From patchwork Wed Aug 2 12:37:41 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 129854 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a59:9f41:0:b0:3e4:2afc:c1 with SMTP id v1csp484254vqx; Wed, 2 Aug 2023 07:09:09 -0700 (PDT) X-Google-Smtp-Source: APBJJlFAaWpxi+Fgls5BGXiCE3D1ZB2Et6kLTmCgk/i1JNYYs0DZ6QOdArOqG3RcLeGLMAR3GKau X-Received: by 2002:a05:6a00:1bc9:b0:677:3439:874a with SMTP id o9-20020a056a001bc900b006773439874amr13495207pfw.3.1690985348985; Wed, 02 Aug 2023 07:09:08 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1690985348; cv=none; d=google.com; s=arc-20160816; b=HyitL92pVTOMovXMeRWoaGCGH18k95P9ow3iUsQtmlOugbXMWZR0s7juCCRB0/7vsW uxGeyMCtXYFXzOFNOD/yRSpnukQljjOFzu1cxGh+MJ4e0oxRacd3O+zKgf/SdJ+Nb9ht QVOKjXjNyl0SEz8Mq7Qj/RXD0Y/P0d2zxY5D+4EruHpQvrXawCHu5pJ8OUW5QNfWy0xU 7/G3hEocvS1bXBiCa12xBu/47iFYNBZORG24CZftC+/AC1FOgbX7fUm/l48bwentpCDb ufUpXK3hm7M8YX3UQFvYVaeXQoFVUnifo8hJFh5vLeBkTOWFH0App6FGUYLoBcqnQOxL 0vPw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:cc:to:in-reply-to:references:message-id :content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=nVGvOyENWPB+Ee8crCfmI+rgll1/ig00HScPt7330D4=; fh=00i92FozdW145dv//HsHG4vo6csyYOdIKUCuPIVTXBE=; b=k74/sTS5AhkfHnQ2offXIrhoGNu27OTH459YivhJNa81D6IgeBfJvWYu571bN4sCbA p9GrEQlObSiR/IHdJZOj0fey0I2pnTYFOX1G8dvTswq7WfdJ2yPqRNK7IU9cmvWdBTpG Z6lVjrLS8jI7kaqA1IPGBnAtIHHtwfrHmiIw0lP4cLOaGobZdTl1wcsBmrPpzZQ8lZqH 6UgCT5AuYl4FlQwGz0Y7mEiHbR9El27QZ91BzaOFlibahxfWMh0gJmvcu0H4/2sAIUJS xg20NmZQn84cQ/JweHEOq9e01fCvD5Dh8J5HVy7XGwzTbIdTrip5RI08LuXjN2UVCtAx SxSQ== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=N5qQww5I; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id n20-20020a637214000000b0053f265b0eecsi10538311pgc.133.2023.08.02.07.08.36; Wed, 02 Aug 2023 07:09:08 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=N5qQww5I; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234517AbjHBMiX (ORCPT + 99 others); Wed, 2 Aug 2023 08:38:23 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58386 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233820AbjHBMiU (ORCPT ); Wed, 2 Aug 2023 08:38:20 -0400 Received: from mail-lj1-x22a.google.com (mail-lj1-x22a.google.com [IPv6:2a00:1450:4864:20::22a]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 7AA5026B6 for ; Wed, 2 Aug 2023 05:38:18 -0700 (PDT) Received: by mail-lj1-x22a.google.com with SMTP id 38308e7fff4ca-2b9aa1d3029so102618141fa.2 for ; Wed, 02 Aug 2023 05:38:18 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1690979897; x=1691584697; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=nVGvOyENWPB+Ee8crCfmI+rgll1/ig00HScPt7330D4=; b=N5qQww5IukOtxw56VLO9mfSPjceMrjMTBxnhHfSkq2K+OdHHa5vAysSRIciF173mW+ dC4sAMmDy+9GF9zKgx1nw/E/FOv/2xRflV+DEOGJNLxxD0G9iV+UsksDvmxEVtJUf1Z9 nbm4sGKa8AuZ8+QUh15JUih5Uytj0dx5sdgyi7ngOFatzn4pNmM/6yhqDUM5jUDVuOdI i7WvjiSMMN6yTGiq5nzKmc6+vYpbXkuKUgMaolyTDXlo3CfIHUslG2dJWk9YKQGyovI9 iKCueOEU4CDzEziapkOE4HbbVZQnIdIgwkL1IIWsbmI4N6L1SzvxELmZIMzqrD9ny9Fv DAWw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1690979897; x=1691584697; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=nVGvOyENWPB+Ee8crCfmI+rgll1/ig00HScPt7330D4=; b=hNOxC7rxvnXK5Jd01xXOyGHyTgeRncew69aocbmxJpZViw9s+s+qzjbW+8gH9DuGvX WY8jI23k0U5Vtfot/SJoN21IlnpqHRpoCLhWx2fIzj2jsZDe283037IG1qQ/trngKr0p PUG4DQRJ1fvUba/6ipeSSFiCytMrqyTJiXG0opZGVDHlYjX1sHWQpMsziEZ+y46YRkcg K7HqOjwV65JtzJjV2Tl/8qBFQW3vAB5FgX0op+lmu1gcFp5xFUCPL/DAqz7+RklOKVbV Ox6/EL+2YjfOQ33QtU4kwXshOZOPZ8CsUvAi7SzBHb3g7TeVDeHbTZErKZK1tJjb85Pc ZkaA== X-Gm-Message-State: ABy/qLbjBevLbBnnFwOoEvDDXhoDOS4MVRMwRO4MMFeYqJtMV6gCQFo5 xKU1QAx7nRS3Vx4kzfkY5BPoNQ== X-Received: by 2002:a2e:780e:0:b0:2b6:cf0f:1fbf with SMTP id t14-20020a2e780e000000b002b6cf0f1fbfmr4973816ljc.42.1690979896697; Wed, 02 Aug 2023 05:38:16 -0700 (PDT) Received: from [192.168.1.101] (abyk53.neoplus.adsl.tpnet.pl. [83.9.30.53]) by smtp.gmail.com with ESMTPSA id h8-20020a2e9ec8000000b002b9e5fe86dasm1897050ljk.81.2023.08.02.05.38.14 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 02 Aug 2023 05:38:15 -0700 (PDT) From: Konrad Dybcio Date: Wed, 02 Aug 2023 14:37:41 +0200 Subject: [PATCH v13 01/10] cpufreq: blocklist MSM8998 in cpufreq-dt-platdev MIME-Version: 1.0 Message-Id: <20230217-topic-cpr3h-v13-1-d01cff1c54cf@linaro.org> References: <20230217-topic-cpr3h-v13-0-d01cff1c54cf@linaro.org> In-Reply-To: <20230217-topic-cpr3h-v13-0-d01cff1c54cf@linaro.org> To: AngeloGioacchino Del Regno , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Viresh Kumar , Nishanth Menon , Stephen Boyd , Niklas Cassel , Liam Girdwood , Mark Brown , Conor Dooley , "Rafael J. Wysocki" , Viresh Kumar , Ulf Hansson Cc: Robert Marko , linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-pm@vger.kernel.org, Jeffrey Hugo , Marijn Suijten , Konrad Dybcio , AngeloGioacchino Del Regno X-Mailer: b4 0.12.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1690979891; l=931; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=citMFauTCxszFsf6NvxU1uORtQU48kMUG74vy4bw6Fw=; b=vKpsJxYpL89MCAJpT4bYryhsP3F8N2YjfbmPybrBH8o8AH6zoFZAEaqpCSBpfYg705p/lC8t4 CA2e301LwF4A2jsei2FfgpQKziyW8u2j9tEhzOWc12k3DeH7FwhnGZk X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED, SPF_HELO_NONE,SPF_PASS,T_SCC_BODY_TEXT_LINE,URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-getmail-retrieved-from-mailbox: INBOX X-GMAIL-THRID: 1773123933460386485 X-GMAIL-MSGID: 1773126653052686690 From: AngeloGioacchino Del Regno Add the MSM8998 to the blocklist since the CPU scaling on this platform is handled by a separate driver. Signed-off-by: AngeloGioacchino Del Regno Tested-by: Jeffrey Hugo Signed-off-by: Konrad Dybcio --- drivers/cpufreq/cpufreq-dt-platdev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c index e2b20080de3a..adb3579a1fee 100644 --- a/drivers/cpufreq/cpufreq-dt-platdev.c +++ b/drivers/cpufreq/cpufreq-dt-platdev.c @@ -143,6 +143,7 @@ static const struct of_device_id blocklist[] __initconst = { { .compatible = "qcom,apq8096", }, { .compatible = "qcom,msm8996", }, + { .compatible = "qcom,msm8998", }, { .compatible = "qcom,qcs404", }, { .compatible = "qcom,sa8155p" }, { .compatible = "qcom,sa8540p" }, From patchwork Wed Aug 2 12:37:42 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 129831 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a59:9f41:0:b0:3e4:2afc:c1 with SMTP id v1csp455126vqx; Wed, 2 Aug 2023 06:25:39 -0700 (PDT) X-Google-Smtp-Source: APBJJlFPIChLzaMPh3OIycRi2Andy25u4JiYMi04ZmeoK3JZT2WN497hMIsdk0BjxswLxml4IvXm X-Received: by 2002:a05:6a20:4419:b0:137:8ddf:4647 with SMTP id ce25-20020a056a20441900b001378ddf4647mr19084571pzb.2.1690982738611; Wed, 02 Aug 2023 06:25:38 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1690982738; cv=none; d=google.com; s=arc-20160816; b=T50BVTHxKGz8HIBD7GZSEQoFYrPCGfE24dboBClP+OLTVql8bC7jwNMwRNfXR+fbcu LDesZUTN0TGWRiF97yUiwl9gkWSmPDOONHFwPO1XMT5Zk/1CUZBwuI1OtmHF7uwJySr9 l2HrNKNENrKsOxNMFNyfrG3NGtqHB2DrVikwzoOpUSfij7D66Q+cpFvz0XNA3owrTJWX 6voZb5savSvhgJ+pCGlZfKzo2TbGdxizW+0YFIBcVDZzK8HTb63fkLPgbZA+yfLYuMjS 3RvcGT6nn0VlqIdxYByrInNbaSiJmbhm1pY8glDqmTdD6bxTfu73xEwfGv1VDSZnqgUK lTog== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:cc:to:in-reply-to:references:message-id :content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=z/arHXwGDpg0PaLjq3SVx/1vOD3CQunADkBlXywyjWc=; fh=00i92FozdW145dv//HsHG4vo6csyYOdIKUCuPIVTXBE=; b=Qj2n5yEPBoX7pjkXb5lQ3HRjb20qlkF/0blFz1IfbtxqIwvM46cllp2VtCt3km0nBo uvEOc6+OPwvq5i6Ln+x1PvuaQR/4oonmd5PmIz9hl/kjfUI346oHfkSkx0G46V3iGccc +FXDzg1gGShm9egOCqpx9/h0KDgAm/19lblbz4dcQ+A40tvCn9oDUAtTi2GYDQc3FTWl tymCnMRAFbX6+SDALafId3qR83uQhjxWsETbuW0h0Wx4PqM1l6G1CNEK5iayNWhXYk3B 7V71iUKLJissoGQVauBHimTxcIsMGdB2zLLX4oe+ymOsbznfcw4AjzGfI9UlEpk3Hv0r uCkw== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=pzjM00rc; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id 129-20020a630187000000b00563f2833cdesi10749291pgb.112.2023.08.02.06.25.15; Wed, 02 Aug 2023 06:25:38 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=pzjM00rc; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234552AbjHBMic (ORCPT + 99 others); Wed, 2 Aug 2023 08:38:32 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58420 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234511AbjHBMiW (ORCPT ); Wed, 2 Aug 2023 08:38:22 -0400 Received: from mail-lj1-x232.google.com (mail-lj1-x232.google.com [IPv6:2a00:1450:4864:20::232]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8B4F42706 for ; Wed, 2 Aug 2023 05:38:20 -0700 (PDT) Received: by mail-lj1-x232.google.com with SMTP id 38308e7fff4ca-2b9fa64db41so30005821fa.1 for ; Wed, 02 Aug 2023 05:38:20 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1690979899; x=1691584699; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=z/arHXwGDpg0PaLjq3SVx/1vOD3CQunADkBlXywyjWc=; b=pzjM00rclJ3O6oMZD6Vt6W+n1moVRi5fOb2JrgpCj8wKpTq4/z6+RtGZEJvxRXBtZV WndP5sU5ASyp3G7zpmVg160TH7sMgywghbM7AA0LejUZIJxH0ddd2J6md27Jjr+Z2whu rK2ZKj46vxytOk853vjyuAEJRubLDfTTimGagp6St25tx9awbuMupq6n//43oG4a7Vaf z75+e1M/CHOF3jNdO4bQ6PnrGeIE2OZBu9MGnLUHr58UGXwtPTLNQUYlRP99ps8KSEfg C4Ao2mTaasEFK5MMVn//gdktkxTHXEXNzocbeJe4jJRNO9ep1WdFKjaduBY1Mwy3NqQM GMtQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1690979899; x=1691584699; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=z/arHXwGDpg0PaLjq3SVx/1vOD3CQunADkBlXywyjWc=; b=VK4CyFkgaDV7O4vMRVbXe9klAL0UunBOB2QqF8WSofd1fCWVSeix/o+9MJ/O7z1ihj JB5qnt558Ur5QgXE/ooEusIkAXckkNixTB87IGMfcRhwJm57lKQWKy7Gvwy83sMJN2R3 cLCMw7VDWdj0+hxZUWPU34cWDcTFWhBcrT9tAkFHtUYvXlEKRtwTQUJ/XyCVbQ6WXA4J Q2O/Jy/K/cW9lkbZGVWIHZ1bFH/WRwruxjmOM0Jx2Ewg1NQU0ldleVudqEhU6iLwkfIi xNwbGpVX9AAoR+CYB0N7lL5lhu28maTiPGv9BEGJLfKO6yf51FdLnGfZp3RmsOSD6LNx d2LA== X-Gm-Message-State: ABy/qLb1BZYM36Z9dABeQvNRg03xL6rWsbe5wCazOe0uVlgFzBpnF3K7 qb/5ewS3uBJ2IdIVAvEEPn36RA== X-Received: by 2002:a2e:980c:0:b0:2b9:b41a:aa66 with SMTP id a12-20020a2e980c000000b002b9b41aaa66mr5429905ljj.20.1690979898810; Wed, 02 Aug 2023 05:38:18 -0700 (PDT) Received: from [192.168.1.101] (abyk53.neoplus.adsl.tpnet.pl. [83.9.30.53]) by smtp.gmail.com with ESMTPSA id h8-20020a2e9ec8000000b002b9e5fe86dasm1897050ljk.81.2023.08.02.05.38.16 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 02 Aug 2023 05:38:18 -0700 (PDT) From: Konrad Dybcio Date: Wed, 02 Aug 2023 14:37:42 +0200 Subject: [PATCH v13 02/10] MAINTAINERS: Add entry for Qualcomm CPRv3/v4/Hardened driver MIME-Version: 1.0 Message-Id: <20230217-topic-cpr3h-v13-2-d01cff1c54cf@linaro.org> References: <20230217-topic-cpr3h-v13-0-d01cff1c54cf@linaro.org> In-Reply-To: <20230217-topic-cpr3h-v13-0-d01cff1c54cf@linaro.org> To: AngeloGioacchino Del Regno , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Viresh Kumar , Nishanth Menon , Stephen Boyd , Niklas Cassel , Liam Girdwood , Mark Brown , Conor Dooley , "Rafael J. Wysocki" , Viresh Kumar , Ulf Hansson Cc: Robert Marko , linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-pm@vger.kernel.org, Jeffrey Hugo , Marijn Suijten , Konrad Dybcio , AngeloGioacchino Del Regno X-Mailer: b4 0.12.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1690979891; l=984; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=2YiA3nGNcsVPCq1IwlTdMAqStD1lE3rx04PXJ5i83As=; b=/aE9/NxMNY3o+ds1NwBS03mBqZjAuS1DKfNpv8RGPTcD4ywBrlNoAWFXhqTRhVaZtzCiJY7vE My7YAfaWacCDkCONSmD6pJ4K1kNF+ar5KWeXMz0/H/aKp3zvAJxU7E8 X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED, SPF_HELO_NONE,SPF_PASS,T_SCC_BODY_TEXT_LINE,URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-getmail-retrieved-from-mailbox: INBOX X-GMAIL-THRID: 1773123916273563267 X-GMAIL-MSGID: 1773123916273563267 From: AngeloGioacchino Del Regno Add maintainers entry for the Qualcomm CPR3/CPR4/CPRh driver. Signed-off-by: AngeloGioacchino Del Regno [Konrad: rebase, update AGdR's email] Tested-by: Jeffrey Hugo Signed-off-by: Konrad Dybcio --- MAINTAINERS | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 1089ef3319f2..a7514261b157 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17621,6 +17621,12 @@ S: Maintained F: Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml F: drivers/genpd/qcom/cpr.c +QUALCOMM CORE POWER REDUCTION v3/v4/Hardened AVS DRIVER +M: AngeloGioacchino Del Regno +S: Maintained +F: Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml +F: drivers/soc/qcom/cpr3.c + QUALCOMM CPUFREQ DRIVER MSM8996/APQ8096 M: Ilia Lin L: linux-pm@vger.kernel.org From patchwork Wed Aug 2 12:37:43 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 129840 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a59:9f41:0:b0:3e4:2afc:c1 with SMTP id v1csp464529vqx; Wed, 2 Aug 2023 06:40:52 -0700 (PDT) X-Google-Smtp-Source: APBJJlGN+9w9meC1RF3X16yPBeuUXoaTuO1DzM6MhHHIcEeMnnRtRrz2618e/7EygWP0obZ3aqmR X-Received: by 2002:a5d:8849:0:b0:783:63d6:4cb with SMTP id t9-20020a5d8849000000b0078363d604cbmr16270234ios.14.1690983652278; Wed, 02 Aug 2023 06:40:52 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1690983652; cv=none; d=google.com; s=arc-20160816; b=DU2lCsYW0KohysW6XuH4O5Vsosoj67B/43ze54ts796QWV8WqId7nHrlNkJkSSC8UG IMqrMcXJQtXGcKUwftB7vZMe5LSG624F2+bTcQiF+qW7f3vEpFD5FGdoNqnkAnwSZ1LH f12JAZoqV5XiVCPjSlfbik28ULWI8V+XLnBFFgK0qbzULwx7i++cT3/iIgBtKB+ZeQnS cBDH8PUtIFyQqTnpYmFcu8AIB++gImp3Srx5QffChiqISbHPsC3SeIlzre4XhvOJ2aF2 gOV5O5wPCbPwIpklCjyTdEw2T1mlTj+v8M/Wcq4h5H/WSWMbF3NkMVOrL5qZ+5k0Zu38 7kCg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:cc:to:in-reply-to:references:message-id :content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=p8ibCsCefa6ZAWVplZiGBVLhq2a/cqsLVlyXMZQI290=; fh=ahM2wzW2Lmty1oF7VdzlQW5IFLwtWPXmLAKhzW6r3bw=; b=E5rWS1Y8uz1wN3cNGwupz3Qhunz/xsJ1jx+WH5HwxkqFF5WIug46QZ7lt0IJPTsr7U aXDCZ9unF49BrWYuGUjgO2ZwfAr0I1MLMtzj6zC4WxUKYehRXlb6mn9ePangQSC4m/oT Qcx3gw88kbL0yY+jt62N1hvH4PvCts1QL8H099/8bpt2Vo3XiV7LtRxOhnM5NmaX5Tj9 W935RsSAh58ndEj5f3BemLwSFB4/VMGzOWVr0JS9HpALBnmw4kjoLGgj0Nfbi3IU4kEu pE0YKUbWPK9MXb2IZD+t6VfLvmHVmjMlK2ggMW0n+4XTKPTeLShM8gXaxFa/nyrUH2fI nidw== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b="L/WAhGYg"; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id d12-20020a63f24c000000b00563da4d2a77si1850039pgk.867.2023.08.02.06.40.38; Wed, 02 Aug 2023 06:40:52 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b="L/WAhGYg"; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234572AbjHBMij (ORCPT + 99 others); Wed, 2 Aug 2023 08:38:39 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58562 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234525AbjHBMia (ORCPT ); Wed, 2 Aug 2023 08:38:30 -0400 Received: from mail-lj1-x233.google.com (mail-lj1-x233.google.com [IPv6:2a00:1450:4864:20::233]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 7771F270F for ; Wed, 2 Aug 2023 05:38:22 -0700 (PDT) Received: by mail-lj1-x233.google.com with SMTP id 38308e7fff4ca-2b9a828c920so106341671fa.1 for ; Wed, 02 Aug 2023 05:38:22 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1690979900; x=1691584700; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=p8ibCsCefa6ZAWVplZiGBVLhq2a/cqsLVlyXMZQI290=; b=L/WAhGYg89vCGvKJ01xmKEj/kAYomwjtqchmRnAljmrzypWGf1ExVNCPvP2t84Fa+H 5nhcRtEoiypv+ORz4oZa7O//4OxFXX1xNzhCgTtBF3ndTp5N4VfY59H6yXfwNvmBF4L0 oMSEts9C/Ju6pwtv9v/tZXD9XCCBhS0Gv2KVlcdai7CllO6imkWoZA/Y4ooniHZkF4VX HmkILrPsPmVPSoBpgDFNqEXzZwYKyGURbINqnijylTODT57GlOv8VinWfMeQuC8ixDnh uRFr7ESBxePYuwdQN+k+RTwxiKDVZnXdlSKkvbft5LX1teVY5mkkdE2EuXo/i5I+vT6O YkfA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1690979900; x=1691584700; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=p8ibCsCefa6ZAWVplZiGBVLhq2a/cqsLVlyXMZQI290=; b=bR9GJSmmNJ6LbyDmQPpr7gQwJHUKqMCDz8p/t7cc/Vy8/aAilSd9hSiwtkvmvmS6UW o6wSnmexeTtskhZwF0AoKE8koMKTVG+oDNaYv4KsHkfIj8UcBLvP9eJKSq/DtORNk0Ec O9agHLUJ42Wmhh7Rd+TQ+E71ZHUlyGyG7TxUWJah/6M/mt0x6rAkIdmkb9YDH71vyMH0 2gYfkqUSlh9ZOJpYEphABYR6hCH6eDd8vEMmil4hKL0e5NyRco7nSd6jKVPNqp1ZscT/ 9qyJEnxe+kM1+h3vPeqU3uc5TeX7C71Mw5LAQH7imdi4QgsqIR2lHsiNttBbJMvW6Wnt 6iAA== X-Gm-Message-State: ABy/qLZMGtM49h04deCjtMuXoMnppdkQqdz8Vbjobjag5X05Bba1+ZpI y67KwcI2SI1gcobd8Ul1n9tzrg== X-Received: by 2002:a2e:3307:0:b0:2b6:ba54:cc8 with SMTP id d7-20020a2e3307000000b002b6ba540cc8mr4884185ljc.30.1690979900741; Wed, 02 Aug 2023 05:38:20 -0700 (PDT) Received: from [192.168.1.101] (abyk53.neoplus.adsl.tpnet.pl. [83.9.30.53]) by smtp.gmail.com with ESMTPSA id h8-20020a2e9ec8000000b002b9e5fe86dasm1897050ljk.81.2023.08.02.05.38.18 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 02 Aug 2023 05:38:20 -0700 (PDT) From: Konrad Dybcio Date: Wed, 02 Aug 2023 14:37:43 +0200 Subject: [PATCH v13 03/10] dt-bindings: opp: v2-qcom-level: Document CPR3 open/closed loop volt adjustment MIME-Version: 1.0 Message-Id: <20230217-topic-cpr3h-v13-3-d01cff1c54cf@linaro.org> References: <20230217-topic-cpr3h-v13-0-d01cff1c54cf@linaro.org> In-Reply-To: <20230217-topic-cpr3h-v13-0-d01cff1c54cf@linaro.org> To: AngeloGioacchino Del Regno , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Viresh Kumar , Nishanth Menon , Stephen Boyd , Niklas Cassel , Liam Girdwood , Mark Brown , Conor Dooley , "Rafael J. Wysocki" , Viresh Kumar , Ulf Hansson Cc: Robert Marko , linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-pm@vger.kernel.org, Jeffrey Hugo , Marijn Suijten , Konrad Dybcio X-Mailer: b4 0.12.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1690979891; l=1556; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=1PU66HaoulFU/Wo7HNKJEIXnou7x9T43KX25qUVEdMs=; b=l6lqMVeLONCbszDhY3T5E0D1mbsBcY/OrtcjDOXJH7657zxZ58AWWw/XkxmTXe9bkCyinjJlt BS3oS28U+1OAnL6wInr9zNUYwqUYsKemAIvGlsroPFO+qkgLuMT7VlN X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED, SPF_HELO_NONE,SPF_PASS,T_SCC_BODY_TEXT_LINE,URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-getmail-retrieved-from-mailbox: INBOX X-GMAIL-THRID: 1773124874017919314 X-GMAIL-MSGID: 1773124874017919314 CPR3 and newer can be fed per-OPP voltage adjustment values for both open- and closed-loop paths to make better decisions about settling on the final voltage offset target. Document these properties. Reviewed-by: AngeloGioacchino Del Regno Tested-by: Jeffrey Hugo Signed-off-by: Konrad Dybcio Reviewed-by: Krzysztof Kozlowski --- .../devicetree/bindings/opp/opp-v2-qcom-level.yaml | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml index a30ef93213c0..b203ea01b17a 100644 --- a/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml +++ b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml @@ -34,6 +34,20 @@ patternProperties: minItems: 1 maxItems: 2 + qcom,opp-cloop-vadj: + description: | + An array of per-thread values representing the closed-loop + voltage adjustment value associated with this OPP node. + $ref: /schemas/types.yaml#/definitions/int32-array + maxItems: 2 + + qcom,opp-oloop-vadj: + description: | + An array of per-thread values representing the open-loop + voltage adjustment value associated with this OPP node. + $ref: /schemas/types.yaml#/definitions/int32-array + maxItems: 2 + required: - opp-level - qcom,opp-fuse-level From patchwork Wed Aug 2 12:37:44 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 129868 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a59:9f41:0:b0:3e4:2afc:c1 with SMTP id v1csp499543vqx; Wed, 2 Aug 2023 07:31:06 -0700 (PDT) X-Google-Smtp-Source: APBJJlGT6G95VsbjHlfo8lYG7S1MDjLW8fyTQVfm9Ga/GaSk0SbaxPFgU0wI3hZ33zYLnadgk1vD X-Received: by 2002:a05:6512:3244:b0:4f3:d682:7b1c with SMTP id c4-20020a056512324400b004f3d6827b1cmr4429119lfr.45.1690986666423; Wed, 02 Aug 2023 07:31:06 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1690986666; cv=none; d=google.com; s=arc-20160816; b=SOD1wmKmOpBGNKl3pEJ33RQrto3WIOcaNuEfvlIxMvOTnUpOlsuYxzb+PC1DCXyFYh LSG7UkqKkqTwupdAZWf92tqs7j2ciNsRv7Gr6Suj1ol0Ngm39skyACgBrwcVAkEdqIQt H+RuzDuJPJL+v6Sg9AE3liNnUv2HgKAjfB6xfnxUMBFWi1ASvBzqeae61San6msD0QzE /mhC48/o5d1UcOcx71qHCeqYRTG9nlftpSftrUqwa5F5ryh+bFLy3om3in6aP7EwQ4Bb tyW5u72GKLcu3/j35qin207tLBU+YxoRuHnsigA7PVNi7L7mXOcS4tiHTLnl7bw12Lbx X1kQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:cc:to:in-reply-to:references:message-id :content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=J0k/pmOWggE7rHb1KKVeAkxMrbAdPhTb3/4uDSb6oAQ=; fh=00i92FozdW145dv//HsHG4vo6csyYOdIKUCuPIVTXBE=; b=juMiPRMTKrDG5sOY5fKmhla9ycqoODVM3ApjSAz/QXt/+y5CLQ1Wx+Qq9BjvHJJzjH Fgt+TVPGSWuJXnU3fpyLwbjLCi0vaFcwxHOF10nn6ikZ7CgUD6dQlpK0UguApBX+V6ns fNoXWOfo/aWlzNHruo3PSSoH/bXyu5toZA4t3i3oZsMcLMBFbsMk8DjVbH2uPnKO+nG8 vHQhundonQ1UJ8vvVDbJ3E1OJcUJkg0UOkzKhSb0I2KW98qt+EIQAXsIjqNzUe1Et1Ww OzV+UMGfNHBbCS6wZ5BHbxIv1vfKvnOBt5iTwAWnT0fraANiN4pxL0cnxNZzFWdksV3p WmpA== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=VVMXCqIc; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id d20-20020a05640208d400b0052258afdebbsi10500032edz.157.2023.08.02.07.30.41; Wed, 02 Aug 2023 07:31:06 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=VVMXCqIc; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234584AbjHBMim (ORCPT + 99 others); Wed, 2 Aug 2023 08:38:42 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58598 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234536AbjHBMib (ORCPT ); Wed, 2 Aug 2023 08:38:31 -0400 Received: from mail-lj1-x22f.google.com (mail-lj1-x22f.google.com [IPv6:2a00:1450:4864:20::22f]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B50F02733 for ; Wed, 2 Aug 2023 05:38:24 -0700 (PDT) Received: by mail-lj1-x22f.google.com with SMTP id 38308e7fff4ca-2b9d07a8d84so85676781fa.3 for ; Wed, 02 Aug 2023 05:38:24 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1690979902; x=1691584702; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=J0k/pmOWggE7rHb1KKVeAkxMrbAdPhTb3/4uDSb6oAQ=; b=VVMXCqIcDtviZBMpyusrrVX0Gk2RfhGKdstCzFixPZem2XyYdQpnmKHrv9VEoHyE1s RcNpJGlgBPJfL64iE5kVgtRxxePIIzwUgzh8D1nkhH0wk9wTrxj11120jLT1rHtfIxO3 6uWOgYEOWgFJzn7Wa7JjueV+m3yNYrcUw1OMjEvJEmYQtAXebZcAxB9b9Uhu9EE02bfa Iwpmo21kffwu6vxEcAtWZ/nPvWz1if+DbEqZiFmu4VsmTDtNIX7TC0DJbXkpigEXePHB vXWqAMCzlh4exr0Ukl1CfD5b2/I+HX2yV+wyu2jMS7XcZftl+yKTSwzUm1P3RYZmNAVl h6kA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1690979902; x=1691584702; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=J0k/pmOWggE7rHb1KKVeAkxMrbAdPhTb3/4uDSb6oAQ=; b=hMepiy0ieOYvoKeIMrbamjiRAmh1kT1nqgtgI7HdpJYPlCA2CqWEv8xswsS4ZA+gmD N+HATXabsXVUb71F1xOXaxlw8EUl0hcSmXHTZidLlmN7umtPE8f/LNjU4r80SzgcZqYi d1Q6r3Z2bXhRrl0pcz4F6gMHD1meRSQbiCKdKZGr4cpvc1a6RE2SiG8h37UwE3Ocga69 UKOVmjyIAOz+bV1zutQoHr5bJJvTyClrikpMvRJ51XaZIaNIEpI46ZaHQhUXTyWI4cUS QcFSbVt6EhuhXbfufPWg7liYyiirWROGNbBqA0Jg8tEpH9UKmtMej1n+6LZqcmD2tzqz +fqQ== X-Gm-Message-State: ABy/qLYNrKCKJ708E9oUVgFyIQth6YucGBRsh7lYuff9cDXX9bpfFRdj ecczP75EOHNcma6Fu0hV9i95ag== X-Received: by 2002:a2e:8708:0:b0:2b6:cb0d:56ae with SMTP id m8-20020a2e8708000000b002b6cb0d56aemr3937562lji.11.1690979902725; Wed, 02 Aug 2023 05:38:22 -0700 (PDT) Received: from [192.168.1.101] (abyk53.neoplus.adsl.tpnet.pl. [83.9.30.53]) by smtp.gmail.com with ESMTPSA id h8-20020a2e9ec8000000b002b9e5fe86dasm1897050ljk.81.2023.08.02.05.38.20 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 02 Aug 2023 05:38:22 -0700 (PDT) From: Konrad Dybcio Date: Wed, 02 Aug 2023 14:37:44 +0200 Subject: [PATCH v13 04/10] dt-bindings: soc: qcom: cpr3: Add bindings for CPR3 driver MIME-Version: 1.0 Message-Id: <20230217-topic-cpr3h-v13-4-d01cff1c54cf@linaro.org> References: <20230217-topic-cpr3h-v13-0-d01cff1c54cf@linaro.org> In-Reply-To: <20230217-topic-cpr3h-v13-0-d01cff1c54cf@linaro.org> To: AngeloGioacchino Del Regno , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Viresh Kumar , Nishanth Menon , Stephen Boyd , Niklas Cassel , Liam Girdwood , Mark Brown , Conor Dooley , "Rafael J. Wysocki" , Viresh Kumar , Ulf Hansson Cc: Robert Marko , linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-pm@vger.kernel.org, Jeffrey Hugo , Marijn Suijten , Konrad Dybcio , AngeloGioacchino Del Regno X-Mailer: b4 0.12.