From patchwork Wed Mar 1 18:37:55 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Rokosov X-Patchwork-Id: 63029 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a5d:5915:0:0:0:0:0 with SMTP id v21csp3803929wrd; Wed, 1 Mar 2023 10:51:08 -0800 (PST) X-Google-Smtp-Source: AK7set8QLS8D6ePT1IptQv5k/6QnP66Wxm7IsRnSeDIIAnoF2B+utBL0O5vqxA3/yUl7BvN0qUvu X-Received: by 2002:a05:6402:4e:b0:4aa:a4f0:2c17 with SMTP id f14-20020a056402004e00b004aaa4f02c17mr9156036edu.4.1677696668306; Wed, 01 Mar 2023 10:51:08 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1677696668; cv=none; d=google.com; s=arc-20160816; b=rwRhEkzfVYvP3EhG4oxfSn8FeIcTK4ygSGne1tN/2gnAlEIWe9cfVvSrUMLfViVSg/ GNi6a0fLFgvzqS+R3e6uvSag3lhU/qeLr9mP1VcKnJiodsSiiBmpvdbAwCOmMwvPdKo8 xGL+gIKDn3m5gVY1V7Hb/pdC1p/WYeDtBwKliGAH6L2+8TQoFApD/2Su5fzbN9LqFt5V JAUP8EB0ZgzP17KhsQDy7XlcipJpfzkrOJZNdjgAHzEgjJs4M1zTLbNykY9R3/6D1+XD 33rUWQ2a1pbTCqAooumVoJvX1b8tYD6rTQ8bgtQDCMtriVzqWFmGCPmY70l3hxpsu/EH BaTg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=0kocuhoTDaz9h1jxIA/Jw2sp5SwkBuT+pW8CQZu+FkI=; b=LAC5ceHaFmXjjKkOk+0vf14OQ9WT6qvl8KSEO9nCS4RyeY5H2nynI83QJUM5RLXXig /KZivPZ1P6Dx+pGICjlwmW0/3EfhfLna/FMcmqr1BD+eXM/74N9dZpyGHtAH23y+mj9K MH9Zc4qlZTKZLS1DrKbCyPKXZagFAAee13j7ozZayAgbBSS4j+OWpBh3KJ40g45WJRt3 03EzAH1BrLbbmdTYRnoQbP7sCEeIGV1ic/8aMOx+I/zGnOtrHlcCUajZiKkFTddr5b7p 71ViX3LlRFwQ7bRALqeOC2QGqnI20znlQ+MODLc13+4JXDqwJERXtJIsXIvbSyfVmpkk 24oQ== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@sberdevices.ru header.s=mail header.b=NLO7Knkp; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=QUARANTINE dis=NONE) header.from=sberdevices.ru Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id c16-20020aa7d610000000b004acc0bdcdf6si7101830edr.216.2023.03.01.10.50.40; Wed, 01 Mar 2023 10:51:08 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass header.i=@sberdevices.ru header.s=mail header.b=NLO7Knkp; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=QUARANTINE dis=NONE) header.from=sberdevices.ru Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230003AbjCASi3 (ORCPT + 99 others); Wed, 1 Mar 2023 13:38:29 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:45256 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229914AbjCASiZ (ORCPT ); Wed, 1 Mar 2023 13:38:25 -0500 Received: from mx.sberdevices.ru (mx.sberdevices.ru [45.89.227.171]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C70A46EB9; Wed, 1 Mar 2023 10:38:22 -0800 (PST) Received: from s-lin-edge02.sberdevices.ru (localhost [127.0.0.1]) by mx.sberdevices.ru (Postfix) with ESMTP id EC8B05FD79; Wed, 1 Mar 2023 21:38:19 +0300 (MSK) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sberdevices.ru; s=mail; t=1677695900; bh=0kocuhoTDaz9h1jxIA/Jw2sp5SwkBuT+pW8CQZu+FkI=; h=From:To:Subject:Date:Message-ID:MIME-Version:Content-Type; b=NLO7KnkpUh18PTGTgGFBmQtwPZed+65GMfDM2dRjY8TUOpmDaU2B/majDIwnFiG/i pp90tpA3cYOi2n06gpULFofjHqW5GE/3KwlGiQT6ZtsKVaOgqGzTMcyH0tnrWA5Lgi ZkxIlYOChlznk7x4niHMaLq/XCmQ28lHNKn3mdSJSTZmfhZT5ye6jNoGhUl+e7wUp2 aI0B5GburZa3elK/mQdvO5VGq4sdQGLcK2DfEMWafRp+W5Yr/7ijztUxDCe79okzJA fgXqbKwZKzZhW141636WQkWCVgm9h+wvOXYTBfqEMasJ/ac70eKNdPkWDhIC67meZk hh4FMsZ3+1wIA== Received: from S-MS-EXCH01.sberdevices.ru (S-MS-EXCH01.sberdevices.ru [172.16.1.4]) by mx.sberdevices.ru (Postfix) with ESMTP; Wed, 1 Mar 2023 21:38:19 +0300 (MSK) From: Dmitry Rokosov To: , , , , , , , CC: , , , , , , , , Dmitry Rokosov Subject: [PATCH v9 1/5] clk: meson: add support for A1 PLL clock ops Date: Wed, 1 Mar 2023 21:37:55 +0300 Message-ID: <20230301183759.16163-2-ddrokosov@sberdevices.ru> X-Mailer: git-send-email 2.36.0 In-Reply-To: <20230301183759.16163-1-ddrokosov@sberdevices.ru> References: <20230301183759.16163-1-ddrokosov@sberdevices.ru> MIME-Version: 1.0 X-Originating-IP: [172.16.1.6] X-ClientProxiedBy: S-MS-EXCH01.sberdevices.ru (172.16.1.4) To S-MS-EXCH01.sberdevices.ru (172.16.1.4) X-KSMG-Rule-ID: 4 X-KSMG-Message-Action: clean X-KSMG-AntiSpam-Status: not scanned, disabled by settings X-KSMG-AntiSpam-Interceptor-Info: not scanned X-KSMG-AntiPhishing: not scanned, disabled by settings X-KSMG-AntiVirus: Kaspersky Secure Mail Gateway, version 1.1.2.30, bases: 2023/03/01 14:15:00 #20905952 X-KSMG-AntiVirus-Status: Clean, skipped X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-getmail-retrieved-from-mailbox: =?utf-8?q?INBOX?