D3wKcVvy60pv/ZzDD/9wROQb PmEkGX0fjs+WdcR3Mi/jDR46ToHLRLDLsKadKFzvr8Z1bIMq91KL3jgqkjnuGdvmR+Sk NDo9LHl6mwz9TQDxkkd8ov4couKkTrn/FWgJRL2T1eBFGCGpdP/KlrzC2zIq3rC0AbXK +TtJuiUItPQhq8jSr5wTYMmL8kBuOQfrapBMVjt2rky9Hkie40jVr2/C1mcSfg3smlgG cEBa4tD0dK/MNR7oWvG3Ll0fDkVBJAVnh5KKvzrrg0hLY8V3ch1qnHZ/FYXXuZawpNik 1Mog== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:cc:to:in-reply-to:references:message-id :content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=c3NQH5TJksPp++eYqnLSt7aJA8WkgIdKVVq2ViIUT3Y=; fh=QQT0ysDV3C9K/ZwUoBeqi9VulQuaknzQuTSh/MRCItc=; b=GughnqcK063to3f330jl2GATFA+TnZvbFT2kxEJ7lrAypjuUIlxkEMKckS8HhfgjJj FkdfQqcXuzGHy/lY4tOGDL4F90kxqfca1o16sLQC/vgt1hGpS/7rYLtpafdT8yUUHCci U/Rl0mKxkh5NmKZ8jA82OgGo5wnnmfU9cbDwSuXC46p73SDKs8krd730h3WDwjX/8D2O StHHao2qCELFY0xjMvy38RrlYxMdJf/SEYeHfPw69K3NoimSfrbp1dUWHWEbzr5jQw2f GTbLyOv7r+2kNOxtMjpnkigiqt+APaSbLd4TGAb5AlPTK42b0M/N4ZbEzOK2E8HaAWP8 v0eA== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@bootlin.com header.s=gm1 header.b=GVd+H7uT; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.38 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=REJECT sp=REJECT dis=NONE) header.from=bootlin.com Received: from fry.vger.email (fry.vger.email. [23.128.96.38]) by mx.google.com with ESMTPS id f2-20020a056a00228200b006c332132d38si12593600pfe.268.2023.11.16.02.31.55 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 16 Nov 2023 02:31:55 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.38 as permitted sender) client-ip=23.128.96.38; Authentication-Results: mx.google.com; dkim=pass header.i=@bootlin.com header.s=gm1 header.b=GVd+H7uT; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.38 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=REJECT sp=REJECT dis=NONE) header.from=bootlin.com Received: from out1.vger.email (depot.vger.email [IPv6:2620:137:e000::3:0]) by fry.vger.email (Postfix) with ESMTP id 20CFD81BFB94; Thu, 16 Nov 2023 02:31:46 -0800 (PST) X-Virus-Status: Clean X-Virus-Scanned: clamav-milter 0.103.11 at fry.vger.email Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S235118AbjKPKbb (ORCPT + 29 others); Thu, 16 Nov 2023 05:31:31 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:36120 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230287AbjKPKb3 (ORCPT ); Thu, 16 Nov 2023 05:31:29 -0500 Received: from relay3-d.mail.gandi.net (relay3-d.mail.gandi.net [IPv6:2001:4b98:dc4:8::223]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 78C40B8; Thu, 16 Nov 2023 02:31:24 -0800 (PST) Received: by mail.gandi.net (Postfix) with ESMTPSA id AE3C160008; Thu, 16 Nov 2023 10:31:22 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1700130683; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version:content-type:content-type: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=c3NQH5TJksPp++eYqnLSt7aJA8WkgIdKVVq2ViIUT3Y=; b=GVd+H7uT8TBSasEyHpMas+anJyAxeD4KPvTJDKEYLyu2odGall/rayKoetryVV/P3UxH/a R7RQXBTf5NV6JHbzdB3gBOrsi0ZSWxt4NvQqaabzOKngz8aIWqlgOAM4amLT5ZMyU7LJGo RgDkPaZQAKaU0iZLBLT+U5OrWodZuPXAYFkettKmG/cShzwF+dLmvpLYYq2R1ee9xEdu6F tNQ7RaJxaRlgkavoJpyXDq7QzcrB1dFo+Tm8LL6QehZX/uOUeW6ObtSQadKE/LuhWrEoHy hQf+WKLaGwifEsc8tiYrFtJ5CdhhDB8rgYv5+x5jsusvugjN2kbVj39ZbBdRSQ== From: =?utf-8?q?Th=C3=A9o_Lebrun?= Date: Thu, 16 Nov 2023 11:31:04 +0100 Subject: [PATCH v2 1/5] tty: serial: amba: cleanup whitespace MIME-Version: 1.0 Message-Id: <20231116-mbly-uart-v2-1-863f665ce520@bootlin.com> References: <20231116-mbly-uart-v2-0-863f665ce520@bootlin.com> In-Reply-To: <20231116-mbly-uart-v2-0-863f665ce520@bootlin.com> To: Russell King , Greg Kroah-Hartman , Jiri Slaby Cc: linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org, Linus Walleij , =?utf-8?q?Gr=C3=A9gory_Clement?= , Alexandre Belloni , Thomas Petazzoni , Vladimir Kondratiev , Tawfik Bayouk , =?utf-8?q?Th=C3=A9o_Lebrun?= X-Mailer: b4 0.12.3 X-GND-Sasl: theo.lebrun@bootlin.com X-Spam-Status: No, score=-0.9 required=5.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,MAILING_LIST_MULTI, SPF_HELO_NONE,SPF_PASS,T_SCC_BODY_TEXT_LINE,URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on fry.vger.email Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-Greylist: Sender passed SPF test, not delayed by milter-greylist-4.6.4 (fry.vger.email [0.0.0.0]); Thu, 16 Nov 2023 02:31:46 -0800 (PST) X-getmail-retrieved-from-mailbox: INBOX X-GMAIL-THRID: 1782716265613001631 X-GMAIL-MSGID: 1782716265613001631 Fix whitespace in include/linux/amba/serial.h to match current kernel coding standards. Fixes about: - CHECK: spaces preferred around that '|' (ctx:VxV) - ERROR: code indent should use tabs where possible - WARNING: Unnecessary space before function pointer arguments - WARNING: please, no spaces at the start of a line Reviewed-by: Linus Walleij Signed-off-by: Théo Lebrun Reviewed-by: Ilpo Järvinen --- include/linux/amba/serial.h | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h index a1307b58cc2c..27003ec52114 100644 --- a/include/linux/amba/serial.h +++ b/include/linux/amba/serial.h @@ -75,10 +75,10 @@ #define UART011_DR_PE (1 << 9) #define UART011_DR_FE (1 << 8) -#define UART01x_RSR_OE 0x08 -#define UART01x_RSR_BE 0x04 -#define UART01x_RSR_PE 0x02 -#define UART01x_RSR_FE 0x01 +#define UART01x_RSR_OE 0x08 +#define UART01x_RSR_BE 0x04 +#define UART01x_RSR_PE 0x02 +#define UART01x_RSR_FE 0x01 #define UART011_FR_RI 0x100 #define UART011_FR_TXFE 0x080 @@ -86,9 +86,9 @@ #define UART01x_FR_TXFF 0x020 #define UART01x_FR_RXFE 0x010 #define UART01x_FR_BUSY 0x008 -#define UART01x_FR_DCD 0x004 -#define UART01x_FR_DSR 0x002 -#define UART01x_FR_CTS 0x001 +#define UART01x_FR_DCD 0x004 +#define UART01x_FR_DSR 0x002 +#define UART01x_FR_CTS 0x001 #define UART01x_FR_TMSK (UART01x_FR_TXFF + UART01x_FR_BUSY) /* @@ -110,14 +110,14 @@ #define UART011_CR_TXE 0x0100 /* transmit enable */ #define UART011_CR_LBE 0x0080 /* loopback enable */ #define UART010_CR_RTIE 0x0040 -#define UART010_CR_TIE 0x0020 -#define UART010_CR_RIE 0x0010 +#define UART010_CR_TIE 0x0020 +#define UART010_CR_RIE 0x0010 #define UART010_CR_MSIE 0x0008 #define ST_UART011_CR_OVSFACT 0x0008 /* Oversampling factor */ #define UART01x_CR_IIRLP 0x0004 /* SIR low power mode */ #define UART01x_CR_SIREN 0x0002 /* SIR enable */ #define UART01x_CR_UARTEN 0x0001 /* UART enable */ - + #define UART011_LCRH_SPS 0x80 #define UART01x_LCRH_WLEN_8 0x60 #define UART01x_LCRH_WLEN_7 0x40 @@ -203,8 +203,8 @@ #define UART011_TXDMAE (1 << 1) /* enable transmit dma */ #define UART011_RXDMAE (1 << 0) /* enable receive dma */ -#define UART01x_RSR_ANY (UART01x_RSR_OE|UART01x_RSR_BE|UART01x_RSR_PE|UART01x_RSR_FE) -#define UART01x_FR_MODEM_ANY (UART01x_FR_DCD|UART01x_FR_DSR|UART01x_FR_CTS) +#define UART01x_RSR_ANY (UART01x_RSR_OE | UART01x_RSR_BE | UART01x_RSR_PE | UART01x_RSR_FE) +#define UART01x_FR_MODEM_ANY (UART01x_FR_DCD | UART01x_FR_DSR | UART01x_FR_CTS) #ifndef __ASSEMBLY__ struct amba_device; /* in uncompress this is included but amba/bus.h is not */ @@ -220,8 +220,8 @@ struct amba_pl011_data { bool dma_rx_poll_enable; unsigned int dma_rx_poll_rate; unsigned int dma_rx_poll_timeout; - void (*init) (void); - void (*exit) (void); + void (*init)(void); + void (*exit)(void); }; #endif From patchwork Thu Nov 16 10:31:05 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Th=C3=A9o_Lebrun?