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1690979891; l=10403; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=wdBcqGvszmkHXwmoQhrphFUNpHpKfl/pRt7Xmz8EHDY=; b=3VYnq+rToMRMSb3IGiWdZvaKmLvLxBRb5rF4QjGWFUVhgkg5ji8m/AERMIypSrSyw0V9WGdsu gN7wL5hK0GkD+Emo8m6JED8kagKAjYef2BjOdHshj+7hQZSpDNoy7Aw X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED, SPF_HELO_NONE,SPF_PASS,T_SCC_BODY_TEXT_LINE,URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-getmail-retrieved-from-mailbox: INBOX X-GMAIL-THRID: 1773128034612123020 X-GMAIL-MSGID: 1773128034612123020 From: AngeloGioacchino Del Regno Add the bindings for the CPR3 driver to the documentation. Signed-off-by: AngeloGioacchino Del Regno [Konrad: Make binding check pass; update AGdR's email] Tested-by: Jeffrey Hugo Signed-off-by: Konrad Dybcio --- .../devicetree/bindings/soc/qcom/qcom,cpr3.yaml | 291 +++++++++++++++++++++ 1 file changed, 291 insertions(+) diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml new file mode 100644 index 000000000000..d797abc5d5fe --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml @@ -0,0 +1,291 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/qcom/qcom,cpr3.yaml#" +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Core Power Reduction v3/v4/Hardened (CPR3, CPR4, CPRh) + +description: + CPR (Core Power Reduction) is a technology to reduce core power of a CPU + (or another device). Each OPP of a device corresponds to a "corner" that + has a range of valid voltages for a particular frequency. + The CPR monitors dynamic factors such as temperature, etc. and suggests + or (in the CPR-hardened case) applies voltage adjustments to save power + and meet silicon characteristic requirements for a given chip unit. + +maintainers: + - AngeloGioacchino Del Regno + +properties: + compatible: + oneOf: + - description: CPRv3 controller + items: + - const: qcom,cpr3 + - description: CPRv4 controller + items: + - const: qcom,cpr4 + - description: CPRv4-Hardened controller + items: + - enum: + - qcom,msm8998-cprh + - qcom,sdm630-cprh + - const: qcom,cprh + + reg: + items: + - description: Register space of the CPR controller0 + - description: Register space of the CPR controller1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: CPR reference clock + + vdd-supply: + description: Autonomous Phase Control (APC) or other power supply + + '#power-domain-cells': + const: 1 + + qcom,acc: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to syscon for writing ACC settings + + nvmem-cells: + description: Cells containing the fuse corners and revision data + maxItems: 32 + + nvmem-cell-names: + maxItems: 32 + + operating-points-v2: true + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - operating-points-v2 + - "#power-domain-cells" + - nvmem-cells + - nvmem-cell-names + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8998-cprh + then: + properties: + nvmem-cell-names: + items: + - const: cpr_speed_bin + - const: cpr_fuse_revision + - const: cpr0_quotient1 + - const: cpr0_quotient2 + - const: cpr0_quotient3 + - const: cpr0_quotient4 + - const: cpr0_quotient_offset2 + - const: cpr0_quotient_offset3 + - const: cpr0_quotient_offset4 + - const: cpr0_init_voltage1 + - const: cpr0_init_voltage2 + - const: cpr0_init_voltage3 + - const: cpr0_init_voltage4 + - const: cpr0_ring_osc1 + - const: cpr0_ring_osc2 + - const: cpr0_ring_osc3 + - const: cpr0_ring_osc4 + - const: cpr1_quotient1 + - const: cpr1_quotient2 + - const: cpr1_quotient3 + - const: cpr1_quotient4 + - const: cpr1_quotient_offset2 + - const: cpr1_quotient_offset3 + - const: cpr1_quotient_offset4 + - const: cpr1_init_voltage1 + - const: cpr1_init_voltage2 + - const: cpr1_init_voltage3 + - const: cpr1_init_voltage4 + - const: cpr1_ring_osc1 + - const: cpr1_ring_osc2 + - const: cpr1_ring_osc3 + - const: cpr1_ring_osc4 + +examples: + - | + #include + #include + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@0 { + compatible = "qcom,kryo280"; + device_type = "cpu"; + reg = <0x0 0x0>; + operating-points-v2 = <&cpu0_opp_table>; + power-domains = <&apc_cprh 0>; + power-domain-names = "cprh"; + }; + + cpu@100 { + compatible = "qcom,kryo280"; + device_type = "cpu"; + reg = <0x0 0x100>; + operating-points-v2 = <&cpu4_opp_table>; + power-domains = <&apc_cprh 1>; + power-domain-names = "cprh"; + }; + }; + + cpu0_opp_table: opp-table-cpu0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1843200000 { + opp-hz = /bits/ 64 <1843200000>; + required-opps = <&cprh_opp3>; + }; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + required-opps = <&cprh_opp2>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&cprh_opp1>; + }; + }; + + cpu4_opp_table: opp-table-cpu4 { + compatible = "operating-points-v2"; + opp-shared; + + opp-2208000000 { + opp-hz = /bits/ 64 <2208000000>; + required-opps = <&cprh_opp3>; + }; + + opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + required-opps = <&cprh_opp2>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&cprh_opp1>; + }; + }; + + cprh_opp_table: opp-table-cprh { + compatible = "operating-points-v2-qcom-level"; + + cprh_opp1: opp-1 { + opp-level = <1>; + qcom,opp-fuse-level = <1>; + qcom,opp-cloop-vadj = <0>; + qcom,opp-oloop-vadj = <0>; + }; + + cprh_opp2: opp-2 { + opp-level = <2>; + qcom,opp-fuse-level = <2>; + qcom,opp-cloop-vadj = <0>; + qcom,opp-oloop-vadj = <0>; + }; + + cprh_opp3: opp-3 { + opp-level = <3>; + qcom,opp-fuse-level = <2 3>; + qcom,opp-cloop-vadj = <0>; + qcom,opp-oloop-vadj = <0>; + }; + }; + + apc_cprh: power-controller@179c8000 { + compatible = "qcom,msm8998-cprh", "qcom,cprh"; + reg = <0x0179c8000 0x4000>, <0x0179c4000 0x4000>; + clocks = <&gcc GCC_HMSS_RBCPR_CLK>; + + operating-points-v2 = <&cprh_opp_table>; + #power-domain-cells = <1>; + + nvmem-cells = <&cpr_efuse_speedbin>, + <&cpr_fuse_revision>, + <&cpr_quot0_pwrcl>, + <&cpr_quot1_pwrcl>, + <&cpr_quot2_pwrcl>, + <&cpr_quot3_pwrcl>, + <&cpr_quot_offset1_pwrcl>, + <&cpr_quot_offset2_pwrcl>, + <&cpr_quot_offset3_pwrcl>, + <&cpr_init_voltage0_pwrcl>, + <&cpr_init_voltage1_pwrcl>, + <&cpr_init_voltage2_pwrcl>, + <&cpr_init_voltage3_pwrcl>, + <&cpr_ro_sel0_pwrcl>, + <&cpr_ro_sel1_pwrcl>, + <&cpr_ro_sel2_pwrcl>, + <&cpr_ro_sel3_pwrcl>, + <&cpr_quot0_perfcl>, + <&cpr_quot1_perfcl>, + <&cpr_quot2_perfcl>, + <&cpr_quot3_perfcl>, + <&cpr_quot_offset1_perfcl>, + <&cpr_quot_offset2_perfcl>, + <&cpr_quot_offset3_perfcl>, + <&cpr_init_voltage0_perfcl>, + <&cpr_init_voltage1_perfcl>, + <&cpr_init_voltage2_perfcl>, + <&cpr_init_voltage3_perfcl>, + <&cpr_ro_sel0_perfcl>, + <&cpr_ro_sel1_perfcl>, + <&cpr_ro_sel2_perfcl>, + <&cpr_ro_sel3_perfcl>; + nvmem-cell-names = "cpr_speed_bin", + "cpr_fuse_revision", + "cpr0_quotient1", + "cpr0_quotient2", + "cpr0_quotient3", + "cpr0_quotient4", + "cpr0_quotient_offset2", + "cpr0_quotient_offset3", + "cpr0_quotient_offset4", + "cpr0_init_voltage1", + "cpr0_init_voltage2", + "cpr0_init_voltage3", + "cpr0_init_voltage4", + "cpr0_ring_osc1", + "cpr0_ring_osc2", + "cpr0_ring_osc3", + "cpr0_ring_osc4", + "cpr1_quotient1", + "cpr1_quotient2", + "cpr1_quotient3", + "cpr1_quotient4", + "cpr1_quotient_offset2", + "cpr1_quotient_offset3", + "cpr1_quotient_offset4", + "cpr1_init_voltage1", + "cpr1_init_voltage2", + "cpr1_init_voltage3", + "cpr1_init_voltage4", + "cpr1_ring_osc1", + "cpr1_ring_osc2", + "cpr1_ring_osc3", + "cpr1_ring_osc4"; + }; +... From patchwork Wed Aug 2 12:37:45 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 129833 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a59:9f41:0:b0:3e4:2afc:c1 with SMTP id v1csp456724vqx; Wed, 2 Aug 2023 06:28:31 -0700 (PDT) X-Google-Smtp-Source: APBJJlHqkNUpwApSWVifKfUuNEgRMU07HWxYtZr31s0EpmQLvZyvP0j+P30HIfsCAtRCHm0QPHPp X-Received: by 2002:a17:906:2ca:b0:992:872:76d4 with SMTP id 10-20020a17090602ca00b00992087276d4mr5738606ejk.17.1690982911359; Wed, 02 Aug 2023 06:28:31 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1690982911; cv=none; d=google.com; s=arc-20160816; b=ff5D8ajvVEMIOJZHq8joVi6CxtPuVkyOSW108xPy4d4YwOPN5OwiLeGQbxyfK36VyM G1K0bEQk5anv2neo02nQ/dNGQrzyTN01b8Wntjf9Pklxy+avIRMs6NGCnp3aJoU/eBPg dBa7NG2RbBHn5MvSm4I6RUbgiQgcL82YKRZ9DTYggjRpEZMXXOSRkN4/FZVr4537fmPa TdIijP/iqIry7lz1NjRBSdAKlTZ5FDDZehq5NQx6mLM5Nhww4UPsLpyMlP9RzAOFTU67 jsl8sDFImRAET+2iIYJGM6HHESdU4pEyCuYvGjhtbQLuFtqqpjrclUs5o3jW/HwX1sX3 maRQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:cc:to:in-reply-to:references:message-id :content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=iJaVfEevrIDPUXekp6Yb+UKvDKMRxHJjbqeCwp55ZcE=; fh=00i92FozdW145dv//HsHG4vo6csyYOdIKUCuPIVTXBE=; b=C+kI12hRjR3fYDngcZrf/Jlu5X+GKfI1TecDqwoCFExPcGyZ36vFC/kbiZOutf3rRi t8BJ2l8l4hoUkOc7P9hYRMIcnjfH0PsjjNVdBePGfXZzFwL9x6XYw0zBaD24Urn/Kj4l NJuXQJshdzYZP7gUQq3Zq6JwB7OSpZQ/eB6s0u6QiPZj3Qvl1CZ+jYCa9RxNwhYeEN5a 0xMruLhxOOJyqeiJPiuCiaZ4TebOozwguy0EHH2dPanrTW421b1R5G87HMk/MSuy83HI W+ZKnhIQ3sQ7x67zGhmUbhBfNgW/Dz+hAhR6/rKen+dvWtX76viT3l1m9rPP5J0Pwpy8 +a9A== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=qBK+Tal6; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id ay21-20020a170906d29500b0099bd68129dcsi10208098ejb.760.2023.08.02.06.28.05; Wed, 02 Aug 2023 06:28:31 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=qBK+Tal6; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234608AbjHBMio (ORCPT + 99 others); Wed, 2 Aug 2023 08:38:44 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58636 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234550AbjHBMic (ORCPT ); Wed, 2 Aug 2023 08:38:32 -0400 Received: from mail-lj1-x22e.google.com (mail-lj1-x22e.google.com [IPv6:2a00:1450:4864:20::22e]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C9D942D4B for ; Wed, 2 Aug 2023 05:38:26 -0700 (PDT) Received: by mail-lj1-x22e.google.com with SMTP id 38308e7fff4ca-2b9d3dacb33so78556571fa.1 for ; Wed, 02 Aug 2023 05:38:26 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1690979905; x=1691584705; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=iJaVfEevrIDPUXekp6Yb+UKvDKMRxHJjbqeCwp55ZcE=; b=qBK+Tal65SmDq4G8Iyif3lJ4KA9KoSFR7eqPC1L9DakULXreZ6MWKNvh7b+XCA+cFG 700/OZzirGVfqOvilUonR/yuUhKf9WIsU6lgQQslmrjcCdAbBxamHdzsyS0PInmfBpUW mklgDwV9KANlyhEeRFnupxVsYZhnqub/hODH6p3rMhUxxYJnZmrQa2ENiTfCb2dBHj4m 51JTFB2pzuoNTTYl8eAptWvKm+TPs+v+Z7VeaGHR8iYMRUU9sV9AeHS1sFO7OnddIPcn 4cImRkAistH13tHsbjIvdqwYbLWDm1uSA8P6XKb3U1eWK0rocKbPTxRNNjykR1Ask2gy HVzQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1690979905; x=1691584705; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=iJaVfEevrIDPUXekp6Yb+UKvDKMRxHJjbqeCwp55ZcE=; b=bfJSCUWsz6BnSh1q0usV2KiX2ysZbNEZlyz6ld5/y9tTXOMgfzaulpaIHJfeQbR1JL E26uZbsZa9ANzqUy4RNUuTwuq6t5OVn5Obg2/BOYS2G4P5TwH3NvRaFBIQMqyyYRx+/L h0C/qSE/N4ifQNjVtGdhrYlr5tQvNpiRyu6xu3eDIIvY2YLeIApDJjd1PFCSYjM+VEBu UuatL3pZiWD4ylO6ArVuqxPdmRsdwLYqxMJEQ5ijfG9IVBnXgflUodxV3YfIMuPTMHQC VUPy3JVaRQATEGFfkKN5tXU5H74+3bSFA76zzQaAM0lQ9Uba1qReJfHkHKl6zYYXiueb ycRQ== X-Gm-Message-State: ABy/qLYQTbnixpWrALXYI7zJkLrls56NBFQcll1rpnjAHC4Et3PR0ytV tptid62RYkFflSQDbuZG51hxDQ== X-Received: by 2002:a2e:87cb:0:b0:2b1:ed29:7c47 with SMTP id v11-20020a2e87cb000000b002b1ed297c47mr4373125ljj.8.1690979904887; Wed, 02 Aug 2023 05:38:24 -0700 (PDT) Received: from [192.168.1.101] (abyk53.neoplus.adsl.tpnet.pl. [83.9.30.53]) by smtp.gmail.com with ESMTPSA id h8-20020a2e9ec8000000b002b9e5fe86dasm1897050ljk.81.2023.08.02.05.38.22 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 02 Aug 2023 05:38:24 -0700 (PDT) From: Konrad Dybcio Date: Wed, 02 Aug 2023 14:37:45 +0200 Subject: [PATCH v13 05/10] soc: qcom: cpr: Move common functions to new file MIME-Version: 1.0 Message-Id: <20230217-topic-cpr3h-v13-5-d01cff1c54cf@linaro.org> References: <20230217-topic-cpr3h-v13-0-d01cff1c54cf@linaro.org> In-Reply-To: <20230217-topic-cpr3h-v13-0-d01cff1c54cf@linaro.org> To: AngeloGioacchino Del Regno , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Viresh Kumar , Nishanth Menon , Stephen Boyd , Niklas Cassel , Liam Girdwood , Mark Brown , Conor Dooley , "Rafael J. Wysocki" , Viresh Kumar , Ulf Hansson Cc: Robert Marko , linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-pm@vger.kernel.org, Jeffrey Hugo , Marijn Suijten , Konrad Dybcio , AngeloGioacchino Del Regno X-Mailer: b4 0.12.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1690979891; l=27724; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=2m1s6Aa0Vs0vvMZMKz2Y/KPCw/GBJCGnVw+RBYU9dUs=; b=0b9Fm56VxRvOxGPb+HircgnqIXd0HPkkloWgPdxf4wVsYJ2rAA8MrU4Gl/wa9qKgjgxpdfr4a NIMHeM+bh3FCu4BsHf2+oyKFUZ2ePFSGfXIV0/VS8qUdXZhhiGfunED X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED, SPF_HELO_NONE,SPF_PASS,T_SCC_BODY_TEXT_LINE,URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-getmail-retrieved-from-mailbox: INBOX X-GMAIL-THRID: 1773124097377072306 X-GMAIL-MSGID: 1773124097377072306 From: AngeloGioacchino Del Regno In preparation for implementing a new driver that will be handling CPRv3, CPRv4 and CPR-Hardened, format out common functions to a new file. Update cpr_get_fuses in preparation for CPR3 implementation, change parameters where necessary to not take cpr.c private data structures. Signed-off-by: AngeloGioacchino Del Regno [Konrad: rebase, apply review comments, improve msg, split] Tested-by: Jeffrey Hugo Signed-off-by: Konrad Dybcio --- drivers/genpd/qcom/Makefile | 2 +- drivers/genpd/qcom/cpr-common.c | 350 ++++++++++++++++++++++++++++++++++++ drivers/genpd/qcom/cpr-common.h | 103 +++++++++++ drivers/genpd/qcom/cpr.c | 384 +++------------------------------------- 4 files changed, 475 insertions(+), 364 deletions(-) diff --git a/drivers/genpd/qcom/Makefile b/drivers/genpd/qcom/Makefile index 403dfc5af095..b28c8d9128c4 100644 --- a/drivers/genpd/qcom/Makefile +++ b/drivers/genpd/qcom/Makefile @@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_QCOM_CPR) += cpr.o +obj-$(CONFIG_QCOM_CPR) += cpr-common.o cpr.o obj-$(CONFIG_QCOM_RPMPD) += rpmpd.o obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o diff --git a/drivers/genpd/qcom/cpr-common.c b/drivers/genpd/qcom/cpr-common.c new file mode 100644 index 000000000000..ea85f6b4bef8 --- /dev/null +++ b/drivers/genpd/qcom/cpr-common.c @@ -0,0 +1,350 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Linaro Limited + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cpr-common.h" + +int cpr_populate_ring_osc_idx(struct device *dev, + struct fuse_corner *fuse_corner, + const struct cpr_fuse *cpr_fuse, + int num_fuse_corners) +{ + struct fuse_corner *end = fuse_corner + num_fuse_corners; + u32 data; + int ret; + + for (; fuse_corner < end; fuse_corner++, cpr_fuse++) { + ret = nvmem_cell_read_variable_le_u32(dev, cpr_fuse->ring_osc, &data); + if (ret) + return ret; + fuse_corner->ring_osc_idx = data; + } + + return 0; +} +EXPORT_SYMBOL_GPL(cpr_populate_ring_osc_idx); + +static int cpr_read_fuse_uV(int init_v_width, int step_size_uV, int ref_uV, + int step_volt, const char *init_v_efuse, + struct device *dev) +{ + int steps, uV; + u32 bits = 0; + int ret; + + ret = nvmem_cell_read_variable_le_u32(dev, init_v_efuse, &bits); + if (ret) + return ret; + + steps = bits & ~BIT(init_v_width - 1); + /* Not two's complement.. instead highest bit is sign bit */ + if (bits & BIT(init_v_width - 1)) + steps = -steps; + + uV = ref_uV + steps * step_size_uV; + + return DIV_ROUND_UP(uV, step_volt) * step_volt; +} + +const struct cpr_fuse *cpr_get_fuses(struct device *dev, + unsigned int num_fuse_corners) +{ + struct cpr_fuse *fuses; + int i; + + fuses = devm_kcalloc(dev, num_fuse_corners, sizeof(*fuses), GFP_KERNEL); + if (!fuses) + return ERR_PTR(-ENOMEM); + + for (i = 0; i < num_fuse_corners; i++) { + char tbuf[32]; + + snprintf(tbuf, 32, "cpr_ring_osc%d", i + 1); + fuses[i].ring_osc = devm_kstrdup(dev, tbuf, GFP_KERNEL); + if (!fuses[i].ring_osc) + return ERR_PTR(-ENOMEM); + + snprintf(tbuf, 32, "cpr_init_voltage%d", i + 1); + fuses[i].init_voltage = devm_kstrdup(dev, tbuf, GFP_KERNEL); + if (!fuses[i].init_voltage) + return ERR_PTR(-ENOMEM); + + snprintf(tbuf, 32, "cpr_quotient%d", i + 1); + fuses[i].quotient = devm_kstrdup(dev, tbuf, GFP_KERNEL); + if (!fuses[i].quotient) + return ERR_PTR(-ENOMEM); + + snprintf(tbuf, 32, "cpr_quotient_offset%d", i + 1); + fuses[i].quotient_offset = devm_kstrdup(dev, tbuf, GFP_KERNEL); + if (!fuses[i].quotient_offset) + return ERR_PTR(-ENOMEM); + } + + return fuses; +} +EXPORT_SYMBOL_GPL(cpr_get_fuses); + +int cpr_populate_fuse_common(struct device *dev, + struct fuse_corner_data *fdata, + const struct cpr_fuse *cpr_fuse, + struct fuse_corner *fuse_corner, + int step_volt, int init_v_width, + int init_v_step) +{ + int uV, ret; + + /* Populate uV */ + uV = cpr_read_fuse_uV(init_v_width, init_v_step, + fdata->ref_uV, step_volt, + cpr_fuse->init_voltage, dev); + if (uV < 0) + return uV; + + /* + * Update SoC voltages: platforms might choose a different + * regulators than the one used to characterize the algorithms + * (ie, init_voltage_step). + */ + fdata->min_uV = roundup(fdata->min_uV, step_volt); + fdata->max_uV = roundup(fdata->max_uV, step_volt); + + fuse_corner->min_uV = fdata->min_uV; + fuse_corner->max_uV = fdata->max_uV; + fuse_corner->uV = clamp(uV, fuse_corner->min_uV, fuse_corner->max_uV); + + /* Populate target quotient by scaling */ + ret = nvmem_cell_read_variable_le_u32(dev, cpr_fuse->quotient, &fuse_corner->quot); + if (ret) + return ret; + + fuse_corner->quot *= fdata->quot_scale; + fuse_corner->quot += fdata->quot_offset; + fuse_corner->quot += fdata->quot_adjust; + + return 0; +} +EXPORT_SYMBOL_GPL(cpr_populate_fuse_common); + +int cpr_find_initial_corner(struct device *dev, struct clk *cpu_clk, + struct corner *corners, int num_corners) +{ + unsigned long rate; + struct corner *iter, *corner; + const struct corner *end; + unsigned int i = 0; + + if (!cpu_clk) { + dev_err(dev, "cannot get rate from NULL clk\n"); + return -EINVAL; + } + + end = &corners[num_corners - 1]; + rate = clk_get_rate(cpu_clk); + + /* + * Some bootloaders set a CPU clock frequency that is not defined + * in the OPP table. When running at an unlisted frequency, + * cpufreq_online() will change to the OPP which has the lowest + * frequency, at or above the unlisted frequency. + * Since cpufreq_online() always "rounds up" in the case of an + * unlisted frequency, this function always "rounds down" in case + * of an unlisted frequency. That way, when cpufreq_online() + * triggers the first ever call to cpr_set_performance_state(), + * it will correctly determine the direction as UP. + */ + for (iter = corners; iter <= end; iter++) { + if (iter->freq > rate) + break; + i++; + if (iter->freq == rate) { + corner = iter; + break; + } + if (iter->freq < rate) + corner = iter; + } + + if (!corner) { + dev_err(dev, "boot up corner not found\n"); + return -EINVAL; + } + + dev_dbg(dev, "boot up perf state: %u\n", i); + + return 0; +} +EXPORT_SYMBOL_GPL(cpr_find_initial_corner); + +unsigned int cpr_get_fuse_corner(struct dev_pm_opp *opp) +{ + struct device_node *np; + unsigned int fuse_corner = 0; + + np = dev_pm_opp_get_of_node(opp); + if (of_property_read_u32(np, "qcom,opp-fuse-level", &fuse_corner)) + pr_err("%s: missing 'qcom,opp-fuse-level' property\n", + __func__); + + of_node_put(np); + + return fuse_corner; +} +EXPORT_SYMBOL_GPL(cpr_get_fuse_corner); + +unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref, + struct device *cpu_dev) +{ + u64 rate = 0; + struct device_node *ref_np; + struct device_node *desc_np; + struct device_node *child_np = NULL; + struct device_node *child_req_np = NULL; + + desc_np = dev_pm_opp_of_get_opp_desc_node(cpu_dev); + if (!desc_np) + return 0; + + ref_np = dev_pm_opp_get_of_node(ref); + if (!ref_np) + goto out_ref; + + do { + of_node_put(child_req_np); + child_np = of_get_next_available_child(desc_np, child_np); + child_req_np = of_parse_phandle(child_np, "required-opps", 0); + } while (child_np && child_req_np != ref_np); + + if (child_np && child_req_np == ref_np) + of_property_read_u64(child_np, "opp-hz", &rate); + + of_node_put(child_req_np); + of_node_put(child_np); + of_node_put(ref_np); +out_ref: + of_node_put(desc_np); + + return (unsigned long) rate; +} +EXPORT_SYMBOL_GPL(cpr_get_opp_hz_for_req); + +int cpr_calculate_scaling(struct device *dev, + const char *quot_offset, + const struct fuse_corner_data *fdata, + const struct corner *corner) +{ + u32 quot_diff = 0; + unsigned long freq_diff; + int scaling; + const struct fuse_corner *fuse, *prev_fuse; + int ret; + + fuse = corner->fuse_corner; + prev_fuse = fuse - 1; + + if (quot_offset) { + ret = nvmem_cell_read_variable_le_u32(dev, quot_offset, "_diff); + if (ret) + return ret; + + quot_diff *= fdata->quot_offset_scale; + quot_diff += fdata->quot_offset_adjust; + } else { + quot_diff = fuse->quot - prev_fuse->quot; + } + + freq_diff = fuse->max_freq - prev_fuse->max_freq; + freq_diff /= 1000000; /* Convert to MHz */ + scaling = 1000 * quot_diff / freq_diff; + return min(scaling, fdata->max_quot_scale); +} +EXPORT_SYMBOL_GPL(cpr_calculate_scaling); + +int cpr_interpolate(const struct corner *corner, int step_volt, + const struct fuse_corner_data *fdata) +{ + unsigned long f_high, f_low, f_diff; + int uV_high, uV_low, uV; + u64 temp, temp_limit; + const struct fuse_corner *fuse, *prev_fuse; + + fuse = corner->fuse_corner; + prev_fuse = fuse - 1; + + f_high = fuse->max_freq; + f_low = prev_fuse->max_freq; + uV_high = fuse->uV; + uV_low = prev_fuse->uV; + f_diff = fuse->max_freq - corner->freq; + + /* + * Don't interpolate in the wrong direction. This could happen + * if the adjusted fuse voltage overlaps with the previous fuse's + * adjusted voltage. + */ + if (f_high <= f_low || uV_high <= uV_low || f_high <= corner->freq) + return corner->uV; + + temp = f_diff * (uV_high - uV_low); + temp = div64_ul(temp, f_high - f_low); + + /* + * max_volt_scale has units of uV/MHz while freq values + * have units of Hz. Divide by 1000000 to convert to. + */ + temp_limit = f_diff * fdata->max_volt_scale; + do_div(temp_limit, 1000000); + + uV = uV_high - min(temp, temp_limit); + return roundup(uV, step_volt); +} +EXPORT_SYMBOL_GPL(cpr_interpolate); + +int cpr_check_vreg_constraints(struct device *dev, struct regulator *vreg, + struct fuse_corner *f) +{ + int ret; + + ret = regulator_is_supported_voltage(vreg, f->min_uV, f->min_uV); + if (!ret) { + dev_err(dev, "min uV: %d not supported by regulator\n", + f->min_uV); + return -EINVAL; + } + + ret = regulator_is_supported_voltage(vreg, f->max_uV, f->max_uV); + if (!ret) { + dev_err(dev, "max uV: %d not supported by regulator\n", + f->max_uV); + return -EINVAL; + } + + return 0; +} +EXPORT_SYMBOL_GPL(cpr_check_vreg_constraints); + +MODULE_DESCRIPTION("Core Power Reduction (CPR) common"); +MODULE_LICENSE("GPL"); diff --git a/drivers/genpd/qcom/cpr-common.h b/drivers/genpd/qcom/cpr-common.h new file mode 100644 index 000000000000..1f2ebf9394cf --- /dev/null +++ b/drivers/genpd/qcom/cpr-common.h @@ -0,0 +1,103 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#include +#include +#include +#include + +enum voltage_change_dir { + NO_CHANGE, + DOWN, + UP, +}; + +struct cpr_fuse { + char *ring_osc; + char *init_voltage; + char *quotient; + char *quotient_offset; +}; + +struct fuse_corner_data { + int ref_uV; + int max_uV; + int min_uV; + int max_volt_scale; + int max_quot_scale; + /* fuse quot */ + int quot_offset; + int quot_scale; + int quot_adjust; + /* fuse quot_offset */ + int quot_offset_scale; + int quot_offset_adjust; +}; + +struct fuse_corner { + int min_uV; + int max_uV; + int uV; + int quot; + int step_quot; + const struct reg_sequence *accs; + int num_accs; + unsigned long max_freq; + u8 ring_osc_idx; +}; + +struct corner { + int min_uV; + int max_uV; + int uV; + int last_uV; + int quot_adjust; + u32 save_ctl; + u32 save_irq; + unsigned long freq; + struct fuse_corner *fuse_corner; +}; + +struct corner_data { + unsigned int fuse_corner; + unsigned long freq; +}; + +struct acc_desc { + unsigned int enable_reg; + u32 enable_mask; + + struct reg_sequence *config; + struct reg_sequence *settings; + int num_regs_per_fuse; +}; + +struct cpr_acc_desc { + const struct cpr_desc *cpr_desc; + const struct acc_desc *acc_desc; +}; + +int cpr_populate_ring_osc_idx(struct device *dev, + struct fuse_corner *fuse_corner, + const struct cpr_fuse *cpr_fuse, + int num_fuse_corners); +const struct cpr_fuse *cpr_get_fuses(struct device *dev, + unsigned int num_fuse_corners); +int cpr_populate_fuse_common(struct device *dev, + struct fuse_corner_data *fdata, + const struct cpr_fuse *cpr_fuse, + struct fuse_corner *fuse_corner, + int step_volt, int init_v_width, + int init_v_step); +int cpr_find_initial_corner(struct device *dev, struct clk *cpu_clk, + struct corner *corners, int num_corners); +u32 cpr_get_fuse_corner(struct dev_pm_opp *opp); +unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref, + struct device *cpu_dev); +int cpr_calculate_scaling(struct device *dev, + const char *quot_offset, + const struct fuse_corner_data *fdata, + const struct corner *corner); +int cpr_interpolate(const struct corner *corner, int step_volt, + const struct fuse_corner_data *fdata); +int cpr_check_vreg_constraints(struct device *dev, struct regulator *vreg, + struct fuse_corner *f); diff --git a/drivers/genpd/qcom/cpr.c b/drivers/genpd/qcom/cpr.c index 94a3f0977212..2cfeefebd24c 100644 --- a/drivers/genpd/qcom/cpr.c +++ b/drivers/genpd/qcom/cpr.c @@ -25,6 +25,8 @@ #include #include +#include "cpr-common.h" + /* Register Offsets for RB-CPR and Bit Definitions */ /* RBCPR Version Register */ @@ -123,45 +125,12 @@ #define FUSE_REVISION_UNKNOWN (-1) -enum voltage_change_dir { - NO_CHANGE, - DOWN, - UP, -}; - -struct cpr_fuse { - char *ring_osc; - char *init_voltage; - char *quotient; - char *quotient_offset; -}; - -struct fuse_corner_data { - int ref_uV; - int max_uV; - int min_uV; - int max_volt_scale; - int max_quot_scale; - /* fuse quot */ - int quot_offset; - int quot_scale; - int quot_adjust; - /* fuse quot_offset */ - int quot_offset_scale; - int quot_offset_adjust; -}; - struct cpr_fuses { int init_voltage_step; int init_voltage_width; struct fuse_corner_data *fuse_corner_data; }; -struct corner_data { - unsigned int fuse_corner; - unsigned long freq; -}; - struct cpr_desc { unsigned int num_fuse_corners; int min_diff_quot; @@ -183,44 +152,6 @@ struct cpr_desc { bool reduce_to_corner_uV; }; -struct acc_desc { - unsigned int enable_reg; - u32 enable_mask; - - struct reg_sequence *config; - struct reg_sequence *settings; - int num_regs_per_fuse; -}; - -struct cpr_acc_desc { - const struct cpr_desc *cpr_desc; - const struct acc_desc *acc_desc; -}; - -struct fuse_corner { - int min_uV; - int max_uV; - int uV; - int quot; - int step_quot; - const struct reg_sequence *accs; - int num_accs; - unsigned long max_freq; - u8 ring_osc_idx; -}; - -struct corner { - int min_uV; - int max_uV; - int uV; - int last_uV; - int quot_adjust; - u32 save_ctl; - u32 save_irq; - unsigned long freq; - struct fuse_corner *fuse_corner; -}; - struct cpr_drv { unsigned int num_corners; unsigned int ref_clk_khz; @@ -800,50 +731,6 @@ static int cpr_set_performance_state(struct generic_pm_domain *domain, return ret; } -static int -cpr_populate_ring_osc_idx(struct cpr_drv *drv) -{ - struct fuse_corner *fuse = drv->fuse_corners; - struct fuse_corner *end = fuse + drv->desc->num_fuse_corners; - const struct cpr_fuse *fuses = drv->cpr_fuses; - u32 data; - int ret; - - for (; fuse < end; fuse++, fuses++) { - ret = nvmem_cell_read_variable_le_u32(drv->dev, fuses->ring_osc, &data); - if (ret) - return ret; - fuse->ring_osc_idx = data; - } - - return 0; -} - -static int cpr_read_fuse_uV(const struct cpr_desc *desc, - const struct fuse_corner_data *fdata, - const char *init_v_efuse, - int step_volt, - struct cpr_drv *drv) -{ - int step_size_uV, steps, uV; - u32 bits = 0; - int ret; - - ret = nvmem_cell_read_variable_le_u32(drv->dev, init_v_efuse, &bits); - if (ret) - return ret; - - steps = bits & ~BIT(desc->cpr_fuses.init_voltage_width - 1); - /* Not two's complement.. instead highest bit is sign bit */ - if (bits & BIT(desc->cpr_fuses.init_voltage_width - 1)) - steps = -steps; - - step_size_uV = desc->cpr_fuses.init_voltage_step; - - uV = fdata->ref_uV + steps * step_size_uV; - return DIV_ROUND_UP(uV, step_volt) * step_volt; -} - static int cpr_fuse_corner_init(struct cpr_drv *drv) { const struct cpr_desc *desc = drv->desc; @@ -853,7 +740,6 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv) unsigned int step_volt; struct fuse_corner_data *fdata; struct fuse_corner *fuse, *end; - int uV; const struct reg_sequence *accs; int ret; @@ -869,23 +755,15 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv) fdata = desc->cpr_fuses.fuse_corner_data; for (i = 0; fuse <= end; fuse++, fuses++, i++, fdata++) { - /* - * Update SoC voltages: platforms might choose a different - * regulators than the one used to characterize the algorithms - * (ie, init_voltage_step). - */ - fdata->min_uV = roundup(fdata->min_uV, step_volt); - fdata->max_uV = roundup(fdata->max_uV, step_volt); + ret = cpr_populate_fuse_common(drv->dev, fdata, fuses, + fuse, step_volt, + desc->cpr_fuses.init_voltage_width, + desc->cpr_fuses.init_voltage_step); + if (ret) + return ret; - /* Populate uV */ - uV = cpr_read_fuse_uV(desc, fdata, fuses->init_voltage, - step_volt, drv); - if (uV < 0) - return uV; - fuse->min_uV = fdata->min_uV; - fuse->max_uV = fdata->max_uV; - fuse->uV = clamp(uV, fuse->min_uV, fuse->max_uV); + fuse->step_quot = desc->step_quot[fuse->ring_osc_idx]; if (fuse == end) { /* @@ -923,25 +801,9 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv) else if (fuse->uV < fuse->min_uV) fuse->uV = fuse->min_uV; - ret = regulator_is_supported_voltage(drv->vdd_apc, - fuse->min_uV, - fuse->min_uV); - if (!ret) { - dev_err(drv->dev, - "min uV: %d (fuse corner: %d) not supported by regulator\n", - fuse->min_uV, i); - return -EINVAL; - } - - ret = regulator_is_supported_voltage(drv->vdd_apc, - fuse->max_uV, - fuse->max_uV); - if (!ret) { - dev_err(drv->dev, - "max uV: %d (fuse corner: %d) not supported by regulator\n", - fuse->max_uV, i); - return -EINVAL; - } + ret = cpr_check_vreg_constraints(drv->dev, drv->vdd_apc, fuse); + if (ret) + return ret; dev_dbg(drv->dev, "fuse corner %d: [%d %d %d] RO%hhu quot %d squot %d\n", @@ -952,126 +814,6 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv) return 0; } -static int cpr_calculate_scaling(const char *quot_offset, - struct cpr_drv *drv, - const struct fuse_corner_data *fdata, - const struct corner *corner) -{ - u32 quot_diff = 0; - unsigned long freq_diff; - int scaling; - const struct fuse_corner *fuse, *prev_fuse; - int ret; - - fuse = corner->fuse_corner; - prev_fuse = fuse - 1; - - if (quot_offset) { - ret = nvmem_cell_read_variable_le_u32(drv->dev, quot_offset, "_diff); - if (ret) - return ret; - - quot_diff *= fdata->quot_offset_scale; - quot_diff += fdata->quot_offset_adjust; - } else { - quot_diff = fuse->quot - prev_fuse->quot; - } - - freq_diff = fuse->max_freq - prev_fuse->max_freq; - freq_diff /= 1000000; /* Convert to MHz */ - scaling = 1000 * quot_diff / freq_diff; - return min(scaling, fdata->max_quot_scale); -} - -static int cpr_interpolate(const struct corner *corner, int step_volt, - const struct fuse_corner_data *fdata) -{ - unsigned long f_high, f_low, f_diff; - int uV_high, uV_low, uV; - u64 temp, temp_limit; - const struct fuse_corner *fuse, *prev_fuse; - - fuse = corner->fuse_corner; - prev_fuse = fuse - 1; - - f_high = fuse->max_freq; - f_low = prev_fuse->max_freq; - uV_high = fuse->uV; - uV_low = prev_fuse->uV; - f_diff = fuse->max_freq - corner->freq; - - /* - * Don't interpolate in the wrong direction. This could happen - * if the adjusted fuse voltage overlaps with the previous fuse's - * adjusted voltage. - */ - if (f_high <= f_low || uV_high <= uV_low || f_high <= corner->freq) - return corner->uV; - - temp = f_diff * (uV_high - uV_low); - temp = div64_ul(temp, f_high - f_low); - - /* - * max_volt_scale has units of uV/MHz while freq values - * have units of Hz. Divide by 1000000 to convert to. - */ - temp_limit = f_diff * fdata->max_volt_scale; - do_div(temp_limit, 1000000); - - uV = uV_high - min(temp, temp_limit); - return roundup(uV, step_volt); -} - -static unsigned int cpr_get_fuse_corner(struct dev_pm_opp *opp) -{ - struct device_node *np; - unsigned int fuse_corner = 0; - - np = dev_pm_opp_get_of_node(opp); - if (of_property_read_u32(np, "qcom,opp-fuse-level", &fuse_corner)) - pr_err("%s: missing 'qcom,opp-fuse-level' property\n", - __func__); - - of_node_put(np); - - return fuse_corner; -} - -static unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref, - struct device *cpu_dev) -{ - u64 rate = 0; - struct device_node *ref_np; - struct device_node *desc_np; - struct device_node *child_np = NULL; - struct device_node *child_req_np = NULL; - - desc_np = dev_pm_opp_of_get_opp_desc_node(cpu_dev); - if (!desc_np) - return 0; - - ref_np = dev_pm_opp_get_of_node(ref); - if (!ref_np) - goto out_ref; - - do { - of_node_put(child_req_np); - child_np = of_get_next_available_child(desc_np, child_np); - child_req_np = of_parse_phandle(child_np, "required-opps", 0); - } while (child_np && child_req_np != ref_np); - - if (child_np && child_req_np == ref_np) - of_property_read_u64(child_np, "opp-hz", &rate); - - of_node_put(child_req_np); - of_node_put(child_np); - of_node_put(ref_np); -out_ref: - of_node_put(desc_np); - - return (unsigned long) rate; -} - static int cpr_corner_init(struct cpr_drv *drv) { const struct cpr_desc *desc = drv->desc; @@ -1185,7 +927,7 @@ static int cpr_corner_init(struct cpr_drv *drv) corner->uV = fuse->uV; if (prev_fuse && cdata[i - 1].freq == prev_fuse->max_freq) { - scaling = cpr_calculate_scaling(quot_offset, drv, + scaling = cpr_calculate_scaling(drv->dev, quot_offset, fdata, corner); if (scaling < 0) return scaling; @@ -1223,47 +965,6 @@ static int cpr_corner_init(struct cpr_drv *drv) return 0; } -static const struct cpr_fuse *cpr_get_fuses(struct cpr_drv *drv) -{ - const struct cpr_desc *desc = drv->desc; - struct cpr_fuse *fuses; - int i; - - fuses = devm_kcalloc(drv->dev, desc->num_fuse_corners, - sizeof(struct cpr_fuse), - GFP_KERNEL); - if (!fuses) - return ERR_PTR(-ENOMEM); - - for (i = 0; i < desc->num_fuse_corners; i++) { - char tbuf[32]; - - snprintf(tbuf, 32, "cpr_ring_osc%d", i + 1); - fuses[i].ring_osc = devm_kstrdup(drv->dev, tbuf, GFP_KERNEL); - if (!fuses[i].ring_osc) - return ERR_PTR(-ENOMEM); - - snprintf(tbuf, 32, "cpr_init_voltage%d", i + 1); - fuses[i].init_voltage = devm_kstrdup(drv->dev, tbuf, - GFP_KERNEL); - if (!fuses[i].init_voltage) - return ERR_PTR(-ENOMEM); - - snprintf(tbuf, 32, "cpr_quotient%d", i + 1); - fuses[i].quotient = devm_kstrdup(drv->dev, tbuf, GFP_KERNEL); - if (!fuses[i].quotient) - return ERR_PTR(-ENOMEM); - - snprintf(tbuf, 32, "cpr_quotient_offset%d", i + 1); - fuses[i].quotient_offset = devm_kstrdup(drv->dev, tbuf, - GFP_KERNEL); - if (!fuses[i].quotient_offset) - return ERR_PTR(-ENOMEM); - } - - return fuses; -} - static void cpr_set_loop_allowed(struct cpr_drv *drv) { drv->loop_disabled = false; @@ -1295,54 +996,6 @@ static int cpr_init_parameters(struct cpr_drv *drv) return 0; } -static int cpr_find_initial_corner(struct cpr_drv *drv) -{ - unsigned long rate; - const struct corner *end; - struct corner *iter; - unsigned int i = 0; - - if (!drv->cpu_clk) { - dev_err(drv->dev, "cannot get rate from NULL clk\n"); - return -EINVAL; - } - - end = &drv->corners[drv->num_corners - 1]; - rate = clk_get_rate(drv->cpu_clk); - - /* - * Some bootloaders set a CPU clock frequency that is not defined - * in the OPP table. When running at an unlisted frequency, - * cpufreq_online() will change to the OPP which has the lowest - * frequency, at or above the unlisted frequency. - * Since cpufreq_online() always "rounds up" in the case of an - * unlisted frequency, this function always "rounds down" in case - * of an unlisted frequency. That way, when cpufreq_online() - * triggers the first ever call to cpr_set_performance_state(), - * it will correctly determine the direction as UP. - */ - for (iter = drv->corners; iter <= end; iter++) { - if (iter->freq > rate) - break; - i++; - if (iter->freq == rate) { - drv->corner = iter; - break; - } - if (iter->freq < rate) - drv->corner = iter; - } - - if (!drv->corner) { - dev_err(drv->dev, "boot up corner not found\n"); - return -EINVAL; - } - - dev_dbg(drv->dev, "boot up perf state: %u\n", i); - - return 0; -} - static const struct cpr_desc qcs404_cpr_desc = { .num_fuse_corners = 3, .min_diff_quot = CPR_FUSE_MIN_QUOT_DIFF, @@ -1530,7 +1183,8 @@ static int cpr_pd_attach_dev(struct generic_pm_domain *domain, if (ret) goto unlock; - ret = cpr_find_initial_corner(drv); + ret = cpr_find_initial_corner(drv->dev, drv->cpu_clk, drv->corners, + drv->num_corners); if (ret) goto unlock; @@ -1615,6 +1269,7 @@ static int cpr_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct cpr_drv *drv; + const struct cpr_desc *desc; int irq, ret; const struct cpr_acc_desc *data; struct device_node *np; @@ -1630,6 +1285,7 @@ static int cpr_probe(struct platform_device *pdev) drv->dev = dev; drv->desc = data->cpr_desc; drv->acc_desc = data->acc_desc; + desc = drv->desc; drv->fuse_corners = devm_kcalloc(dev, drv->desc->num_fuse_corners, sizeof(*drv->fuse_corners), @@ -1669,11 +1325,13 @@ static int cpr_probe(struct platform_device *pdev) if (ret) return ret; - drv->cpr_fuses = cpr_get_fuses(drv); + drv->cpr_fuses = cpr_get_fuses(drv->dev, desc->num_fuse_corners); if (IS_ERR(drv->cpr_fuses)) return PTR_ERR(drv->cpr_fuses); - ret = cpr_populate_ring_osc_idx(drv); + ret = cpr_populate_ring_osc_idx(drv->dev, drv->fuse_corners, + drv->cpr_fuses, + desc->num_fuse_corners); if (ret) return ret; From patchwork Wed Aug 2 12:37:46 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 129866 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a59:9f41:0:b0:3e4:2afc:c1 with SMTP id v1csp491868vqx; Wed, 2 Aug 2023 07:19:26 -0700 (PDT) X-Google-Smtp-Source: APBJJlF+Y7iSZ1AivJz042Dz6cvVfwECfB8Tay0kuMka8TxqCYpmqQSMwipwxBq+di0F8tzLVp5M X-Received: by 2002:a05:6a20:7289:b0:13e:da98:966a with SMTP id o9-20020a056a20728900b0013eda98966amr2934027pzk.5.1690985966248; Wed, 02 Aug 2023 07:19:26 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1690985966; cv=none; d=google.com; s=arc-20160816; b=l24gGF8/UtL5CuzCo0UtIfVQKhkIO7xsFet9Zl5A7dwCFBUr7QTLZopu1ft54zadbJ kgaTULF1MNmnm6JCLKuH5uHSsECG0hW3HGQ+JlZACR1X0kZ5LCdOUqWgedcEJ/uKoUXr +R+nLFmOc76dOh+cqK9UW204IdEqLp+K8iFhz6v1jtjbGU3z3pYYaOKdGAry7wWUT3Jx 2UxwvXt4eYS8x4gaTV7qkX41ptpdesGEYaoJY01ExWr1CZWtrHvkdkaWYib8sHh3lB08 a0aUOtMHhVYLI6i18N520EzMdVjXQkUXVN/PAfTMjZGedCmqfW2NBJkl7Hnjs2hYks5c mFcQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:cc:to:in-reply-to:references:message-id :content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=7foxAvTJNjxpzEzinqawhuOf8tl6MaxX0nC0Wnx2ikg=; fh=00i92FozdW145dv//HsHG4vo6csyYOdIKUCuPIVTXBE=; b=s0gESiZp+k9IRXLZI3OBlPhMJ95Qe/3yK1YD9Yaoj6N5hbAHVi82q6BdJ24C4WwDFI Bid+WT5l7pUlDacC+VaUQH1PwR/YNwIHpwdRN5pCHuFegx9LbDS0dorD9SyrVRNus+n5 dObVlUqFQO1DYNJis6b6nnowg25KYsRcUXZTJpe3+isfhtI4s5cr6sO4v+AxiENmT1Ne U0CfVbpJwvQMq1rn8AxANmF36yn7IimGG6llBpCYrFx8C5jpidwk2psP6sdc8NYwSWKH bNEPi3Tev7TQo8OT9K36z6LiFau8VznnvFUi4enufelS0rUSen69JYq9RGL9TpsZDIlX 6kww== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=DyBfrGhB; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id be3-20020a656e43000000b00541710a9d44si6286942pgb.114.2023.08.02.07.19.09; Wed, 02 Aug 2023 07:19:26 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=DyBfrGhB; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234640AbjHBMi4 (ORCPT + 99 others); Wed, 2 Aug 2023 08:38:56 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58632 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234547AbjHBMig (ORCPT ); Wed, 2 Aug 2023 08:38:36 -0400 Received: from mail-lj1-x229.google.com (mail-lj1-x229.google.com [IPv6:2a00:1450:4864:20::229]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id E24D52D68 for ; Wed, 2 Aug 2023 05:38:28 -0700 (PDT) Received: by mail-lj1-x229.google.com with SMTP id 38308e7fff4ca-2b9bf52cd08so106514071fa.2 for ; Wed, 02 Aug 2023 05:38:28 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1690979907; x=1691584707; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=7foxAvTJNjxpzEzinqawhuOf8tl6MaxX0nC0Wnx2ikg=; b=DyBfrGhBAsiIZdO7TJN93/vtpKO4LaRGlAv16qGMa8VqcN3ltSc8bnr+G59OPKexX1 LG9E0K1FaTpy/ie/7lHW0c2LyYFY+UMWN+ToyyOPVYQRaf9IY9r5iRG7fuv2GU0SfVcN KTp1uKmROwLb7tGNcGuy7WPxUDAT1Y7Ml2m4lHA8CegJopXAgMhthh6UF7RI21w3/9m8 3i0vH82+pmDlFto4t+U8+fPBGNyCvLVVrML3Di1c3YX34qRR84jeKLsM9VbzWxviCIZ7 61YMDE1EJtgmF5mwSNLi0se/erX7XWGcwdMnPxVRqYx4PZWDZSOUlD/mxM9k9dZFIAqU 4LlA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1690979907; x=1691584707; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=7foxAvTJNjxpzEzinqawhuOf8tl6MaxX0nC0Wnx2ikg=; b=NKDQkFWLyFNPXVfIy/k6DPbWtVy/ThI4Iv6p1Nw5uqveAf/yT+ntp9uUHWHjTYWCkF 1LrZYj7qQ27DB9TpPtyk9xMZmlJgCjK/1MDvhCbuXepJguOZRnYrkrpG4oKA+MqMlr0P 8g25MhRFSn9KtRkjaepGWX5N9tbM5wTVfnmfdrfeI1DMQgQGnJu9dXrNXivjc+u1yBZm opdQ7nMwmu9yJEVM0YvMJG+iltC62Vj04o2WItceBlmm6uq+PKJeWAw9G+h5nBR0WQtO OHKZG26jRcVPZ5a/Tke/cTAJ0FRZvsH+BNjbFqc7oo3otlgcXPkYw4P+MySofiZNHgJP rWIw== X-Gm-Message-State: ABy/qLaHZ++aL6uzIU2eLhS0LphUTjtF948y/GFu6IGFBhWc1l0BMtcH GRA+4IDCTWn8DBXFQjC5ov508w== X-Received: by 2002:a2e:9903:0:b0:2b9:b904:74d7 with SMTP id v3-20020a2e9903000000b002b9b90474d7mr5078871lji.18.1690979906812; Wed, 02 Aug 2023 05:38:26 -0700 (PDT) Received: from [192.168.1.101] (abyk53.neoplus.adsl.tpnet.pl. [83.9.30.53]) by smtp.gmail.com with ESMTPSA id h8-20020a2e9ec8000000b002b9e5fe86dasm1897050ljk.81.2023.08.02.05.38.25 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 02 Aug 2023 05:38:26 -0700 (PDT) From: Konrad Dybcio Date: Wed, 02 Aug 2023 14:37:46 +0200 Subject: [PATCH v13 06/10] soc: qcom: cpr-common: Add support for flat fuse adjustment MIME-Version: 1.0 Message-Id: <20230217-topic-cpr3h-v13-6-d01cff1c54cf@linaro.org> References: <20230217-topic-cpr3h-v13-0-d01cff1c54cf@linaro.org> In-Reply-To: <20230217-topic-cpr3h-v13-0-d01cff1c54cf@linaro.org> To: AngeloGioacchino Del Regno , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Viresh Kumar , Nishanth Menon , Stephen Boyd , Niklas Cassel , Liam Girdwood , Mark Brown , Conor Dooley , "Rafael J. Wysocki" , Viresh Kumar , Ulf Hansson Cc: Robert Marko , linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-pm@vger.kernel.org, Jeffrey Hugo , Marijn Suijten , Konrad Dybcio , AngeloGioacchino Del Regno X-Mailer: b4 0.12.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1690979891; l=2102; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=/XcIm6aoB0M2m9RzHO8vr3y3r5RlnUHq0kq7ECIZUN0=; b=05407jLR9+kDlBp3QnNsjeFHTBJWo5qa2ankRUPVRlSZhnrlXf9N5TAkr4Odf0Kj/Xo6UWflS seOIpoabXUHDDUVJx8f/HxRMvUwP62kU1wqBCfbDbjUD10GtKJCha77 X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED, SPF_HELO_NONE,SPF_PASS,T_SCC_BODY_TEXT_LINE,URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-getmail-retrieved-from-mailbox: INBOX X-GMAIL-THRID: 1773127300804900809 X-GMAIL-MSGID: 1773127300804900809 From: AngeloGioacchino Del Regno CPR3 makes use of post-calculation flat value adjustments. Add the necessary bits to the common functions to support it. Signed-off-by: AngeloGioacchino Del Regno [Konrad: separate this patch out of a bigger one] Tested-by: Jeffrey Hugo Signed-off-by: Konrad Dybcio --- drivers/genpd/qcom/cpr-common.c | 9 ++++++--- drivers/genpd/qcom/cpr-common.h | 1 + 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/genpd/qcom/cpr-common.c b/drivers/genpd/qcom/cpr-common.c index ea85f6b4bef8..44c681bbbf13 100644 --- a/drivers/genpd/qcom/cpr-common.c +++ b/drivers/genpd/qcom/cpr-common.c @@ -49,7 +49,7 @@ int cpr_populate_ring_osc_idx(struct device *dev, EXPORT_SYMBOL_GPL(cpr_populate_ring_osc_idx); static int cpr_read_fuse_uV(int init_v_width, int step_size_uV, int ref_uV, - int step_volt, const char *init_v_efuse, + int adj, int step_volt, const char *init_v_efuse, struct device *dev) { int steps, uV; @@ -67,6 +67,9 @@ static int cpr_read_fuse_uV(int init_v_width, int step_size_uV, int ref_uV, uV = ref_uV + steps * step_size_uV; + /* Apply open-loop fixed adjustments to fused values */ + uV += adj; + return DIV_ROUND_UP(uV, step_volt) * step_volt; } @@ -119,8 +122,8 @@ int cpr_populate_fuse_common(struct device *dev, /* Populate uV */ uV = cpr_read_fuse_uV(init_v_width, init_v_step, - fdata->ref_uV, step_volt, - cpr_fuse->init_voltage, dev); + fdata->ref_uV, fdata->volt_oloop_adjust, + step_volt, cpr_fuse->init_voltage, dev); if (uV < 0) return uV; diff --git a/drivers/genpd/qcom/cpr-common.h b/drivers/genpd/qcom/cpr-common.h index 1f2ebf9394cf..0aa227617d2f 100644 --- a/drivers/genpd/qcom/cpr-common.h +++ b/drivers/genpd/qcom/cpr-common.h @@ -22,6 +22,7 @@ struct fuse_corner_data { int ref_uV; int max_uV; int min_uV; + int volt_oloop_adjust; int max_volt_scale; int max_quot_scale; /* fuse quot */ From patchwork Wed Aug 2 12:37:47 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 129828 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a59:9f41:0:b0:3e4:2afc:c1 with SMTP id v1csp451863vqx; Wed, 2 Aug 2023 06:20:09 -0700 (PDT) X-Google-Smtp-Source: APBJJlH6EpL9qUTrpzi4Nr2QuVGFcEazj93m90lDlMTSpEuVg1rvzs2c+riAimQiyXxfMsA+f4hp X-Received: by 2002:a17:90b:1e0b:b0:268:5fd9:b660 with SMTP id pg11-20020a17090b1e0b00b002685fd9b660mr15033236pjb.39.1690982409079; Wed, 02 Aug 2023 06:20:09 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1690982409; cv=none; d=google.com; s=arc-20160816; b=BnEXvIQuVWGDcbgt4fjZPvqJSoMypGhXUWyWgeqX60rWZQC4seYZBV3QkKAGFulkDA El3uM/zlViwcZ20Q+ewL6UYHjnBv5ZTAjhbQYZEhgVn0KDyePJn/gBudxG4wTWiyeEvu 7uvhKzoNMDAGVkvPkuVZ98jRRGd8BESjj9dk+HHlfvLcoE/OdKHA4ZsXc0gK5MANriE5 dT+njx6ru+nL3mhSCWHUhX8Awb3wfWKcSjeXF21r/OtJVJuSEHqnYh31Q3ZXNkwho4ca qf4xMRjB5naAGoKrWhC4tCMd2Rpuh9l1akMv3zAI2kMy8fqYjqYr1ZI/jcYy5TtBfubY oV4g== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:cc:to:in-reply-to:references:message-id :content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=/GlT2pkYBcy/nQRcCdP9T0z6uOlkGORzEMj7h5JKTHw=; fh=ahM2wzW2Lmty1oF7VdzlQW5IFLwtWPXmLAKhzW6r3bw=; b=HnQ8ULv4nLmzuBJKNDNUaP9PL8l4VbPmuewHdBMlP7547wnAVd0OjthxRKBjimGyiH F5wZh+76Fez7Ws/FKgtIeXTK8FyCzJNz1AdTqpleum+xK1FADAVxybmL7I8VVyv13Gmi XxJZ18if4Vd8lV9xp3UMcnuI4nCyCwcvOGNSLgKpB5O/Ihsvl6UHTJmR6elyijPFGg5O arWH8Uz0ujxlBtxLNVRwL4YAvJVUeDWbCU+HtRU5kNtsNYylghlOYERRNJGDB6zmwee/ 9CqOJJdBCTqHkCAqa0rSpIHj2doPpl5EAoncuzUn4Gjt6fNDYWchxgBc5Nu+FxsqY4+4 +ErQ== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=EGeobirt; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id s5-20020a17090a2f0500b0026390b4a4e0si1193035pjd.124.2023.08.02.06.19.50; Wed, 02 Aug 2023 06:20:09 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=EGeobirt; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234671AbjHBMjH (ORCPT + 99 others); Wed, 2 Aug 2023 08:39:07 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58898 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234599AbjHBMim (ORCPT ); Wed, 2 Aug 2023 08:38:42 -0400 Received: from mail-lj1-x22e.google.com (mail-lj1-x22e.google.com [IPv6:2a00:1450:4864:20::22e]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4352026BB for ; Wed, 2 Aug 2023 05:38:31 -0700 (PDT) Received: by mail-lj1-x22e.google.com with SMTP id 38308e7fff4ca-2b9bf52cd08so106514741fa.2 for ; Wed, 02 Aug 2023 05:38:30 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1690979908; x=1691584708; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=/GlT2pkYBcy/nQRcCdP9T0z6uOlkGORzEMj7h5JKTHw=; b=EGeobirt9ZFZYlcTK7eig3uqr5feCM2E9PnhB8AWfRL49d9q21Pb5i4b18IyCWSQTj rqstbkm5QixPewSuRkAM6ocwReczL6wC4F9E8yEbSo/o0WLIjC5DBDVmLL4rZCUTiS64 XQhC5LdgExAWCHk2HTEuXGFzyJbwDE/GOGrQbRvjN+6RDqOmv1/E38enotw165eSPRFI JJFxjdtZtUimzKewgz00ayvWhJmJb1ifcujhr5wtHmjZSBZhnV4q2kqTY8T4Dg2w2V1D ZFSowSPNO3laL6h7k6viwGmfUiIEK1c/owXtH78aCG7iLeOTuH3duhgX3Kv/QyhKIIIs DjIQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1690979908; x=1691584708; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=/GlT2pkYBcy/nQRcCdP9T0z6uOlkGORzEMj7h5JKTHw=; b=fytcmK5+mGj/yicEUK2oi5HMGXfnLYvztMjWJ1/ks853EH2xVTESDTZeEY0v5KszYo 2TkOGE5oho+SQjWZ8T3/uOkdx9KOjhnmRmd3lsCEdvIeo0XUgA6ZelIlgOBgifOlsqkw FXAqcThyVcVjpyYhFcH1oLPkZKhuT4iyysQM+53MaZ86dKGvUAo5bA15Pi/g1wQaYjXj Coj3mM+JXpNtPwh3xDOzeWnqBW1zxNG68jIyQJP6oByLmECcN8v6o1HYG1RShl2xb4LX DN7kZClHv0SGGp6xemHljY5Pgh5qA6En+ZqqsZNh70AhaPaZ1EdrJChzrNJJ7r+V5hqT RJxg== X-Gm-Message-State: ABy/qLabCK5OdvDWvK2wS1tLTtj2RWenPWPsuRdTgcqjfJ/WuvGhVhF+ y0mgcrlh9SIoJM/+hxvVbjiGIw== X-Received: by 2002:a2e:7011:0:b0:2b6:c886:681 with SMTP id l17-20020a2e7011000000b002b6c8860681mr5088641ljc.6.1690979908788; Wed, 02 Aug 2023 05:38:28 -0700 (PDT) Received: from [192.168.1.101] (abyk53.neoplus.adsl.tpnet.pl. [83.9.30.53]) by smtp.gmail.com with ESMTPSA id h8-20020a2e9ec8000000b002b9e5fe86dasm1897050ljk.81.2023.08.02.05.38.26 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 02 Aug 2023 05:38:28 -0700 (PDT) From: Konrad Dybcio Date: Wed, 02 Aug 2023 14:37:47 +0200 Subject: [PATCH v13 07/10] soc: qcom: cpr: Use u64 for frequency MIME-Version: 1.0 Message-Id: <20230217-topic-cpr3h-v13-7-d01cff1c54cf@linaro.org> References: <20230217-topic-cpr3h-v13-0-d01cff1c54cf@linaro.org> In-Reply-To: <20230217-topic-cpr3h-v13-0-d01cff1c54cf@linaro.org> To: AngeloGioacchino Del Regno , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Viresh Kumar , Nishanth Menon , Stephen Boyd , Niklas Cassel , Liam Girdwood , Mark Brown , Conor Dooley , "Rafael J. Wysocki" , Viresh Kumar , Ulf Hansson Cc: Robert Marko , linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-pm@vger.kernel.org, Jeffrey Hugo , Marijn Suijten , Konrad Dybcio X-Mailer: b4 0.12.