= X-GMAIL-THRID: =?utf-8?q?1759192461727499634?= X-GMAIL-MSGID: =?utf-8?q?1759192461727499634?= From: Jian Hu Modern meson PLL IPs are a little bit different from early known PLLs. The main difference is located in the init/enable/disable sequences; the rate logic is the same. Compared with the previous SoCs, self-adaption current module is newly added for A1, and there is no reset parameter except the fixed pll. In A1 PLL, the PLL enable sequence is different, using the new power-on sequence to enable the PLL. Signed-off-by: Jian Hu Acked-by: Martin Blumenstingl Signed-off-by: Dmitry Rokosov --- drivers/clk/meson/clk-pll.c | 47 +++++++++++++++++++++++++++++++------ drivers/clk/meson/clk-pll.h | 2 ++ 2 files changed, 42 insertions(+), 7 deletions(-) diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c index afefeba6e458..56ec2210f1ad 100644 --- a/drivers/clk/meson/clk-pll.c +++ b/drivers/clk/meson/clk-pll.c @@ -295,10 +295,14 @@ static int meson_clk_pll_init(struct clk_hw *hw) struct meson_clk_pll_data *pll = meson_clk_pll_data(clk); if (pll->init_count) { - meson_parm_write(clk->map, &pll->rst, 1); + if (MESON_PARM_APPLICABLE(&pll->rst)) + meson_parm_write(clk->map, &pll->rst, 1); + regmap_multi_reg_write(clk->map, pll->init_regs, pll->init_count); - meson_parm_write(clk->map, &pll->rst, 0); + + if (MESON_PARM_APPLICABLE(&pll->rst)) + meson_parm_write(clk->map, &pll->rst, 0); } return 0; @@ -309,8 +313,11 @@ static int meson_clk_pll_is_enabled(struct clk_hw *hw) struct clk_regmap *clk = to_clk_regmap(hw); struct meson_clk_pll_data *pll = meson_clk_pll_data(clk); - if (meson_parm_read(clk->map, &pll->rst) || - !meson_parm_read(clk->map, &pll->en) || + if (MESON_PARM_APPLICABLE(&pll->rst) && + meson_parm_read(clk->map, &pll->rst)) + return 0; + + if (!meson_parm_read(clk->map, &pll->en) || !meson_parm_read(clk->map, &pll->l)) return 0; @@ -341,13 +348,34 @@ static int meson_clk_pll_enable(struct clk_hw *hw) return 0; /* Make sure the pll is in reset */ - meson_parm_write(clk->map, &pll->rst, 1); + if (MESON_PARM_APPLICABLE(&pll->rst)) + meson_parm_write(clk->map, &pll->rst, 1); /* Enable the pll */ meson_parm_write(clk->map, &pll->en, 1); /* Take the pll out reset */ - meson_parm_write(clk->map, &pll->rst, 0); + if (MESON_PARM_APPLICABLE(&pll->rst)) + meson_parm_write(clk->map, &pll->rst, 0); + + /* + * Compared with the previous SoCs, self-adaption current module + * is newly added for A1, keep the new power-on sequence to enable the + * PLL. The sequence is: + * 1. enable the pll, delay for 10us + * 2. enable the pll self-adaption current module, delay for 40us + * 3. enable the lock detect module + */ + if (MESON_PARM_APPLICABLE(&pll->current_en)) { + usleep_range(10, 20); + meson_parm_write(clk->map, &pll->current_en, 1); + usleep_range(40, 50); + }; + + if (MESON_PARM_APPLICABLE(&pll->l_detect)) { + meson_parm_write(clk->map, &pll->l_detect, 1); + meson_parm_write(clk->map, &pll->l_detect, 0); + } if (meson_clk_pll_wait_lock(hw)) return -EIO; @@ -361,10 +389,15 @@ static void meson_clk_pll_disable(struct clk_hw *hw) struct meson_clk_pll_data *pll = meson_clk_pll_data(clk); /* Put the pll is in reset */ - meson_parm_write(clk->map, &pll->rst, 1); + if (MESON_PARM_APPLICABLE(&pll->rst)) + meson_parm_write(clk->map, &pll->rst, 1); /* Disable the pll */ meson_parm_write(clk->map, &pll->en, 0); + + /* Disable PLL internal self-adaption current module */ + if (MESON_PARM_APPLICABLE(&pll->current_en)) + meson_parm_write(clk->map, &pll->current_en, 0); } static int meson_clk_pll_set_rate(struct clk_hw *hw, unsigned long rate, diff --git a/drivers/clk/meson/clk-pll.h b/drivers/clk/meson/clk-pll.h index 367efd0f6410..a2228c0fdce5 100644 --- a/drivers/clk/meson/clk-pll.h +++ b/drivers/clk/meson/clk-pll.h @@ -36,6 +36,8 @@ struct meson_clk_pll_data { struct parm frac; struct parm l; struct parm rst; + struct parm current_en; + struct parm l_detect; const struct reg_sequence *init_regs; unsigned int init_count; const struct pll_params_table *table; From patchwork Wed Mar 1 18:37:56 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Rokosov