= X-Patchwork-Id: 165750 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a59:b909:0:b0:403:3b70:6f57 with SMTP id t9csp3118330vqg; Thu, 16 Nov 2023 02:32:35 -0800 (PST) X-Google-Smtp-Source: AGHT+IFbC5RlVZLvQWZEliI9NV5oqY4ZqRCbIiHVcgNF71EGDQmfygj0+PN09++Hmml3AWx/hfTs X-Received: by 2002:a17:902:d2c3:b0:1b0:f8:9b2d with SMTP id n3-20020a170902d2c300b001b000f89b2dmr8751108plc.29.1700130754916; Thu, 16 Nov 2023 02:32:34 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1700130754; cv=none; d=google.com; s=arc-20160816; b=W5Hi20ulAelSdYId5hmxzHu+UrcGpqudq3hm2pA79PWflk7uiyv/99E44kDbrmYjRC z/G00uXYxmueaL6iAy37hgJnocYBYRYbAbp8xkuxdm29UBv4S/Q/GpdF5fW24s1j6Qfe zezeSuqnTkfxGGofSnHgJWDbK82hK0evl47VxvQtVeEpjFqWAEy1l/mBkwdS9PWhZJj6 ZA81TatsG+T/JEmXJqjC2Qhni/DlXYl8ctG8WOVGNro20sz1Nhck2OGA0zisQYd3LApz t99w6L+nOchLzMF/3xvuMUsN7UG7CAJnT0Ps0yWX9jbslHMuuOKhGPXbzLyb2w8I0XNP JeTA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:cc:to:in-reply-to:references:message-id :content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=fM59YOYx387ExI90NlfjoEIj0kAKoJQp2IeMeWxqUo4=; fh=QQT0ysDV3C9K/ZwUoBeqi9VulQuaknzQuTSh/MRCItc=; b=y2MKjjVmvD9n1gCypnJmwydG3EbVnmqqf2C0Dsm+85zEp0VRQiOVUAoyf9Tcze9nbK o20HFeN3nZB4Ww/Mgw98AoLCA5HLFS/oaw/wklZgOI/kR5rArznnwJ0Zhy3C8HYyp5uk 8CeyzaEicY3n57uIXUmYdgp/an470SHW4UCWng5DE4lNNL5SwnnsyiuwbdsXo0jvzKWg isDHtRbMGNpD7ylKS9vvKzr78IuOw6v7KE5MJuFCJo19HvA+YpF6pGrIr4GAacvo3fsY l6rIBXlsqJzolq1Uv71b/UjHEAtdD4zk5y4WrcW3PJFjAVMYd9dyOQuxDo+8akPYpXmW kZTw== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@bootlin.com header.s=gm1 header.b=YjWAt1r+; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:8 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=REJECT sp=REJECT dis=NONE) header.from=bootlin.com Received: from fry.vger.email (fry.vger.email. [2620:137:e000::3:8]) by mx.google.com with ESMTPS id b23-20020a170902d89700b001bdcd2e1706si11771346plz.196.2023.11.16.02.32.34 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 16 Nov 2023 02:32:34 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:8 as permitted sender) client-ip=2620:137:e000::3:8; Authentication-Results: mx.google.com; dkim=pass header.i=@bootlin.com header.s=gm1 header.b=YjWAt1r+; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:8 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=REJECT sp=REJECT dis=NONE) header.from=bootlin.com Received: from out1.vger.email (depot.vger.email [IPv6:2620:137:e000::3:0]) by fry.vger.email (Postfix) with ESMTP id EEDF481BFBAE; Thu, 16 Nov 2023 02:32:23 -0800 (PST) X-Virus-Status: Clean X-Virus-Scanned: clamav-milter 0.103.11 at fry.vger.email Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1345029AbjKPKbk (ORCPT + 29 others); Thu, 16 Nov 2023 05:31:40 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:36144 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233460AbjKPKbb (ORCPT ); Thu, 16 Nov 2023 05:31:31 -0500 Received: from relay3-d.mail.gandi.net (relay3-d.mail.gandi.net [217.70.183.195]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 3D83B1A7; Thu, 16 Nov 2023 02:31:25 -0800 (PST) Received: by mail.gandi.net (Postfix) with ESMTPSA id 3EA8160004; Thu, 16 Nov 2023 10:31:23 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1700130683; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version:content-type:content-type: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=fM59YOYx387ExI90NlfjoEIj0kAKoJQp2IeMeWxqUo4=; b=YjWAt1r+0En38ocTh/magYUDFmqs0YtC5YrAasE6ed3lmyh0lfx38h/Gy5VO8wuDQb7qkw 5wN1sSdRkueuU3w6RPzf/DYShxidfIuEXfSpWN3f7u5Mg58jYhSnPKg0zlX99AG3FxUIK+ 1p0tfoFaba1uOU+iGt50Tsik2UFu0brjYADV40CcQD6IbZeZdBgSfQ2dovx9NSgoFB1WY4 W/vd6eYdBfXLyUbTJSm0MiSSRLYekRXcs7zTyj6BJeiM9BZpXHbiEmvBCbYvBe+d7cA7/8 uU41qiByNp0y+enMo41+AZg/NIioMWhPNqMfIDA3XfS0eUT9Yu3Knuc04hBU9w== From: =?utf-8?q?Th=C3=A9o_Lebrun?= Date: Thu, 16 Nov 2023 11:31:05 +0100 Subject: [PATCH v2 2/5] tty: serial: amba: Use BIT() macro for constant declarations MIME-Version: 1.0 Message-Id: <20231116-mbly-uart-v2-2-863f665ce520@bootlin.com> References: <20231116-mbly-uart-v2-0-863f665ce520@bootlin.com> In-Reply-To: <20231116-mbly-uart-v2-0-863f665ce520@bootlin.com> To: Russell King , Greg Kroah-Hartman , Jiri Slaby Cc: linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org, Linus Walleij , =?utf-8?q?Gr=C3=A9gory_Clement?= , Alexandre Belloni , Thomas Petazzoni , Vladimir Kondratiev , Tawfik Bayouk , =?utf-8?q?Th=C3=A9o_Lebrun?= X-Mailer: b4 0.12.3 X-GND-Sasl: theo.lebrun@bootlin.com X-Spam-Status: No, score=-0.9 required=5.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,MAILING_LIST_MULTI, SPF_HELO_NONE,SPF_PASS,T_SCC_BODY_TEXT_LINE,URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on fry.vger.email Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-Greylist: Sender passed SPF test, not delayed by milter-greylist-4.6.4 (fry.vger.email [0.0.0.0]); Thu, 16 Nov 2023 02:32:24 -0800 (PST) X-getmail-retrieved-from-mailbox: INBOX X-GMAIL-THRID: 1782716306217745159 X-GMAIL-MSGID: 1782716306217745159 The driver uses bit shifts and hexadecimal expressions to declare constants. Replace that with the BIT() macro that clarifies intent. Reviewed-by: Linus Walleij Signed-off-by: Théo Lebrun Reviewed-by: Ilpo Järvinen --- include/linux/amba/serial.h | 183 ++++++++++++++++++++++---------------------- 1 file changed, 92 insertions(+), 91 deletions(-) diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h index 27003ec52114..a1f966fcb9c5 100644 --- a/include/linux/amba/serial.h +++ b/include/linux/amba/serial.h @@ -10,6 +10,7 @@ #ifndef ASM_ARM_HARDWARE_SERIAL_AMBA_H #define ASM_ARM_HARDWARE_SERIAL_AMBA_H +#include #include /* ------------------------------------------------------------------------------- @@ -70,64 +71,64 @@ #define ZX_UART011_ICR 0x4c #define ZX_UART011_DMACR 0x50 -#define UART011_DR_OE (1 << 11) -#define UART011_DR_BE (1 << 10) -#define UART011_DR_PE (1 << 9) -#define UART011_DR_FE (1 << 8) - -#define UART01x_RSR_OE 0x08 -#define UART01x_RSR_BE 0x04 -#define UART01x_RSR_PE 0x02 -#define UART01x_RSR_FE 0x01 - -#define UART011_FR_RI 0x100 -#define UART011_FR_TXFE 0x080 -#define UART011_FR_RXFF 0x040 -#define UART01x_FR_TXFF 0x020 -#define UART01x_FR_RXFE 0x010 -#define UART01x_FR_BUSY 0x008 -#define UART01x_FR_DCD 0x004 -#define UART01x_FR_DSR 0x002 -#define UART01x_FR_CTS 0x001 +#define UART011_DR_OE BIT(11) +#define UART011_DR_BE BIT(10) +#define UART011_DR_PE BIT(9) +#define UART011_DR_FE BIT(8) + +#define UART01x_RSR_OE BIT(3) +#define UART01x_RSR_BE BIT(2) +#define UART01x_RSR_PE BIT(1) +#define UART01x_RSR_FE BIT(0) + +#define UART011_FR_RI BIT(8) +#define UART011_FR_TXFE BIT(7) +#define UART011_FR_RXFF BIT(6) +#define UART01x_FR_TXFF BIT(5) +#define UART01x_FR_RXFE BIT(4) +#define UART01x_FR_BUSY BIT(3) +#define UART01x_FR_DCD BIT(2) +#define UART01x_FR_DSR BIT(1) +#define UART01x_FR_CTS BIT(0) #define UART01x_FR_TMSK (UART01x_FR_TXFF + UART01x_FR_BUSY) /* * Some bits of Flag Register on ZTE device have different position from * standard ones. */ -#define ZX_UART01x_FR_BUSY 0x100 -#define ZX_UART01x_FR_DSR 0x008 -#define ZX_UART01x_FR_CTS 0x002 -#define ZX_UART011_FR_RI 0x001 - -#define UART011_CR_CTSEN 0x8000 /* CTS hardware flow control */ -#define UART011_CR_RTSEN 0x4000 /* RTS hardware flow control */ -#define UART011_CR_OUT2 0x2000 /* OUT2 */ -#define UART011_CR_OUT1 0x1000 /* OUT1 */ -#define UART011_CR_RTS 0x0800 /* RTS */ -#define UART011_CR_DTR 0x0400 /* DTR */ -#define UART011_CR_RXE 0x0200 /* receive enable */ -#define UART011_CR_TXE 0x0100 /* transmit enable */ -#define UART011_CR_LBE 0x0080 /* loopback enable */ -#define UART010_CR_RTIE 0x0040 -#define