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1690979891; l=4796; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=PnNJAxexYUK7Fjao2Gj25/Eg+Za0hd+877zekBWHmIc=; b=DFBbjB6mGVKC4gBxsiqg2AbCV1shtmdjVEx28n+/77OP6+8sg/uDosX58qW7Q9vGdqnAH93Xm QSPCaJF2t/QBVcHx6A1N2rrfVljdV49hk3+VeLZA62HIGIouj9bL8NQ X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED, SPF_HELO_NONE,SPF_PASS,T_SCC_BODY_TEXT_LINE,URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-getmail-retrieved-from-mailbox: INBOX X-GMAIL-THRID: 1773123570428276755 X-GMAIL-MSGID: 1773123570428276755 32 bits is not enough for over-2.changeGHz frequencies. Move all variables that operate on Hz to u64 to avoid overflows. Reviewed-by: AngeloGioacchino Del Regno Tested-by: Jeffrey Hugo Signed-off-by: Konrad Dybcio --- drivers/genpd/qcom/cpr-common.c | 13 +++++++------ drivers/genpd/qcom/cpr-common.h | 9 ++++----- drivers/genpd/qcom/cpr.c | 8 ++++---- 3 files changed, 15 insertions(+), 15 deletions(-) diff --git a/drivers/genpd/qcom/cpr-common.c b/drivers/genpd/qcom/cpr-common.c index 44c681bbbf13..3e3a4a61cfde 100644 --- a/drivers/genpd/qcom/cpr-common.c +++ b/drivers/genpd/qcom/cpr-common.c @@ -218,7 +218,7 @@ unsigned int cpr_get_fuse_corner(struct dev_pm_opp *opp) } EXPORT_SYMBOL_GPL(cpr_get_fuse_corner); -unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref, +u64 cpr_get_opp_hz_for_req(struct dev_pm_opp *ref, struct device *cpu_dev) { u64 rate = 0; @@ -250,7 +250,7 @@ unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref, out_ref: of_node_put(desc_np); - return (unsigned long) rate; + return rate; } EXPORT_SYMBOL_GPL(cpr_get_opp_hz_for_req); @@ -260,7 +260,7 @@ int cpr_calculate_scaling(struct device *dev, const struct corner *corner) { u32 quot_diff = 0; - unsigned long freq_diff; + u64 freq_diff; int scaling; const struct fuse_corner *fuse, *prev_fuse; int ret; @@ -280,8 +280,9 @@ int cpr_calculate_scaling(struct device *dev, } freq_diff = fuse->max_freq - prev_fuse->max_freq; - freq_diff /= 1000000; /* Convert to MHz */ - scaling = 1000 * quot_diff / freq_diff; + freq_diff = div_u64(freq_diff, 1000000); /* Convert to MHz */ + scaling = 1000 * quot_diff; + do_div(scaling, freq_diff); return min(scaling, fdata->max_quot_scale); } EXPORT_SYMBOL_GPL(cpr_calculate_scaling); @@ -289,7 +290,7 @@ EXPORT_SYMBOL_GPL(cpr_calculate_scaling); int cpr_interpolate(const struct corner *corner, int step_volt, const struct fuse_corner_data *fdata) { - unsigned long f_high, f_low, f_diff; + u64 f_high, f_low, f_diff; int uV_high, uV_low, uV; u64 temp, temp_limit; const struct fuse_corner *fuse, *prev_fuse; diff --git a/drivers/genpd/qcom/cpr-common.h b/drivers/genpd/qcom/cpr-common.h index 0aa227617d2f..1b2fa344eb09 100644 --- a/drivers/genpd/qcom/cpr-common.h +++ b/drivers/genpd/qcom/cpr-common.h @@ -42,7 +42,7 @@ struct fuse_corner { int step_quot; const struct reg_sequence *accs; int num_accs; - unsigned long max_freq; + u64 max_freq; u8 ring_osc_idx; }; @@ -54,13 +54,13 @@ struct corner { int quot_adjust; u32 save_ctl; u32 save_irq; - unsigned long freq; + u64 freq; struct fuse_corner *fuse_corner; }; struct corner_data { unsigned int fuse_corner; - unsigned long freq; + u64 freq; }; struct acc_desc { @@ -92,8 +92,7 @@ int cpr_populate_fuse_common(struct device *dev, int cpr_find_initial_corner(struct device *dev, struct clk *cpu_clk, struct corner *corners, int num_corners); u32 cpr_get_fuse_corner(struct dev_pm_opp *opp); -unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref, - struct device *cpu_dev); +u64 cpr_get_opp_hz_for_req(struct dev_pm_opp *ref, struct device *cpu_dev); int cpr_calculate_scaling(struct device *dev, const char *quot_offset, const struct fuse_corner_data *fdata, diff --git a/drivers/genpd/qcom/cpr.c b/drivers/genpd/qcom/cpr.c index 2cfeefebd24c..bd0ac95e86e7 100644 --- a/drivers/genpd/qcom/cpr.c +++ b/drivers/genpd/qcom/cpr.c @@ -826,8 +826,8 @@ static int cpr_corner_init(struct cpr_drv *drv) struct corner_data *cdata; const struct fuse_corner_data *fdata; bool apply_scaling; - unsigned long freq_diff, freq_diff_mhz; - unsigned long freq; + unsigned long freq_diff_mhz; + u64 freq, freq_diff; int step_volt = regulator_get_linear_step(drv->vdd_apc); struct dev_pm_opp *opp; @@ -866,7 +866,7 @@ static int cpr_corner_init(struct cpr_drv *drv) cdata[level - 1].freq = freq; fuse = &drv->fuse_corners[fnum]; - dev_dbg(drv->dev, "freq: %lu level: %u fuse level: %u\n", + dev_dbg(drv->dev, "freq: %llu level: %u fuse level: %u\n", freq, dev_pm_opp_get_level(opp) - 1, fnum); if (freq > fuse->max_freq) fuse->max_freq = freq; @@ -940,7 +940,7 @@ static int cpr_corner_init(struct cpr_drv *drv) if (apply_scaling) { freq_diff = fuse->max_freq - corner->freq; - freq_diff_mhz = freq_diff / 1000000; + freq_diff_mhz = (u32)div_u64(freq_diff, 1000000); corner->quot_adjust = scaling * freq_diff_mhz / 1000; corner->uV = cpr_interpolate(corner, step_volt, fdata); From patchwork Wed Aug 2 12:37:48 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 129818 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a59:9f41:0:b0:3e4:2afc:c1 with SMTP id v1csp438790vqx; Wed, 2 Aug 2023 06:03:03 -0700 (PDT) X-Google-Smtp-Source: APBJJlERZ9g4yJnigDHZnURlKG/4sDvJ3AoK6BlM+fynPd8iJFeknnOE2mRgozD1eD3tuUgvPOrq X-Received: by 2002:a05:6a00:2286:b0:687:570c:da2d with SMTP id f6-20020a056a00228600b00687570cda2dmr5731852pfe.12.1690981383134; Wed, 02 Aug 2023 06:03:03 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1690981383; cv=none; d=google.com; s=arc-20160816; b=DdMfWRSz7/lrtTRdqM+DoLFhsBEm3JfB/in8dexpT6wOaWEPURYcyybE6i1tLR2vmH c4MfkSqgAO6Kx5vGmUP0cRlwiywgwpv0XfdpDKYstPkfoe8J49Ae0O5jYr/ZvMPLIzfh IgrJSIMWC/tq2DV6Hv24MAZzo1G7NDdbvTm/f0r31DN8ZQ8vpOBdEv+0ELaaicrZjGkD 7NsyFGHK/0neUW2TGOG4bVJg2i75qMVTMBn8BBUtk45rz9ZXoX+WcA0434G7GXT1q/UJ jKkKJTG4n/MHBiQxIRLU4sJeDPMoJ0XivL9uiMeLRFtBXYVrPxlae2SMSADl/DDD43mw rnTA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:cc:to:in-reply-to:references:message-id :content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=l6iaGA/yeCE/Lf+ArixfofIFT/9x07smUmbo4Bxdl+U=; fh=00i92FozdW145dv//HsHG4vo6csyYOdIKUCuPIVTXBE=; b=CGjFCDX53lNKglIK8aJTi/2cgwggkYKEG1ZKd3MF6V8E+uu9LFpa0kGWlDq/XcxhYB kU202dU0cKgD/l8ey0zRipRD7L3cUMTiViXXtOK5RlmGgWLpEWG6k49f7jsRPJfMJdd/ GtlPejGXBmL5fFk/2JL11hZERpfcvQ484Dm9fDbgFNMe0903T5QPLpQIN1DempSIAlv9 8dhgOiUorxNa8/X8nr3/2ZpVE1ArMyfNN/43Mr3Mwif+qU7wuuwWX3i74fzHNibuNW81 WTbLGe87jtd+lS9DBTdVhuLAV/Y+BoFGC8HYIdIOJ5TByw7ucFVN5poC0ZKg1o6Hlu+q 80tw== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=ZFhkbOoK; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id cm25-20020a056a00339900b006871527e5cdsi8580137pfb.345.2023.08.02.06.02.12; Wed, 02 Aug 2023 06:03:03 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=ZFhkbOoK; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234622AbjHBMjP (ORCPT + 99 others); Wed, 2 Aug 2023 08:39:15 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59164 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234615AbjHBMiy (ORCPT ); Wed, 2 Aug 2023 08:38:54 -0400 Received: from mail-lj1-x22c.google.com (mail-lj1-x22c.google.com [IPv6:2a00:1450:4864:20::22c]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 247442737 for ; Wed, 2 Aug 2023 05:38:33 -0700 (PDT) Received: by mail-lj1-x22c.google.com with SMTP id 38308e7fff4ca-2b9a828c920so106345531fa.1 for ; Wed, 02 Aug 2023 05:38:33 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1690979910; x=1691584710; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=l6iaGA/yeCE/Lf+ArixfofIFT/9x07smUmbo4Bxdl+U=; b=ZFhkbOoKPak08NlBbo+Um+YLD+3thwkVLDjUH4CrnwtRzajDNTPjHA84HToPPchKbJ TkH3JEcloUM/D3KWpKx19rB2sxEDYJVjjjIiLcJsIU27pbAPn+bS97cvRp4Bl/DVBC34 V9JCZHD6DRJwob06yUgua7/dPWw/daXKhUv/pUEJCVfgZ264GUZf2At3TonSTDHacGfU ngj4ti12q/WMWvBAjfpIS1OahZx7b/J5eqQOZggWIufzYxdf79f29L2i4+dQtvZs54jd VMitD0M09SAmYfBULdrlqNClvHmZ2R2d/LtLmuqb8t/ptpYLl5uZtSpx1Vhjlg79aok8 ylAg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1690979910; x=1691584710; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=l6iaGA/yeCE/Lf+ArixfofIFT/9x07smUmbo4Bxdl+U=; b=ORjd2kB9AbQCm67uiT+TReGl6YmTi3bFq3qAD8fQR0VvDkvXE4kBkLXdk7A9FNEgV3 q6Okonfig4hw1LvsZomaHw/6VEFJHjKfTTjLlicJUTq9DAdamPWZVf7/2o0dvCJM2I3f A6phAUST1qCnTCE2sAnIfca2RVhqGybRuNimbrM7i0jwvzCiJ38wZu1ww7pLyM5hjULg GUx8QsZT043gV+conS7OFX7PfmeZIMRzsCu+vxX6irW/82tcZsnFUNLGMr8+GbkyFuhn kmC+fKrAI1auInIOaj50dh7IbPEJHAmYDdseX5cQIXLVeVCXSM/ivmIcPfPmZKALkIYl JkPQ== X-Gm-Message-State: ABy/qLZNTGFeMIG7eJXVSSc7v+nmQtQg+Y+zZGOAEuhORoRtorzYDxi3 A3Ykh9RtlCLzrEJl803hM+/52w== X-Received: by 2002:a2e:7816:0:b0:2b1:a89a:5f2b with SMTP id t22-20020a2e7816000000b002b1a89a5f2bmr4698494ljc.2.1690979910750; Wed, 02 Aug 2023 05:38:30 -0700 (PDT) Received: from [192.168.1.101] (abyk53.neoplus.adsl.tpnet.pl. [83.9.30.53]) by smtp.gmail.com with ESMTPSA id h8-20020a2e9ec8000000b002b9e5fe86dasm1897050ljk.81.2023.08.02.05.38.28 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 02 Aug 2023 05:38:30 -0700 (PDT) From: Konrad Dybcio Date: Wed, 02 Aug 2023 14:37:48 +0200 Subject: [PATCH v13 08/10] soc: qcom: cpr-common: Add threads support MIME-Version: 1.0 Message-Id: <20230217-topic-cpr3h-v13-8-d01cff1c54cf@linaro.org> References: <20230217-topic-cpr3h-v13-0-d01cff1c54cf@linaro.org> In-Reply-To: <20230217-topic-cpr3h-v13-0-d01cff1c54cf@linaro.org> To: AngeloGioacchino Del Regno , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Viresh Kumar , Nishanth Menon , Stephen Boyd , Niklas Cassel , Liam Girdwood , Mark Brown , Conor Dooley , "Rafael J. Wysocki" , Viresh Kumar , Ulf Hansson Cc: Robert Marko , linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-pm@vger.kernel.org, Jeffrey Hugo , Marijn Suijten , Konrad Dybcio , AngeloGioacchino Del Regno X-Mailer: b4 0.12.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1690979891; l=6379; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=/qN6id+G6Hc1Hg3hbtJEIbdmDiwIlOm7I1a8TXQ7Lb4=; b=1LdcyLQj3IydQrBgHW4l7MLyd4H888jdb1RNIIgUs/TR0CtDOPy6C31KmBCpGUK21qWTFtAgU Bu7TeiB4mkeDpLdhk2CPmLRhBqqDEXF6qZIXqdVD6lo/pUr6gKRSL36 X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED, SPF_HELO_NONE,SPF_PASS,T_SCC_BODY_TEXT_LINE,URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-getmail-retrieved-from-mailbox: INBOX X-GMAIL-THRID: 1773122494738726222 X-GMAIL-MSGID: 1773122494738726222 From: AngeloGioacchino Del Regno Add support for parsing per-CPR-thread data in preparation for introducing CPR3+ support. Signed-off-by: AngeloGioacchino Del Regno [Konrad: separate this patch out of a bigger one] Tested-by: Jeffrey Hugo Signed-off-by: Konrad Dybcio --- drivers/genpd/qcom/cpr-common.c | 42 ++++++++++++++++++++++++----------------- drivers/genpd/qcom/cpr-common.h | 8 ++++++-- drivers/genpd/qcom/cpr.c | 4 ++-- 3 files changed, 33 insertions(+), 21 deletions(-) diff --git a/drivers/genpd/qcom/cpr-common.c b/drivers/genpd/qcom/cpr-common.c index 3e3a4a61cfde..9001dccd4d95 100644 --- a/drivers/genpd/qcom/cpr-common.c +++ b/drivers/genpd/qcom/cpr-common.c @@ -73,35 +73,42 @@ static int cpr_read_fuse_uV(int init_v_width, int step_size_uV, int ref_uV, return DIV_ROUND_UP(uV, step_volt) * step_volt; } -const struct cpr_fuse *cpr_get_fuses(struct device *dev, +const struct cpr_fuse *cpr_get_fuses(struct device *dev, int tid, unsigned int num_fuse_corners) { struct cpr_fuse *fuses; - int i; + char cpr_name[11]; /* length of "cpr" + length of UINT_MAX (7) + \0 */ + unsigned int i; fuses = devm_kcalloc(dev, num_fuse_corners, sizeof(*fuses), GFP_KERNEL); if (!fuses) return ERR_PTR(-ENOMEM); + /* Support legacy bindings */ + if (tid == UINT_MAX) + snprintf(cpr_name, sizeof(cpr_name), "cpr"); + else + snprintf(cpr_name, sizeof(cpr_name), "cpr%d", tid); + for (i = 0; i < num_fuse_corners; i++) { - char tbuf[32]; + char tbuf[50]; - snprintf(tbuf, 32, "cpr_ring_osc%d", i + 1); + snprintf(tbuf, sizeof(tbuf), "%s_ring_osc%d", cpr_name, i + 1); fuses[i].ring_osc = devm_kstrdup(dev, tbuf, GFP_KERNEL); if (!fuses[i].ring_osc) return ERR_PTR(-ENOMEM); - snprintf(tbuf, 32, "cpr_init_voltage%d", i + 1); + snprintf(tbuf, sizeof(tbuf), "%s_init_voltage%d", cpr_name, i + 1); fuses[i].init_voltage = devm_kstrdup(dev, tbuf, GFP_KERNEL); if (!fuses[i].init_voltage) return ERR_PTR(-ENOMEM); - snprintf(tbuf, 32, "cpr_quotient%d", i + 1); + snprintf(tbuf, sizeof(tbuf), "%s_quotient%d", cpr_name, i + 1); fuses[i].quotient = devm_kstrdup(dev, tbuf, GFP_KERNEL); if (!fuses[i].quotient) return ERR_PTR(-ENOMEM); - snprintf(tbuf, 32, "cpr_quotient_offset%d", i + 1); + snprintf(tbuf, sizeof(tbuf), "%s_quotient_offset%d", cpr_name, i + 1); fuses[i].quotient_offset = devm_kstrdup(dev, tbuf, GFP_KERNEL); if (!fuses[i].quotient_offset) return ERR_PTR(-ENOMEM); @@ -202,15 +209,15 @@ int cpr_find_initial_corner(struct device *dev, struct clk *cpu_clk, } EXPORT_SYMBOL_GPL(cpr_find_initial_corner); -unsigned int cpr_get_fuse_corner(struct dev_pm_opp *opp) +unsigned int cpr_get_fuse_corner(struct dev_pm_opp *opp, u32 tid) { struct device_node *np; unsigned int fuse_corner = 0; np = dev_pm_opp_get_of_node(opp); - if (of_property_read_u32(np, "qcom,opp-fuse-level", &fuse_corner)) - pr_err("%s: missing 'qcom,opp-fuse-level' property\n", - __func__); + if (of_property_read_u32_index(np, "qcom,opp-fuse-level", tid, &fuse_corner)) + pr_err("%s: missing 'qcom,opp-fuse-level[%u]' property\n", + __func__, tid); of_node_put(np); @@ -235,15 +242,16 @@ u64 cpr_get_opp_hz_for_req(struct dev_pm_opp *ref, if (!ref_np) goto out_ref; - do { - of_node_put(child_req_np); - child_np = of_get_next_available_child(desc_np, child_np); + for_each_available_child_of_node(desc_np, child_np) { child_req_np = of_parse_phandle(child_np, "required-opps", 0); - } while (child_np && child_req_np != ref_np); - if (child_np && child_req_np == ref_np) - of_property_read_u64(child_np, "opp-hz", &rate); + if (child_np && child_req_np == ref_np) { + of_property_read_u64(child_np, "opp-hz", &rate); + goto out; + } + } +out: of_node_put(child_req_np); of_node_put(child_np); of_node_put(ref_np); diff --git a/drivers/genpd/qcom/cpr-common.h b/drivers/genpd/qcom/cpr-common.h index 1b2fa344eb09..2c5bb81ab713 100644 --- a/drivers/genpd/qcom/cpr-common.h +++ b/drivers/genpd/qcom/cpr-common.h @@ -22,6 +22,9 @@ struct fuse_corner_data { int ref_uV; int max_uV; int min_uV; + int range_uV; + /* fuse volt: closed/open loop */ + int volt_cloop_adjust; int volt_oloop_adjust; int max_volt_scale; int max_quot_scale; @@ -55,6 +58,7 @@ struct corner { u32 save_ctl; u32 save_irq; u64 freq; + bool is_open_loop; struct fuse_corner *fuse_corner; }; @@ -81,7 +85,7 @@ int cpr_populate_ring_osc_idx(struct device *dev, struct fuse_corner *fuse_corner, const struct cpr_fuse *cpr_fuse, int num_fuse_corners); -const struct cpr_fuse *cpr_get_fuses(struct device *dev, +const struct cpr_fuse *cpr_get_fuses(struct device *dev, int tid, unsigned int num_fuse_corners); int cpr_populate_fuse_common(struct device *dev, struct fuse_corner_data *fdata, @@ -91,7 +95,7 @@ int cpr_populate_fuse_common(struct device *dev, int init_v_step); int cpr_find_initial_corner(struct device *dev, struct clk *cpu_clk, struct corner *corners, int num_corners); -u32 cpr_get_fuse_corner(struct dev_pm_opp *opp); +u32 cpr_get_fuse_corner(struct dev_pm_opp *opp, u32 tid); u64 cpr_get_opp_hz_for_req(struct dev_pm_opp *ref, struct device *cpu_dev); int cpr_calculate_scaling(struct device *dev, const char *quot_offset, diff --git a/drivers/genpd/qcom/cpr.c b/drivers/genpd/qcom/cpr.c index bd0ac95e86e7..9fd26080481a 100644 --- a/drivers/genpd/qcom/cpr.c +++ b/drivers/genpd/qcom/cpr.c @@ -851,7 +851,7 @@ static int cpr_corner_init(struct cpr_drv *drv) opp = dev_pm_opp_find_level_exact(&drv->pd.dev, level); if (IS_ERR(opp)) return -EINVAL; - fc = cpr_get_fuse_corner(opp); + fc = cpr_get_fuse_corner(opp, 0); if (!fc) { dev_pm_opp_put(opp); return -EINVAL; @@ -1325,7 +1325,7 @@ static int cpr_probe(struct platform_device *pdev) if (ret) return ret; - drv->cpr_fuses = cpr_get_fuses(drv->dev, desc->num_fuse_corners); + drv->cpr_fuses = cpr_get_fuses(drv->dev, UINT_MAX, desc->num_fuse_corners); if (IS_ERR(drv->cpr_fuses)) return PTR_ERR(drv->cpr_fuses); From patchwork Wed Aug 2 12:37:49 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 129853 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a59:9f41:0:b0:3e4:2afc:c1 with SMTP id v1csp483846vqx; Wed, 2 Aug 2023 07:08:38 -0700 (PDT) X-Google-Smtp-Source: APBJJlFPcPiVx96Ihd4nhoeeZ2WSWRc5QWMKFiZeke3b6PafsYDBQ6bJVB2WwmRxmch+DDA8di6b X-Received: by 2002:a05:6e02:1bcc:b0:33a:a6de:65be with SMTP id x12-20020a056e021bcc00b0033aa6de65bemr14407032ilv.21.1690985317736; Wed, 02 Aug 2023 07:08:37 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1690985317; cv=none; d=google.com; s=arc-20160816; b=D1tVEBYQHlAzQxfSoEabffpHJXzjCVpGw45CrX1htfJXDXRhYUOTRI5mGzvs70xc3Y 76mKOqPh+tK3hZuwLTpRgJSIjkOIVYEcM1wxldWwadylbBYxL1rzOiAyulG1jyH1M8Vp fgNHNmKiwNecCgumk61G0W6VlP46xhnggL/iy5JWyQbCwNn5N0KBDFHD5nyyxN9ghfUZ Lo/RDl7Q5+nkc5LRu9x/CCqqxbGyTtMFwpAw5XWPciT7aThrmAedw/moE2L61286H03F 6nGRaaqCKikrDhutPMvIQ8AjkCgCU7UjuJpfi0bexb7XREpHtRlrcRPQRXtuNB1hrJw+ nFFg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:cc:to:in-reply-to:references:message-id :content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=Dvn3nrswFxY8Pc9k0t13Q27hxXx1CFB9eyZIiTJrIIE=; fh=00i92FozdW145dv//HsHG4vo6csyYOdIKUCuPIVTXBE=; b=LrqUx3kxkX5DbT7MlSzbymh35S9xjnKqVUCn+B7iEJC88aSUt97QUEMPIvQWgZblmx V8iVRJ//qq3OOcSfjkJns1fpzXliIbTX5SZ2yIIyqLlo72yEHHKC5W5SjSc247H3Wgsh qXmpgp5H41CL+DePTsZ5+1h38EoUOaEWTr5Lt3oRG2P8OXlXWByupoIyzPYtk/UiFeSW EAKIgA47ZfdE+SpT8M6IxVfs3j/2oTA495/1KlVe4r2C+zaK24nXFxOIlNZisiSI4JpG rNGdbws8LUTrrwSSKOhSnz81bARtMLyEqZPQqn9Hns2ne7SBFUqNbADcoaw6y2gwx99n BpOA== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=PcDWv39z; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id t12-20020a63444c000000b005639a610f7csi9767722pgk.841.2023.08.02.07.08.16; Wed, 02 Aug 2023 07:08:37 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=PcDWv39z; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234705AbjHBMj1 (ORCPT + 99 others); Wed, 2 Aug 2023 08:39:27 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58900 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234641AbjHBMi6 (ORCPT ); Wed, 2 Aug 2023 08:38:58 -0400 Received: from mail-lj1-x229.google.com (mail-lj1-x229.google.com [IPv6:2a00:1450:4864:20::229]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id E24CE30F6 for ; Wed, 2 Aug 2023 05:38:36 -0700 (PDT) Received: by mail-lj1-x229.google.com with SMTP id 38308e7fff4ca-2b9ab1725bbso106035521fa.0 for ; Wed, 02 Aug 2023 05:38:36 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1690979914; x=1691584714; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=Dvn3nrswFxY8Pc9k0t13Q27hxXx1CFB9eyZIiTJrIIE=; b=PcDWv39zQOZF+QQ3uPK6ljBgAuA5HiLdjdH6hjp9mw74bRV9I3OYtc+tVDWW1NslmP l5AF7V+x9U0CbPiOqUqXT4rLj0NFP5771cdL1HnHTeNTZ5Ab5E8rzLd/dfSTbi5ujH9k glnlNh0Ikuf1dwGbKOT/NpB8glQ/NCZTim8F4ecvsHa/cEY4WrsoDvqggUTRZN3TgScO Tz8X1D0oLnHKLPCMeqo+qkknGIqEz/9d/AKb4IdrB3im/1WDt0Nzy+hhLdtgFA200B8g yTbpXRotTYrWna7fkcuwXZPRtsUSNNL0sbYeUYZChX6qeVn9pOKJG3urosLd+/PJM5aZ X8tA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1690979914; x=1691584714; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=Dvn3nrswFxY8Pc9k0t13Q27hxXx1CFB9eyZIiTJrIIE=; b=ZHlJYPUsPiptQXRPV5lLNTVY0VW+d2KHrPQDcc8PiBOOSP7XLXmaF4j1w1doImHPc0 Tspdwjb6Pk+mlGk0HOKgwRxrRlEokNWxvoefimyWUQKVCVIX9PjAdZ2PqqEMf/JYMQEC 44BxQUEslxLhtj6OAeqF5EC/xbtxN7eis6hs8WUdoQyoUv34bfik7JDDSVdHZCch42hw tuZj9uCQecR6pqLyicJM1YfBYlynNEljSFOzX0BaJcMOpzmAXdk72kMnfCFQ161id+tY QBqIv8AbUunqxojwphkQELH/Ve9djPclSneyNqz0lhTbXUrRVLoQ6hF5FD/67cIuUVS3 mQug== X-Gm-Message-State: ABy/qLaistnCT04SK60tyAsz8BEVyeb69qnhw97GA2y7KY/kzYyzQ/nA a+vy03vd3FQC8BaUBHMaJHybTQ== X-Received: by 2002:a2e:9c4d:0:b0:2b9:ef0a:7d40 with SMTP id t13-20020a2e9c4d000000b002b9ef0a7d40mr4701418ljj.41.1690979913524; Wed, 02 Aug 2023 05:38:33 -0700 (PDT) Received: from [192.168.1.101] (abyk53.neoplus.adsl.tpnet.pl. [83.9.30.53]) by smtp.gmail.com with ESMTPSA id h8-20020a2e9ec8000000b002b9e5fe86dasm1897050ljk.81.2023.08.02.05.38.30 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 02 Aug 2023 05:38:33 -0700 (PDT) From: Konrad Dybcio Date: Wed, 02 Aug 2023 14:37:49 +0200 Subject: [PATCH v13 09/10] soc: qcom: Add support for Core Power Reduction v3, v4 and Hardened MIME-Version: 1.0 Message-Id: <20230217-topic-cpr3h-v13-9-d01cff1c54cf@linaro.org> References: <20230217-topic-cpr3h-v13-0-d01cff1c54cf@linaro.org> In-Reply-To: <20230217-topic-cpr3h-v13-0-d01cff1c54cf@linaro.org> To: AngeloGioacchino Del Regno , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Viresh Kumar , Nishanth Menon , Stephen Boyd , Niklas Cassel , Liam Girdwood , Mark Brown , Conor Dooley , "Rafael J. Wysocki" , Viresh Kumar , Ulf Hansson Cc: Robert Marko , linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-pm@vger.kernel.org, Jeffrey Hugo , Marijn Suijten , Konrad Dybcio , AngeloGioacchino Del Regno X-Mailer: b4 0.12.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1690979891; l=92703; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=e6bfMpnUj4dGtfo5X6H/oVcQbeBv2jZx8/s9157Mdak=; b=XbLjaWwMRRrrbv87eE9HOuSRJ8tLZEfhYwDIcscLpb7zKoVTnPhIycGKyUEi5xi/iy9WveR/w +U//sK+ak/3C6MA1KtC7bI/vrB3+5CljQMCtsIl37GPQlGDnh8xHsLI X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED, SPF_HELO_NONE,SPF_PASS,T_SCC_BODY_TEXT_LINE,URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-getmail-retrieved-from-mailbox: INBOX X-GMAIL-THRID: 1773126620686887618 X-GMAIL-MSGID: 1773126620686887618 From: AngeloGioacchino Del Regno This commit introduces a new driver, based on the one for cpr v1, to enable support for the newer Qualcomm Core Power Reduction hardware, known downstream as CPR3, CPR4 and CPRh, and support for MSM8998 and SDM630 CPU power reduction. In these new versions of the hardware, support for various new features was introduced, including voltage reduction for the GPU, security hardening and a new way of controlling CPU DVFS, consisting in internal communication between microcontrollers, specifically the CPR-Hardened and the Operating State Manager. The CPR v3, v4 and CPRh are present in a broad range of SoCs, from the mid-range to the high end ones including, but not limited to, MSM8953/8996/8998, SDM630/636/660/845. Signed-off-by: AngeloGioacchino Del Regno [Konrad: rebase, apply review comments] Tested-by: Jeffrey Hugo Signed-off-by: Konrad Dybcio --- drivers/genpd/qcom/Makefile | 4 +- drivers/genpd/qcom/cpr-common.h | 2 + drivers/genpd/qcom/cpr3.c | 2855 +++++++++++++++++++++++++++++++++++++++ drivers/soc/qcom/Kconfig | 22 + include/soc/qcom/cpr.h | 17 + 5 files changed, 2899 insertions(+), 1 deletion(-) diff --git a/drivers/genpd/qcom/Makefile b/drivers/genpd/qcom/Makefile index b28c8d9128c4..522472017e48 100644 --- a/drivers/genpd/qcom/Makefile +++ b/drivers/genpd/qcom/Makefile @@ -1,4 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_QCOM_CPR) += cpr-common.o cpr.o +obj-$(CONFIG_QCOM_CPR) += cpr.o +obj-$(CONFIG_QCOM_CPR_COMMON) += cpr-common.o +obj-$(CONFIG_QCOM_CPR3) += cpr3.o obj-$(CONFIG_QCOM_RPMPD) += rpmpd.o obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o diff --git a/drivers/genpd/qcom/cpr-common.h b/drivers/genpd/qcom/cpr-common.h index 2c5bb81ab713..17f55bbc4a11 100644 --- a/drivers/genpd/qcom/cpr-common.h +++ b/drivers/genpd/qcom/cpr-common.h @@ -65,6 +65,8 @@ struct corner { struct corner_data { unsigned int fuse_corner; u64 freq; + int oloop_vadj; + int cloop_vadj; }; struct acc_desc { diff --git a/drivers/genpd/qcom/cpr3.c b/drivers/genpd/qcom/cpr3.c new file mode 100644 index 000000000000..6ee74f80d2cb --- /dev/null +++ b/drivers/genpd/qcom/cpr3.c @@ -0,0 +1,2855 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2013-2020, The Linux Foundation. All rights reserved. + * Copyright (c) 2019 Linaro Limited + * Copyright (c) 2021, AngeloGioacchino Del Regno + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cpr-common.h" + +#define CPR3_RO_COUNT 16 +#define CPR3_RO_MASK GENMASK(CPR3_RO_COUNT - 1, 0) + +/* CPR3 registers */ +#define CPR3_REG_CPR_VERSION 0x0 +#define CPRH_CPR_VERSION_4P5 0x40050000 + +#define CPR3_REG_CPR_CTL 0x4 +#define CPR3_CPR_CTL_LOOP_EN_MASK BIT(0) +#define CPR3_CPR_CTL_IDLE_CLOCKS_MASK GENMASK(5, 1) +#define CPR3_CPR_CTL_COUNT_MODE_MASK GENMASK(7, 6) + #define CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MIN 0 + #define CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MAX 1 + #define CPR3_CPR_CTL_COUNT_MODE_STAGGERED 2 + #define CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_AGE 3 +#define CPR3_CPR_CTL_COUNT_REPEAT_MASK GENMASK(31, 9) + +#define CPR3_REG_CPR_STATUS 0x8 +#define CPR3_CPR_STATUS_BUSY_MASK BIT(0) + +/* + * This register is not present on controllers that support HW closed-loop + * except CPR4 APSS controller. + */ +#define CPR3_REG_CPR_TIMER_AUTO_CONT 0xC + +#define CPR3_REG_CPR_STEP_QUOT 0x14 +#define CPR3_CPR_STEP_QUOT_MIN_MASK GENMASK(5, 0) +#define CPR3_CPR_STEP_QUOT_MAX_MASK GENMASK(11, 6) +#define CPRH_DELTA_QUOT_STEP_FACTOR 4 + +#define CPR3_REG_GCNT(ro) (0xA0 + 0x4 * (ro)) +#define CPR3_REG_SENSOR_OWNER(sensor) (0x200 + 0x4 * (sensor)) + +#define CPR3_REG_CONT_CMD 0x800 +#define CPR3_CONT_CMD_ACK 0x1 +#define CPR3_CONT_CMD_NACK 0x0 + +#define CPR3_REG_THRESH(thread) (0x808 + 0x440 * (thread)) +#define CPR3_THRESH_CONS_DOWN_MASK GENMASK(3, 0) +#define CPR3_THRESH_CONS_UP_MASK GENMASK(7, 4) +#define CPR3_THRESH_DOWN_THRESH_MASK GENMASK(12, 8) +#define CPR3_THRESH_UP_THRESH_MASK GENMASK(17, 13) + +#define CPR3_REG_RO_MASK(thread) (0x80C + 0x440 * (thread)) + +#define CPR3_REG_RESULT0(thread) (0x810 + 0x440 * (thread)) +#define CPR3_RESULT0_BUSY_MASK BIT(0) +#define CPR3_RESULT0_STEP_DN_MASK BIT(1) +#define CPR3_RESULT0_STEP_UP_MASK BIT(2) +#define CPR3_RESULT0_ERROR_STEPS_MASK GENMASK(7, 3) +#define CPR3_RESULT0_ERROR_MASK GENMASK(19, 8) +#define CPR3_RESULT0_NEG_MASK BIT(20) + +#define CPR3_REG_RESULT1(thread) (0x814 + 0x440 * (thread)) +#define CPR3_RESULT1_QUOT_MIN_MASK GENMASK(11, 0) +#define CPR3_RESULT1_QUOT_MAX_MASK GENMASK(23, 12) +#define CPR3_RESULT1_RO_MIN_MASK GENMASK(27, 24) +#define CPR3_RESULT1_RO_MAX_MASK GENMASK(31, 28) + +#define CPR3_REG_RESULT2(thread) (0x818 + 0x440 * (thread)) +#define CPR3_RESULT2_STEP_QUOT_MIN_MASK GENMASK(5, 0) +#define CPR3_RESULT2_STEP_QUOT_MAX_MASK GENMASK(11, 6) +#define CPR3_RESULT2_SENSOR_MIN_MASK GENMASK(23, 16) +#define CPR3_RESULT2_SENSOR_MAX_MASK GENMASK(31, 24) + +#define CPR3_REG_IRQ_EN 0x81C +#define CPR3_REG_IRQ_CLEAR 0x820 +#define CPR3_REG_IRQ_STATUS 0x824 +#define CPR3_IRQ_UP BIT(3) +#define CPR3_IRQ_MID BIT(2) +#define CPR3_IRQ_DOWN BIT(1) +#define CPR3_IRQ_ALL (CPR3_IRQ_UP | CPR3_IRQ_MID | CPR3_IRQ_DOWN) + +#define CPR3_REG_TARGET_QUOT(thread, ro) (0x840 + 0x440 * (thread) + 0x4 * (ro)) + +/* Registers found only on controllers that support HW closed-loop. */ +#define CPR3_REG_PD_THROTTLE 0xE8 + +#define CPR3_REG_HW_CLOSED_LOOP_DISABLED 0x3000 +#define CPR3_REG_CPR_TIMER_MID_CONT 0x3004 +#define CPR3_REG_CPR_TIMER_UP_DN_CONT 0x3008 + +/* CPR4 controller specific registers and bit definitions */ +#define CPR4_REG_CPR_TIMER_CLAMP 0x10 +#define CPR4_CPR_TIMER_CLAMP_THREAD_AGGREGATION_EN BIT(27) + +#define CPR4_REG_MISC 0x700 +#define CPR4_MISC_RESET_STEP_QUOT_LOOP_EN BIT(2) +#define CPR4_MISC_THREAD_HAS_ALWAYS_VOTE_EN BIT(3) + +#define CPR4_REG_SAW_ERROR_STEP_LIMIT 0x7A4 +#define CPR4_SAW_ERROR_STEP_LIMIT_UP_MASK GENMASK(4, 0) +#define CPR4_SAW_ERROR_STEP_LIMIT_UP_SHIFT 0 +#define CPR4_SAW_ERROR_STEP_LIMIT_DN_MASK GENMASK(9, 5) +#define CPR4_SAW_ERROR_STEP_LIMIT_DN_SHIFT 5 + +#define CPR4_REG_MARGIN_TEMP_CORE_TIMERS 0x7A8 +#define CPR4_MARGIN_TEMP_CORE_TIMERS_SETTLE_VOLTAGE_COUNT_MASK GENMASK(28, 18) +#define CPR4_MARGIN_TEMP_CORE_TIMERS_SETTLE_VOLTAGE_COUNT_SHFT 18 + +#define CPR4_REG_MARGIN_ADJ_CTL 0x7F8 +#define CPR4_MARGIN_ADJ_HW_CLOSED_LOOP_EN BIT(4) +#define CPR4_MARGIN_ADJ_PER_RO_KV_MARGIN_EN BIT(7) +#define CPR4_MARGIN_ADJ_PMIC_STEP_SIZE_MASK GENMASK(16, 12) +#define CPR4_MARGIN_ADJ_PMIC_STEP_SIZE_SHIFT 12 +#define CPR4_MARGIN_ADJ_KV_MARGIN_ADJ_STEP_QUOT_MASK GENMASK(31, 26) +#define CPR4_MARGIN_ADJ_KV_MARGIN_ADJ_STEP_QUOT_SHIFT 