X-Patchwork-Id: 63030 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a5d:5915:0:0:0:0:0 with SMTP id v21csp3803922wrd; Wed, 1 Mar 2023 10:51:08 -0800 (PST) X-Google-Smtp-Source: AK7set8Ikpp1YrnxgrHhbJMTj2x5qEEqecmRUpRmZbdekvv/pAux1jx9HuE4QgDeMUVQ9ljLqhOx X-Received: by 2002:a17:906:1795:b0:8b1:20f4:44a3 with SMTP id t21-20020a170906179500b008b120f444a3mr6485712eje.7.1677696667848; Wed, 01 Mar 2023 10:51:07 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1677696667; cv=none; d=google.com; s=arc-20160816; b=MkPBJuED5KG8zKMJtvnjFZ5lBVkjhy29cfIe34yr4WFpwKeyobuwM702Jg8W2zoLja O48k79C1PuftXNBCuo/MpXgrxOvk/ormAMzsvELvwubVRPc0Fn5IUC1h08jvOR169cwJ nbiqvrQOlHSFScbA2pju20nfiU6UPr1q6GfhkmpxSlJyaUWdrdBwaf5DEznQjXmix/hr FoivJzXt5sqyaKeT/TtkT7Yb/XCb+oFFWBz56Be9rtHgLoBlDrlJDqZEpQxHknH4gPE8 NaGcN/q+AtebWLpiMTk+OxEgJ2SCApa/dRyk1b0sZBJQn5Mv6EI7KTSfV3x/hCv2AYoa AOhQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=Y1ClNeO/IfzDilO46T9zQGovTdnLJV+fYPRRx9cgGF0=; b=Sd6vpdVUsZ+se4VDQwBVMSvmlNRoBRUX8YHvqHqsCnn4Nb2iy+/kZPNikcXhX7pzp9 7zEjXMNLWojgc5nnfAqaZGB82N6fmoZjGAEBYyCHJic6rWycnWG2mpijRg/TEdPaIbhJ nGZ4Lmv38cXaKBXcGuCwBVPaumMrDeLr7gLsInyHeNVjHirn0PatSqmPxW3xxjin1qMc /HEIdUIw3WwMZjpfG4zkNccPTAxfWm8KwLRF0y2jTM9f976EfYI+zRyQpTbXLzCtdKfg r42mWYiR7yq4DVX3rUqa9+l3lkjjJIyWbJBtAyVlJNVfykiSM49uXT4tk8OmrXtykYGR AFnw== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@sberdevices.ru header.s=mail header.b=jvclV50n; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=QUARANTINE dis=NONE) header.from=sberdevices.ru Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id gh17-20020a170906e09100b008dee02689b5si1855548ejb.150.2023.03.01.10.50.45; Wed, 01 Mar 2023 10:51:07 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass header.i=@sberdevices.ru header.s=mail header.b=jvclV50n; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=QUARANTINE dis=NONE) header.from=sberdevices.ru Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229879AbjCASih (ORCPT + 99 others); Wed, 1 Mar 2023 13:38:37 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:45296 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229951AbjCASi0 (ORCPT ); Wed, 1 Mar 2023 13:38:26 -0500 Received: from mx.sberdevices.ru (mx.sberdevices.ru [45.89.227.171]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id DBAD27AA6; Wed, 1 Mar 2023 10:38:22 -0800 (PST) Received: from s-lin-edge02.sberdevices.ru (localhost [127.0.0.1]) by mx.sberdevices.ru (Postfix) with ESMTP id 86D815FD7A; Wed, 1 Mar 2023 21:38:20 +0300 (MSK) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sberdevices.ru; s=mail; t=1677695900; bh=Y1ClNeO/IfzDilO46T9zQGovTdnLJV+fYPRRx9cgGF0=; h=From:To:Subject:Date:Message-ID:MIME-Version:Content-Type; b=jvclV50n1aa0ob36vu2bBz8+7aTSjPGFmU0cT+kGnK/Jr4wcM2o9sJsfTv0LUh8Dk d7B0JnhsZuxu68Y4VN4zAPhhw2nVxiM4vVr7EG6naMPQZDcBeI8PQg6NBTGczTnNFw aYiJkOFACM5lUbVmlYfDMUWS8XtIi+tQDD8vcUjL8DggL7wBVtEhKP0xsOREUQ2ZoO ezSL0zuicDDt7nAPb1MHB/gfEb+47vAnCVXh91opTXEySGRUT7969oPPQLgIZBNCuW u9FeFZxu4CZyFeEZ6LDWixdlJAodz5L8NVIhPNf0nD8zj6ErKvBnQW/yJj4B2HQfwN DmJFM0jm3fLHQ== Received: from S-MS-EXCH01.sberdevices.ru (S-MS-EXCH01.sberdevices.ru [172.16.1.4]) by mx.sberdevices.ru (Postfix) with ESMTP; Wed, 1 Mar 2023 21:38:20 +0300 (MSK) From: Dmitry Rokosov To: , , , , , , , CC: , , , , , , , , Dmitry Rokosov Subject: [PATCH v9 2/5] clk: meson: a1: add Amlogic A1 PLL clock controller driver Date: Wed, 1 Mar 2023 21:37:56 +0300 Message-ID: <20230301183759.16163-3-ddrokosov@sberdevices.ru> X-Mailer: git-send-email 2.36.0 In-Reply-To: <20230301183759.16163-1-ddrokosov@sberdevices.ru> References: <20230301183759.16163-1-ddrokosov@sberdevices.ru> MIME-Version: 1.0 X-Originating-IP: [172.16.1.6] X-ClientProxiedBy: S-MS-EXCH01.sberdevices.ru (172.16.1.4) To S-MS-EXCH01.sberdevices.ru (172.16.1.4) X-KSMG-Rule-ID: 4 X-KSMG-Message-Action: clean X-KSMG-AntiSpam-Status: not scanned, disabled by settings X-KSMG-AntiSpam-Interceptor-Info: not scanned X-KSMG-AntiPhishing: not scanned, disabled by settings X-KSMG-AntiVirus: Kaspersky Secure Mail Gateway, version 1.1.2.30, bases: 2023/03/01 14:15:00 #20905952 X-KSMG-AntiVirus-Status: Clean, skipped X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-getmail-retrieved-from-mailbox: =?utf-8?q?INBOX?