UART010_CR_TIE 0x0020 -#define UART010_CR_RIE 0x0010 -#define UART010_CR_MSIE 0x0008 -#define ST_UART011_CR_OVSFACT 0x0008 /* Oversampling factor */ -#define UART01x_CR_IIRLP 0x0004 /* SIR low power mode */ -#define UART01x_CR_SIREN 0x0002 /* SIR enable */ -#define UART01x_CR_UARTEN 0x0001 /* UART enable */ - -#define UART011_LCRH_SPS 0x80 +#define ZX_UART01x_FR_BUSY BIT(8) +#define ZX_UART01x_FR_DSR BIT(3) +#define ZX_UART01x_FR_CTS BIT(1) +#define ZX_UART011_FR_RI BIT(0) + +#define UART011_CR_CTSEN BIT(15) /* CTS hardware flow control */ +#define UART011_CR_RTSEN BIT(14) /* RTS hardware flow control */ +#define UART011_CR_OUT2 BIT(13) /* OUT2 */ +#define UART011_CR_OUT1 BIT(12) /* OUT1 */ +#define UART011_CR_RTS BIT(11) /* RTS */ +#define UART011_CR_DTR BIT(10) /* DTR */ +#define UART011_CR_RXE BIT(9) /* receive enable */ +#define UART011_CR_TXE BIT(8) /* transmit enable */ +#define UART011_CR_LBE BIT(7) /* loopback enable */ +#define UART010_CR_RTIE BIT(6) +#define UART010_CR_TIE BIT(5) +#define UART010_CR_RIE BIT(4) +#define UART010_CR_MSIE BIT(3) +#define ST_UART011_CR_OVSFACT BIT(3) /* Oversampling factor */ +#define UART01x_CR_IIRLP BIT(2) /* SIR low power mode */ +#define UART01x_CR_SIREN BIT(1) /* SIR enable */ +#define UART01x_CR_UARTEN BIT(0) /* UART enable */ + +#define UART011_LCRH_SPS BIT(7) #define UART01x_LCRH_WLEN_8 0x60 #define UART01x_LCRH_WLEN_7 0x40 #define UART01x_LCRH_WLEN_6 0x20 #define UART01x_LCRH_WLEN_5 0x00 -#define UART01x_LCRH_FEN 0x10 -#define UART01x_LCRH_STP2 0x08 -#define UART01x_LCRH_EPS 0x04 -#define UART01x_LCRH_PEN 0x02 -#define UART01x_LCRH_BRK 0x01 +#define UART01x_LCRH_FEN BIT(4) +#define UART01x_LCRH_STP2 BIT(3) +#define UART01x_LCRH_EPS BIT(2) +#define UART01x_LCRH_PEN BIT(1) +#define UART01x_LCRH_BRK BIT(0) #define ST_UART011_DMAWM_RX_1 (0 << 3) #define ST_UART011_DMAWM_RX_2 (1 << 3) @@ -144,10 +145,10 @@ #define ST_UART011_DMAWM_TX_32 5 #define ST_UART011_DMAWM_TX_48 6 -#define UART010_IIR_RTIS 0x08 -#define UART010_IIR_TIS 0x04 -#define UART010_IIR_RIS 0x02 -#define UART010_IIR_MIS 0x01 +#define UART010_IIR_RTIS BIT(3) +#define UART010_IIR_TIS BIT(2) +#define UART010_IIR_RIS BIT(1) +#define UART010_IIR_MIS BIT(0) #define UART011_IFLS_RX1_8 (0 << 3) #define UART011_IFLS_RX2_8 (1 << 3) @@ -163,45 +164,45 @@ #define UART011_IFLS_RX_HALF (5 << 3) #define UART011_IFLS_TX_HALF (5 << 0) -#define UART011_OEIM (1 << 10) /* overrun error interrupt mask */ -#define UART011_BEIM (1 << 9) /* break error interrupt mask */ -#define UART011_PEIM (1 << 8) /* parity error interrupt mask */ -#define UART011_FEIM (1 << 7) /* framing error interrupt mask */ -#define UART011_RTIM (1 << 6) /* receive timeout interrupt mask */ -#define UART011_TXIM (1 << 5) /* transmit interrupt mask */ -#define UART011_RXIM (1 << 4) /* receive interrupt mask */ -#define UART011_DSRMIM (1 << 3) /* DSR interrupt mask */ -#define UART011_DCDMIM (1 << 2) /* DCD interrupt mask */ -#define UART011_CTSMIM (1 << 1) /* CTS interrupt mask */ -#define UART011_RIMIM (1 << 0) /* RI interrupt mask */ - -#define UART011_OEIS (1 << 10) /* overrun error interrupt status */ -#define UART011_BEIS (1 << 9) /* break error interrupt status */ -#define UART011_PEIS (1 << 8) /* parity error interrupt status */ -#define UART011_FEIS (1 << 7) /* framing error interrupt status */ -#define UART011_RTIS (1 << 6) /* receive timeout interrupt status */ -#define UART011_TXIS (1 << 5) /* transmit interrupt status */ -#define UART011_RXIS (1 << 4) /* receive interrupt status */ -#define UART011_DSRMIS (1 << 3) /* DSR interrupt status */ -#define UART011_DCDMIS (1 << 2) /* DCD interrupt status */ -#define UART011_CTSMIS (1 << 1) /* CTS interrupt status */ -#define UART011_RIMIS (1 << 0) /* RI interrupt status */ - -#define UART011_OEIC (1 << 10) /* overrun error interrupt clear */ -#define UART011_BEIC (1 << 9) /* break error interrupt clear */ -#define UART011_PEIC (1 << 8) /* parity error interrupt clear */ -#define UART011_FEIC (1 << 7) /* framing error interrupt clear */ -#define UART011_RTIC (1 << 6) /* receive timeout interrupt clear */ -#define UART011_TXIC (1 << 5) /* transmit interrupt clear */ -#define UART011_RXIC (1 << 4) /* receive interrupt clear */ -#define UART011_DSRMIC (1 << 3) /* DSR interrupt clear */ -#define UART011_DCDMIC (1 << 2) /* DCD interrupt clear */ -#define UART011_CTSMIC (1 << 1) /* CTS interrupt clear */ -#define UART011_RIMIC (1 << 0) /* RI interrupt clear */ - -#define UART011_DMAONERR (1 << 2) /* disable dma on error */ -#define UART011_TXDMAE (1 << 1) /* enable transmit dma */ -#define UART011_RXDMAE (1 << 0) /* enable receive dma */ +#define UART011_OEIM BIT(10) /* overrun error interrupt mask */ +#define UART011_BEIM BIT(9) /* break error interrupt mask */ +#define UART011_PEIM BIT(8) /* parity error interrupt mask */ +#define UART011_FEIM BIT(7) /* framing error interrupt mask */ +#define UART011_RTIM BIT(6) /* receive timeout interrupt mask */ +#define UART011_TXIM BIT(5) /* transmit interrupt mask */ +#define UART011_RXIM BIT(4) /* receive interrupt mask */ +#define UART011_DSRMIM BIT(3) /* DSR interrupt mask */ +#define UART011_DCDMIM BIT(2) /* DCD interrupt mask */ +#define UART011_CTSMIM BIT(1) /* CTS interrupt mask */ +#define UART011_RIMIM BIT(0) /* RI interrupt mask */ + +#define UART011_OEIS BIT(10) /* overrun error interrupt status */ +#define UART011_BEIS BIT(9) /* break error interrupt status */ +#define UART011_PEIS BIT(8) /* parity error interrupt status */ +#define UART011_FEIS BIT(7) /* framing error interrupt status */ +#define UART011_RTIS BIT(6) /* receive timeout interrupt status */ +#define UART011_TXIS BIT(5) /* transmit interrupt status */ +#define UART011_RXIS BIT(4) /* receive interrupt status */ +#define UART011_DSRMIS BIT(3) /* DSR interrupt status */ +#define UART011_DCDMIS BIT(2) /* DCD interrupt status */ +#define UART011_CTSMIS BIT(1) /* CTS interrupt status */ +#define UART011_RIMIS BIT(0) /* RI interrupt status */ + +#define UART011_OEIC BIT(10) /* overrun error interrupt clear */ +#define UART011_BEIC BIT(9) /* break error interrupt clear */ +#define UART011_PEIC BIT(8) /* parity error interrupt clear */ +#define UART011_FEIC BIT(7) /* framing error interrupt clear */ +#define UART011_RTIC BIT(6) /* receive timeout interrupt clear */ +#define UART011_TXIC BIT(5) /* transmit interrupt clear */ +#define UART011_RXIC BIT(4) /* receive interrupt clear */ +#define UART011_DSRMIC BIT(3) /* DSR interrupt clear */ +#define UART011_DCDMIC BIT(2) /* DCD interrupt clear */ +#define UART011_CTSMIC BIT(1) /* CTS interrupt clear */ +#define UART011_RIMIC BIT(0) /* RI interrupt clear */ + +#define UART011_DMAONERR BIT(2) /* disable dma on error */ +#define UART011_TXDMAE BIT(1) /* enable transmit dma */ +#define UART011_RXDMAE BIT(0) /* enable receive dma */ #define UART01x_RSR_ANY (UART01x_RSR_OE | UART01x_RSR_BE | UART01x_RSR_PE | UART01x_RSR_FE) #define UART01x_FR_MODEM_ANY (UART01x_FR_DCD | UART01x_FR_DSR | UART01x_FR_CTS) From patchwork Thu Nov 16 10:31:06 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Th=C3=A9o_Lebrun?