26 + +#define CPR4_REG_CPR_MASK_THREAD(thread) (0x80C + 0x440 * (thread)) +#define CPR4_CPR_MASK_THREAD_DISABLE_THREAD BIT(31) +#define CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK GENMASK(15, 0) + +/* CPRh controller specific registers and bit definitions */ +#define __CPRH_REG_CORNER(rbase, tbase, tid, cnum) (rbase + (tbase * tid) + (0x4 * cnum)) +#define CPRH_REG_CORNER(d, t, c) __CPRH_REG_CORNER(d->reg_corner, d->reg_corner_tid, t, c) + +#define CPRH_CTL_OSM_ENABLED BIT(0) +#define CPRH_CTL_BASE_VOLTAGE_MASK GENMASK(10, 1) +#define CPRH_CTL_BASE_VOLTAGE_SHIFT 1 +#define CPRH_CTL_MODE_SWITCH_DELAY_MASK GENMASK(24, 17) +#define CPRH_CTL_MODE_SWITCH_DELAY_SHIFT 17 +#define CPRH_CTL_VOLTAGE_MULTIPLIER_MASK GENMASK(28, 25) +#define CPRH_CTL_VOLTAGE_MULTIPLIER_SHIFT 25 + +#define CPRH_CORNER_INIT_VOLTAGE_MASK GENMASK(7, 0) +#define CPRH_CORNER_FLOOR_VOLTAGE_MASK GENMASK(15, 8) +#define CPRH_CORNER_QUOT_DELTA_MASK GENMASK(24, 16) +#define CPRH_CORNER_RO_SEL_MASK GENMASK(28, 25) +#define CPRH_CORNER_CPR_CL_DISABLE BIT(29) + +#define CPRH_CORNER_INIT_VOLTAGE_MAX_VALUE 255 +#define CPRH_CORNER_FLOOR_VOLTAGE_MAX_VALUE 255 +#define CPRH_CORNER_QUOT_DELTA_MAX_VALUE 511 + +enum cpr_type { + CTRL_TYPE_CPR3, + CTRL_TYPE_CPR4, + CTRL_TYPE_CPRH, + CTRL_TYPE_MAX, +}; + +/* + * struct cpr_thread_desc - CPR Thread-specific parameters + * + * @controller_id: Identifier of the CPR controller expected by the HW + * @hw_tid: Identifier of the CPR thread expected by the HW + * @ro_scaling_factor: Scaling factor for each ring oscillator entry + * @ro_scaling_factor_common: Whether the ro_scaling_factor value is common for all fuses + * @init_voltage_step: Voltage in uV for number of steps read from fuse array + * @init_voltage_width: Bit-width of the voltage read from the fuse array + * @sensor_range_start: First sensor ID used by a thread + * @sensor_range_end: Last sensor ID used by a thread + * @step_quot_init_min: Minimum achievable step quotient for this corner + * @step_quot_init_max: Maximum achievable step quotient for this corner + * @num_fuse_corners: Number of valid entries in fuse_corner_data + * @fuse_corner_data: Parameters for calculation of each fuse corner + */ +struct cpr_thread_desc { + u8 controller_id; + u8 hw_tid; + const int (*ro_scaling_factor)[CPR3_RO_COUNT]; + bool ro_scaling_factor_common; + int init_voltage_step; + int init_voltage_width; + u8 sensor_range_start; + u8 sensor_range_end; + u8 step_quot_init_min; + u8 step_quot_init_max; + unsigned int num_fuse_corners; + struct fuse_corner_data *fuse_corner_data; +}; + +/* + * struct cpr_desc - Driver instance-wide CPR parameters + * + * @cpr_type: Type (base version) of the CPR controller + * @num_threads: Max. number of threads supported by this controller + * @timer_delay_us: Loop delay time in uS + * @timer_updn_delay_us: Voltage after-up/before-down delay time in uS + * @timer_cons_up: Wait between consecutive up requests in uS + * @timer_cons_down: Wait between consecutive down requests in uS + * @up_threshold: Generic corner up threshold + * @down_threshold: Generic corner down threshold + * @idle_clocks: CPR Sensor: idle timer in cpr clocks unit + * @count_mode: CPR Sensor: counting mode + * @count_repeat: CPR Sensor: number of times to repeat reading + * @gcnt_us: CPR measurement interval in uS + * @vreg_step_fixed: Regulator voltage per step (if vreg unusable) + * @vreg_step_up_limit: Num. of steps up at once before re-measuring sensors + * @vreg_step_down_limit: Num. of steps dn at once before re-measuring sensors + * @vdd_settle_time_us: Settling timer to account for one VDD supply step + * @corner_settle_time_us: Settle time for corner switch request + * @mem_acc_threshold: Memory Accelerator (MEM-ACC) voltage threshold + * @apm_threshold: Array Power Mux (APM) voltage threshold + * @apm_crossover: Array Power Mux (APM) corner crossover voltage + * @apm_hysteresis: Hysteresis for APM V-threshold related calculations + * @cpr_base_voltage: Safety: Absolute minimum voltage (uV) on this CPR + * @cpr_max_voltage: Safety: Absolute maximum voltage (uV) on this CPR + * @pd_throttle_val: CPR Power Domain throttle during voltage switch + * @threads: Array containing "CPR Thread" specific parameters + * @reduce_to_fuse_uV: Reduce corner max volts (if higher) to fuse ceiling + * @reduce_to_corner_uV: Reduce corner max volts (if higher) to corner ceil. + * @hw_closed_loop_en: Enable CPR HW Closed-Loop voltage auto-adjustment + */ +struct cpr_desc { + enum cpr_type cpr_type; + unsigned int num_threads; + unsigned int timer_delay_us; + u8 timer_updn_delay_us; + u8 timer_cons_up; + u8 timer_cons_down; + u8 up_threshold; + u8 down_threshold; + u8 idle_clocks; + u8 count_mode; + u8 count_repeat; + u8 gcnt_us; + u16 vreg_step_fixed; + u8 vreg_step_up_limit; + u8 vreg_step_down_limit; + u8 vdd_settle_time_us; + u8 corner_settle_time_us; + int mem_acc_threshold; + int apm_threshold; + int apm_crossover; + int apm_hysteresis; + u32 cpr_base_voltage; + u32 cpr_max_voltage; + u32 pd_throttle_val; + + const struct cpr_thread_desc **threads; + bool reduce_to_fuse_uV; + bool reduce_to_corner_uV; + bool hw_closed_loop_en; +}; + +struct cpr_drv; +struct cpr_thread { + int num_corners; + int id; + bool enabled; + void __iomem *base; + struct clk *cpu_clk; + struct corner *corner; + struct corner *corners; + struct fuse_corner *fuse_corners; + struct cpr_drv *drv; + struct cpr_ext_data ext_data; + struct generic_pm_domain pd; + struct device *attached_cpu_dev; + struct work_struct restart_work; + bool restarting; + + const struct cpr_fuse *cpr_fuses; + const struct cpr_thread_desc *desc; +}; + +struct cpr_drv { + int irq; + unsigned int ref_clk_khz; + struct device *dev; + struct mutex lock; + struct regulator *vreg; + struct regmap *tcsr; + u32 gcnt; + u32 speed_bin; + u32 fusing_rev; + u32 last_uV; + u32 cpr_hw_rev; + u32 reg_corner; + u32 reg_corner_tid; + u32 reg_ctl; + u32 reg_status; + int fuse_level_set; + int extra_corners; + unsigned int vreg_step; + bool enabled; + + struct cpr_thread *threads; + struct genpd_onecell_data cell_data; + + const struct cpr_desc *desc; + const struct acc_desc *acc_desc; + struct dentry *debugfs; +}; + +/** + * cpr_get_corner_post_vadj() - Get corner post-voltage adjustment values + * @opp: Pointer to the corresponding OPP struct + * @tid: CPR thread ID + * @open_loop: Pointer to the closed-loop adjustment value + * @closed_loop: Pointer to the open-loop adjustment value + * + * Return: 0 on success, negative errno on failure + */ +static int cpr_get_corner_post_vadj(struct dev_pm_opp *opp, u32 tid, + s32 *open_loop, s32 *closed_loop) +{ + struct device_node *np; + int ret; + + /* + * There is no of_property_read_s32_index, so we just store the + * result into a s32 variable. After all, the OF API is doing + * the exact same for of_property_read_s32... + */ + np = dev_pm_opp_get_of_node(opp); + + ret = of_property_read_u32_index(np, "qcom,opp-oloop-vadj", + tid, open_loop); + if (ret) + goto out; + + ret = of_property_read_u32_index(np, "qcom,opp-cloop-vadj", + tid, closed_loop); + +out: + of_node_put(np); + return ret; +} + +static void cpr_write(struct cpr_thread *thread, u32 offset, u32 value) +{ + writel(value, thread->base + offset); +} + +static u32 cpr_read(struct cpr_thread *thread, u32 offset) +{ + return readl(thread->base + offset); +} + +static void +cpr_masked_write(struct cpr_thread *thread, u32 offset, u32 mask, u32 value) +{ + u32 val; + + val = readl(thread->base + offset); + val &= ~mask; + val |= value & mask; + writel(val, thread->base + offset); +} + +static void cpr_irq_clr(struct cpr_thread *thread) +{ + cpr_write(thread, CPR3_REG_IRQ_CLEAR, CPR3_IRQ_ALL); +} + +static void cpr_irq_clr_nack(struct cpr_thread *thread) +{ + cpr_irq_clr(thread); + cpr_write(thread, CPR3_REG_CONT_CMD, CPR3_CONT_CMD_NACK); +} + +static void cpr_irq_clr_ack(struct cpr_thread *thread) +{ + cpr_irq_clr(thread); + cpr_write(thread, CPR3_REG_CONT_CMD, CPR3_CONT_CMD_ACK); +} + +static void cpr_irq_set(struct cpr_thread *thread, u32 int_bits) +{ + /* On CPR-hardened, interrupts are managed by and on firmware */ + if (thread->drv->desc->cpr_type == CTRL_TYPE_CPRH) + return; + + cpr_write(thread, CPR3_REG_IRQ_EN, int_bits); +} + +/** + * cpr_ctl_enable() - Enable CPR thread + * @thread: Structure holding CPR thread-specific parameters + */ +static void cpr_ctl_enable(struct cpr_thread *thread) +{ + if (thread->drv->enabled && !thread->restarting) { + cpr_masked_write(thread, CPR3_REG_CPR_CTL, + CPR3_CPR_CTL_LOOP_EN_MASK, + CPR3_CPR_CTL_LOOP_EN_MASK); + } +} + +/** + * cpr_ctl_disable() - Disable CPR thread + * @thread: Structure holding CPR thread-specific parameters + */ +static void cpr_ctl_disable(struct cpr_thread *thread) +{ + const struct cpr_desc *desc = thread->drv->desc; + + if (desc->cpr_type != CTRL_TYPE_CPRH) { + cpr_irq_set(thread, 0); + cpr_irq_clr(thread); + } + + cpr_masked_write(thread, CPR3_REG_CPR_CTL, + CPR3_CPR_CTL_LOOP_EN_MASK, 0); +} + +/** + * cpr_ctl_is_enabled() - Check if thread is enabled + * @thread: Structure holding CPR thread-specific parameters + * + * Return: true if the CPR is enabled, false if it is disabled. + */ +static bool cpr_ctl_is_enabled(struct cpr_thread *thread) +{ + u32 reg_val; + + reg_val = cpr_read(thread, CPR3_REG_CPR_CTL); + return reg_val & CPR3_CPR_CTL_LOOP_EN_MASK; +} + +/** + * cpr_check_any_thread_busy() - Check if HW is done processing + * @thread: Structure holding CPR thread-specific parameters + * + * Return: true if the CPR is busy, false if it is ready. + */ +static bool cpr_check_any_thread_busy(struct cpr_thread *thread) +{ + int i; + + for (i = 0; i < thread->drv->desc->num_threads; i++) + if (cpr_read(thread, CPR3_REG_RESULT0(i)) & + CPR3_RESULT0_BUSY_MASK) + return true; + + return false; +} + +static void cpr_restart_worker(struct work_struct *work) +{ + struct cpr_thread *thread = container_of(work, struct cpr_thread, + restart_work); + struct cpr_drv *drv = thread->drv; + int i; + + mutex_lock(&drv->lock); + + thread->restarting = true; + cpr_ctl_disable(thread); + disable_irq(drv->irq); + + mutex_unlock(&drv->lock); + + for (i = 0; i < 20; i++) { + u32 cpr_status = cpr_read(thread, CPR3_REG_CPR_STATUS); + u32 ctl = cpr_read(thread, CPR3_REG_CPR_CTL); + + if ((cpr_status & CPR3_CPR_STATUS_BUSY_MASK) && + !(ctl & CPR3_CPR_CTL_LOOP_EN_MASK)) + break; + + udelay(10); + } + + cpr_irq_clr(thread); + + for (i = 0; i < 20; i++) { + u32 status = cpr_read(thread, CPR3_REG_IRQ_STATUS); + + if (!(status & CPR3_IRQ_ALL)) + break; + udelay(10); + } + + mutex_lock(&drv->lock); + + thread->restarting = false; + enable_irq(drv->irq); + cpr_ctl_enable(thread); + + mutex_unlock(&drv->lock); +} + +/** + * cpr_corner_restore() - Restore saved corner level + * @thread: Structure holding CPR thread-specific parameters + * @corner: Structure holding the saved corner level + */ +static void cpr_corner_restore(struct cpr_thread *thread, + struct corner *corner) +{ + struct cpr_drv *drv = thread->drv; + struct fuse_corner *fuse = corner->fuse_corner; + const struct cpr_thread_desc *tdesc = thread->desc; + u32 ro_sel = fuse->ring_osc_idx; + + cpr_write(thread, CPR3_REG_GCNT(ro_sel), drv->gcnt); + + cpr_write(thread, CPR3_REG_RO_MASK(tdesc->hw_tid), + CPR3_RO_MASK & ~BIT(ro_sel)); + + cpr_write(thread, CPR3_REG_TARGET_QUOT(tdesc->hw_tid, ro_sel), + fuse->quot - corner->quot_adjust); + + if (drv->desc->cpr_type == CTRL_TYPE_CPR4) + cpr_masked_write(thread, + CPR4_REG_CPR_MASK_THREAD(tdesc->hw_tid), + CPR4_CPR_MASK_THREAD_DISABLE_THREAD | + CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK, 0); + + thread->corner = corner; + corner->last_uV = corner->uV; +} + +/** + * cpr_set_acc() - Set fuse level to the mem-acc + * @drv: Main driver structure + * @f: Fuse level + */ +static void cpr_set_acc(struct cpr_drv *drv, int f) +{ + const struct acc_desc *desc = drv->acc_desc; + struct reg_sequence *s = desc->settings; + int n = desc->num_regs_per_fuse; + + if (!s || f == drv->fuse_level_set) + return; + + regmap_multi_reg_write(drv->tcsr, s + (n * f), n); + drv->fuse_level_set = f; +} + +/** + * cpr_pre_voltage() - Actions to execute before setting voltage + * @thread: Structure holding CPR thread-specific parameters + * @dir: Enumeration for voltage change direction + * @fuse_level: Fuse corner for mem-acc, if supported. + * + * Return: Zero for success or negative number on errors. + */ +static int cpr_pre_voltage(struct cpr_thread *thread, + enum voltage_change_dir dir, + int fuse_level) +{ + struct cpr_drv *drv = thread->drv; + + if (drv->desc->cpr_type == CTRL_TYPE_CPR3 && + drv->desc->pd_throttle_val) + cpr_write(thread, CPR3_REG_PD_THROTTLE, + drv->desc->pd_throttle_val); + + if (drv->tcsr && dir == DOWN) + cpr_set_acc(drv, fuse_level); + + return 0; +} + +/** + * cpr_post_voltage() - Actions to execute after setting voltage + * @thread: Structure holding CPR thread-specific parameters + * @dir: Enumeration for voltage change direction + * @fuse_level: Fuse corner for mem-acc, if supported. + * + * Return: Zero for success or negative number on errors. + */ +static int cpr_post_voltage(struct cpr_thread *thread, + enum voltage_change_dir dir, + int fuse_level) +{ + struct cpr_drv *drv = thread->drv; + + if (drv->tcsr && dir == UP) + cpr_set_acc(drv, fuse_level); + + if (drv->desc->cpr_type == CTRL_TYPE_CPR3) + cpr_write(thread, CPR3_REG_PD_THROTTLE, 0); + + return 0; +} + +/** + * cpr_commit_state() - Set the newly requested voltage + * @thread: Structure holding CPR thread-specific parameters + * + * Return: IRQ_SUCCESS for success, IRQ_NONE if the CPR is disabled. + */ +static int cpr_commit_state(struct cpr_thread *thread) +{ + struct cpr_drv *drv = thread->drv; + int min_uV = 0, max_uV = 0, new_uV = 0, fuse_level = 0; + enum voltage_change_dir dir; + u32 next_irqmask = 0; + int ret, i; + + /* On CPRhardened, control states are managed in firmware */ + if (drv->desc->cpr_type == CTRL_TYPE_CPRH) + return 0; + + for (i = 0; i < drv->desc->num_threads; i++) { + struct cpr_thread *thread = &drv->threads[i]; + + if (!thread->corner) + continue; + + fuse_level = max(fuse_level, + (int) (thread->corner->fuse_corner - + &thread->fuse_corners[0])); + + max_uV = max(max_uV, thread->corner->max_uV); + min_uV = max(min_uV, thread->corner->min_uV); + new_uV = max(new_uV, thread->corner->last_uV); + } + dev_vdbg(drv->dev, "%s: new uV: %d, last uV: %d\n", + __func__, new_uV, drv->last_uV); + + /* + * Safety measure: if the voltage is out of the globally allowed + * range, then go out and warn the user. + * This should *never* happen. + */ + if (new_uV > drv->desc->cpr_max_voltage || + new_uV < drv->desc->cpr_base_voltage) { + dev_warn(drv->dev, "Voltage (%u uV) out of range.", new_uV); + return -EINVAL; + } + + if (new_uV == drv->last_uV || fuse_level == drv->fuse_level_set) + goto out; + + if (fuse_level > drv->fuse_level_set) + dir = UP; + else + dir = DOWN; + + ret = cpr_pre_voltage(thread, fuse_level, dir); + if (ret) + return ret; + + dev_vdbg(drv->dev, "setting voltage: %d\n", new_uV); + + ret = regulator_set_voltage(drv->vreg, new_uV, new_uV); + if (ret) { + dev_err_ratelimited(drv->dev, "failed to set voltage %d: %d\n", new_uV, ret); + return ret; + } + + ret = cpr_post_voltage(thread, fuse_level, dir); + if (ret) + return ret; + + drv->last_uV = new_uV; +out: + if (new_uV > min_uV) + next_irqmask |= CPR3_IRQ_DOWN; + if (new_uV < max_uV) + next_irqmask |= CPR3_IRQ_UP; + + cpr_irq_set(thread, next_irqmask); + + return 0; +} + +static unsigned int cpr_get_cur_perf_state(struct cpr_thread *thread) +{ + return thread->corner ? thread->corner - thread->corners + 1 : 0; +} + +/** + * cpr_scale() - Calculate new voltage for the received direction + * @thread: Structure holding CPR thread-specific parameters + * @dir: Enumeration for voltage change direction + * + * The CPR scales one by one: this function calculates the new + * voltage to set when a voltage-UP or voltage-DOWN request comes + * and stores it into the per-thread structure that gets passed. + */ +static void cpr_scale(struct cpr_thread *thread, enum voltage_change_dir dir) +{ + struct cpr_drv *drv = thread->drv; + const struct cpr_thread_desc *tdesc = thread->desc; + u32 val, error_steps; + int last_uV, new_uV; + struct corner *corner; + + if (dir != UP && dir != DOWN) + return; + + corner = thread->corner; + val = cpr_read(thread, CPR3_REG_RESULT0(tdesc->hw_tid)); + error_steps = FIELD_GET(CPR3_RESULT0_ERROR_STEPS_MASK, val); + + last_uV = corner->last_uV; + + if (dir == UP) { + if (!(val & CPR3_RESULT0_STEP_UP_MASK)) + return; + + /* Calculate new voltage */ + new_uV = last_uV + drv->vreg_step; + new_uV = min(new_uV, corner->max_uV); + + dev_vdbg(drv->dev, "[T%u] UP - new_uV=%d last_uV=%d p-state=%u st=%u\n", + thread->id, new_uV, last_uV, + cpr_get_cur_perf_state(thread), error_steps); + } else { + if (!(val & CPR3_RESULT0_STEP_DN_MASK)) + return; + + /* Calculate new voltage */ + new_uV = last_uV - drv->vreg_step; + new_uV = max(new_uV, corner->min_uV); + dev_vdbg(drv->dev, "[T%u] DOWN - new_uV=%d last_uV=%d p-state=%u st=%u\n", + thread->id, new_uV, last_uV, + cpr_get_cur_perf_state(thread), error_steps); + } + corner->last_uV = new_uV; +} + +/** + * cpr_irq_handler() - Handle CPR3/CPR4 status interrupts + * @irq: Number of the interrupt + * @dev: Pointer to the cpr_thread structure + * + * Handle the interrupts coming from non-hardened CPR HW as to get + * an ok to scale voltages immediately, or to pass error status to + * the hardware (either success/ACK or failure/NACK). + * + * Return: IRQ_SUCCESS for success, IRQ_NONE if the CPR is disabled. + */ +static irqreturn_t cpr_irq_handler(int irq, void *dev) +{ + struct cpr_thread *thread = dev; + struct cpr_drv *drv = thread->drv; + irqreturn_t ret = IRQ_HANDLED; + int i, rc; + enum voltage_change_dir dir = NO_CHANGE; + u32 val; + + mutex_lock(&drv->lock); + + val = cpr_read(thread, CPR3_REG_IRQ_STATUS); + + dev_vdbg(drv->dev, "IRQ_STATUS = 0x%x\n", val); + + if (!cpr_ctl_is_enabled(thread)) { + dev_vdbg(drv->dev, "CPR is disabled\n"); + ret = IRQ_NONE; + } else if (cpr_check_any_thread_busy(thread)) { + cpr_irq_clr_nack(thread); + dev_dbg(drv->dev, "CPR measurement is not ready\n"); + } else { + /* + * Following sequence of handling is as per each IRQ's + * priority + */ + if (val & CPR3_IRQ_UP) + dir = UP; + else if (val & CPR3_IRQ_DOWN) + dir = DOWN; + + if (dir != NO_CHANGE) { + for (i = 0; i < drv->desc->num_threads; i++) { + thread = &drv->threads[i]; + cpr_scale(thread, dir); + } + + rc = cpr_commit_state(thread); + if (rc) + cpr_irq_clr_nack(thread); + else + cpr_irq_clr_ack(thread); + } else if (val & CPR3_IRQ_MID) { + dev_dbg(drv->dev, "IRQ occurred for Mid Flag\n"); + } else { + dev_warn(drv->dev, "IRQ occurred for unknown flag (%#08x)\n", val); + schedule_work(&thread->restart_work); + } + } + + mutex_unlock(&drv->lock); + + return ret; +} + +static int cpr_switch(struct cpr_drv *drv) +{ + int i, ret; + bool enabled = false; + + if (drv->desc->cpr_type == CTRL_TYPE_CPRH) + return 0; + + for (i = 0; i < drv->desc->num_threads && !enabled; i++) + enabled = drv->threads[i].enabled; + + dev_vdbg(drv->dev, "%s: enabled = %d\n", __func__, enabled); + + if (enabled == drv->enabled) + return 0; + + if (enabled) { + ret = regulator_enable(drv->vreg); + if (ret) + return ret; + + drv->enabled = enabled; + + for (i = 0; i < drv->desc->num_threads; i++) + if (drv->threads[i].corner) + break; + + if (i < drv->desc->num_threads) { + cpr_irq_clr(&drv->threads[i]); + + cpr_commit_state(&drv->threads[i]); + cpr_ctl_enable(&drv->threads[i]); + } + } else { + for (i = 0; i < drv->desc->num_threads && !enabled; i++) + cpr_ctl_disable(&drv->threads[i]); + + drv->enabled = enabled; + + ret = regulator_disable(drv->vreg); + if (ret < 0) + return ret; + } + + return 0; +} + +/** + * cpr_enable() - Enables a CPR thread + * @thread: Structure holding CPR thread-specific parameters + * + * Return: Zero for success or negative number on errors. + */ +static int cpr_enable(struct cpr_thread *thread) +{ + struct cpr_drv *drv = thread->drv; + int ret; + + dev_dbg(drv->dev, "Enabling thread %d\n", thread->id); + + mutex_lock(&drv->lock); + + thread->enabled = true; + ret = cpr_switch(thread->drv); + + mutex_unlock(&drv->lock); + + return ret; +} + +/** + * cpr_disable() - Disables a CPR thread + * @thread: Structure holding CPR thread-specific parameters + * + * Return: Zero for success or negative number on errors. + */ +static int cpr_disable(struct cpr_thread *thread) +{ + struct cpr_drv *drv = thread->drv; + int ret; + + dev_dbg(drv->dev, "Disabling thread %d\n", thread->id); + + mutex_lock(&drv->lock); + + thread->enabled = false; + ret = cpr_switch(thread->drv); + + mutex_unlock(&drv->lock); + + return ret; +} + +/** + * cpr_configure() - Configure main HW parameters + * @thread: Structure holding CPR thread-specific parameters + * + * This function configures the main CPR hardware parameters, such as + * internal timers (and delays), sensor ownerships, activates and/or + * deactivates cpr-threads and others, as one sequence for all of the + * versions supported in this driver. By design, the function may + * return a success earlier if the sequence for "a previous version" + * has ended. + * + * Context: The CPR must be clocked before calling this function! + * + * Return: Zero for success or negative number on errors. + */ +static int cpr_configure(struct cpr_thread *thread) +{ + struct cpr_drv *drv = thread->drv; + const struct cpr_desc *desc = drv->desc; + const struct cpr_thread_desc *tdesc = thread->desc; + u32 val; + int i; + + /* Disable interrupt and CPR */ + cpr_irq_set(thread, 0); + cpr_write(thread, CPR3_REG_CPR_CTL, 0); + + /* Init and save gcnt */ + drv->gcnt = drv->ref_clk_khz * desc->gcnt_us; + do_div(drv->gcnt, 1000); + + /* Program the delay count for the timer */ + val = drv->ref_clk_khz * desc->timer_delay_us; + do_div(val, 1000); + if (desc->cpr_type == CTRL_TYPE_CPR3) { + cpr_write(thread, CPR3_REG_CPR_TIMER_MID_CONT, val); + + val = drv->ref_clk_khz * desc->timer_updn_delay_us; + do_div(val, 1000); + cpr_write(thread, CPR3_REG_CPR_TIMER_UP_DN_CONT, val); + } else { + cpr_write(thread, CPR3_REG_CPR_TIMER_AUTO_CONT, val); + } + dev_dbg(drv->dev, "Timer count: %#0x (for %d us)\n", val, + desc->timer_delay_us); + + /* Program the control register */ + val = FIELD_PREP(CPR3_CPR_CTL_IDLE_CLOCKS_MASK, desc->idle_clocks) | + FIELD_PREP(CPR3_CPR_CTL_COUNT_MODE_MASK, desc->count_mode) | + FIELD_PREP(CPR3_CPR_CTL_COUNT_REPEAT_MASK, desc->count_repeat); + cpr_write(thread, CPR3_REG_CPR_CTL, val); + + /* Configure CPR default step quotients */ + val = FIELD_PREP(CPR3_CPR_STEP_QUOT_MIN_MASK, tdesc->step_quot_init_min) | + FIELD_PREP(CPR3_CPR_STEP_QUOT_MAX_MASK, tdesc->step_quot_init_max); + + cpr_write(thread, CPR3_REG_CPR_STEP_QUOT, val); + + /* + * Configure the CPR sensor ownership always on thread 0 + * TODO: SDM845 has different ownership for sensors!! + */ + for (i = tdesc->sensor_range_start; i < tdesc->sensor_range_end; i++) + cpr_write(thread, CPR3_REG_SENSOR_OWNER(i), 0); + + /* Program Consecutive Up & Down */ + val = FIELD_PREP(CPR3_THRESH_CONS_DOWN_MASK, desc->timer_cons_down) | + FIELD_PREP(CPR3_THRESH_CONS_UP_MASK, desc->timer_cons_up) | + FIELD_PREP(CPR3_THRESH_DOWN_THRESH_MASK, desc->down_threshold) | + FIELD_PREP(CPR3_THRESH_UP_THRESH_MASK, desc->up_threshold); + cpr_write(thread, CPR3_REG_THRESH(tdesc->hw_tid), val); + + /* Mask all ring oscillators for all threads initially */ + cpr_write(thread, CPR3_REG_RO_MASK(tdesc->hw_tid), CPR3_RO_MASK); + + /* HW Closed-loop control */ + if (desc->cpr_type == CTRL_TYPE_CPR3) { + cpr_write(thread, CPR3_REG_HW_CLOSED_LOOP_DISABLED, + !desc->hw_closed_loop_en); + } else { + cpr_masked_write(thread, CPR4_REG_MARGIN_ADJ_CTL, + CPR4_MARGIN_ADJ_HW_CLOSED_LOOP_EN, + desc->hw_closed_loop_en ? + CPR4_MARGIN_ADJ_HW_CLOSED_LOOP_EN : 0); + } + + /* Additional configuration for CPR4 and beyond */ + if (desc->cpr_type < CTRL_TYPE_CPR4) + return 0; + + /* Disable threads initially only on non-hardened CPR4 */ + if (desc->cpr_type == CTRL_TYPE_CPR4) + cpr_masked_write(thread, CPR4_REG_CPR_MASK_THREAD(1), + CPR4_CPR_MASK_THREAD_DISABLE_THREAD | + CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK, + CPR4_CPR_MASK_THREAD_DISABLE_THREAD | + CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK); + + if (tdesc->hw_tid > 0) + cpr_masked_write(thread, CPR4_REG_MISC, + CPR4_MISC_RESET_STEP_QUOT_LOOP_EN | + CPR4_MISC_THREAD_HAS_ALWAYS_VOTE_EN, + CPR4_MISC_RESET_STEP_QUOT_LOOP_EN | + CPR4_MISC_THREAD_HAS_ALWAYS_VOTE_EN); + + val = drv->vreg_step; + do_div(val, 1000); + cpr_masked_write(thread, CPR4_REG_MARGIN_ADJ_CTL, + CPR4_MARGIN_ADJ_PMIC_STEP_SIZE_MASK, + val << CPR4_MARGIN_ADJ_PMIC_STEP_SIZE_SHIFT); + + cpr_masked_write(thread, CPR4_REG_SAW_ERROR_STEP_LIMIT, + CPR4_SAW_ERROR_STEP_LIMIT_DN_MASK, + desc->vreg_step_down_limit << + CPR4_SAW_ERROR_STEP_LIMIT_DN_SHIFT); + + cpr_masked_write(thread, CPR4_REG_SAW_ERROR_STEP_LIMIT, + CPR4_SAW_ERROR_STEP_LIMIT_UP_MASK, + desc->vreg_step_up_limit << + CPR4_SAW_ERROR_STEP_LIMIT_UP_SHIFT); + + cpr_masked_write(thread, CPR4_REG_MARGIN_ADJ_CTL, + CPR4_MARGIN_ADJ_PER_RO_KV_MARGIN_EN, + CPR4_MARGIN_ADJ_PER_RO_KV_MARGIN_EN); + + if (tdesc->hw_tid > 