= X-GMAIL-THRID: =?utf-8?q?1759192461233522153?= X-GMAIL-MSGID: =?utf-8?q?1759192461233522153?= Introduce PLL clock controller for Amlogic A1 SoC family. Signed-off-by: Jian Hu Signed-off-by: Dmitry Rokosov --- drivers/clk/meson/Kconfig | 10 + drivers/clk/meson/Makefile | 1 + drivers/clk/meson/a1-pll.c | 365 +++++++++++++++++++++++++++++++++++++ drivers/clk/meson/a1-pll.h | 47 +++++ 4 files changed, 423 insertions(+) create mode 100644 drivers/clk/meson/a1-pll.c create mode 100644 drivers/clk/meson/a1-pll.h diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index fc002c155bc3..f56da2a4b000 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -99,6 +99,16 @@ config COMMON_CLK_AXG_AUDIO Support for the audio clock controller on AmLogic A113D devices, aka axg, Say Y if you want audio subsystem to work. +config COMMON_CLK_A1_PLL + tristate "Meson A1 SoC PLL controller support" + depends on ARM64 + select COMMON_CLK_MESON_REGMAP + select COMMON_CLK_MESON_PLL + help + Support for the PLL clock controller on Amlogic A113L based + device, A1 SoC Family. Say Y if you want A1 PLL clock controller + to work. + config COMMON_CLK_G12A tristate "G12 and SM1 SoC clock controllers support" depends on ARM64 diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index 6eca2a406ee3..2f17f475a48f 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o +obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o diff --git a/drivers/clk/meson/a1-pll.c b/drivers/clk/meson/a1-pll.c new file mode 100644 index 000000000000..c565f9b2a8dd --- /dev/null +++ b/drivers/clk/meson/a1-pll.c @@ -0,0 +1,365 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + * Author: Jian Hu + * + * Copyright (c) 2023, SberDevices. All Rights Reserved. + * Author: Dmitry Rokosov + */ + +#include +#include +#include +#include "meson-a1-clkc.h" +#include "a1-pll.h" +#include "clk-regmap.h" + +static struct clk_regmap fixed_pll_dco = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 0, + .width = 8, + }, + .n = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 10, + .width = 5, + }, + .frac = { + .reg_off = ANACTRL_FIXPLL_CTRL1, + .shift = 0, + .width = 19, + }, + .l = { + .reg_off = ANACTRL_FIXPLL_STS, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 29, + .width = 1, + }, + }, + .hw.init = &(struct clk_init_data){ + .name = "fixed_pll_dco", + .ops = &meson_clk_pll_ro_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "fixpll_in", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fixed_pll = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .bit_idx = 20, + }, + .hw.init = &(struct clk_init_data) { + .name = "fixed_pll", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &fixed_pll_dco.hw + }, + .num_parents = 1, + /* + * It is enough that the fdiv leaf has critical flag, + * No critical or unused flag here. + */ + }, +}; + +static const struct pll_mult_range hifi_pll_mult_range = { + .min = 32, + .max = 64, +}; + +static const struct reg_sequence hifi_init_regs[] = { + { .reg = ANACTRL_HIFIPLL_CTRL1, .def = 0x01800000 }, + { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00001100 }, + { .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x100a1100 }, + { .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x00302000 }, + { .reg = ANACTRL_HIFIPLL_CTRL0, .def = 0x01f18440 }, +}; + +static struct clk_regmap hifi_pll = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 0, + .width = 8, + }, + .n = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 10, + .width = 5, + }, + .frac = { + .reg_off = ANACTRL_HIFIPLL_CTRL1, + .shift = 0, + .width = 19, + }, + .l = { + .reg_off = ANACTRL_HIFIPLL_STS, + .shift = 31, + .width = 1, + }, + .current_en = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 26, + .width = 1, + }, + .l_detect = { + .reg_off = ANACTRL_HIFIPLL_CTRL2, + .shift = 6, + .width = 1, + }, + .range = &hifi_pll_mult_range, + .init_regs = hifi_init_regs, + .init_count = ARRAY_SIZE(hifi_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "hifi_pll", + .ops = &meson_clk_pll_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "hifipll_in", + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor fclk_div2_div = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div2 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .bit_idx = 21, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &fclk_div2_div.hw + }, + .num_parents = 1, + /* + * This clock is used by DDR clock in BL2 firmware + * and is required by the platform to operate correctly. + * Until the following condition are met, we need this clock to + * be marked as critical: + * a) Mark the clock used by a firmware resource, if possible + * b) CCF has a clock hand-off mechanism to make the sure the + * clock stays on until the proper driver comes along + */ + .flags = CLK_IS_CRITICAL, + }, +}; + +static struct clk_fixed_factor fclk_div3_div = { + .mult = 1, + .div = 3, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div3_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div3 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .bit_idx = 22, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div3", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &fclk_div3_div.hw + }, + .num_parents = 1, + /* + * This clock is used by APB bus which is set in boot ROM code + * and is required by the platform to operate correctly. + * About critical, refer to fclk_div2. + */ + .flags = CLK_IS_CRITICAL, + }, +}; + +static struct clk_fixed_factor fclk_div5_div = { + .mult = 1, + .div = 5, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div5_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div5 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .bit_idx = 23, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div5", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &fclk_div5_div.hw + }, + .num_parents = 1, + /* + * This clock is used by AXI bus which setted in Romcode + * and is required by the platform to operate correctly. + * About critical, refer to fclk_div2. + */ + .flags = CLK_IS_CRITICAL, + }, +}; + +static struct clk_fixed_factor fclk_div7_div = { + .mult = 1, + .div = 7, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div7_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div7 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div7", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &fclk_div7_div.hw + }, + .num_parents = 1, + }, +}; + +/* Array of all clocks provided by this provider */ +static struct clk_hw_onecell_data a1_pll_hw_onecell_data = { + .hws = { + [CLKID_FIXED_PLL_DCO] = &fixed_pll_dco.hw, + [CLKID_FIXED_PLL] = &fixed_pll.hw, + [CLKID_FCLK_DIV2_DIV] = &fclk_div2_div.hw, + [CLKID_FCLK_DIV3_DIV] = &fclk_div3_div.hw, + [CLKID_FCLK_DIV5_DIV] = &fclk_div5_div.hw, + [CLKID_FCLK_DIV7_DIV] = &fclk_div7_div.hw, + [CLKID_FCLK_DIV2] = &fclk_div2.hw, + [CLKID_FCLK_DIV3] = &fclk_div3.hw, + [CLKID_FCLK_DIV5] = &fclk_div5.hw, + [CLKID_FCLK_DIV7] = &fclk_div7.hw, + [CLKID_HIFI_PLL] = &hifi_pll.hw, + [NR_PLL_CLKS] = NULL, + }, + .num = NR_PLL_CLKS, +}; + +static struct clk_regmap *const a1_pll_regmaps[] = { + &fixed_pll_dco, + &fixed_pll, + &fclk_div2, + &fclk_div3, + &fclk_div5, + &fclk_div7, + &hifi_pll, +}; + +static struct regmap_config a1_pll_regmap_cfg = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static int meson_a1_pll_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct clk_hw *hw; + void __iomem *base; + struct regmap *map; + int clkid, i, err; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return dev_err_probe(dev, PTR_ERR(base), + "can't ioremap resource\n"); + + map = devm_regmap_init_mmio(dev, base, &a1_pll_regmap_cfg); + if (IS_ERR(map)) + return dev_err_probe(dev, PTR_ERR(map), + "can't init regmap mmio region\n"); + + /* Populate regmap for the regmap backed clocks */ + for (i = 0; i < ARRAY_SIZE(a1_pll_regmaps); i++) + a1_pll_regmaps[i]->map = map; + + for (clkid = 0; clkid < a1_pll_hw_onecell_data.num; clkid++) { + hw = a1_pll_hw_onecell_data.hws[clkid]; + err = devm_clk_hw_register(dev, hw); + if (err) + return dev_err_probe(dev, err, + "clock registration failed\n"); + } + + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, + &a1_pll_hw_onecell_data); +} + +#ifdef CONFIG_OF +static const struct of_device_id a1_pll_clkc_match_table[] = { + { .compatible = "amlogic,a1-pll-clkc", }, + {}, +}; +MODULE_DEVICE_TABLE(of, a1_pll_clkc_match_table); +#endif /* CONFIG_OF */ + +static struct platform_driver a1_pll_clkc_driver = { + .probe = meson_a1_pll_probe, + .driver = { + .name = "a1-pll-clkc", + .of_match_table = of_match_ptr(a1_pll_clkc_match_table), + }, +}; + +module_platform_driver(a1_pll_clkc_driver); +MODULE_AUTHOR("Jian Hu "); +MODULE_AUTHOR("Dmitry Rokosov "); +MODULE_LICENSE("GPL"); diff --git a/drivers/clk/meson/a1-pll.h b/drivers/clk/meson/a1-pll.h new file mode 100644 index 000000000000..de2eebce98af --- /dev/null +++ b/drivers/clk/meson/a1-pll.h @@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Amlogic Meson-A1 PLL Clock Controller internals + * + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + * Author: Jian Hu + * + * Copyright (c) 2023, SberDevices. All Rights Reserved. + * Author: Dmitry Rokosov + */ + +#ifndef __A1_PLL_H +#define __A1_PLL_H + +#include "clk-pll.h" + +/* PLL register offset */ +#define ANACTRL_FIXPLL_CTRL0 0x0 +#define ANACTRL_FIXPLL_CTRL1 0x4 +#define ANACTRL_FIXPLL_STS 0x14 +#define ANACTRL_HIFIPLL_CTRL0 0xc0 +#define ANACTRL_HIFIPLL_CTRL1 0xc4 +#define ANACTRL_HIFIPLL_CTRL2 0xc8 +#define ANACTRL_HIFIPLL_CTRL3 0xcc +#define ANACTRL_HIFIPLL_CTRL4 0xd0 +#define ANACTRL_HIFIPLL_STS 0xd4 + +/* + * CLKID index values + * + * These indices are entirely contrived and do not map onto the hardware. + * It has now been decided to expose everything by default in the DT header: + * include/dt-bindings/clock/a1-pll-clkc.h. Only the clocks ids we don't want + * to expose, such as the internal muxes and dividers of composite clocks, + * will remain defined here. + */ +#define CLKID_FIXED_PLL_DCO 0 +#define CLKID_FCLK_DIV2_DIV 2 +#define CLKID_FCLK_DIV3_DIV 3 +#define CLKID_FCLK_DIV5_DIV 4 +#define CLKID_FCLK_DIV7_DIV 5 +#define NR_PLL_CLKS 11 + +/* include the CLKIDs that have been made part of the DT binding */ +#include + +#endif /* __A1_PLL_H */ From patchwork Wed Mar 1 18:37:57 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Rokosov X-Patchwork-Id: 63028 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a5d:5915:0:0:0:0:0 with SMTP id v21csp3803838wrd; Wed, 1 Mar 2023 10:50:58 -0800 (PST) X-Google-Smtp-Source: AK7set9zfZmFRTtzh8EGmgjMI7C8JUE7WLW6q9l6bLqc8hs8+iZ85OvbQeX5paUkYpJVtBIxNVes X-Received: by 2002:a05:6402:488:b0:4ac:b760:f07a with SMTP id k8-20020a056402048800b004acb760f07amr8735374edv.19.1677696658219; Wed, 01 Mar 2023 10:50:58 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1677696658; cv=none; d=google.com; s=arc-20160816; b=obnJexv/4i/yfsOVKq2FjaQ9iAPjeNTGWAkNH3hslaOTeUsFBn959FFWgFq3mywIMA BckcpANvHwegceoGKhXcIN+BemjBBfzmfgvIXAHKblRxdCUDxQr+LmLixT6zprE9V2pE DiNur+MvwDWBlxznvWKWRsEl7Bl1Lx5YBAu/227zLGCubJ6qgySl75g7oA8cOcZhHkHe WpGQJ73aEh0Yj34Iw2rXy69YS2H0hTWnzS5Vl+zbxOS/Yla+Te7TlD0tbuTSgzNNiHnV iR5g4rxgMku8hbmI0xM3xAmm2jEaTe0Nyga3iBFqjtLawLpWXtZdfu8GZxtEt9P/U8zY nCWQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=4lzSSRDAueTokG7idMRN6V/pw7/JIu4u9zzIQC9zTX4=; b=CtIkRVRRuyF/wDUDiymFOHZIdIS38KCHw73vlwXJ0ErbvMQ9bgPLYKp7i9qq3J1UTx lem4SZ27MuZfYePYUVllkF4JgwTM5z9+Kp/YdxeQm7zhuOW1bBsV6ty8UiQ4Xh+bb8qn 3bl/h7HctbwaFhZGRz5aFt4PjWNvcn6X3LG7MRbUFmPMdZWWo73fcBI2SM5/IGBjyuqW Ca1o2V64jg6vGDMEcdSvV7qQhh//zVzOp8JnQauAVz4j9YvxXC417bE3KVtIZIuXQLXQ yYgQALW/eZl/jwOWzt9tnwhUYhPLDUrsKPQeZE5g2VSKED2VPeTYeFJePNSKLa0qX3l3 XiVQ== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@sberdevices.ru header.s=mail header.b=pQqWLSxI; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=QUARANTINE dis=NONE) header.from=sberdevices.ru Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id t13-20020a056402020d00b004acc42357cfsi7572997edv.364.2023.03.01.10.50.35; Wed, 01 Mar 2023 10:50:58 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass header.i=@sberdevices.ru header.s=mail header.b=pQqWLSxI; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=QUARANTINE dis=NONE) header.from=sberdevices.ru Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229683AbjCASi1 (ORCPT + 99 others); Wed, 1 Mar 2023 13:38:27 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:45278 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229498AbjCASiZ (ORCPT ); Wed, 1 Mar 2023 13:38:25 -0500 Received: from mx.sberdevices.ru (mx.sberdevices.ru [45.89.227.171]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 97EA57ABA; Wed, 1 Mar 2023 10:38:23 -0800 (PST) Received: from s-lin-edge02.sberdevices.ru (localhost [127.0.0.1]) by mx.sberdevices.ru (Postfix) with ESMTP id E9A245FD7B; Wed, 1 Mar 2023 21:38:21 +0300 (MSK) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sberdevices.ru; s=mail; t=1677695902; bh=4lzSSRDAueTokG7idMRN6V/pw7/JIu4u9zzIQC9zTX4=; h=From:To:Subject:Date:Message-ID:MIME-Version:Content-Type; b=pQqWLSxIV/7BWZpjAVSDayCrgqzpSsQT2+07DHiHUUgvhzT2lEN+3EFRsdAVVlMcJ I95/9LfOvE19zAerE7bAaF33j2t2+1u8Bq+Kzc0oE8qJigbtFY59vvY3QCH2nnT1KL Zk2Iq1yU6YSlEycQMtNzyZ7EivNDo44js/2A3pVo77bbGJV2NS1hQedx35aJkp1alj eDpYyADlZV6YvsAOnLdiBml0H7/zcx5Zw7LaUSYCsVX+jxPVZL8L14EoxCfUJtOatr j6+IT689Jj7skdRBMzQyiXb9j8zg366MPM7zxWv0LA+u98WxuQ6o8+rRmWp2rsQG2U +gUeLXYTF25Gg== Received: from S-MS-EXCH01.sberdevices.ru (S-MS-EXCH01.sberdevices.ru [172.16.1.4]) by mx.sberdevices.ru (Postfix) with ESMTP; Wed, 1 Mar 2023 21:38:21 +0300 (MSK) From: Dmitry Rokosov To: , , , , , , , CC: , , , , , , , , Dmitry Rokosov Subject: [PATCH v9 3/5] dt-bindings: clock: meson: add A1 PLL clock controller bindings Date: Wed, 1 Mar 2023 21:37:57 +0300 Message-ID: <20230301183759.16163-4-ddrokosov@sberdevices.ru> X-Mailer: git-send-email 2.36.0 In-Reply-To: <20230301183759.16163-1-ddrokosov@sberdevices.ru> References: <20230301183759.16163-1-ddrokosov@sberdevices.ru> MIME-Version: 1.0 X-Originating-IP: [172.16.1.6] X-ClientProxiedBy: S-MS-EXCH01.sberdevices.ru (172.16.1.4) To S-MS-EXCH01.sberdevices.ru (172.16.1.4) X-KSMG-Rule-ID: 4 X-KSMG-Message-Action: clean X-KSMG-AntiSpam-Status: not scanned, disabled by settings X-KSMG-AntiSpam-Interceptor-Info: not scanned X-KSMG-AntiPhishing: not scanned, disabled by settings X-KSMG-AntiVirus: Kaspersky Secure Mail Gateway, version 1.1.2.30, bases: 2023/03/01 14:15:00 #20905952 X-KSMG-AntiVirus-Status: Clean, skipped X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-getmail-retrieved-from-mailbox: =?utf-8?q?INBOX?= X-GMAIL-THRID: =?utf-8?q?1759192450961471847?= X-GMAIL-MSGID: =?utf-8?q?1759192450961471847?= Add the documentation for Amlogic A1 PLL clock driver, and A1 PLL clock controller bindings. Also include new A1 clock controller dt bindings to MAINTAINERS. Signed-off-by: Jian Hu Signed-off-by: Dmitry Rokosov --- .../bindings/clock/amlogic,a1-pll-clkc.yaml | 59 +++++++++++++++++++ MAINTAINERS | 1 + include/dt-bindings/clock/a1-pll-clkc.h | 20 +++++++ 3 files changed, 80 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml create mode 100644 include/dt-bindings/clock/a1-pll-clkc.h diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml new file mode 100644 index 000000000000..8bd2c948df86 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/amlogic,a1-pll-clkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson A/C serials PLL Clock Control Unit + +maintainers: + - Neil Armstrong + - Jerome Brunet + - Jian Hu + - Dmitry Rokosov + +properties: + compatible: + const: amlogic,a1-pll-clkc + + '#clock-cells': + const: 1 + + reg: + maxItems: 1 + + clocks: + items: + - description: input fixpll_in + - description: input hifipll_in + + clock-names: + items: + - const: fixpll_in + - const: hifipll_in + +required: + - compatible + - '#clock-cells' + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + apb { + #address-cells = <2>; + #size-cells = <2>; + + clock-controller@7c80 { + compatible = "amlogic,a1-pll-clkc"; + reg = <0 0x7c80 0 0x18c>; + #clock-cells = <1>; + clocks = <&clkc_periphs CLKID_FIXPLL_IN>, + <&clkc_periphs CLKID_HIFIPLL_IN>; + clock-names = "fixpll_in", "hifipll_in"; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 39ff1a717625..8438bc9bd636 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1895,6 +1895,7 @@ L: linux-amlogic@lists.infradead.org S: Maintained F: Documentation/devicetree/bindings/clock/amlogic* F: drivers/clk/meson/ +F: include/dt-bindings/clock/a1* F: include/dt-bindings/clock/gxbb* F: include/dt-bindings/clock/meson* diff --git a/include/dt-bindings/clock/a1-pll-clkc.h b/include/dt-bindings/clock/a1-pll-clkc.h new file mode 100644 index 000000000000..3a559518c6e6 --- /dev/null +++ b/include/dt-bindings/clock/a1-pll-clkc.