= X-Patchwork-Id: 165751 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a59:b909:0:b0:403:3b70:6f57 with SMTP id t9csp3118355vqg; Thu, 16 Nov 2023 02:32:38 -0800 (PST) X-Google-Smtp-Source: AGHT+IEY9s7Oxijk9iwBdhNs7+BOLmOZCG2HFY6x42dJqF4trzihgiEHLJ5zb/rUnzP3gDvCwo8M X-Received: by 2002:a05:6a20:7da2:b0:14e:2208:d62f with SMTP id v34-20020a056a207da200b0014e2208d62fmr2358178pzj.22.1700130758649; Thu, 16 Nov 2023 02:32:38 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1700130758; cv=none; d=google.com; s=arc-20160816; b=PK2zn+6zrs5NDVp2Tae8+/qXiDrcYw1U9AVT31dZ1+s56A5cyFIROzHqZKXzRMMatc MRV/a9SRZFP0UczGiZhyxeR4A7LTBhnMMnLY7QAsshHRENiBNPv72h+BGvr4AvIurkok qSfpxLPTRvCpCPUsytJ03N+UP1SBn2S2AFewokJkdBYzhX0z3M3ucOPgty1Eh/M80cKx o2oeLbeu0l0k288uozJkpaPB269PrfuGsADKyusxTNEcaAFGuUeVQLFZxpd1WX09QO+k tWr45fWrPVdoBMP82vaeiZEeacdrYWz02h3rNkbpFBfD76qROq3E+ATgp/0pdg/Y3/RQ YhrQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:cc:to:in-reply-to:references:message-id :content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=doO3amo41xelnW3WYyPttNkeCMCDCEqvnQVAAryk7Ro=; fh=QQT0ysDV3C9K/ZwUoBeqi9VulQuaknzQuTSh/MRCItc=; b=KjjsVv/4T23vZtQ0oMrkirWqIrWNvu5OnTxwoOk1yrL0bvTyPzHkv3JtWDizp7ckoT F3iqKURXpTBJ3gNwQtsoCNJfkksuX4IeKMtQqufUSbp3foAFxWPzzVuO7aUILQm9d8td CmXNpXK23MeGcx7bFcXnyWCV1l90a/og1eW+T7tcrQlKAS7qvVAmRCronOccBxL4Bpr4 4WHKtigChFHVowFTILrYobT95DzZzZ42vMIL1tLkL+rVIl2GXUqAQPVNyFf8nCypAf22 atNcsudfqfHOnazcDCm9ErZIWCVoGJRrV5QbJvXmycDyLVL8NJRMDJrk29oj9xHYsxlx e7aQ== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@bootlin.com header.s=gm1 header.b=H4Uq+AHq; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:2 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=REJECT sp=REJECT dis=NONE) header.from=bootlin.com Received: from agentk.vger.email (agentk.vger.email. [2620:137:e000::3:2]) by mx.google.com with ESMTPS id p30-20020a056a000a1e00b006c0fe1a6e78si12073364pfh.22.2023.11.16.02.32.38 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 16 Nov 2023 02:32:38 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:2 as permitted sender) client-ip=2620:137:e000::3:2; Authentication-Results: mx.google.com; dkim=pass header.i=@bootlin.com header.s=gm1 header.b=H4Uq+AHq; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:2 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=REJECT sp=REJECT dis=NONE) header.from=bootlin.com Received: from out1.vger.email (depot.vger.email [IPv6:2620:137:e000::3:0]) by agentk.vger.email (Postfix) with ESMTP id CE84280EAD53; Thu, 16 Nov 2023 02:32:32 -0800 (PST) X-Virus-Status: Clean X-Virus-Scanned: clamav-milter 0.103.11 at agentk.vger.email Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1345036AbjKPKbn (ORCPT + 29 others); Thu, 16 Nov 2023 05:31:43 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:51676 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234970AbjKPKbb (ORCPT ); Thu, 16 Nov 2023 05:31:31 -0500 Received: from relay3-d.mail.gandi.net (relay3-d.mail.gandi.net [217.70.183.195]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8DFD91A8; Thu, 16 Nov 2023 02:31:25 -0800 (PST) Received: by mail.gandi.net (Postfix) with ESMTPSA id C77A060002; Thu, 16 Nov 2023 10:31:23 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1700130684; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version:content-type:content-type: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=doO3amo41xelnW3WYyPttNkeCMCDCEqvnQVAAryk7Ro=; b=H4Uq+AHqb488g/rn8ESgcXHunFcxK1BfyrFWysAOrhIFBuPGDAHc9hV8/uJFw5ZcR25piA b6jY68gFHZVQ88AK5lgSBthZjuwVy6SHldSo/Gemq1o1G+GYGstvwA4mRaPTXxN/yn/Xpp TaBpsnDKmE2SXDoduKoVE40ATFJB8sK7oe2n9oWHUAvT6+sjosBGJP3ChuIN4aFmErigtl zqTQRL/Nt6i3Cm/FDV9SlnoVshlNfMUfvOXzx/dhb5+koUEv9wAprUZ6JYVEDRLB1UeTdU 2ke5trcqlLauM+GHvQ4jeIbWx7ZxvejCbOIiAYjtWIPFOOJ2vMyNXOaB2jGL0A== From: =?utf-8?q?Th=C3=A9o_Lebrun?= Date: Thu, 16 Nov 2023 11:31:06 +0100 Subject: [PATCH v2 3/5] tty: serial: amba-pl011: cleanup driver MIME-Version: 1.0 Message-Id: <20231116-mbly-uart-v2-3-863f665ce520@bootlin.com> References: <20231116-mbly-uart-v2-0-863f665ce520@bootlin.com> In-Reply-To: <20231116-mbly-uart-v2-0-863f665ce520@bootlin.com> To: Russell King , Greg Kroah-Hartman , Jiri Slaby Cc: linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org, Linus Walleij , =?utf-8?q?Gr=C3=A9gory_Clement?= , Alexandre Belloni , Thomas Petazzoni , Vladimir Kondratiev , Tawfik Bayouk , =?utf-8?q?Th=C3=A9o_Lebrun?= X-Mailer: b4 0.12.3 X-GND-Sasl: theo.lebrun@bootlin.com X-Spam-Status: No, score=-0.9 required=5.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,MAILING_LIST_MULTI, SPF_HELO_NONE,SPF_PASS,T_SCC_BODY_TEXT_LINE,URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on agentk.vger.email Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-Greylist: Sender passed SPF test, not delayed by milter-greylist-4.6.4 (agentk.vger.email [0.0.0.0]); Thu, 16 Nov 2023 02:32:32 -0800 (PST) X-getmail-retrieved-from-mailbox: INBOX X-GMAIL-THRID: 1782716309950118711 X-GMAIL-MSGID: 1782716309950118711 Follow recommandations from: $ ./scripts/checkpatch.pl --strict --file \ drivers/tty/serial/amba-pl011.c It does NOT fix alerts relative to TIOCMBIT which will be dealt with in another patch. Fixes following alerts: CHECK: Alignment should match open parenthesis CHECK: Blank lines aren't necessary after an open brace '{' CHECK: Comparison to NULL could be written [...] CHECK: Lines should not end with a '(' CHECK: Please don't use multiple blank lines CHECK: Please use a blank line after function/struct/union/enum declarations CHECK: Prefer using the BIT macro CHECK: Unbalanced braces around else statement CHECK: Unnecessary parentheses around [...] CHECK: braces {} should be used on all arms of this statement CHECK: spaces preferred around that '/' (ctx:VxV) CHECK: spaces preferred around that '|' (ctx:VxV) ERROR: do not initialise statics to false WARNING: Comparisons should place the constant on the right side of the test WARNING: Possible unnecessary 'out of memory' message WARNING: Prefer 'unsigned int' to bare use of 'unsigned' WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... WARNING: quoted string split across lines Reviewed-by: Linus Walleij Signed-off-by: Théo Lebrun Reviewed-by: Ilpo Järvinen --- drivers/tty/serial/amba-pl011.c | 154 ++++++++++++++++++++-------------------- 1 file changed, 76 insertions(+), 78 deletions(-) diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 3dc9b0fcab1c..d56607957158 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -50,8 +50,8 @@ #define AMBA_ISR_PASS_LIMIT 256 -#define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE) -#define UART_DUMMY_DR_RX (1 << 16) +#define UART_DR_ERROR (UART011_DR_OE | UART011_DR_BE | UART011_DR_PE | UART011_DR_FE) +#define UART_DUMMY_DR_RX BIT(16) enum { REG_DR, @@ -125,7 +125,7 @@ static unsigned int get_fifosize_arm(struct amba_device *dev) static struct vendor_data vendor_arm = { .reg_offset = pl011_std_offsets, - .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, + .ifls = UART011_IFLS_RX4_8 | UART011_IFLS_TX4_8, .fr_busy = UART01x_FR_BUSY, .fr_dsr = UART01x_FR_DSR, .fr_cts = UART01x_FR_CTS, @@ -203,7 +203,7 @@ static unsigned int get_fifosize_st(struct amba_device *dev) static struct vendor_data vendor_st = { .reg_offset = pl011_st_offsets, - .ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF, + .ifls = UART011_IFLS_RX_HALF | UART011_IFLS_TX_HALF, .fr_busy = UART01x_FR_BUSY, .fr_dsr = UART01x_FR_DSR, .fr_cts = UART01x_FR_CTS, @@ -275,13 +275,13 @@ struct uart_amba_port { static unsigned int pl011_tx_empty(struct uart_port *port); static unsigned int pl011_reg_to_offset(const struct uart_amba_port *uap, - unsigned int reg) + unsigned int reg) { return uap->reg_offset[reg]; } static unsigned int pl011_read(const struct uart_amba_port *uap, - unsigned int reg) + unsigned int reg) { void __iomem *addr = uap->port.membase + pl011_reg_to_offset(uap, reg); @@ -290,7 +290,7 @@ static unsigned int pl011_read(const struct uart_amba_port *uap, } static void pl011_write(unsigned int val, const struct uart_amba_port *uap, - unsigned int reg) + unsigned int reg) { void __iomem *addr = uap->port.membase + pl011_reg_to_offset(uap, reg); @@ -328,10 +328,12 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap) uap->port.icount.brk++; if (uart_handle_break(&uap->port)) continue; - } else if (ch & UART011_DR_PE) + } else if (ch & UART011_DR_PE) { uap->port.icount.parity++; - else if (ch & UART011_DR_FE) + } else if (ch & UART011_DR_FE) { uap->port.icount.frame++; + } + if (ch & UART011_DR_OE) uap->port.icount.overrun++; @@ -356,7 +358,6 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap) return fifotaken; } - /* * All the DMA operation mode stuff goes inside this ifdef. * This assumes that you have a generic DMA device interface, @@ -367,18 +368,18 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap) #define PL011_DMA_BUFFER_SIZE PAGE_SIZE static int pl011_sgbuf_init(struct dma_chan *chan, struct pl011_sgbuf *sg, - enum dma_data_direction dir) + enum dma_data_direction dir) { dma_addr_t dma_addr; sg->buf = dma_alloc_coherent(chan->device->dev, - PL011_DMA_BUFFER_SIZE, &dma_addr, GFP_KERNEL); + PL011_DMA_BUFFER_SIZE, &dma_addr, GFP_KERNEL); if (!sg->buf) return -ENOMEM; sg_init_table(&sg->sg, 1); sg_set_page(&sg->sg, phys_to_page(dma_addr), - PL011_DMA_BUFFER_SIZE, offset_in_page(dma_addr)); + PL011_DMA_BUFFER_SIZE, offset_in_page(dma_addr)); sg_dma_address(&sg->sg) = dma_addr; sg_dma_len(&sg->sg) = PL011_DMA_BUFFER_SIZE; @@ -386,12 +387,11 @@ static int pl011_sgbuf_init(struct dma_chan *chan, struct pl011_sgbuf *sg, } static void pl011_sgbuf_free(struct dma_chan *chan, struct pl011_sgbuf *sg, - enum dma_data_direction dir) + enum dma_data_direction dir) { if (sg->buf) { - dma_free_coherent(chan->device->dev, - PL011_DMA_BUFFER_SIZE, sg->buf, - sg_dma_address(&sg->sg)); + dma_free_coherent(chan->device->dev, PL011_DMA_BUFFER_SIZE, + sg->buf, sg_dma_address(&sg->sg)); } } @@ -430,7 +430,7 @@ static void pl011_dma_probe(struct uart_amba_port *uap) dma_cap_set(DMA_SLAVE, mask); chan = dma_request_channel(mask, plat->dma_filter, - plat->dma_tx_param); + plat->dma_tx_param); if (!chan) { dev_err(uap->port.dev, "no TX DMA channel!\n"); return; @@ -471,12 +471,12 @@ static void pl011_dma_probe(struct uart_amba_port *uap) * If the controller does, check for suitable residue processing * otherwise assime all is well. */ - if (0 == dma_get_slave_caps(chan, &caps)) { + if (dma_get_slave_caps(chan, &caps) == 0) { if (caps.residue_granularity == DMA_RESIDUE_GRANULARITY_DESCRIPTOR) { dma_release_channel(chan); dev_info(uap->port.dev, - "RX DMA disabled - no residue processing\n"); + "RX DMA disabled - no residue processing\n"); return; } } @@ -505,18 +505,16 @@ static void pl011_dma_probe(struct uart_amba_port *uap) else uap->dmarx.poll_timeout = 3000; } else if (!plat && dev->of_node) { - uap->dmarx.auto_poll_rate = of_property_read_bool( - dev->of_node, "auto-poll"); + uap->dmarx.auto_poll_rate = + of_property_read_bool(dev->of_node, "auto-poll"); if (uap->dmarx.auto_poll_rate) { u32 x; - if (0 == of_property_read_u32(dev->of_node, - "poll-rate-ms", &x)) + if (of_property_read_u32(dev->of_node, "poll-rate-ms", &x) == 0) uap->dmarx.poll_rate = x; else uap->dmarx.poll_rate = 100; - if (0 == of_property_read_u32(dev->of_node, - "poll-timeout-ms", &x)) + if (of_property_read_u32(dev->of_node, "poll-timeout-ms", &x) == 0) uap->dmarx.poll_timeout = x; else uap->dmarx.poll_timeout = 3000; @@ -624,9 +622,9 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap) if (count > PL011_DMA_BUFFER_SIZE) count = PL011_DMA_BUFFER_SIZE; - if (xmit->tail < xmit->head) + if (xmit->tail < xmit->head) { memcpy(&dmatx->buf[0], &xmit->buf[xmit->tail], count); - else { + } else { size_t first = UART_XMIT_SIZE - xmit->tail; size_t second; @@ -648,7 +646,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap) } desc = dmaengine_prep_slave_sg(chan, &dmatx->sg, 1, DMA_MEM_TO_DEV, - DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { dma_unmap_sg(dma_dev->dev, &dmatx->sg, 1, DMA_TO_DEVICE); uap->dmatx.queued = false; @@ -759,8 +757,9 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) if (pl011_dma_tx_refill(uap) > 0) { uap->im &= ~UART011_TXIM; pl011_write(uap->im, uap, REG_IMSC); - } else + } else { ret = false; + } } else if (!(uap->dmacr & UART011_TXDMAE)) { uap->dmacr |= UART011_TXDMAE; pl011_write(uap->dmacr, uap, REG_DMACR); @@ -836,9 +835,8 @@ static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap) /* Start the RX DMA job */ sgbuf = uap->dmarx.use_buf_b ? &uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a; - desc = dmaengine_prep_slave_sg(rxchan, &sgbuf->sg, 1, - DMA_DEV_TO_MEM, - DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + desc = dmaengine_prep_slave_sg(rxchan, &sgbuf->sg, 1, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); /* * If the DMA engine is busy and cannot prepare a * channel, no big deal, the driver will fall back @@ -894,14 +892,13 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap, /* Pick the remain data from the DMA */ if (pending) { - /* * First take all chars in the DMA pipe, then look in the FIFO. * Note that tty_insert_flip_buf() tries to take as many chars * as it can. */ dma_count = tty_insert_flip_string(port, sgbuf->buf + dmataken, - pending); + pending); uap->port.icount.rx += dma_count; if (dma_count < pending) @@ -983,8 +980,8 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap) /* Switch buffer & re-trigger DMA job */ dmarx->use_buf_b = !dmarx->use_buf_b; if (pl011_dma_rx_trigger_dma(uap)) { - dev_dbg(uap->port.dev, "could not retrigger RX DMA job " - "fall back to interrupt mode\n"); + dev_dbg(uap->port.dev, + "could not retrigger RX DMA job fall back to interrupt mode\n"); uap->im |= UART011_RXIM; pl011_write(uap->im, uap, REG_IMSC); } @@ -1031,8 +1028,8 @@ static void pl011_dma_rx_callback(void *data) * get some IRQ immediately from RX. */ if (ret) { - dev_dbg(uap->port.dev, "could not retrigger RX DMA job " - "fall back to interrupt mode\n"); + dev_dbg(uap->port.dev, + "could not retrigger RX DMA job fall back to interrupt mode\n"); uap->im |= UART011_RXIM; pl011_write(uap->im, uap, REG_IMSC); } @@ -1077,7 +1074,7 @@ static void pl011_dma_rx_poll(struct timer_list *t) dmataken = sgbuf->sg.length - dmarx->last_residue; size = dmarx->last_residue - state.residue; dma_count = tty_insert_flip_string(port, sgbuf->buf + dmataken, - size); + size); if (dma_count == size) dmarx->last_residue = state.residue; dmarx->last_jiffies = jiffies; @@ -1090,7 +1087,6 @@ static void pl011_dma_rx_poll(struct timer_list *t) */ if (jiffies_to_msecs(jiffies - dmarx->last_jiffies) > uap->dmarx.poll_timeout) { - spin_lock_irqsave(&uap->port.lock, flags); pl011_dma_rx_stop(uap); uap->im |= UART011_RXIM; @@ -1102,7 +1098,7 @@ static void pl011_dma_rx_poll(struct timer_list *t) del_timer(&uap->dmarx.timer); } else { mod_timer(&uap->dmarx.timer, - jiffies + msecs_to_jiffies(uap->dmarx.poll_rate)); + jiffies + msecs_to_jiffies(uap->dmarx.poll_rate)); } } @@ -1118,7 +1114,6 @@ static void pl011_dma_startup(struct uart_amba_port *uap) uap->dmatx.buf = kmalloc(PL011_DMA_BUFFER_SIZE, GFP_KERNEL | __GFP_DMA); if (!uap->dmatx.buf) { - dev_err(uap->port.dev, "no