0) + cpr_masked_write(thread, CPR4_REG_CPR_TIMER_CLAMP, + CPR4_CPR_TIMER_CLAMP_THREAD_AGGREGATION_EN, + CPR4_CPR_TIMER_CLAMP_THREAD_AGGREGATION_EN); + + /* Settling timer to account for one VDD supply step */ + if (desc->vdd_settle_time_us > 0) { + u32 m = CPR4_MARGIN_TEMP_CORE_TIMERS_SETTLE_VOLTAGE_COUNT_MASK; + u32 s = CPR4_MARGIN_TEMP_CORE_TIMERS_SETTLE_VOLTAGE_COUNT_SHFT; + + cpr_masked_write(thread, CPR4_REG_MARGIN_TEMP_CORE_TIMERS, + m, desc->vdd_settle_time_us << s); + } + + /* Additional configuration for CPR-hardened */ + if (desc->cpr_type < CTRL_TYPE_CPRH) + return 0; + + /* Settling timer to account for one corner-switch request */ + if (desc->corner_settle_time_us > 0) + cpr_masked_write(thread, drv->reg_ctl, + CPRH_CTL_MODE_SWITCH_DELAY_MASK, + desc->corner_settle_time_us << + CPRH_CTL_MODE_SWITCH_DELAY_SHIFT); + + /* Base voltage and multiplier values for CPRh internal calculations */ + cpr_masked_write(thread, drv->reg_ctl, + CPRH_CTL_BASE_VOLTAGE_MASK, + (DIV_ROUND_UP(desc->cpr_base_voltage, + drv->vreg_step) << + CPRH_CTL_BASE_VOLTAGE_SHIFT)); + + cpr_masked_write(thread, drv->reg_ctl, + CPRH_CTL_VOLTAGE_MULTIPLIER_MASK, + DIV_ROUND_UP(drv->vreg_step, 1000) << + CPRH_CTL_VOLTAGE_MULTIPLIER_SHIFT); + + return 0; +} + +static int cprh_dummy_set_performance_state(struct generic_pm_domain *domain, + unsigned int state) +{ + return 0; +} + +static int cpr_set_performance_state(struct generic_pm_domain *domain, + unsigned int state) +{ + struct cpr_thread *thread = container_of(domain, struct cpr_thread, pd); + struct cpr_drv *drv = thread->drv; + struct corner *corner, *end; + int ret = 0; + + mutex_lock(&drv->lock); + + dev_dbg(drv->dev, "setting perf state: %u (prev state: %u thread: %u)\n", + state, cpr_get_cur_perf_state(thread), thread->id); + + /* + * Determine new corner we're going to. + * Remove one since lowest performance state is 1. + */ + corner = thread->corners + state - 1; + end = &thread->corners[thread->num_corners - 1]; + if (corner > end || corner < thread->corners) { + ret = -EINVAL; + goto unlock; + } + + cpr_ctl_disable(thread); + + cpr_irq_clr(thread); + if (thread->corner != corner) + cpr_corner_restore(thread, corner); + + ret = cpr_commit_state(thread); + if (ret) + goto unlock; + + cpr_ctl_enable(thread); +unlock: + mutex_unlock(&drv->lock); + + dev_dbg(drv->dev, "set perf state %u on thread %u\n", state, thread->id); + + return ret; +} + +/** + * cpr3_adjust_quot - Adjust the closed-loop quotients + * @ring_osc_factor: Ring oscillator adjustment factor + * @volt_closed_loop: Closed-loop voltage adjustment factor + * + * Calculates the quotient adjustment factor based on closed-loop + * quotients and ring oscillator factor. + * + * Return: Adjusted quotient + */ +static int cpr3_adjust_quot(int ring_osc_factor, int volt_closed_loop) +{ + s64 temp; + + if (ring_osc_factor == 0 || volt_closed_loop == 0) + return 0; + + temp = (s64)(ring_osc_factor * volt_closed_loop); + return (int)div_s64(temp, 1000000); +} + +/** + * cpr_fuse_corner_init() - Calculate fuse corner table + * @thread: Structure holding CPR thread-specific parameters + * + * This function populates the fuse corners table by reading the + * values from the fuses, eventually adjusting them with a fixed + * per-corner offset and doing basic checks about them being + * supported by the regulator that is assigned to this CPR - if + * it is available (on CPR-Hardened, there is no usable vreg, as + * that is protected by the hypervisor). + * + * Return: Zero for success, negative number on error + */ +static int cpr_fuse_corner_init(struct cpr_thread *thread) +{ + struct cpr_drv *drv = thread->drv; + const struct cpr_thread_desc *desc = thread->desc; + const struct cpr_fuse *cpr_fuse = thread->cpr_fuses; + struct fuse_corner_data *fdata; + struct fuse_corner *fuse, *prev_fuse, *end; + int i, ret; + + /* Populate fuse_corner members */ + fuse = thread->fuse_corners; + prev_fuse = &fuse[0]; + end = &fuse[desc->num_fuse_corners - 1]; + fdata = desc->fuse_corner_data; + + for (i = 0; fuse <= end; fuse++, cpr_fuse++, i++, fdata++) { + int sf_idx = desc->ro_scaling_factor_common ? 0 : i; + int factor = desc->ro_scaling_factor[sf_idx][fuse->ring_osc_idx]; + + ret = cpr_populate_fuse_common(drv->dev, fdata, cpr_fuse, + fuse, drv->vreg_step, + desc->init_voltage_width, + desc->init_voltage_step); + if (ret) + return ret; + + /* + * Adjust the fuse quot with per-fuse-corner closed-loop + * voltage adjustment parameters. + */ + fuse->quot += cpr3_adjust_quot(factor, fdata->volt_cloop_adjust); + + /* CPRh: no regulator access... */ + if (drv->desc->cpr_type == CTRL_TYPE_CPRH) + goto skip_pvs_restrict; + + /* Re-check if corner voltage range is supported by regulator */ + ret = cpr_check_vreg_constraints(drv->dev, drv->vreg, fuse); + if (ret) + return ret; + +skip_pvs_restrict: + if (fuse->uV < prev_fuse->uV) + fuse->uV = prev_fuse->uV; + prev_fuse = fuse; + dev_dbg(drv->dev, "fuse corner %d: [%d %d %d] RO%u quot %d\n", + i, fuse->min_uV, fuse->uV, fuse->max_uV, + fuse->ring_osc_idx, fuse->quot); + + /* Check if constraints are valid */ + if (fuse->uV < fuse->min_uV || fuse->uV > fuse->max_uV) { + dev_err(drv->dev, "fuse corner %d: Bad voltage range.\n", i); + return -EINVAL; + } + } + + return 0; +} + +static void cpr3_restrict_corner(struct corner *corner, int threshold, + int hysteresis, int step) +{ + if (threshold > corner->min_uV && threshold <= corner->max_uV) { + if (corner->uV >= threshold) { + corner->min_uV = max(corner->min_uV, + threshold - hysteresis); + if (corner->min_uV > corner->uV) + corner->uV = corner->min_uV; + } else { + corner->max_uV = threshold; + corner->max_uV -= step; + } + } +} + +/* + * cprh_corner_adjust_opps() - Set voltage on each CPU OPP table entry + * + * On CPR-Hardened, the voltage level is controlled internally through + * the OSM hardware: in order to initialize the latter, we have to + * communicate the voltage to its driver, so that it will be able to + * write the right parameters (as they have to be set both on the CPRh + * and on the OSM) on it. + * This function is called only for CPRh. + * + * Return: Zero for success, negative number for error. + */ +static int cprh_corner_adjust_opps(struct cpr_thread *thread) +{ + struct corner *corner = thread->corners; + struct cpr_drv *drv = thread->drv; + int i, ret; + + for (i = 0; i < thread->num_corners; i++) { + ret = dev_pm_opp_adjust_voltage(thread->attached_cpu_dev, + corner[i].freq, + corner[i].uV, + corner[i].min_uV, + corner[i].max_uV); + if (ret) + break; + + dev_dbg(drv->dev, "OPP voltage adjusted for %llu Hz, %d uV\n", + corner[i].freq, corner[i].uV); + } + + /* If we couldn't adjust voltage for all corners, something went wrong */ + if (i < thread->num_corners) + return -EINVAL; + + return ret; +} + +/** + * cpr3_corner_init() - Calculate and set-up corners for the CPR HW + * @thread: Structure holding CPR thread-specific parameters + * + * This function calculates all the corner parameters by comparing + * and interpolating the values read from the various set-points + * read from the fuses (also called "fuse corners") to generate and + * program to the CPR a lookup table that describes each voltage + * step, mapped to a performance level (or corner number). + * + * It also programs other essential parameters on the CPR and - if + * we are dealing with CPR-Hardened, it will also enable the internal + * interface between the Operating State Manager (OSM) and the CPRh + * in order to achieve CPU DVFS. + * + * Return: Zero for success, negative number on error + */ +static int cpr3_corner_init(struct cpr_thread *thread) +{ + struct cpr_drv *drv = thread->drv; + const struct cpr_desc *desc = drv->desc; + const struct cpr_thread_desc *tdesc = thread->desc; + const struct cpr_fuse *fuses = thread->cpr_fuses; + int i, ret, total_corners, extra_corners, level, scaling = 0; + unsigned int fnum, fc; + const char *quot_offset; + const struct fuse_corner_data *fdata; + struct fuse_corner *fuse, *prev_fuse; + struct corner *corner, *prev_corner, *end; + struct corner_data *cdata; + struct dev_pm_opp *opp; + u32 ring_osc_mask = CPR3_RO_MASK, min_quotient = U32_MAX; + u64 freq; + + corner = thread->corners; + prev_corner = &thread->corners[0]; + end = &corner[thread->num_corners - 1]; + + cdata = devm_kcalloc(drv->dev, thread->num_corners + drv->extra_corners, + sizeof(struct corner_data), GFP_KERNEL); + if (!cdata) + return -ENOMEM; + + for (level = 1; level <= thread->num_corners; level++) { + opp = dev_pm_opp_find_level_exact(&thread->pd.dev, level); + if (IS_ERR(opp)) + return -EINVAL; + + fc = cpr_get_fuse_corner(opp, thread->id); + if (!fc) { + dev_pm_opp_put(opp); + return -EINVAL; + } + fnum = fc - 1; + + freq = cpr_get_opp_hz_for_req(opp, thread->attached_cpu_dev); + if (!freq) { + thread->num_corners = max(level - 1, 0); + end = &thread->corners[thread->num_corners - 1]; + break; + } + + ret = cpr_get_corner_post_vadj(opp, thread->id, + &cdata[level - 1].oloop_vadj, + &cdata[level - 1].cloop_vadj); + if (ret) { + dev_pm_opp_put(opp); + return ret; + } + + cdata[level - 1].fuse_corner = fnum; + cdata[level - 1].freq = freq; + + fuse = &thread->fuse_corners[fnum]; + dev_dbg(drv->dev, "freq: %llu level: %u fuse level: %u\n", + freq, dev_pm_opp_get_level(opp) - 1, fnum); + if (freq > fuse->max_freq) + fuse->max_freq = freq; + dev_pm_opp_put(opp); + + /* + * Make sure that the frequencies in the table are in ascending + * order, as this is critical for the algorithm to work. + */ + if (cdata[level - 2].freq > freq) { + dev_err(drv->dev, "Frequency table not in ascending order.\n"); + return -EINVAL; + } + } + + if (thread->num_corners < 2) { + dev_err(drv->dev, "need at least 2 OPPs to use CPR\n"); + return -EINVAL; + } + + /* + * Get the quotient adjustment scaling factor, according to: + * + * scaling = min(1000 * (QUOT(corner_N) - QUOT(corner_N-1)) + * / (freq(corner_N) - freq(corner_N-1)), max_factor) + * + * QUOT(corner_N): quotient read from fuse for fuse corner N + * QUOT(corner_N-1): quotient read from fuse for fuse corner (N - 1) + * freq(corner_N): max frequency in MHz supported by fuse corner N + * freq(corner_N-1): max frequency in MHz supported by fuse corner + * (N - 1) + * + * Then walk through the corners mapped to each fuse corner + * and calculate the quotient adjustment for each one using the + * following formula: + * + * quot_adjust = (freq_max - freq_corner) * scaling / 1000 + * + * freq_max: max frequency in MHz supported by the fuse corner + * freq_corner: frequency in MHz corresponding to the corner + * scaling: calculated from above equation + * + * + * + + + * | v | + * q | f c o | f c + * u | c l | c + * o | f t | f + * t | c a | c + * | c f g | c f + * | e | + * +--------------- +---------------- + * 0 1 2 3 4 5 6 0 1 2 3 4 5 6 + * corner corner + * + * c = corner + * f = fuse corner + * + */ + for (i = 0; corner <= end; corner++, i++) { + int ro_fac, sf_idx, vadj, prev_quot; + u64 freq_diff_mhz; + + fnum = cdata[i].fuse_corner; + fdata = &tdesc->fuse_corner_data[fnum]; + quot_offset = fuses[fnum].quotient_offset; + fuse = &thread->fuse_corners[fnum]; + ring_osc_mask &= (u16)(~BIT(fuse->ring_osc_idx)); + if (fnum) + prev_fuse = &thread->fuse_corners[fnum - 1]; + else + prev_fuse = NULL; + + corner->fuse_corner = fuse; + corner->freq = cdata[i].freq; + corner->uV = fuse->uV; + + if (prev_fuse) { + if (prev_fuse->ring_osc_idx == fuse->ring_osc_idx) + quot_offset = NULL; + + scaling = cpr_calculate_scaling(drv->dev, quot_offset, + fdata, corner); + if (scaling < 0) + return scaling; + + freq_diff_mhz = fuse->max_freq - corner->freq; + do_div(freq_diff_mhz, 1000000); /* now in MHz */ + + corner->quot_adjust = scaling * freq_diff_mhz; + do_div(corner->quot_adjust, 1000); + + /* Fine-tune QUOT (closed-loop) based on fixed values */ + sf_idx = tdesc->ro_scaling_factor_common ? 0 : fnum; + ro_fac = tdesc->ro_scaling_factor[sf_idx][fuse->ring_osc_idx]; + vadj = cdata[i].cloop_vadj; + corner->quot_adjust -= cpr3_adjust_quot(ro_fac, vadj); + dev_vdbg(drv->dev, "Quot fine-tuning to %d for post-vadj=%d\n", + corner->quot_adjust, vadj); + + /* + * Make sure that we scale (up) monotonically. + * P.S.: Fuse quots can never be descending. + */ + prev_quot = prev_corner->fuse_corner->quot; + prev_quot -= prev_corner->quot_adjust; + if (fuse->quot - corner->quot_adjust < prev_quot) { + int new_adj = prev_corner->fuse_corner->quot; + + new_adj -= fuse->quot; + dev_vdbg(drv->dev, "Monotonic increase forced: %d->%d\n", + corner->quot_adjust, new_adj); + corner->quot_adjust = new_adj; + } + + corner->uV = cpr_interpolate(corner, + drv->vreg_step, fdata); + } + /* Negative fuse quotients are nonsense. */ + if (fuse->quot < corner->quot_adjust) + return -EINVAL; + + min_quotient = min(min_quotient, + (u32)(fuse->quot - corner->quot_adjust)); + + /* Fine-tune voltages (open-loop) based on fixed values */ + corner->uV += cdata[i].oloop_vadj; + dev_dbg(drv->dev, "Voltage fine-tuning to %d for post-vadj=%d\n", + corner->uV, cdata[i].oloop_vadj); + + corner->max_uV = fuse->max_uV; + corner->min_uV = fuse->min_uV; + corner->uV = clamp(corner->uV, corner->min_uV, corner->max_uV); + dev_vdbg(drv->dev, "Clamped after interpolation: [%d %d %d]\n", + corner->min_uV, corner->uV, corner->max_uV); + + /* Make sure that we scale monotonically here, too. */ + if (corner->uV < prev_corner->uV) + corner->uV = prev_corner->uV; + + corner->last_uV = corner->uV; + + /* Reduce the ceiling voltage if needed */ + if (desc->reduce_to_corner_uV && corner->uV < corner->max_uV) + corner->max_uV = corner->uV; + else if (desc->reduce_to_fuse_uV && fuse->uV < corner->max_uV) + corner->max_uV = max(corner->min_uV, fuse->uV); + + corner->min_uV = max(corner->max_uV - fdata->range_uV, + corner->min_uV); + + /* + * Adjust per-corner floor and ceiling voltages so that + * they do not overlap the memory Array Power Mux (APM) + * nor the Memory Accelerator (MEM-ACC) threshold voltages. + */ + if (desc->apm_threshold) + cpr3_restrict_corner(corner, desc->apm_threshold, + desc->apm_hysteresis, + drv->vreg_step); + if (desc->mem_acc_threshold) + cpr3_restrict_corner(corner, desc->mem_acc_threshold, + 0, drv->vreg_step); + + prev_corner = corner; + dev_dbg(drv->dev, "corner %d: [%d %d %d] scaling %d quot %d\n", i, + corner->min_uV, corner->uV, corner->max_uV, scaling, + fuse->quot - corner->quot_adjust); + } + + /* Additional setup for CPRh only */ + if (desc->cpr_type < CTRL_TYPE_CPRH) + return 0; + + /* If the OPPs can't be adjusted, programming the CPRh is useless */ + ret = cprh_corner_adjust_opps(thread); + if (ret) { + dev_err(drv->dev, "Cannot adjust CPU OPP voltages: %d\n", ret); + return ret; + } + + total_corners = thread->num_corners; + extra_corners = drv->extra_corners; + + /* If the APM extra corner exists, add it now. */ + if (desc->apm_crossover && desc->apm_threshold && extra_corners) { + /* Program the APM crossover corner on the CPR-Hardened */ + thread->corners[total_corners].uV = desc->apm_crossover; + thread->corners[total_corners].min_uV = desc->apm_crossover; + thread->corners[total_corners].max_uV = desc->apm_crossover; + thread->corners[total_corners].is_open_loop = true; + + /* + * We have calculated the APM parameters for this clock plan: + * make the APM *threshold* available to external callers. + * The crossover is used only internally in the CPR. + */ + thread->ext_data.apm_threshold_uV = desc->apm_threshold; + + dev_dbg(drv->dev, "corner %d (APM): [%d %d %d] Open-Loop\n", + total_corners, desc->apm_crossover, + desc->apm_crossover, desc->apm_crossover); + + total_corners++; + extra_corners--; + } + + if (desc->mem_acc_threshold && extra_corners) { + /* Program the Memory Accelerator threshold corner to CPRh */ + thread->corners[total_corners].uV = desc->mem_acc_threshold; + thread->corners[total_corners].min_uV = desc->mem_acc_threshold; + thread->corners[total_corners].max_uV = desc->mem_acc_threshold; + thread->corners[total_corners].is_open_loop = true; + + /* + * We have calculated a mem-acc threshold for this clock plan: + * make it available to external callers. + */ + thread->ext_data.mem_acc_threshold_uV = desc->mem_acc_threshold; + + dev_dbg(drv->dev, "corner %d (MEMACC): [%d %d %d] Open-Loop\n", + total_corners, desc->mem_acc_threshold, + desc->mem_acc_threshold, desc->mem_acc_threshold); + + total_corners++; + extra_corners--; + } + + /* + * If there are any extra corners left, it means that even though we + * expect to fill in both APM and MEM-ACC crossovers, one couldn't + * satisfy requirements, which means that the specified parameters + * are wrong: in this case, inform the user and bail out, otherwise + * if we go on writing the (invalid) table to the CPR-Hardened, the + * hardware (in this case, the CPU) will surely freeze and crash. + */ + if (unlikely(extra_corners)) { + dev_err(drv->dev, "APM/MEM-ACC corners: bad parameters.\n"); + return -EINVAL; + } + /* Reassign extra_corners, as we have to exclude delta_quot for them */ + extra_corners = drv->extra_corners; + + /* Disable the interface between OSM and CPRh */ + cpr_masked_write(thread, drv->reg_ctl, + CPRH_CTL_OSM_ENABLED, 0); + + /* Program the GCNT before unmasking ring oscillator(s) */ + for (i = 0; i < CPR3_RO_COUNT; i++) { + if (!(ring_osc_mask & BIT(i))) { + cpr_write(thread, CPR3_REG_GCNT(i), drv->gcnt); + dev_vdbg(drv->dev, "RO%d gcnt=%d\n", i, drv->gcnt); + } + } + + /* + * Unmask the ring oscillator(s) that we're going to use: it seems + * to be mandatory to do this *before* sending the rest of the + * CPRhardened specific configuration. + */ + dev_dbg(drv->dev, "Unmasking ring oscillators with mask 0x%x\n", ring_osc_mask); + cpr_write(thread, CPR3_REG_RO_MASK(tdesc->hw_tid), ring_osc_mask); + + /* Setup minimum quotients for ring oscillators */ + for (i = 0; i < CPR3_RO_COUNT; i++) { + u32 tgt_quot_reg = CPR3_REG_TARGET_QUOT(tdesc->hw_tid, i); + u32 tgt_quot_val = 0; + + if (!(ring_osc_mask & BIT(i))) + tgt_quot_val = min_quotient; + + cpr_write(thread, tgt_quot_reg, tgt_quot_val); + dev_vdbg(drv->dev, "Programmed min quotient %u for Ring Oscillator %d\n", + tgt_quot_val, tgt_quot_reg); + } + + for (i = 0; i < total_corners; i++) { + int volt_oloop_steps, volt_floor_steps, delta_quot_steps; + int ring_osc; + u32 val; + + fnum = cdata[i].fuse_corner; + fuse = &thread->fuse_corners[fnum]; + + val = thread->corners[i].uV - desc->cpr_base_voltage; + volt_oloop_steps = DIV_ROUND_UP(val, drv->vreg_step); + + val = thread->corners[i].min_uV - desc->cpr_base_voltage; + volt_floor_steps = DIV_ROUND_UP(val, drv->vreg_step); + + /* + * If we are accessing corners that are not used as + * an active DCVS set-point, then always select RO 0 + * and zero out the delta quotient. + */ + if (i >= thread->num_corners) { + ring_osc = 0; + delta_quot_steps = 0; + } else { + ring_osc = fuse->ring_osc_idx; + val = fuse->quot - thread->corners[i].quot_adjust; + val -= min_quotient; + delta_quot_steps = DIV_ROUND_UP(val, + CPRH_DELTA_QUOT_STEP_FACTOR); + } + + if (volt_oloop_steps > CPRH_CORNER_INIT_VOLTAGE_MAX_VALUE || + volt_floor_steps > CPRH_CORNER_FLOOR_VOLTAGE_MAX_VALUE || + delta_quot_steps > CPRH_CORNER_QUOT_DELTA_MAX_VALUE) { + dev_err(drv->dev, "Invalid cfg: oloop=%d, floor=%d, delta=%d\n", + volt_oloop_steps, volt_floor_steps, + delta_quot_steps); + return -EINVAL; + } + /* Green light: Go, Go, Go! */ + + /* Set number of open-loop steps */ + val = FIELD_PREP(CPRH_CORNER_INIT_VOLTAGE_MASK, volt_oloop_steps); + + /* Set number of floor voltage steps */ + val |= FIELD_PREP(CPRH_CORNER_FLOOR_VOLTAGE_MASK, volt_floor_steps); + + /* Set number of target quotient delta steps */ + val |= FIELD_PREP(CPRH_CORNER_QUOT_DELTA_MASK, delta_quot_steps); + + /* Select ring oscillator for this corner */ + val |= FIELD_PREP(CPRH_CORNER_RO_SEL_MASK, ring_osc); + + /* Open loop corner is usually APM/ACC crossover */ + if (thread->corners[i].is_open_loop) { + dev_dbg(drv->dev, "Disabling Closed-Loop on corner %d\n", i); + val |= CPRH_CORNER_CPR_CL_DISABLE; + } + cpr_write(thread, CPRH_REG_CORNER(drv, tdesc->hw_tid, i), val); + + dev_dbg(drv->dev, "steps [%d]: open-loop %d, floor %d, delta_quot %d\n", + i, volt_oloop_steps, volt_floor_steps, + delta_quot_steps); + } + + /* YAY! Setup is done! Enable the internal loop to start CPR. */ + cpr_masked_write(thread, CPR3_REG_CPR_CTL, + CPR3_CPR_CTL_LOOP_EN_MASK, + CPR3_CPR_CTL_LOOP_EN_MASK); + + /* + * All the writes are going through before enabling internal + * communication between the OSM and the CPRh controllers + * because we are never using relaxed accessors, but should + * we use them, it would be critical to issue a barrier here, + * otherwise there is a high risk of hardware lockups due to + * under-voltage for the selected CPU clock. + * + * Please note that the CPR-hardened gets set-up in Linux but + * then gets actually used in firmware (and only by the OSM); + * after handing it off we will have no more control on it. + */ + + /* Enable the interface between OSM and CPRh */ + cpr_masked_write(thread, drv->reg_ctl, + CPRH_CTL_OSM_ENABLED, + CPRH_CTL_OSM_ENABLED); + + /* On success, free cdata manually */ + devm_kfree(drv->dev, cdata); + return 0; +} + +/** + * cpr3_init_parameters() - Initialize CPR global parameters + * @drv: Main driver structure + * + * Initial "integrity" checks and setup for the thread-independent parameters. + * + * Return: Zero for success, negative number on error + */ +static int cpr3_init_parameters(struct cpr_drv *drv) +{ + const struct cpr_desc *desc = drv->desc; + struct clk *clk; + + clk = devm_clk_get(drv->dev, NULL); + if (IS_ERR(clk)) { + dev_err(drv->dev, "Couldn't get the reference clock: %ld\n", PTR_ERR(clk)); + return PTR_ERR(clk); + } + + drv->ref_clk_khz = clk_get_rate(clk); + do_div(drv->ref_clk_khz, 1000); + + /* On CPRh this clock is not always-on... */ + if (desc->cpr_type == CTRL_TYPE_CPRH) + clk_prepare_enable(clk); + else + devm_clk_put(drv->dev, clk); + + if (desc->timer_cons_up > CPR3_THRESH_CONS_UP_MASK || + desc->timer_cons_down > CPR3_THRESH_CONS_DOWN_MASK || + desc->up_threshold > CPR3_THRESH_UP_THRESH_MASK || + desc->down_threshold > CPR3_THRESH_DOWN_THRESH_MASK || + desc->idle_clocks > CPR3_CPR_CTL_IDLE_CLOCKS_MASK || + desc->count_mode > CPR3_CPR_CTL_COUNT_MODE_MASK || + desc->count_repeat > CPR3_CPR_CTL_COUNT_REPEAT_MASK) + return -EINVAL; + + /* + * Read the CPR version register only from CPR3 onwards: + * this is needed to get the additional register offsets. + * + * Note: When threaded, even if multi-controller, there + * is no chance to have different versions at the + * same time in the same domain, so it is safe to + * check this only on the first controller/thread. + */ + drv->cpr_hw_rev = cpr_read(&drv->threads[0], + CPR3_REG_CPR_VERSION); + dev_dbg(drv->dev, "CPR hardware revision: 0x%x\n", drv->cpr_hw_rev); + + if (drv->cpr_hw_rev >= CPRH_CPR_VERSION_4P5) { + drv->reg_corner = 0x3500; + drv->reg_corner_tid = 0xa0; + drv->reg_ctl = 0x3a80; + drv->reg_status = 0x3a84; + } else { + drv->reg_corner = 0x3a00; + drv->reg_corner_tid = 0; + drv->reg_ctl = 0x3aa0; + drv->reg_status = 0x3aa4; + } + + dev_dbg(drv->dev, "up threshold = %u, down threshold = %u\n", + desc->up_threshold, desc->down_threshold); + + return 0; +} + +/** + * cpr3_find_initial_corner() - Finds boot-up p-state and enables CPR + * @thread: Structure holding CPR thread-specific parameters + * + * Differently from CPRv1, from CPRv3 onwards when we successfully find + * the target boot-up performance state, we must refresh the HW + * immediately to guarantee system stability and to avoid overheating + * during the boot process, thing that would more likely happen without + * this driver doing its job. + * + * Return: Zero for success, negative number on error + */ +static int cpr3_find_initial_corner(struct cpr_thread *thread) +{ + struct cpr_drv *drv = thread->drv; + struct corner *corner; + int uV, idx; + + idx = cpr_find_initial_corner(drv->dev, thread->cpu_clk, + thread->corners, + thread->num_corners); + if (idx < 0) + return idx; + + cpr_ctl_disable(thread); + + corner = &thread->corners[idx]; + cpr_corner_restore(thread, corner); + + uV = regulator_get_voltage(drv->vreg); + uV = clamp(uV, corner->min_uV, corner->max_uV); + + corner->last_uV = uV; + if (!drv->last_uV) + drv->last_uV = uV; + + cpr_commit_state(thread); + thread->enabled = true; + cpr_switch(drv); + + return 0; +} + +static const int msm8998_gold_scaling_factor[][CPR3_RO_COUNT] = { + /* Fuse Corner 0 */ + { + 2857, 3057, 2828, 2952, 2699, 2798, 2446, 2631, + 2629, 2578, 2244, 3344, 3289, 3137, 3164, 2655 + }, + /* Fuse Corner 1 */ + { + 2857, 3057, 2828, 2952, 2699, 2798, 2446, 2631, + 2629, 2578, 2244, 3344, 3289, 3137, 3164, 2655 + }, + /* Fuse Corner 2 */ + { + 2603, 2755, 2676, 2777, 2573, 2685, 2465, 2610, + 2312, 2423, 2243, 3104, 3022, 3036, 2740, 2303 + }, + /* Fuse Corner 3 */ + { + 1901, 2016, 2096, 2228, 2034, 2161, 2077, 2188, + 1565, 1870, 1925, 2235, 2205, 2413, 1762, 1478 + } +}; + +static const int msm8998_silver_scaling_factor[][CPR3_RO_COUNT] = { + /* Fuse Corner 0 */ + { + 2595, 2794, 2577, 2762, 2471, 2674, 2199, 2553, + 3189, 3255, 3192, 2962, 3054, 2982, 2042, 2945 + }, + /* Fuse Corner 1 */ + { + 2595, 2794, 2577, 2762, 2471, 2674, 2199, 2553, + 3189, 3255, 3192, 2962, 3054, 2982, 2042, 2945 + }, + /* Fuse Corner 2 */ + { + 2391, 2550, 2483, 