memory for DMA TX buffer\n"); uap->port.fifosize = uap->fifosize; return; } @@ -1169,13 +1164,12 @@ static void pl011_dma_startup(struct uart_amba_port *uap) if (uap->using_rx_dma) { if (pl011_dma_rx_trigger_dma(uap)) - dev_dbg(uap->port.dev, "could not trigger initial " - "RX DMA job, fall back to interrupt mode\n"); + dev_dbg(uap->port.dev, + "could not trigger initial RX DMA job, fall back to interrupt mode\n"); if (uap->dmarx.poll_rate) { timer_setup(&uap->dmarx.timer, pl011_dma_rx_poll, 0); mod_timer(&uap->dmarx.timer, - jiffies + - msecs_to_jiffies(uap->dmarx.poll_rate)); + jiffies + msecs_to_jiffies(uap->dmarx.poll_rate)); uap->dmarx.last_residue = PL011_DMA_BUFFER_SIZE; uap->dmarx.last_jiffies = jiffies; } @@ -1363,8 +1357,8 @@ static void pl011_stop_rx(struct uart_port *port) struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); - uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM| - UART011_PEIM|UART011_BEIM|UART011_OEIM); + uap->im &= ~(UART011_RXIM | UART011_RTIM | UART011_FEIM | + UART011_PEIM | UART011_BEIM | UART011_OEIM); pl011_write(uap->im, uap, REG_IMSC); pl011_dma_rx_stop(uap); @@ -1384,7 +1378,7 @@ static void pl011_enable_ms(struct uart_port *port) struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); - uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM; + uap->im |= UART011_RIMIM | UART011_CTSMIM | UART011_DCDMIM | UART011_DSRMIM; pl011_write(uap->im, uap, REG_IMSC); } @@ -1402,8 +1396,8 @@ __acquires(&uap->port.lock) */ if (pl011_dma_rx_available(uap)) { if (pl011_dma_rx_trigger_dma(uap)) { - dev_dbg(uap->port.dev, "could not trigger RX DMA job " - "fall back to interrupt mode again\n"); + dev_dbg(uap->port.dev, + "could not trigger RX DMA job fall back to interrupt mode again\n"); uap->im |= UART011_RXIM; pl011_write(uap->im, uap, REG_IMSC); } else { @@ -1413,8 +1407,7 @@ __acquires(&uap->port.lock) uap->dmarx.last_jiffies = jiffies; uap->dmarx.last_residue = PL011_DMA_BUFFER_SIZE; mod_timer(&uap->dmarx.timer, - jiffies + - msecs_to_jiffies(uap->dmarx.poll_rate)); + jiffies + msecs_to_jiffies(uap->dmarx.poll_rate)); } #endif } @@ -1561,18 +1554,17 @@ static irqreturn_t pl011_int(int irq, void *dev_id) do { check_apply_cts_event_workaround(uap); - pl011_write(status & ~(UART011_TXIS|UART011_RTIS| - UART011_RXIS), + pl011_write(status & ~(UART011_TXIS | UART011_RTIS | UART011_RXIS), uap, REG_ICR); - if (status & (UART011_RTIS|UART011_RXIS)) { + if (status & (UART011_RTIS | UART011_RXIS)) { if (pl011_dma_rx_running(uap)) pl011_dma_rx_irq(uap); else pl011_rx_chars(uap); } - if (status & (UART011_DSRMIS|UART011_DCDMIS| - UART011_CTSMIS|UART011_RIMIS)) + if (status & (UART011_DSRMIS | UART011_DCDMIS | + UART011_CTSMIS | UART011_RIMIS)) pl011_modem_status(uap); if (status & UART011_TXIS) pl011_tx_chars(uap, true); @@ -1712,7 +1704,7 @@ static int pl011_get_poll_char(struct uart_port *port) } static void pl011_put_poll_char(struct uart_port *port, - unsigned char ch) + unsigned char ch) { struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); @@ -1914,13 +1906,13 @@ static int sbsa_uart_startup(struct uart_port *port) } static void pl011_shutdown_channel(struct uart_amba_port *uap, - unsigned int lcrh) + unsigned int lcrh) { - unsigned long val; + unsigned long val; - val = pl011_read(uap, lcrh); - val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN); - pl011_write(val, uap, lcrh); + val = pl011_read(uap, lcrh); + val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN); + pl011_write(val, uap, lcrh); } /* @@ -2069,7 +2061,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, uap->dmarx.poll_rate = DIV_ROUND_UP(10000000, baud); #endif - if (baud > port->uartclk/16) + if (baud > port->uartclk / 16) quot = DIV_ROUND_CLOSEST(port->uartclk * 8, baud); else quot = DIV_ROUND_CLOSEST(port->uartclk * 4, baud); @@ -2151,9 +2143,9 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, * else we see data corruption. */ if (uap->vendor->oversampling) { - if ((baud >= 3000000) && (baud < 3250000) && (quot > 1)) + if (baud >= 3000000 && baud < 3250000 && quot > 1) quot -= 1; - else if ((baud > 3250000) && (quot > 2)) + else if (baud > 3250000 && quot > 2) quot -= 2; } /* Set baud rate */ @@ -2222,13 +2214,14 @@ static void pl011_config_port(struct uart_port *port, int flags) static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser) { int ret = 0; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA) ret = -EINVAL; if (ser->irq < 0 || ser->irq >= nr_irqs) ret = -EINVAL; if (ser->baud_base < 9600) ret = -EINVAL; - if (port->mapbase != (unsigned long) ser->iomem_base) + if (port->mapbase != (unsigned long)ser->iomem_base) ret = -EINVAL; return ret; } @@ -2537,7 +2530,7 @@ static void qdf2400_e44_putc(struct uart_port *port, unsigned char c) cpu_relax(); } -static void qdf2400_e44_early_write(struct console *con, const char *s, unsigned n) +static void qdf2400_e44_early_write(struct console *con, const char *s, unsigned int n) { struct earlycon_device *dev = con->data; @@ -2556,7 +2549,7 @@ static void pl011_putc(struct uart_port *port, unsigned char c) cpu_relax(); } -static void pl011_early_write(struct console *con, const char *s, unsigned n) +static void pl011_early_write(struct console *con, const char *s, unsigned int n) { struct earlycon_device *dev = con->data; @@ -2617,6 +2610,7 @@ static int __init pl011_early_console_setup(struct earlycon_device *device, return 0; } + OF_EARLYCON_DECLARE(pl011, "arm,pl011", pl011_early_console_setup); OF_EARLYCON_DECLARE(pl011, "arm,sbsa-uart", pl011_early_console_setup); @@ -2640,6 +2634,7 @@ qdf2400_e44_early_console_setup(struct earlycon_device *device, device->con->write = qdf2400_e44_early_write; return 0; } + EARLYCON_DECLARE(qdf2400_e44, qdf2400_e44_early_console_setup); #else @@ -2659,8 +2654,8 @@ static struct uart_driver amba_reg = { static int pl011_probe_dt_alias(int index, struct device *dev) { struct device_node *np; - static bool seen_dev_with_alias = false; - static bool seen_dev_without_alias = false; + static bool seen_dev_with_alias; + static bool seen_dev_without_alias; int ret = index; if (!IS_ENABLED(CONFIG_OF)) @@ -2676,7 +2671,7 @@ static int pl011_probe_dt_alias(int index, struct device *dev) ret = index; } else { seen_dev_with_alias = true; - if (ret >= ARRAY_SIZE(amba_ports) || amba_ports[ret] != NULL) { + if (ret >= ARRAY_SIZE(amba_ports) || amba_ports[ret]) { dev_warn(dev, "requested serial port %d not available.\n", ret); ret = index; } @@ -2710,7 +2705,7 @@ static int pl011_find_free_port(void) int i; for (i = 0; i < ARRAY_SIZE(amba_ports); i++) - if (amba_ports[i] == NULL) + if (!amba_ports[i]) return i; return -EBUSY; @@ -2916,9 +2911,12 @@ static int sbsa_uart_probe(struct platform_device *pdev) if (qdf2400_e44_present) { dev_info(&pdev->dev, "working around QDF2400 SoC erratum 44\n"); uap->vendor = &vendor_qdt_qdf2400_e44; - } else -#endif + } else { uap->vendor = &vendor_sbsa; + } +#else + uap->vendor = &vendor_sbsa; +#endif uap->reg_offset = uap->vendor->reg_offset; uap->fifosize = 32; @@ -3002,7 +3000,7 @@ static struct amba_driver pl011_driver = { static int __init pl011_init(void) { - printk(KERN_INFO "Serial: AMBA PL011 UART driver\n"); + pr_info("Serial: AMBA PL011 UART driver\n"); if (platform_driver_register(&arm_sbsa_uart_platform_driver)) pr_warn("could not register SBSA UART platform driver\n"); From patchwork Thu Nov 16 10:31:07 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Th=C3=A9o_Lebrun?= X-Patchwork-Id: 165748 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a59:b909:0:b0:403:3b70:6f57 with SMTP id t9csp3118148vqg; Thu, 16 Nov 2023 02:32:14 -0800 (PST) X-Google-Smtp-Source: AGHT+IEYNR7vhSIR2tWaW2hOg9gmF4tWtlF52ZFuOwMQdUsZoBWUfaNyXg3ey30Y98J+EnTVTPGN X-Received: by 2002:a17:90b:3e89:b0:280:74fc:6545 with SMTP id rj9-20020a17090b3e8900b0028074fc6545mr15448999pjb.24.1700130734478; Thu, 16 Nov 2023 02:32:14 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1700130734; cv=none; d=google.com; s=arc-20160816; b=W4Wz5MHHB2iQwkAAJQWeYQgzxTtaRAYmXdjMoMyTp6p2DknLstnNB0p7SCk3juvQoj lFTmy6L3taKS9E62Pbw3jKTA7NeHLrjH0F7eGRH6limBIfAa18pSCvt18bdyHw1bjgM/ ggzQR96wrUeM2/kHdZMy/E4NxAjZXb9I8hpgRSd1sEWMgEZ8yhY7zggIkv0ne9JWRpBu zZ5RKIv9MoU5ff12DhGStoPlZK7HWmxaAyVPXW1Ja/cBXDkca+U7gMWT1KV36EPdVXPt G/LUkjkqb3WA36qL0AEkBdLoqsodLqA8xzZ6ydriAV0qrf/4Jrufy8/NKvxrFYQtVSnA enBw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:cc:to:in-reply-to:references:message-id :content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=4lN48hLGgtpA2K973BPzgWFsxjYsrvJpsG7a0gWgGow=; fh=QQT0ysDV3C9K/ZwUoBeqi9VulQuaknzQuTSh/MRCItc=; b=JatKX2cZ3gV0nhDvSoUzf1gJ4G1ZW0ui9mUx9huIbihCuRs6usaSrVnW/eOSMhsF6k gRMBo8jpgkcXXpPs3UcPb6VI1b9hKNYPNHM8xhjX/nnvCds83dlfeDMeymDLYsJaIyXu h6dn8A9oBSinbq2J13u7Ct19EAlj/EVLHH2qbLVnthBJf9+l3AEzTJjgh4d05dy3OdRx YKzuUGHKP0pKQ8z8EQydcxMO4CqqK9p3Q9Jgy7sv/IToSCcaoWmHg8KZ5RouxVJHfADB xNeqFerVseYPHeg/pTXKUd8UP5f1uKNrL/tXiJpz+dKO/tjik9mN3r1sBRqOr6HHm2kD uUIg== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@bootlin.com header.s=gm1 header.b="kW5JAA/3"; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:7 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=REJECT sp=REJECT dis=NONE) header.from=bootlin.com Received: from snail.vger.email (snail.vger.email. [2620:137:e000::3:7]) by mx.google.com with ESMTPS id q11-20020a170902dacb00b001cc34736568si12484013plx.566.2023.11.16.02.32.14 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 16 Nov 2023 02:32:14 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:7 as permitted sender) client-ip=2620:137:e000::3:7; Authentication-Results: mx.google.com; dkim=pass header.i=@bootlin.com header.s=gm1 header.b="kW5JAA/3"; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:7 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=REJECT sp=REJECT dis=NONE) header.from=bootlin.com Received: from out1.vger.email (depot.vger.email [IPv6:2620:137:e000::3:0]) by snail.vger.email (Postfix) with ESMTP id 08CBC81A1EB7; Thu, 16 Nov 2023 02:31:43 -0800 (PST) X-Virus-Status: Clean X-Virus-Scanned: clamav-milter 0.103.11 at snail.vger.email Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1345013AbjKPKbh (ORCPT + 29 others); Thu, 16 Nov 2023 05:31:37 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:36134 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230315AbjKPKba (ORCPT ); Thu, 16 Nov 2023 05:31:30 -0500 Received: from relay3-d.mail.gandi.net (relay3-d.mail.gandi.net [IPv6:2001:4b98:dc4:8::223]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 6DED2D1; Thu, 16 Nov 2023 02:31:26 -0800 (PST) Received: by mail.gandi.net (Postfix) with ESMTPSA id 635AF60010; Thu, 16 Nov 2023 10:31:24 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1700130684; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version:content-type:content-type: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=4lN48hLGgtpA2K973BPzgWFsxjYsrvJpsG7a0gWgGow=; b=kW5JAA/3sAxvjEU8LiacB3LHGZ1xiT4vu56zT+KTrSd8Nui8pdSQL+OD0HcaH+CDvG++h4 tZY1M4iD/g3r/V/k+oEKiVwWiQyGDf6KVQqisqPSk79GQ98c6/Znad7W36Rfhkw2azIyK0 ROBu+2kbKYahO7DliybsDrzUe6xeb9RyXf+w72XC7XcmRKsksvBdbf22oms1115TfBtT2/ 6ZjbupXxboGercs1muPCvhApQCC1GsHTAVSPp7NvL7w3L4WkLjdthfQowZSTy7K7goVCNK 8ePn2UIhBEd/ZJYOIXPuwsLPVssLyzvxj9S3ShbYzl8tuC1V/IhhQH+av7zaKg== From: =?utf-8?q?Th=C3=A9o_Lebrun?= Date: Thu, 16 Nov 2023 11:31:07 +0100 Subject: [PATCH v2 4/5] tty: serial: amba-pl011: replace TIOCMBIT macros by static functions MIME-Version: 1.0 Message-Id: <20231116-mbly-uart-v2-4-863f665ce520@bootlin.com> References: <20231116-mbly-uart-v2-0-863f665ce520@bootlin.com> In-Reply-To: <20231116-mbly-uart-v2-0-863f665ce520@bootlin.com> To: Russell King , Greg Kroah-Hartman , Jiri Slaby Cc: linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org, Linus Walleij , =?utf-8?q?Gr=C3=A9gory_Clement?= , Alexandre Belloni , Thomas Petazzoni , Vladimir Kondratiev , Tawfik Bayouk , =?utf-8?q?Th=C3=A9o_Lebrun?= X-Mailer: b4 0.12.3 X-GND-Sasl: theo.lebrun@bootlin.com X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED, SPF_HELO_PASS,SPF_PASS,T_SCC_BODY_TEXT_LINE,URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-Greylist: Sender passed SPF test, not delayed by milter-greylist-4.6.4 (snail.vger.email [0.0.0.0]); Thu, 16 Nov 2023 02:31:44 -0800 (PST) X-getmail-retrieved-from-mailbox: INBOX X-GMAIL-THRID: 1782716284691010448 X-GMAIL-MSGID: 1782716284691010448 The driver uses two TIOCMBIT macros inside pl011_{get,set}_mctrl to simplify the logic. Those look scary to checkpatch because they contain ifs without do-while loops. Avoid the macros by creating small equivalent static functions; that lets the compiler do its type checking & avoids checkpatch errors. For the second instance __assign_bit is not usable because it deals with unsigned long pointers whereas we have an unsigned int in pl011_set_mctrl. Reviewed-by: Linus Walleij Signed-off-by: Théo Lebrun --- drivers/tty/serial/amba-pl011.c | 45 ++++++++++++++++++++++------------------- 1 file changed, 24 insertions(+), 21 deletions(-) diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index d56607957158..bb3082c4d35c 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -1594,6 +1594,12 @@ static unsigned int pl011_tx_empty(struct uart_port *port) 0 : TIOCSER_TEMT; } +static void pl011_maybe_set_bit(bool cond, unsigned int *ptr, unsigned int mask) +{ + if (cond) + *ptr |= mask; +} + static unsigned int pl011_get_mctrl(struct uart_port *port) { struct uart_amba_port *uap = @@ -1601,18 +1607,22 @@ static unsigned int pl011_get_mctrl(struct uart_port *port) unsigned int result = 0; unsigned int status = pl011_read(uap, REG_FR); -#define TIOCMBIT(uartbit, tiocmbit) \ - if (status & uartbit) \ - result |= tiocmbit + pl011_maybe_set_bit(status & UART01x_FR_DCD, &result, TIOCM_CAR); + pl011_maybe_set_bit(status & uap->vendor->fr_dsr, &result, TIOCM_DSR); + pl011_maybe_set_bit(status & uap->vendor->fr_cts, &result, TIOCM_CTS); + pl011_maybe_set_bit(status & uap->vendor->fr_ri, &result, TIOCM_RNG); - TIOCMBIT(UART01x_FR_DCD, TIOCM_CAR); - TIOCMBIT(uap->vendor->fr_dsr, TIOCM_DSR); - TIOCMBIT(uap->vendor->fr_cts, TIOCM_CTS); - TIOCMBIT(uap->vendor->fr_ri, TIOCM_RNG); -#undef TIOCMBIT return result; } +static void pl011_assign_bit(bool cond, unsigned int *ptr, unsigned int mask) +{ + if (cond) + *ptr |= mask; + else + *ptr &= ~mask; +} + static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl) { struct uart_amba_port *uap = @@ -1621,23 +1631,16 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl) cr = pl011_read(uap, REG_CR); -#define TIOCMBIT(tiocmbit, uartbit) \ - if (mctrl & tiocmbit) \ - cr |= uartbit; \ - else \ - cr &= ~uartbit - - TIOCMBIT(TIOCM_RTS, UART011_CR_RTS); - TIOCMBIT(TIOCM_DTR, UART011_CR_DTR); - TIOCMBIT(TIOCM_OUT1, UART011_CR_OUT1); - TIOCMBIT(TIOCM_OUT2, UART011_CR_OUT2); - TIOCMBIT(TIOCM_LOOP, UART011_CR_LBE); + pl011_assign_bit(mctrl & TIOCM_RTS, &cr, UART011_CR_RTS); + pl011_assign_bit(mctrl & TIOCM_DTR, &cr, UART011_CR_DTR); + pl011_assign_bit(mctrl & TIOCM_OUT1, &cr, UART011_CR_OUT1); + pl011_assign_bit(mctrl & TIOCM_OUT2, &cr, UART011_CR_OUT2); + pl011_assign_bit(mctrl & TIOCM_LOOP, &cr, UART011_CR_LBE); if (port->status & UPSTAT_AUTORTS) { /* We need to disable auto-RTS if we want to turn RTS off */ - TIOCMBIT(TIOCM_RTS, UART011_CR_RTSEN); + pl011_assign_bit(mctrl & TIOCM_RTS, &cr, UART011_CR_RTSEN); } -#undef TIOCMBIT pl011_write(cr, uap, REG_CR); } From patchwork Thu Nov 16 10:31:08 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Th=C3=A9o_Lebrun?