2638, 2382, 2564, 2259, 2555, + 2766, 3041, 2988, 2935, 2873, 2688, 2013, 2784 + }, + /* Fuse Corner 3 */ + { + 2066, 2153, 2300, 2434, 2220, 2386, 2288, 2465, + 2028, 2511, 2487, 2734, 2554, 2117, 1892, 2377 + } +}; + +static const struct cpr_thread_desc msm8998_thread_gold = { + .controller_id = 1, + .hw_tid = 0, + .ro_scaling_factor = msm8998_gold_scaling_factor, + .sensor_range_start = 0, + .sensor_range_end = 9, + .init_voltage_step = 10000, + .init_voltage_width = 6, + .step_quot_init_min = 9, + .step_quot_init_max = 14, + .num_fuse_corners = 4, + .fuse_corner_data = (struct fuse_corner_data[]){ + /* fuse corner 0 */ + { + .ref_uV = 756000, + .max_uV = 828000, + .min_uV = 568000, + .range_uV = 32000, + .volt_cloop_adjust = 0, + .volt_oloop_adjust = 8000, + .max_volt_scale = 4, + .max_quot_scale = 10, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + /* fuse corner 1 */ + { + .ref_uV = 756000, + .max_uV = 900000, + .min_uV = 624000, + .range_uV = 32000, + .volt_cloop_adjust = 0, + .volt_oloop_adjust = 0, + .max_volt_scale = 320, + .max_quot_scale = 350, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + /* fuse corner 2 */ + { + .ref_uV = 828000, + .max_uV = 952000, + .min_uV = 632000, + .range_uV = 32000, + .volt_cloop_adjust = 12000, + .volt_oloop_adjust = 12000, + .max_volt_scale = 620, + .max_quot_scale = 750, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + /* fuse corner 3 */ + { + .ref_uV = 1056000, + .max_uV = 1136000, + .min_uV = 772000, + .range_uV = 40000, + .volt_cloop_adjust = 50000, + .volt_oloop_adjust = 52000, + .max_volt_scale = 580, + .max_quot_scale = 1040, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + }, +}; + +static const struct cpr_thread_desc msm8998_thread_silver = { + .controller_id = 0, + .hw_tid = 0, + .ro_scaling_factor = msm8998_silver_scaling_factor, + .sensor_range_start = 0, + .sensor_range_end = 6, + .init_voltage_step = 10000, + .init_voltage_width = 6, + .step_quot_init_min = 11, + .step_quot_init_max = 12, + .num_fuse_corners = 4, + .fuse_corner_data = (struct fuse_corner_data[]){ + /* fuse corner 0 */ + { + .ref_uV = 688000, + .max_uV = 828000, + .min_uV = 568000, + .range_uV = 32000, + .volt_cloop_adjust = 20000, + .volt_oloop_adjust = 40000, + .max_volt_scale = 4, + .max_quot_scale = 10, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + /* fuse corner 1 */ + { + .ref_uV = 756000, + .max_uV = 900000, + .min_uV = 632000, + .range_uV = 32000, + .volt_cloop_adjust = 26000, + .volt_oloop_adjust = 24000, + .max_volt_scale = 500, + .max_quot_scale = 800, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + /* fuse corner 2 */ + { + .ref_uV = 828000, + .max_uV = 952000, + .min_uV = 664000, + .range_uV = 32000, + .volt_cloop_adjust = 12000, + .volt_oloop_adjust = 12000, + .max_volt_scale = 280, + .max_quot_scale = 650, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + + }, + /* fuse corner 3 */ + { + .ref_uV = 1056000, + .max_uV = 1056000, + .min_uV = 772000, + .range_uV = 40000, + .volt_cloop_adjust = 30000, + .volt_oloop_adjust = 30000, + .max_volt_scale = 430, + .max_quot_scale = 800, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + }, +}; + +static const struct cpr_desc msm8998_cpr_desc = { + .cpr_type = CTRL_TYPE_CPRH, + .num_threads = 2, + .mem_acc_threshold = 852000, + .apm_threshold = 800000, + .apm_crossover = 880000, + .apm_hysteresis = 0, + .cpr_base_voltage = 352000, + .cpr_max_voltage = 1200000, + .timer_delay_us = 5000, + .timer_cons_up = 0, + .timer_cons_down = 2, + .up_threshold = 2, + .down_threshold = 2, + .idle_clocks = 15, + .count_mode = CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MIN, + .count_repeat = 14, + .gcnt_us = 1, + .vreg_step_fixed = 4000, + .vreg_step_up_limit = 1, + .vreg_step_down_limit = 1, + .vdd_settle_time_us = 34, + .corner_settle_time_us = 6, + .reduce_to_corner_uV = true, + .hw_closed_loop_en = true, + .threads = (const struct cpr_thread_desc *[]) { + &msm8998_thread_silver, + &msm8998_thread_gold, + }, +}; + +static const struct cpr_acc_desc msm8998_cpr_acc_desc = { + .cpr_desc = &msm8998_cpr_desc, +}; + +static const int sdm630_gold_scaling_factor[][CPR3_RO_COUNT] = { + /* Same RO factors for all fuse corners */ + { + 4040, 3230, 0, 2210, 2560, 2450, 2230, 2220, + 2410, 2300, 2560, 2470, 1600, 3120, 2620, 2280 + } +}; + +static const int sdm630_silver_scaling_factor[][CPR3_RO_COUNT] = { + /* Same RO factors for all fuse corners */ + { + 3600, 3600, 3830, 2430, 2520, 2700, 1790, 1760, + 1970, 1880, 2110, 2010, 2510, 4900, 4370, 4780, + } +}; + +static const struct cpr_thread_desc sdm630_thread_gold = { + .controller_id = 0, + .hw_tid = 0, + .ro_scaling_factor = sdm630_gold_scaling_factor, + .ro_scaling_factor_common = true, + .sensor_range_start = 0, + .sensor_range_end = 6, + .init_voltage_step = 10000, + .init_voltage_width = 6, + .step_quot_init_min = 12, + .step_quot_init_max = 14, + .num_fuse_corners = 5, + .fuse_corner_data = (struct fuse_corner_data[]){ + /* fuse corner 0 */ + { + .ref_uV = 644000, + .max_uV = 724000, + .min_uV = 588000, + .range_uV = 40000, + .volt_cloop_adjust = -30000, + .volt_oloop_adjust = 15000, + .max_volt_scale = 10, + .max_quot_scale = 300, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + /* fuse corner 1 */ + { + .ref_uV = 788000, + .max_uV = 788000, + .min_uV = 652000, + .range_uV = 40000, + .volt_cloop_adjust = -30000, + .volt_oloop_adjust = 5000, + .max_volt_scale = 320, + .max_quot_scale = 275, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + /* fuse corner 2 */ + { + .ref_uV = 868000, + .max_uV = 868000, + .min_uV = 712000, + .range_uV = 40000, + .volt_cloop_adjust = -30000, + .volt_oloop_adjust = 5000, + .max_volt_scale = 350, + .max_quot_scale = 800, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + /* fuse corner 3 */ + { + .ref_uV = 988000, + .max_uV = 988000, + .min_uV = 784000, + .range_uV = 66000, + .volt_cloop_adjust = -30000, + .volt_oloop_adjust = 0, + .max_volt_scale = 868, + .max_quot_scale = 980, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + /* fuse corner 4 */ + { + .ref_uV = 1068000, + .max_uV = 1068000, + .min_uV = 844000, + .range_uV = 40000, + .volt_cloop_adjust = -30000, + .volt_oloop_adjust = 0, + .max_volt_scale = 868, + .max_quot_scale = 980, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + }, +}; + +static const struct cpr_thread_desc sdm630_thread_silver = { + .controller_id = 1, + .hw_tid = 0, + .ro_scaling_factor = sdm630_silver_scaling_factor, + .ro_scaling_factor_common = true, + .sensor_range_start = 0, + .sensor_range_end = 6, + .init_voltage_step = 10000, + .init_voltage_width = 6, + .step_quot_init_min = 12, + .step_quot_init_max = 14, + .num_fuse_corners = 3, + .fuse_corner_data = (struct fuse_corner_data[]){ + /* fuse corner 0 */ + { + .ref_uV = 644000, + .max_uV = 724000, + .min_uV = 588000, + .range_uV = 32000, + .volt_cloop_adjust = -30000, + .volt_oloop_adjust = 0, + .max_volt_scale = 10, + .max_quot_scale = 360, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + /* fuse corner 1 */ + { + .ref_uV = 788000, + .max_uV = 788000, + .min_uV = 652000, + .range_uV = 40000, + .volt_cloop_adjust = -30000, + .volt_oloop_adjust = 0, + .max_volt_scale = 500, + .max_quot_scale = 550, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + /* fuse corner 2 */ + { + .ref_uV = 1068000, + .max_uV = 1068000, + .min_uV = 800000, + .range_uV = 40000, + .volt_cloop_adjust = -30000, + .volt_oloop_adjust = 0, + .max_volt_scale = 2370, + .max_quot_scale = 550, + .quot_offset = 0, + .quot_scale = 1, + .quot_adjust = 0, + .quot_offset_scale = 5, + .quot_offset_adjust = 0, + }, + }, +}; + +static const struct cpr_desc sdm630_cpr_desc = { + .cpr_type = CTRL_TYPE_CPRH, + .num_threads = 2, + .apm_threshold = 872000, + .apm_crossover = 872000, + .apm_hysteresis = 20000, + .cpr_base_voltage = 400000, + .cpr_max_voltage = 1300000, + .timer_delay_us = 5000, + .timer_cons_up = 0, + .timer_cons_down = 2, + .up_threshold = 2, + .down_threshold = 2, + .idle_clocks = 15, + .count_mode = CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MIN, + .count_repeat = 14, + .gcnt_us = 1, + .vreg_step_fixed = 4000, + .vreg_step_up_limit = 1, + .vreg_step_down_limit = 1, + .vdd_settle_time_us = 34, + .corner_settle_time_us = 5, + .reduce_to_corner_uV = true, + .hw_closed_loop_en = true, + .threads = (const struct cpr_thread_desc *[]) { + &sdm630_thread_gold, + &sdm630_thread_silver, + }, +}; + +static const struct cpr_acc_desc sdm630_cpr_acc_desc = { + .cpr_desc = &sdm630_cpr_desc, +}; + +static unsigned int cpr_get_performance_state(struct generic_pm_domain *genpd, + struct dev_pm_opp *opp) +{ + return dev_pm_opp_get_level(opp); +} + +static int cpr_power_off(struct generic_pm_domain *domain) +{ + struct cpr_thread *thread = container_of(domain, struct cpr_thread, pd); + + return cpr_disable(thread); +} + +static int cpr_power_on(struct generic_pm_domain *domain) +{ + struct cpr_thread *thread = container_of(domain, struct cpr_thread, pd); + + return cpr_enable(thread); +} + +static void cpr_pd_detach_dev(struct generic_pm_domain *domain, + struct device *dev) +{ + struct cpr_thread *thread = container_of(domain, struct cpr_thread, pd); + struct cpr_drv *drv = thread->drv; + + mutex_lock(&drv->lock); + + dev_dbg(drv->dev, "detach callback for: %s\n", dev_name(dev)); + thread->attached_cpu_dev = NULL; + + mutex_unlock(&drv->lock); +} + +static int cpr_pd_attach_dev(struct generic_pm_domain *domain, + struct device *dev) +{ + struct cpr_thread *thread = container_of(domain, struct cpr_thread, pd); + struct cpr_drv *drv = thread->drv; + const struct acc_desc *acc_desc = drv->acc_desc; + bool cprh_opp_remove_table = false; + int ret = 0; + + mutex_lock(&drv->lock); + + dev_dbg(drv->dev, "attach callback for: %s\n", dev_name(dev)); + + /* + * This driver only supports scaling voltage for a CPU cluster + * where all CPUs in the cluster share a single regulator. + * Therefore, save the struct device pointer only for the first + * CPU device that gets attached. There is no need to do any + * additional initialization when further CPUs get attached. + * This is not an error condition. + */ + if (thread->attached_cpu_dev) + goto unlock; + + /* + * cpr_scale_voltage() requires the direction (if we are changing + * to a higher or lower OPP). The first time + * cpr_set_performance_state() is called, there is no previous + * performance state defined. Therefore, we call + * cpr_find_initial_corner() that gets the CPU clock frequency + * set by the bootloader, so that we can determine the direction + * the first time cpr_set_performance_state() is called. + */ + thread->cpu_clk = devm_clk_get(dev, NULL); + if (drv->desc->cpr_type < CTRL_TYPE_CPRH && IS_ERR(thread->cpu_clk)) { + ret = PTR_ERR(thread->cpu_clk); + if (ret != -EPROBE_DEFER) + dev_err(drv->dev, "could not get cpu clk: %d\n", ret); + goto unlock; + } + thread->attached_cpu_dev = dev; + + /* + * We are exporting the APM and MEM-ACC thresholds to the caller; + * while APM is necessary in the CPU CPR case, MEM-ACC may not be, + * depending on the SoC and on fuses. + * Initialize both to an invalid value, so that the caller can check + * if they got calculated or read from fuses in this driver. + */ + thread->ext_data.apm_threshold_uV = -1; + thread->ext_data.mem_acc_threshold_uV = -1; + dev_set_drvdata(thread->attached_cpu_dev, &thread->ext_data); + + dev_dbg(drv->dev, "using cpu clk from: %s\n", + dev_name(thread->attached_cpu_dev)); + + /* + * Everything related to (virtual) corners has to be initialized + * here, when attaching to the power domain, since we need to know + * the maximum frequency for each fuse corner, and this is only + * available after the cpufreq driver has attached to us. + * The reason for this is that we need to know the highest + * frequency associated with each fuse corner. + */ + ret = dev_pm_opp_get_opp_count(&thread->pd.dev); + if (ret < 0) { + dev_err(drv->dev, "could not get OPP count\n"); + thread->attached_cpu_dev = NULL; + goto unlock; + } + thread->num_corners = ret; + + thread->corners = devm_kcalloc(drv->dev, + thread->num_corners + + drv->extra_corners, + sizeof(*thread->corners), + GFP_KERNEL); + if (!thread->corners) { + ret = -ENOMEM; + goto unlock; + } + + /* + * If we are on CPR-Hardened we have to make sure that the attached + * device has a OPP table installed, as we're going to modify it here + * with our calculations based on qfprom values. + */ + if (drv->desc->cpr_type == CTRL_TYPE_CPRH) { + ret = dev_pm_opp_of_add_table(dev); + if (ret && ret != -EEXIST) { + dev_err(drv->dev, "Cannot add table: %d\n", ret); + goto unlock; + } + cprh_opp_remove_table = true; + } + + ret = cpr3_corner_init(thread); + if (ret) + goto exit; + + if (drv->desc->cpr_type < CTRL_TYPE_CPRH) { + ret = cpr3_find_initial_corner(thread); + if (ret) + goto exit; + + if (acc_desc->config) + regmap_multi_reg_write(drv->tcsr, acc_desc->config, + acc_desc->num_regs_per_fuse); + + /* Enable ACC if required */ + if (acc_desc->enable_mask) + regmap_update_bits(drv->tcsr, acc_desc->enable_reg, + acc_desc->enable_mask, + acc_desc->enable_mask); + } + dev_info(drv->dev, "thread %d initialized with %u OPPs\n", + thread->id, thread->num_corners); +exit: + /* + * If we are on CPRh and we reached an error condition, we installed + * the OPP table but we haven't done any setup on it, nor we ever will. + * In order to leave a clean state, remove the table. + */ + if (ret && cprh_opp_remove_table) + dev_pm_opp_of_remove_table(thread->attached_cpu_dev); +unlock: + mutex_unlock(&drv->lock); + + return ret; +} + +static int cpr3_debug_info_show(struct seq_file *s, void *unused) +{ + struct cpr_thread *thread = s->private; + struct fuse_corner *fuse = thread->fuse_corners; + struct corner *corner = thread->corners; + u32 tid = thread->desc->hw_tid; + u32 ctl, irq_status, reg; + unsigned int i; + + if (thread->drv->desc->cpr_type < CTRL_TYPE_CPRH) { + seq_printf(s, "current_volt = %d uV\n", thread->drv->last_uV); + seq_printf(s, "requested voltage: %d uV\n", thread->corner->last_uV); + } + + irq_status = cpr_read(thread, CPR3_REG_IRQ_STATUS); + seq_printf(s, "irq_status = 0x%x\n", irq_status); + + ctl = cpr_read(thread, CPR3_REG_CPR_CTL); + seq_printf(s, "cpr_ctl = 0x%x\n", ctl); + + seq_printf(s, "thread %d - hw tid: %u - enabled: %d:\n", + thread->id, thread->desc->hw_tid, thread->enabled); + seq_printf(s, "%d corners, derived from %d fuse corners\n", + thread->num_corners, thread->desc->num_fuse_corners); + + + /* The corners have not been initialized yet. */ + if (!thread->num_corners) + return 0; + + for (i = 0; i < thread->num_corners; i++, corner++) + seq_printf(s, "corner %d - uV=[%d %d %d] quot=%d freq=%llu\n", + i, corner->min_uV, corner->uV, corner->max_uV, + corner->quot_adjust, corner->freq); + + for (i = 0; i < thread->desc->num_fuse_corners; i++, fuse++) + seq_printf(s, "fuse %d - uV=[%d %d %d] quot=%d freq=%llu\n", + i, fuse->min_uV, fuse->uV, fuse->max_uV, + fuse->quot, corner->freq); + + reg = cpr_read(thread, CPR3_REG_RESULT0(tid)); + seq_printf(s, "cpr_result_0 = 0x%x\n [", reg); + seq_printf(s, "busy = %lu, ", FIELD_GET(CPR3_RESULT0_BUSY_MASK, reg)); + seq_printf(s, "step_dn = %lu, ", FIELD_GET(CPR3_RESULT0_STEP_DN_MASK, reg)); + seq_printf(s, "step_up = %lu, ", FIELD_GET(CPR3_RESULT0_STEP_UP_MASK, reg)); + seq_printf(s, "error_steps = %lu, ", FIELD_GET(CPR3_RESULT0_ERROR_STEPS_MASK, reg)); + seq_printf(s, "error = %lu, ", FIELD_GET(CPR3_RESULT0_ERROR_MASK, reg)); + seq_printf(s, "negative = %lu", FIELD_GET(CPR3_RESULT0_NEG_MASK, reg)); + seq_puts(s, "]\n"); + + reg = cpr_read(thread, CPR3_REG_RESULT1(tid)); + seq_printf(s, "cpr_result_1 = 0x%x\n [", reg); + seq_printf(s, "quot_min = %lu, ", FIELD_GET(CPR3_RESULT1_QUOT_MIN_MASK, reg)); + seq_printf(s, "quot_max = %lu, ", FIELD_GET(CPR3_RESULT1_QUOT_MAX_MASK, reg)); + seq_printf(s, "ro_min = %lu, ", FIELD_GET(CPR3_RESULT1_RO_MIN_MASK, reg)); + seq_printf(s, "ro_max = %lu", FIELD_GET(CPR3_RESULT1_RO_MAX_MASK, reg)); + seq_puts(s, "]\n"); + + reg = cpr_read(thread, CPR3_REG_RESULT2(tid)); + seq_printf(s, "cpr_result_2 = 0x%x\n [", reg); + seq_printf(s, "qout_step_min = %lu, ", FIELD_GET(CPR3_RESULT2_STEP_QUOT_MIN_MASK, reg)); + seq_printf(s, "qout_step_max = %lu, ", FIELD_GET(CPR3_RESULT2_STEP_QUOT_MAX_MASK, reg)); + seq_printf(s, "sensor_min = %lu, ", FIELD_GET(CPR3_RESULT2_SENSOR_MIN_MASK, reg)); + seq_printf(s, "sensor_max = %lu", FIELD_GET(CPR3_RESULT2_SENSOR_MAX_MASK, reg)); + seq_puts(s, "]\n"); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(cpr3_debug_info); + +static void cpr3_debugfs_init(struct cpr_drv *drv) +{ + int i; + + drv->debugfs = debugfs_create_dir("qcom_cpr3", NULL); + + for (i = 0; i < drv->desc->num_threads; i++) { + char buf[50]; + + snprintf(buf, sizeof(buf), "thread%d", i); + + debugfs_create_file(buf, 0444, drv->debugfs, &drv->threads[i], + &cpr3_debug_info_fops); + } +} + +/** + * cpr_thread_init() - Initialize CPR thread related parameters + * @drv: Main driver structure + * @tid: Thread ID + * + * Return: Zero for success, negative number on error + */ +static int cpr_thread_init(struct cpr_drv *drv, int tid) +{ + const struct cpr_desc *desc = drv->desc; + const struct cpr_thread_desc *tdesc = desc->threads[tid]; + struct cpr_thread *thread = &drv->threads[tid]; + bool pd_registered = false; + int ret, i; + + if (tdesc->step_quot_init_min > CPR3_CPR_STEP_QUOT_MIN_MASK || + tdesc->step_quot_init_max > CPR3_CPR_STEP_QUOT_MAX_MASK) + return -EINVAL; + + thread->id = tid; + thread->drv = drv; + thread->desc = tdesc; + thread->fuse_corners = devm_kcalloc(drv->dev, + tdesc->num_fuse_corners + + drv->extra_corners, + sizeof(*thread->fuse_corners), + GFP_KERNEL); + if (!thread->fuse_corners) + return -ENOMEM; + + thread->cpr_fuses = cpr_get_fuses(drv->dev, tid, + tdesc->num_fuse_corners); + if (IS_ERR(thread->cpr_fuses)) + return PTR_ERR(thread->cpr_fuses); + + ret = cpr_populate_ring_osc_idx(thread->drv->dev, thread->fuse_corners, + thread->cpr_fuses, + tdesc->num_fuse_corners); + if (ret) + return ret; + + ret = cpr_fuse_corner_init(thread); + if (ret) + return ret; + + thread->pd.name = devm_kasprintf(drv->dev, GFP_KERNEL, + "%s_thread%d", + drv->dev->of_node->full_name, + thread->id); + if (!thread->pd.name) + return -EINVAL; + + thread->pd.power_off = cpr_power_off; + thread->pd.power_on = cpr_power_on; + thread->pd.opp_to_performance_state = cpr_get_performance_state; + thread->pd.attach_dev = cpr_pd_attach_dev; + thread->pd.detach_dev = cpr_pd_detach_dev; + + /* CPR-Hardened performance states are managed in firmware */ + if (desc->cpr_type == CTRL_TYPE_CPRH) + thread->pd.set_performance_state = cprh_dummy_set_performance_state; + else + thread->pd.set_performance_state = cpr_set_performance_state; + + /* Anything later than CPR1 must be always-on for now */ + thread->pd.flags = GENPD_FLAG_ALWAYS_ON; + + drv->cell_data.domains[tid] = &thread->pd; + + ret = pm_genpd_init(&thread->pd, NULL, false); + if (ret < 0) + goto fail; + else + pd_registered = true; + + /* On CPRhardened, the interrupts are managed in firmware */ + if (desc->cpr_type < CTRL_TYPE_CPRH) { + INIT_WORK(&thread->restart_work, cpr_restart_worker); + + ret = devm_request_threaded_irq(drv->dev, drv->irq, + NULL, cpr_irq_handler, + IRQF_ONESHOT | + IRQF_TRIGGER_RISING, + "cpr", drv); + if (ret) + goto fail; + } + + return 0; + +fail: + /* Unregister all previously registered genpds */ + for (i = tid - pd_registered; i >= 0; i--) + pm_genpd_remove(&drv->threads[i].pd); + + return ret; +} + +/** + * cpr3_resources_init() - Initialize resources used by this driver + * @pdev: Platform device + * @drv: Main driver structure + * + * Return: Zero for success, negative number on error + */ +static int cpr3_resources_init(struct platform_device *pdev, + struct cpr_drv *drv) +{ + const struct cpr_desc *desc = drv->desc; + struct cpr_thread *threads = drv->threads; + unsigned int i; + u8 cid_mask = 0; + + /* + * Here, we are accounting for the following usecases: + * - One controller + * - One or multiple threads on the same iospace + * + * - Multiple controllers + * - Each controller has its own iospace and each + * may have one or multiple threads in their + * parent controller's iospace + * + * Then, to avoid complicating the code for no reason, + * this also needs a mandatory order in the list of + * threads which implies that all of them from the same + * controllers are specified sequentially. As an example: + * + * C0-T0, C0-T1...C0-Tn, C1-T0, C1-T1...C1-Tn + */ + for (i = 0; i < desc->num_threads; i++) { + u8 cid = desc->threads[i]->controller_id; + + if (cid_mask & BIT(cid)) { + if (desc->threads[i - 1]->controller_id != cid) { + dev_err(drv->dev, "Bad threads order. Please fix!\n"); + return -EINVAL; + } + threads[i].base = threads[i - 1].base; + continue; + } + threads[i].base = devm_platform_ioremap_resource(pdev, cid); + if (IS_ERR(threads[i].base)) + return PTR_ERR(threads[i].base); + cid_mask |= BIT(cid); + } + return 0; +} + +static int cpr_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct cpr_drv *drv; + const struct cpr_desc *desc; + const struct cpr_acc_desc *data; + struct device_node *np; + unsigned int i; + int ret; + + data = of_device_get_match_data(dev); + if (!data || !data->cpr_desc) + return -EINVAL; + + desc = data->cpr_desc; + + /* CPRh disallows MEM-ACC access from the HLOS */ + if (!data->acc_desc && desc->cpr_type < CTRL_TYPE_CPRH) + return -EINVAL; + + drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL); + if (!drv) + return -ENOMEM; + + drv->dev = dev; + drv->desc = desc; + drv->threads = devm_kcalloc(dev, desc->num_threads, + sizeof(*drv->threads), GFP_KERNEL); + if (!drv->threads) + return -ENOMEM; + + drv->cell_data.num_domains = desc->num_threads; + drv->cell_data.domains = devm_kcalloc(drv->dev, + drv->cell_data.num_domains, + sizeof(*drv->cell_data.domains), + GFP_KERNEL); + if (!drv->cell_data.domains) + return -ENOMEM; + + if (data->acc_desc) + drv->acc_desc = data->acc_desc; + + mutex_init(&drv->lock); + + if (desc->cpr_type < CTRL_TYPE_CPRH) { + np = of_parse_phandle(dev->of_node, "qcom,acc", 0); + if (!np) + return -ENODEV; + + drv->tcsr = syscon_node_to_regmap(np); + of_node_put(np); + if (IS_ERR(drv->tcsr)) + return PTR_ERR(drv->tcsr); + } + + ret = cpr3_resources_init(pdev, drv); + if (ret) + return ret; + + drv->irq = platform_get_irq_optional(pdev, 0); + if (desc->cpr_type != CTRL_TYPE_CPRH && drv->irq < 0) + return -EINVAL; + + /* On CPRhardened, vreg access it not allowed */ + drv->vreg = devm_regulator_get_optional(dev, "vdd"); + if (desc->cpr_type != CTRL_TYPE_CPRH && IS_ERR(drv->vreg)) + return PTR_ERR(drv->vreg); + + /* + * On at least CPRhardened, vreg is unaccessible and there is no + * way to read linear step from that regulator, hence it is hardcoded + * in the driver; + * When the vreg_step is not declared in the cpr data (or is zero), + * then having access to the vreg regulator is mandatory, as this + * will be retrieved through the regulator API. + */ + if (desc->vreg_step_fixed) + drv->vreg_step = desc->vreg_step_fixed; + else + drv->vreg_step = regulator_get_linear_step(drv->vreg); + + if (!drv->vreg_step) + return -EINVAL; + + /* + * Initialize fuse corners, since it simply depends + * on data in efuses. + * Everything related to (virtual) corners has to be + * initialized after attaching to the power domain, + * since it depends on the CPU's OPP table. + */ + ret = nvmem_cell_read_variable_le_u32(dev, "cpr_fuse_revision", &drv->fusing_rev); + if (ret) + return ret; + + ret = nvmem_cell_read_variable_le_u32(dev, "cpr_speed_bin", &drv->speed_bin); + if (ret) + return ret; + + /* + * Some SoCs require extra corners for MEM-ACC or APM: if + * the related parameters have been specified, then reserve + * a corner for the APM and/or MEM-ACC crossover, used by + * OSM and CPRh HW to set the supply voltage during the APM + * and/or MEM-ACC switch routine. + */ + if (desc->cpr_type == CTRL_TYPE_CPRH) { + if (desc->apm_crossover && desc->apm_hysteresis >= 0) + drv->extra_corners++; + + if (desc->mem_acc_threshold) + drv->extra_corners++; + } + + /* Initialize all threads */ + for (i = 0; i < desc->num_threads; i++) { + ret = cpr_thread_init(drv, i); + if (ret) + return ret; + } + + /* Initialize global parameters */ + ret = cpr3_init_parameters(drv); + if (ret) + goto unreg_genpd; + + /* Write initial configuration on all threads */ + for (i = 0; i < desc->num_threads; i++) { + ret = cpr_configure(&drv->threads[i]); + if (ret) + goto unreg_genpd; + } + + ret = of_genpd_add_provider_onecell(dev->of_node, &drv->cell_data); + if (ret) + goto unreg_genpd; + + platform_set_drvdata(pdev, drv); + cpr3_debugfs_init(drv); + + return 0; + +unreg_genpd: + /* Clean up genpds */ + for (i = desc->num_threads - 1; i >= 0; i--) + pm_genpd_remove(&drv->threads[i].pd); + + return ret; +} + +static int cpr_remove(struct platform_device *pdev) +{ + struct cpr_drv *drv = platform_get_drvdata(pdev); + int i; + + of_genpd_del_provider(pdev->dev.of_node); + + for (i = 0; i < drv->desc->num_threads; i++) { + cpr_ctl_disable(&drv->threads[i]); + cpr_irq_set(&drv->threads[i], 0); + pm_genpd_remove(&drv->threads[i].pd); + } + + debugfs_remove_recursive(drv->debugfs); + + return 0; +} + +static const struct of_device_id cpr3_match_table[] = { + { .compatible = "qcom,msm8998-cprh", .data = &msm8998_cpr_acc_desc }, + { .compatible = "qcom,sdm630-cprh", .data = &sdm630_cpr_acc_desc }, + { } +}; +MODULE_DEVICE_TABLE(of, cpr3_match_table); + +static struct platform_driver cpr3_driver = { + .probe = cpr_probe, + .remove = cpr_remove, + .driver = { + .name = "qcom-cpr3", + .of_match_table = cpr3_match_table, + }, +}; +module_platform_driver(cpr3_driver) + +MODULE_DESCRIPTION("Core Power Reduction (CPR) v3/v4 driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig index 715348869d04..bda706cb4b01 100644 --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig @@ -29,6 +29,7 @@ config QCOM_COMMAND_DB config QCOM_CPR tristate "QCOM Core Power Reduction (CPR) support" depends on ARCH_QCOM && HAS_IOMEM + select QCOM_CPR_COMMON select PM_OPP select REGMAP help @@ -42,6 +43,27 @@ config QCOM_CPR To compile this driver as a module, choose M here: the module will be called qcom-cpr +config QCOM_CPR_COMMON + tristate + +config QCOM_CPR3 + tristate "QCOM Core Power Reduction (CPR v3/v4/Hardened) support" + depends on ARCH_QCOM && HAS_IOMEM + select QCOM_CPR_COMMON + select PM_OPP + select REGMAP + help + Say Y here to enable support for the CPR hardware found on a broad + variety of Qualcomm SoCs like MSM8996, MSM8998, SDM630, SDM660, + SDM845 and others. + + This driver populates OPP tables and makes adjustments to them + based on feedback from the CPR hardware. If you want to do CPU + and/or GPU frequency scaling say Y here. + + To compile this driver as a module, choose M here: the module will + be called qcom-cpr3 + config QCOM_GENI_SE tristate "QCOM GENI Serial Engine Driver" depends on ARCH_QCOM || COMPILE_TEST diff --git a/include/soc/qcom/cpr.h b/include/soc/qcom/cpr.h new file mode 100644 index 000000000000..2ba4324d18f6 --- /dev/null +++ b/include/soc/qcom/cpr.