= X-Patchwork-Id: 165749 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a59:b909:0:b0:403:3b70:6f57 with SMTP id t9csp3118159vqg; Thu, 16 Nov 2023 02:32:15 -0800 (PST) X-Google-Smtp-Source: AGHT+IHP1pTNUdaX4w5+bmCfIXi757cfasaz2RYGEMpuT3iAY5U/YocNKrf3hBnNsIWZl123V1sP X-Received: by 2002:a17:90b:1e12:b0:280:a6a6:9b1b with SMTP id pg18-20020a17090b1e1200b00280a6a69b1bmr13791523pjb.19.1700130735378; Thu, 16 Nov 2023 02:32:15 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1700130735; cv=none; d=google.com; s=arc-20160816; b=BwYa1AmdxzXq5S4ujvWyC3V8NVA0weSRmBiKWweo9LXh984oC/ExJmTVvOfcosXMja ytXrrbTYyt3EYJPnuM7PzmD2x7mN+skt5SAoGbjd0q6VSnpzJ2Y3Cv8bMR5lb+78ydje YGhp/gmGC8uZL+UFiCBsF/5PKGNqId2BCU+1wHzKHX8MM45m8BCLECKXYmDEkQt4DoIR dSTCiDryZ04wj6j1FtycGJnkR/vg9oOxEKM72+thq/e/lkAbu152kVfTLFty2sqG95lA 8pJpvy3G90isEGS7wLHBmSM/cOTnymMY1U1z8HSXJlb7aINLTF/tFa0RfFGud/1o3CPl NGIA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:cc:to:in-reply-to:references:message-id :content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=8Gilx4H3RKP8/lZDTxCW04nyKKjKNCSF+csRLPdNS2A=; fh=QQT0ysDV3C9K/ZwUoBeqi9VulQuaknzQuTSh/MRCItc=; b=0i8kX4ggGgwxIZYI8ySbkNTJT5MDP/APBGVSsFhom8tw5egJyNcIZymdqBNDUlx0Yy JQw+sJoiyjQf7mjitRm39bhXPz8/mE6eqAFe3/hBzCC+PYg78atDD0uIntxV56EAsM2C 2P7bqHlo7wHu5qI2e2uVbaanPPT3PTCqnurSWsIVZaVE88wZMWJQwlx0yFOUAaS+y+Dz vsQUW/ZUq+dUyVk1KmciZ5zWrxkkEgCI0eBsEgupwg4Fsi/5YJClcp2pylmk50kJQqss rvPO7fcwvO5fpPwUMrq1s1IZpyJMSlbEqixgNJLfwCzRkr2uDqvB1aKTjDlddDL8mvGb 7wXw== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@bootlin.com header.s=gm1 header.b=JGs2E4Pm; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.37 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=REJECT sp=REJECT dis=NONE) header.from=bootlin.com Received: from snail.vger.email (snail.vger.email. [23.128.96.37]) by mx.google.com with ESMTPS id pf1-20020a17090b1d8100b002800879f482si1830129pjb.87.2023.11.16.02.32.14 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 16 Nov 2023 02:32:15 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.37 as permitted sender) client-ip=23.128.96.37; Authentication-Results: mx.google.com; dkim=pass header.i=@bootlin.com header.s=gm1 header.b=JGs2E4Pm; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.37 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=REJECT sp=REJECT dis=NONE) header.from=bootlin.com Received: from out1.vger.email (depot.vger.email [IPv6:2620:137:e000::3:0]) by snail.vger.email (Postfix) with ESMTP id E3B1881A6E79; Thu, 16 Nov 2023 02:31:53 -0800 (PST) X-Virus-Status: Clean X-Virus-Scanned: clamav-milter 0.103.11 at snail.vger.email Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1345023AbjKPKbj (ORCPT + 29 others); Thu, 16 Nov 2023 05:31:39 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:36152 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233066AbjKPKbb (ORCPT ); Thu, 16 Nov 2023 05:31:31 -0500 Received: from relay3-d.mail.gandi.net (relay3-d.mail.gandi.net [IPv6:2001:4b98:dc4:8::223]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B846D1AE; Thu, 16 Nov 2023 02:31:26 -0800 (PST) Received: by mail.gandi.net (Postfix) with ESMTPSA id DEF996001C; Thu, 16 Nov 2023 10:31:24 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1700130685; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version:content-type:content-type: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=8Gilx4H3RKP8/lZDTxCW04nyKKjKNCSF+csRLPdNS2A=; b=JGs2E4Pm4ttEACnrdJLtXtseCSq4ZCZOGkeVwb0XK7HwE5wEyzJYbuUSED/lJJXzwU5+Jz aydtnjt7I4CmF/JEs83zg0J0OL7YFkQCtUOpViTQP640eIQmc80KockT651UVFfChIaBEx bWqZRjnMXbL4C6siWB88VN3om1jpFOnm16vCvWIuHcIWrLYzIydBY3eG5P1/4fgwTZ0rsU YguJIdOi87LeLchXoAYe556YcEtxiu1cSItiTjOakmvbo2gOT1G6VEZ19sjGs6PDSDIOOy S0F7f6gzyez5k2vVXdB8rMs+LPBa2XcIrsa40K0bdNc6PF8IaPR/kQvNFQyL8w== From: =?utf-8?q?Th=C3=A9o_Lebrun?= Date: Thu, 16 Nov 2023 11:31:08 +0100 Subject: [PATCH v2 5/5] tty: serial: amba-pl011: unindent pl011_console_get_options function body MIME-Version: 1.0 Message-Id: <20231116-mbly-uart-v2-5-863f665ce520@bootlin.com> References: <20231116-mbly-uart-v2-0-863f665ce520@bootlin.com> In-Reply-To: <20231116-mbly-uart-v2-0-863f665ce520@bootlin.com> To: Russell King , Greg Kroah-Hartman , Jiri Slaby Cc: linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org, Linus Walleij , =?utf-8?q?Gr=C3=A9gory_Clement?= , Alexandre Belloni , Thomas Petazzoni , Vladimir Kondratiev , Tawfik Bayouk , =?utf-8?q?Th=C3=A9o_Lebrun?= X-Mailer: b4 0.12.3 X-GND-Sasl: theo.lebrun@bootlin.com X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED, SPF_HELO_PASS,SPF_PASS,T_SCC_BODY_TEXT_LINE,URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-Greylist: Sender passed SPF test, not delayed by milter-greylist-4.6.4 (snail.vger.email [0.0.0.0]); Thu, 16 Nov 2023 02:31:54 -0800 (PST) X-getmail-retrieved-from-mailbox: INBOX X-GMAIL-THRID: 1782716286103724550 X-GMAIL-MSGID: 1782716286103724550 The whole function body is encapsulated inside an if-condition. Reverse the if logic and early return to remove one indentation level. Also turn two nested ifs into a single one at the end of the function. Reviewed-by: Linus Walleij Signed-off-by: Théo Lebrun Reviewed-by: Ilpo Järvinen --- drivers/tty/serial/amba-pl011.c | 42 ++++++++++++++++++++--------------------- 1 file changed, 21 insertions(+), 21 deletions(-) diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index bb3082c4d35c..5774d48c7f16 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -2369,34 +2369,34 @@ pl011_console_write(struct console *co, const char *s, unsigned int count) static void pl011_console_get_options(struct uart_amba_port *uap, int *baud, int *parity, int *bits) { - if (pl011_read(uap, REG_CR) & UART01x_CR_UARTEN) { - unsigned int lcr_h, ibrd, fbrd; + unsigned int lcr_h, ibrd, fbrd; - lcr_h = pl011_read(uap, REG_LCRH_TX); + if (!(pl011_read(uap, REG_CR) & UART01x_CR_UARTEN)) + return; - *parity = 'n'; - if (lcr_h & UART01x_LCRH_PEN) { - if (lcr_h & UART01x_LCRH_EPS) - *parity = 'e'; - else - *parity = 'o'; - } + lcr_h = pl011_read(uap, REG_LCRH_TX); - if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7) - *bits = 7; + *parity = 'n'; + if (lcr_h & UART01x_LCRH_PEN) { + if (lcr_h & UART01x_LCRH_EPS) + *parity = 'e'; else - *bits = 8; + *parity = 'o'; + } + + if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7) + *bits = 7; + else + *bits = 8; - ibrd = pl011_read(uap, REG_IBRD); - fbrd = pl011_read(uap, REG_FBRD); + ibrd = pl011_read(uap, REG_IBRD); + fbrd = pl011_read(uap, REG_FBRD); - *baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd); + *baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd); - if (uap->vendor->oversampling) { - if (pl011_read(uap, REG_CR) - & ST_UART011_CR_OVSFACT) - *baud *= 2; - } + if (uap->vendor->oversampling && + (pl011_read(uap, REG_CR) & ST_UART011_CR_OVSFACT)) { + *baud *= 2; } }