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2013-2020, The Linux Foundation. All rights reserved. + * Copyright (c) 2019 Linaro Limited + * Copyright (c) 2021, AngeloGioacchino Del Regno + * + */ + +#ifndef __CPR_H__ +#define __CPR_H__ + +struct cpr_ext_data { + int mem_acc_threshold_uV; + int apm_threshold_uV; +}; + +#endif /* __CPR_H__ */ From patchwork Wed Aug 2 12:37:50 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 129896 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a59:9f41:0:b0:3e4:2afc:c1 with SMTP id v1csp542277vqx; Wed, 2 Aug 2023 08:34:54 -0700 (PDT) X-Google-Smtp-Source: APBJJlH/OIu1hDFw/OwpC9xgLqbWqSI3rGB0LEqzVkb1R+wFehnVaAq0eeExnNbUzlyUsss/fitT X-Received: by 2002:a17:906:10db:b0:99b:b867:4969 with SMTP id v27-20020a17090610db00b0099bb8674969mr6162827ejv.64.1690990494596; Wed, 02 Aug 2023 08:34:54 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1690990494; cv=none; d=google.com; s=arc-20160816; b=XvabSYyU0CjRsoHFVcrUkMOB9nwG2M/zk6IitmqPIJmaZplgHDljwXaZ14HbET737V DbSi3e4zRKQli1aycEs7puVV0OXQUd+MbHt+6ByhkcPaapFKbC9YNR9hPLwj65nzjEpx Z0uKN1qJmms88IMdX/v0M2MXY9i5PxIA2lXgTP3SBflhGag3QXd4pXFekzxp4Be3MAjg 1PxdCDG6UIAdpFx2eXz2mkURLy5aqQj60X71V0Nj16WbA7p/OOBQjjOIF/z4xGovVwo4 2FYa9qW9xg0q8CYGWYw0bkUFIrN7sMIcz+jVWIJsF1pfpZpD1R9iSH4NDnn38YZauDHv BXUQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:cc:to:in-reply-to:references:message-id :content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=yWpzhnQyuCXmHr6iRBAVFa2JqHGslJH+d5J1UDbZiG0=; fh=00i92FozdW145dv//HsHG4vo6csyYOdIKUCuPIVTXBE=; b=sgYZBOGVqqJ1hXUY4YSk3bNNa9U4rWmQ1HYWJ9vh/pcj3zQccpVropysWbjPgI4Owc zmTOsyYKZQFFlXaxNzoyeI4WevwV1dggPvLORGaZ2sUM0vIi55yWZiLBGGKGfBdpvSVx JB8C6YiX9cpxDFH8cRKhjJJSCe9WtY+/MXil5BX+UgEaX8eRpZ6GdIEbFhJWpvejTllL 2olyi3VMFrCYZzQFliLo7WNk/7nB2SMDlggwkN6QlOIup6sIav02dKdgZjk3q/XI0U9m 3EwlB7NDoP9ttm3gkRIR4Kp8qYvyA2cYfag1iyc4ie2GDUrkC5CVQqxk6yhsoKdwX7A7 lUMg== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=eC1jcE1D; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id lu10-20020a170906faca00b0099bd646e72asi10126252ejb.309.2023.08.02.08.34.29; Wed, 02 Aug 2023 08:34:54 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=eC1jcE1D; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234715AbjHBMj3 (ORCPT + 99 others); Wed, 2 Aug 2023 08:39:29 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58598 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234661AbjHBMjG (ORCPT ); Wed, 2 Aug 2023 08:39:06 -0400 Received: from mail-lj1-x22f.google.com (mail-lj1-x22f.google.com [IPv6:2a00:1450:4864:20::22f]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 6FE183591 for ; Wed, 2 Aug 2023 05:38:38 -0700 (PDT) Received: by mail-lj1-x22f.google.com with SMTP id 38308e7fff4ca-2b962535808so106055201fa.0 for ; Wed, 02 Aug 2023 05:38:38 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1690979916; x=1691584716; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=yWpzhnQyuCXmHr6iRBAVFa2JqHGslJH+d5J1UDbZiG0=; b=eC1jcE1Dv0P2qrgUmuxi5JIeIIlp4rWdrZUUSj97jPrLbLs7Le2LB6efqzewaZFhQf nvtpjdoKamisetWlheTb/2VBaNIr/Z2e2xeITuXshtHNoNEge5QcLUr5PhkED+/g6rL1 KICwqcr7a56MT4O7DLgNl5Kw3OTPNOb6Qa+6nn/zlF566ZBxlCJTu/qefSHD2pouE3Q0 vtOVDd4Zu+yGlDRUwPBieYR5tvOXxuDywYOwUbUFCpHU6TKzbt16bnn5vEnkd7IsjFLf 4YCy0aBYaJIsahYo4jT4wR/ZL0rRlEYUyW+6UfIWoZKEynpaBOO/Kfa0SGCWVTNcqEXj waIw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1690979916; x=1691584716; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=yWpzhnQyuCXmHr6iRBAVFa2JqHGslJH+d5J1UDbZiG0=; b=ODML4/xXPk3Jdf+IyK5YiTkZfDTBvIe5gF+oudJiSYCMrXpr13em1+hYeD/+WEpRzk 03PwDHS1SZ0BEfnHhU8doMIv9DpubbbO4YtAclfnqNCci+HxCKErD4G7G0VXbzQeWCgv BvqaHEmZrLtj10UJ3mYUbLvnPUpwTaRC5iLTXIu62Mozsi4VoobXfRK+VUvm5WVyBlXg TFIbIjiDpAot1YyOukgV28Le7vMz/cY+gz2VwPxpXaTel94NSb01sqlm5F6H4YyWlOYX ls6VtGlm8wBj1OWSggSmzcjHG3er4QOfsqirzoReJ/RN8fsU4Rym8FLRFnNMeO4JdORE 6lLQ== X-Gm-Message-State: ABy/qLY6GoCpx7BNtN0ySx0Y6gRyDHYQ9G7X2SBAyfpnV9m16weXmRoZ AnwQS2jHJbhCpT+JN0q/iEoi1Q== X-Received: by 2002:a2e:8812:0:b0:2b8:3a1e:eec9 with SMTP id x18-20020a2e8812000000b002b83a1eeec9mr4854604ljh.36.1690979915719; Wed, 02 Aug 2023 05:38:35 -0700 (PDT) Received: from [192.168.1.101] (abyk53.neoplus.adsl.tpnet.pl. [83.9.30.53]) by smtp.gmail.com with ESMTPSA id h8-20020a2e9ec8000000b002b9e5fe86dasm1897050ljk.81.2023.08.02.05.38.33 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 02 Aug 2023 05:38:35 -0700 (PDT) From: Konrad Dybcio Date: Wed, 02 Aug 2023 14:37:50 +0200 Subject: [PATCH v13 10/10] arm64: dts: qcom: msm8998: Configure CPRh MIME-Version: 1.0 Message-Id: <20230217-topic-cpr3h-v13-10-d01cff1c54cf@linaro.org> References: <20230217-topic-cpr3h-v13-0-d01cff1c54cf@linaro.org> In-Reply-To: <20230217-topic-cpr3h-v13-0-d01cff1c54cf@linaro.org> To: AngeloGioacchino Del Regno , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Viresh Kumar , Nishanth Menon , Stephen Boyd , Niklas Cassel , Liam Girdwood , Mark Brown , Conor Dooley , "Rafael J. Wysocki" , Viresh Kumar , Ulf Hansson Cc: Robert Marko , linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-pm@vger.kernel.org, Jeffrey Hugo , Marijn Suijten , Konrad Dybcio , AngeloGioacchino Del Regno X-Mailer: b4 0.12.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1690979891; l=20963; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=We+qvKn3JTrFqYADA1GiGktR+dtEoTtIhBLgqH+EQR0=; b=EtA8n4b4oStmFXwQfH8wFVshXI1cpNiXCuNrW/WXDTsXb0MaTn0rJsRAkOAdv5hVUD+PlnCZm qga4gg0qAYUDEexTMS+9cII24BCB1+H9GF3toP5zqg2aOa9ZoEOPN9z X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED, SPF_HELO_NONE,SPF_PASS,T_SCC_BODY_TEXT_LINE,URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-getmail-retrieved-from-mailbox: INBOX X-GMAIL-THRID: 1773132048698180692 X-GMAIL-MSGID: 1773132048698180692 From: AngeloGioacchino Del Regno Now that the CPR v3/v4/Hardened is ready, enable it on MSM8998. [Konrad: separate from adding cpufreq, sort nodes, use lowercase hex, update for driver changes] Signed-off-by: AngeloGioacchino Del Regno Tested-by: Jeffrey Hugo Signed-off-by: Konrad Dybcio --- arch/arm64/boot/dts/qcom/msm8998.dtsi | 757 ++++++++++++++++++++++++++++++++++ 1 file changed, 757 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 360fe3edcc08..88b1efe0d34d 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -143,6 +143,9 @@ CPU0: cpu@0 { capacity-dmips-mhz = <1024>; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; + operating-points-v2 = <&cpu0_opp_table>; + power-domains = <&apc_cprh 0>; + power-domain-names = "cprh"; L2_0: l2-cache { compatible = "cache"; cache-level = <2>; @@ -158,6 +161,9 @@ CPU1: cpu@1 { capacity-dmips-mhz = <1024>; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; + operating-points-v2 = <&cpu0_opp_table>; + power-domains = <&apc_cprh 0>; + power-domain-names = "cprh"; }; CPU2: cpu@2 { @@ -168,6 +174,9 @@ CPU2: cpu@2 { capacity-dmips-mhz = <1024>; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; + operating-points-v2 = <&cpu0_opp_table>; + power-domains = <&apc_cprh 0>; + power-domain-names = "cprh"; }; CPU3: cpu@3 { @@ -178,6 +187,9 @@ CPU3: cpu@3 { capacity-dmips-mhz = <1024>; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; + operating-points-v2 = <&cpu0_opp_table>; + power-domains = <&apc_cprh 0>; + power-domain-names = "cprh"; }; CPU4: cpu@100 { @@ -188,6 +200,9 @@ CPU4: cpu@100 { capacity-dmips-mhz = <1536>; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; + operating-points-v2 = <&cpu4_opp_table>; + power-domains = <&apc_cprh 1>; + power-domain-names = "cprh"; L2_1: l2-cache { compatible = "cache"; cache-level = <2>; @@ -203,6 +218,9 @@ CPU5: cpu@101 { capacity-dmips-mhz = <1536>; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; + operating-points-v2 = <&cpu4_opp_table>; + power-domains = <&apc_cprh 1>; + power-domain-names = "cprh"; }; CPU6: cpu@102 { @@ -213,6 +231,9 @@ CPU6: cpu@102 { capacity-dmips-mhz = <1536>; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; + operating-points-v2 = <&cpu4_opp_table>; + power-domains = <&apc_cprh 1>; + power-domain-names = "cprh"; }; CPU7: cpu@103 { @@ -223,6 +244,9 @@ CPU7: cpu@103 { capacity-dmips-mhz = <1536>; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; + operating-points-v2 = <&cpu4_opp_table>; + power-domains = <&apc_cprh 1>; + power-domain-names = "cprh"; }; cpu-map { @@ -316,6 +340,490 @@ scm { }; }; + cprh_opp_table: opp-table-cprh { + compatible = "operating-points-v2-qcom-level"; + + cprh_opp1: opp-1 { + opp-level = <1>; + qcom,opp-fuse-level = <1 1>; + qcom,opp-cloop-vadj = <0 0>; + qcom,opp-oloop-vadj = <0 0>; + }; + + cprh_opp2: opp-2 { + opp-level = <2>; + qcom,opp-fuse-level = <1 1>; + qcom,opp-cloop-vadj = <0 0>; + qcom,opp-oloop-vadj = <0 0>; + }; + + cprh_opp3: opp-3 { + opp-level = <3>; + qcom,opp-fuse-level = <1 1>; + qcom,opp-cloop-vadj = <0 0>; + qcom,opp-oloop-vadj = <0 0>; + }; + + cprh_opp4: opp-4 { + opp-level = <4>; + qcom,opp-fuse-level = <1 1>; + qcom,opp-cloop-vadj = <0 0>; + qcom,opp-oloop-vadj = <0 0>; + }; + + cprh_opp5: opp-5 { + opp-level = <5>; + qcom,opp-fuse-level = <1 1>; + qcom,opp-cloop-vadj = <0 0>; + qcom,opp-oloop-vadj = <0 0>; + }; + + cprh_opp6: opp-6 { + opp-level = <6>; + qcom,opp-fuse-level = <1 1>; + qcom,opp-cloop-vadj = <0 0>; + qcom,opp-oloop-vadj = <0 0>; + }; + + cprh_opp7: opp-7 { + opp-level = <7>; + qcom,opp-fuse-level = <1 1>; + qcom,opp-cloop-vadj = <0 0>; + qcom,opp-oloop-vadj = <0 0>; + }; + + cprh_opp8: opp-8 { + opp-level = <8>; + qcom,opp-fuse-level = <1 1>; + qcom,opp-cloop-vadj = <0 0>; + qcom,opp-oloop-vadj = <0 0>; + }; + + cprh_opp9: opp-9 { + opp-level = <9>; + qcom,opp-fuse-level = <2 2>; + qcom,opp-cloop-vadj = <0 0>; + qcom,opp-oloop-vadj = <0 0>; + }; + + cprh_opp10: opp-10 { + opp-level = <10>; + qcom,opp-fuse-level = <2 2>; + qcom,opp-cloop-vadj = <0 0>; + qcom,opp-oloop-vadj = <0 0>; + }; + + cprh_opp11: opp-11 { + opp-level = <11>; + qcom,opp-fuse-level = <2 2>; + qcom,opp-cloop-vadj = <0 0>; + qcom,opp-oloop-vadj = <0 0>; + }; + + cprh_opp12: opp-12 { + opp-level = <12>; + qcom,opp-fuse-level = <3 2>; + qcom,opp-cloop-vadj = <(-10000) (-10000)>; + qcom,opp-oloop-vadj = <(-12000) (-8000)>; + }; + + cprh_opp13: opp-13 { + opp-level = <13>; + qcom,opp-fuse-level = <3 3>; + qcom,opp-cloop-vadj = <(-11000) (-10000)>; + qcom,opp-oloop-vadj = <(-16000) (-16000)>; + }; + + cprh_opp14: opp-14 { + opp-level = <14>; + qcom,opp-fuse-level = <3 3>; + qcom,opp-cloop-vadj = <(-12000) (-11000)>; + qcom,opp-oloop-vadj = <(-16000) (-12000)>; + }; + + cprh_opp15: opp-15 { + opp-level = <15>; + qcom,opp-fuse-level = <3 3>; + qcom,opp-cloop-vadj = <(-13000) (-12000)>; + qcom,opp-oloop-vadj = <(-12000) (-16000)>; + }; + + cprh_opp16: opp-16 { + opp-level = <16>; + qcom,opp-fuse-level = <3 3>; + qcom,opp-cloop-vadj = <(-14000) (-12000)>; + qcom,opp-oloop-vadj = <(-12000) (-16000)>; + }; + + cprh_opp17: opp-17 { + opp-level = <17>; + qcom,opp-fuse-level = <3 3>; + qcom,opp-cloop-vadj = <(-14000) (-13000)>; + qcom,opp-oloop-vadj = <(-16000) (-12000)>; + }; + + cprh_opp18: opp-18 { + opp-level = <18>; + qcom,opp-fuse-level = <3 3>; + qcom,opp-cloop-vadj = <(-15000) (-14000)>; + qcom,opp-oloop-vadj = <(-16000) (-16000)>; + }; + + cprh_opp19: opp-19 { + opp-level = <19>; + qcom,opp-fuse-level = <4 3>; + qcom,opp-cloop-vadj = <(-21000) (-14000)>; + qcom,opp-oloop-vadj = <(-20000) (-16000)>; + }; + + cprh_opp20: opp-20 { + opp-level = <20>; + qcom,opp-fuse-level = <4 3>; + qcom,opp-cloop-vadj = <(-24000) (-15000)>; + qcom,opp-oloop-vadj = <(-24000) (-16000)>; + }; + + cprh_opp21: opp-21 { + opp-level = <21>; + qcom,opp-fuse-level = <4 4>; + qcom,opp-cloop-vadj = <(-26000) (-16000)>; + qcom,opp-oloop-vadj = <(-28000) (-24000)>; + }; + + cprh_opp22: opp-22 { + opp-level = <22>; + qcom,opp-fuse-level = <4 4>; + qcom,opp-cloop-vadj = <(-28000) (-16000)>; + qcom,opp-oloop-vadj = <(-28000) (-16000)>; + }; + + cprh_opp23: opp-23 { + opp-level = <23>; + qcom,opp-fuse-level = <4 4>; + qcom,opp-cloop-vadj = <0 (-17000)>; + qcom,opp-oloop-vadj = <0 (-20000)>; + }; + + cprh_opp24: opp-24 { + opp-level = <24>; + qcom,opp-fuse-level = <4 4>; + qcom,opp-cloop-vadj = <0 (-15000)>; + qcom,opp-oloop-vadj = <0 (-16000)>; + }; + + cprh_opp25: opp-25 { + opp-level = <25>; + qcom,opp-fuse-level = <4 4>; + qcom,opp-cloop-vadj = <0 (-14000)>; + qcom,opp-oloop-vadj = <0 (-12000)>; + }; + + cprh_opp26: opp-26 { + opp-level = <26>; + qcom,opp-fuse-level = <4 4>; + qcom,opp-cloop-vadj = <0 (-27000)>; + qcom,opp-oloop-vadj = <0 (-28000)>; + }; + + cprh_opp27: opp-27 { + opp-level = <27>; + qcom,opp-fuse-level = <4 4>; + qcom,opp-cloop-vadj = <0 (-27000)>; + qcom,opp-oloop-vadj = <0 (-28000)>; + }; + + cprh_opp28: opp-28 { + opp-level = <28>; + qcom,opp-fuse-level = <4 4>; + qcom,opp-cloop-vadj = <0 (-28000)>; + qcom,opp-oloop-vadj = <0 (-28000)>; + }; + + cprh_opp29: opp-29 { + opp-level = <29>; + qcom,opp-fuse-level = <4 4>; + qcom,opp-cloop-vadj = <0 (-28000)>; + qcom,opp-oloop-vadj = <0 (-28000)>; + }; + + cprh_opp30: opp-30 { + opp-level = <30>; + qcom,opp-fuse-level = <4 4>; + qcom,opp-cloop-vadj = <0 (-28000)>; + qcom,opp-oloop-vadj = <0 (-28000)>; + }; + }; + + cpu0_opp_table: opp-table-cpu0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1900800000 { + opp-hz = /bits/ 64 <1900800000>; + required-opps = <&cprh_opp22>; + }; + + opp-1824000000 { + opp-hz = /bits/ 64 <1824000000>; + required-opps = <&cprh_opp21>; + }; + + opp-1747200000 { + opp-hz = /bits/ 64 <1747200000>; + required-opps = <&cprh_opp20>; + }; + + opp-1670400000 { + opp-hz = /bits/ 64 <1670400000>; + required-opps = <&cprh_opp19>; + }; + + opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + required-opps = <&cprh_opp18>; + }; + + opp-1478400000 { + opp-hz = /bits/ 64 <1478400000>; + required-opps = <&cprh_opp17>; + }; + + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + required-opps = <&cprh_opp16>; + }; + + opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + required-opps = <&cprh_opp15>; + }; + + opp-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + required-opps = <&cprh_opp14>; + }; + + opp-1171200000 { + opp-hz = /bits/ 64 <1171200000>; + required-opps = <&cprh_opp13>; + }; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + required-opps = <&cprh_opp12>; + }; + + opp-1036800000 { + opp-hz = /bits/ 64 <1036800000>; + required-opps = <&cprh_opp11>; + }; + + opp-960000000 { + opp-hz = /bits/ 64 <960000000>; + required-opps = <&cprh_opp10>; + }; + + opp-883200000 { + opp-hz = /bits/ 64 <883200000>; + required-opps = <&cprh_opp9>; + }; + + opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + required-opps = <&cprh_opp8>; + }; + + opp-748800000 { + opp-hz = /bits/ 64 <748800000>; + required-opps = <&cprh_opp7>; + }; + + opp-672000000 { + opp-hz = /bits/ 64 <672000000>; + required-opps = <&cprh_opp6>; + }; + + opp-595200000 { + opp-hz = /bits/ 64 <595200000>; + required-opps = <&cprh_opp5>; + }; + + opp-518400000 { + opp-hz = /bits/ 64 <518400000>; + required-opps = <&cprh_opp4>; + }; + + opp-441600000 { + opp-hz = /bits/ 64 <441600000>; + required-opps = <&cprh_opp3>; + }; + + opp-364800000 { + opp-hz = /bits/ 64 <364800000>; + required-opps = <&cprh_opp2>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&cprh_opp1>; + }; + }; + + cpu4_opp_table: opp-table-cpu4 { + compatible = "operating-points-v2"; + opp-shared; + + opp-2361600000 { + opp-hz = /bits/ 64 <2361600000>; + required-opps = <&cprh_opp30>; + }; + + opp-2342400000 { + opp-hz = /bits/ 64 <2342400000>; + required-opps = <&cprh_opp29>; + }; + + opp-2323200000 { + opp-hz = /bits/ 64 <2323200000>; + required-opps = <&cprh_opp28>; + }; + + opp-2265600000 { + opp-hz = /bits/ 64 <2265600000>; + required-opps = <&cprh_opp27>; + }; + + opp-2208000000 { + opp-hz = /bits/ 64 <2208000000>; + required-opps = <&cprh_opp26>; + }; + + opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + required-opps = <&cprh_opp25>; + }; + + opp-2035200000 { + opp-hz = /bits/ 64 <2035200000>; + required-opps = <&cprh_opp24>; + }; + + opp-1958400000 { + opp-hz = /bits/ 64 <1958400000>; + required-opps = <&cprh_opp23>; + }; + + opp-1881600000 { + opp-hz = /bits/ 64 <1881600000>; + required-opps = <&cprh_opp22>; + }; + + opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + required-opps = <&cprh_opp21>; + }; + + opp-1728000000 { + opp-hz = /bits/ 64 <1728000000>; + required-opps = <&cprh_opp20>; + }; + + opp-1651200000 { + opp-hz = /bits/ 64 <1651200000>; + required-opps = <&cprh_opp19>; + }; + + opp-1574400000 { + opp-hz = /bits/ 64 <1574400000>; + required-opps = <&cprh_opp18>; + }; + + opp-1497600000 { + opp-hz = /bits/ 64 <1497600000>; + required-opps = <&cprh_opp17>; + }; + + opp-1420800000 { + opp-hz = /bits/ 64 <1420800000>; + required-opps = <&cprh_opp16>; + }; + + opp-1344000000 { + opp-hz = /bits/ 64 <1344000000>; + required-opps = <&cprh_opp15>; + }; + + opp-1267200000 { + opp-hz = /bits/ 64 <1267200000>; + required-opps = <&cprh_opp14>; + }; + + opp-1190400000 { + opp-hz = /bits/ 64 <1190400000>; + required-opps = <&cprh_opp13>; + }; + + opp-1132800000 { + opp-hz = /bits/ 64 <1132800000>; + required-opps = <&cprh_opp12>; + }; + + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + required-opps = <&cprh_opp11>; + }; + + opp-979200000 { + opp-hz = /bits/ 64 <979200000>; + required-opps = <&cprh_opp10>; + }; + + opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + required-opps = <&cprh_opp9>; + }; + + opp-806400000 { + opp-hz = /bits/ 64 <806400000>; + required-opps = <&cprh_opp8>; + }; + + opp-729600000 { + opp-hz = /bits/ 64 <729600000>; + required-opps = <&cprh_opp7>; + }; + + opp-652800000 { + opp-hz = /bits/ 64 <652800000>; + required-opps = <&cprh_opp6>; + }; + + opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + required-opps = <&cprh_opp5>; + }; + + opp-499200000 { + opp-hz = /bits/ 64 <499200000>; + required-opps = <&cprh_opp4>; + }; + + opp-422400000 { + opp-hz = /bits/ 64 <422400000>; + required-opps = <&cprh_opp3>; + }; + + opp-345600000 { + opp-hz = /bits/ 64 <345600000>; + required-opps = <&cprh_opp2>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&cprh_opp1>; + }; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -851,6 +1359,174 @@ qfprom: qfprom@784000 { #address-cells = <1>; #size-cells = <1>; + cpr_efuse_speedbin: speedbin@133 { + reg = <0x133 0x8>; + bits = <5 3>; + }; + + cpr_fuse_revision: cpr-fusing-rev@13e { + reg = <0x13e 0x1>; + bits = <3 3>; + }; + + /* CPR Ring Oscillator: Power Cluster */ + cpr_ro_sel3_pwrcl: rosel3-pwrcl@218 { + reg = <0x218 0x1>; + bits = <0 4>; + }; + + cpr_ro_sel2_pwrcl: rosel2-pwrcl@218 { + reg = <0x218 0x1>; + bits = <4 4>; + }; + + cpr_ro_sel1_pwrcl: rosel1-pwrcl@219 { + reg = <0x219 0x1>; + bits = <0 4>; + }; + + cpr_ro_sel0_pwrcl: rosel0-pwrcl@219 { + reg = <0x219 0x1>; + bits = <4 4>; + }; + + /* CPR Init Voltage: Power Cluster */ + cpr_init_voltage3_pwrcl: ivolt3-pwrcl@21a { + reg = <0x21a 0x1>; + bits = <0 6>; + }; + + cpr_init_voltage2_pwrcl: ivolt2-pwrcl@21a { + reg = <0x21a 0x2>; + bits = <6 6>; + }; + + cpr_init_voltage1_pwrcl: ivolt1-pwrcl@21b { + reg = <0x21b 0x2>; + bits = <4 6>; + }; + + cpr_init_voltage0_pwrcl: ivolt0-pwrcl@21c { + reg = <0x21c 0x1>; + bits = <2 6>; + }; + + /* CPR Target Quotients: Power Cluster */ + cpr_quot3_pwrcl: quot3-pwrcl@21d { + reg = <0x21d 0x3>; + bits = <6 12>; + }; + + cpr_quot2_pwrcl: quot2-pwrcl@21f { + reg = <0x21f 0x2>; + bits = <2 11>; + }; + + cpr_quot1_pwrcl: quot1-pwrcl@220 { + reg = <0x220 0x3>; + bits = <6 12>; + }; + + cpr_quot0_pwrcl: quot0-pwrcl@222 { + reg = <0x222 0x2>; + bits = <2 12>; + }; + + /* CPR Quotient Offsets: Power Cluster */ + cpr_quot_offset3_pwrcl: qoff3-pwrcl@226 { + reg = <0x226 0x1>; + bits = <1 7>; + }; + + cpr_quot_offset2_pwrcl: qoff2-pwrcl@227 { + reg = <0x227 0x1>; + bits = <0 7>; + }; + + cpr_quot_offset1_pwrcl: qoff1-pwrcl@227 { + reg = <0x227 0x2>; + bits = <7 6>; + }; + + /* CPR Ring Oscillator: Performance Cluster */ + cpr_ro_sel3_perfcl: rosel3-perfcl@229 { + reg = <0x229 0x2>; + bits = <6 4>; + }; + + cpr_ro_sel2_perfcl: rosel2-perfcl@22a { + reg = <0x22a 0x1>; + bits = <2 4>; + }; + + cpr_ro_sel1_perfcl: rosel1-perfcl@22a { + reg = <0x22a 0x2>; + bits = <6 4>; + }; + + cpr_ro_sel0_perfcl: rosel0-perfcl@22b { + reg = <0x22b 0x1>; + bits = <2 4>; + }; + + /* CPR Init Voltage: Performance Cluster */ + cpr_init_voltage3_perfcl: ivolt3-perfcl@22b { + reg = <0x22b 0x2>; + bits = <6 6>; + }; + + cpr_init_voltage2_perfcl: ivolt2-perfcl@22c { + reg = <0x22c 0x2>; + bits = <4 6>; + }; + + cpr_init_voltage1_perfcl: ivolt1-perfcl@22d { + reg = <0x22d 0x1>; + bits = <2 6>; + }; + + cpr_init_voltage0_perfcl: ivolt0-perfcl@22e { + reg = <0x22e 0x1>; + bits = <0 6>; + }; + + /* CPR Target Quotients: Performance Cluster */ + cpr_quot3_perfcl: quot3-perfcl@22f { + reg = <0x22f 0x2>; + bits = <4 11>; + }; + + cpr_quot2_perfcl: quot2-perfcl@231 { + reg = <0x231 0x2>; + bits = <0 12>; + }; + + cpr_quot1_perfcl: quot1-perfcl@232 { + reg = <0x232 0x2>; + bits = <4 12>; + }; + + cpr_quot0_perfcl: quot0-perfcl@234 { + reg = <0x234 0x2>; + bits = <0 12>; + }; + + /* CPR Quotient Offsets: Performance Cluster */ + cpr_quot_offset3_perfcl: qoff3-perfcl@237 { + reg = <0x237 0x2>; + bits = <7 6>; + }; + + cpr_quot_offset2_perfcl: qoff2-perfcl@238 { + reg = <0x238 0x2>; + bits = <6 7>; + }; + + cpr_quot_offset1_perfcl: qoff1-perfcl@239 { + reg = <0x239 0x1>; + bits = <5 3>; + }; + qusb2_hstx_trim: hstx-trim@23a { reg = <0x23a 0x1>; bits = <0 4>; @@ -2871,6 +3547,87 @@ frame@17928000 { }; }; + apc_cprh: power-controller@179c8000 { + compatible = "qcom,msm8998-cprh", "qcom,cprh"; + reg = <0x179c8000 0x4000>, + <0x179c4000 0x4000>; + + clocks = <&gcc GCC_HMSS_RBCPR_CLK>; + + /* Set the CPR clock here, it needs to match XO */ + assigned-clocks = <&gcc GCC_HMSS_RBCPR_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&cprh_opp_table>; + power-domains = <&rpmpd MSM8998_VDDCX_AO>; + #power-domain-cells = <1>; + + nvmem-cells = <&cpr_efuse_speedbin>, + <&cpr_fuse_revision>, + <&cpr_quot0_pwrcl>, + <&cpr_quot1_pwrcl>, + <&cpr_quot2_pwrcl>, + <&cpr_quot3_pwrcl>, + <&cpr_quot_offset1_pwrcl>, + <&cpr_quot_offset2_pwrcl>, + <&cpr_quot_offset3_pwrcl>, + <&cpr_init_voltage0_pwrcl>, + <&cpr_init_voltage1_pwrcl>, + <&cpr_init_voltage2_pwrcl>, + <&cpr_init_voltage3_pwrcl>, + <&cpr_ro_sel0_pwrcl>, + <&cpr_ro_sel1_pwrcl>, + <&cpr_ro_sel2_pwrcl>, + <&cpr_ro_sel3_pwrcl>, + <&cpr_quot0_perfcl>, + <&cpr_quot1_perfcl>, + <&cpr_quot2_perfcl>, + <&cpr_quot3_perfcl>, + <&cpr_quot_offset1_perfcl>, + <&cpr_quot_offset2_perfcl>, + <&cpr_quot_offset3_perfcl>, + <&cpr_init_voltage0_perfcl>, + <&cpr_init_voltage1_perfcl>, + <&cpr_init_voltage2_perfcl>, + <&cpr_init_voltage3_perfcl>, + <&cpr_ro_sel0_perfcl>, + <&cpr_ro_sel1_perfcl>, + <&cpr_ro_sel2_perfcl>, + <&cpr_ro_sel3_perfcl>; + nvmem-cell-names = "cpr_speed_bin", + "cpr_fuse_revision", + "cpr0_quotient1", + "cpr0_quotient2", + "cpr0_quotient3", + "cpr0_quotient4", + "cpr0_quotient_offset2", + "cpr0_quotient_offset3", + "cpr0_quotient_offset4", + "cpr0_init_voltage1", + "cpr0_init_voltage2", + "cpr0_init_voltage3", + "cpr0_init_voltage4", + "cpr0_ring_osc1", + "cpr0_ring_osc2", + "cpr0_ring_osc3", + "cpr0_ring_osc4", + "cpr1_quotient1", + "cpr1_quotient2", + "cpr1_quotient3", + "cpr1_quotient4", + "cpr1_quotient_offset2", + "cpr1_quotient_offset3", + "cpr1_quotient_offset4", + "cpr1_init_voltage1", + "cpr1_init_voltage2", + "cpr1_init_voltage3", + "cpr1_init_voltage4", + "cpr1_ring_osc1", + "cpr1_ring_osc2", + "cpr1_ring_osc3", + "cpr1_ring_osc4"; + }; + intc: interrupt-controller@17a00000 { compatible = "arm,gic-v3"; reg = <0x17a00000 0x10000>, /* GICD */