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + * Author: Jian Hu + * + * Copyright (c) 2023, SberDevices. All Rights Reserved. + * Author: Dmitry Rokosov + */ + +#ifndef __A1_PLL_CLKC_H +#define __A1_PLL_CLKC_H + +#define CLKID_FIXED_PLL 1 +#define CLKID_FCLK_DIV2 6 +#define CLKID_FCLK_DIV3 7 +#define CLKID_FCLK_DIV5 8 +#define CLKID_FCLK_DIV7 9 +#define CLKID_HIFI_PLL 10 + +#endif /* __A1_PLL_CLKC_H */ From patchwork Wed Mar 1 18:37:58 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Rokosov X-Patchwork-Id: 63031 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a5d:5915:0:0:0:0:0 with SMTP id v21csp3803959wrd; Wed, 1 Mar 2023 10:51:11 -0800 (PST) X-Google-Smtp-Source: AK7set82Y0sSPzKUR84X2tNNf2tq30oh/eBW4b2+/EtKLgsStw+lH/p2ovc9C1V3VYwSDS5GF/MG X-Received: by 2002:aa7:c91a:0:b0:4af:5aa1:6e58 with SMTP id b26-20020aa7c91a000000b004af5aa16e58mr8701797edt.21.1677696671447; Wed, 01 Mar 2023 10:51:11 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1677696671; cv=none; d=google.com; s=arc-20160816; b=ba+GYP9b3xT3dqeBk4IA2FTUxQgnyPKfcYETaTD+we6jl3y7r5hFkkoH/XIWz5wZzn D9m+vmLwhmpFYA1qkBkYRFylT1z2MZ+NDzGeJ3+YJ4e+ao01DFYYk0f+I0yYqjLkaYJs mgpSBD8ZL+hy3x0zrnzoFxSgAXxICco3ovvq9aPF8p6XU1wfuEtQDRNBbHqxkmMAich7 lU3fKT1TzKjaBPGm2YQVvdKv7f1rY/6fP9qe4d3o+yY+nIV0Zqoe/TzIwokxkxCIZpNd n71sR8hVEzapoMhOA4HHTTesizeiM+TVkVUC8Qwo1noEOFRAPmNoB2ykutL/w8pBGoJw O0Bg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=cghPCMnA0KTGf+trKdvDsK3SrbvlXZu46fj+CNMppaM=; b=xQWLP/0bdCbV4kOKGVfAZN9Y5LSlDmiq4lU9ZlWjHUzdPKHzEybijAFlBembLqxp+5 sJQ4FkByiKYivfACcqxWwtiNL05Stm+GjAhfOY2Ujs5N378HJcu7gWEqFmA6SN7sJ1Gb aDqW/DphiZ20ciROS+Hr4ja2I939/z5kMxU2YuMx//CGB/+8PNk5sB0c98nxn7RBRKAr O3gs8C5NpnMDrMikg1oX/t/j6UYqzqYcaFjIWhju6qbCod6+GUBrYpR0+OJupTBDaHFC R8qB8sy6VBlfgSmcBR8YUMiqP+oKzFMDMKiKpaisa3ivS69Fo+auBqIa1RvWqHgeMdZs KwuA== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@sberdevices.ru header.s=mail header.b=E1WNS54x; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=QUARANTINE dis=NONE) header.from=sberdevices.ru Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id m5-20020aa7c2c5000000b004acd34e9368si2229296edp.187.2023.03.01.10.50.47; Wed, 01 Mar 2023 10:51:11 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass header.i=@sberdevices.ru header.s=mail header.b=E1WNS54x; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=QUARANTINE dis=NONE) header.from=sberdevices.ru Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230122AbjCASin (ORCPT + 99 others); Wed, 1 Mar 2023 13:38:43 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:45470 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230023AbjCASia (ORCPT ); Wed, 1 Mar 2023 13:38:30 -0500 Received: from mx.sberdevices.ru (mx.sberdevices.ru [45.89.227.171]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id D4D44B46B; Wed, 1 Mar 2023 10:38:24 -0800 (PST) Received: from s-lin-edge02.sberdevices.ru (localhost [127.0.0.1]) by mx.sberdevices.ru (Postfix) with ESMTP id 32F505FD7C; Wed, 1 Mar 2023 21:38:23 +0300 (MSK) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sberdevices.ru; s=mail; t=1677695903; bh=cghPCMnA0KTGf+trKdvDsK3SrbvlXZu46fj+CNMppaM=; h=From:To:Subject:Date:Message-ID:MIME-Version:Content-Type; b=E1WNS54xCAHZg965YCYi93UB+At3lEHc4kRx0ZGaj0I9JEAe7mTm+X6xM7S2YvXyf 0KG4yrVlBdpUtCBGKBq6gZB1kyD2/TmDm4XhG2puWs1R+YJnw3LQfyT4qQw+CB9KGu Tmw21Z7+JqgrY5sCgkUMyOcqTwYEXYfZwHNsWHj/1B4C3ZWK8op7sGX1gb94nq7OEN SV/RX9hhAJ2RxT18uHcVzfh0zNQ4MK6unWnGO5fml/0YbR4dfzS2jDurJaLbsvenUw WjbJ06a4K24ryvQd0bpTlAVwktENkAu+Bh5r9T5bZdU9agQgvKcxYsUGlSfEZybTpj GFdm8lG834HbA== Received: from S-MS-EXCH01.sberdevices.ru (S-MS-EXCH01.sberdevices.ru [172.16.1.4]) by mx.sberdevices.ru (Postfix) with ESMTP; Wed, 1 Mar 2023 21:38:23 +0300 (MSK) From: Dmitry Rokosov To: , , , , , , , CC: , , , , , , , , Dmitry Rokosov Subject: [PATCH v9 4/5] clk: meson: a1: add Amlogic A1 Peripherals clock controller driver Date: Wed, 1 Mar 2023 21:37:58 +0300 Message-ID: <20230301183759.16163-5-ddrokosov@sberdevices.ru> X-Mailer: git-send-email 2.36.0 In-Reply-To: <20230301183759.16163-1-ddrokosov@sberdevices.ru> References: <20230301183759.16163-1-ddrokosov@sberdevices.ru> MIME-Version: 1.0 X-Originating-IP: [172.16.1.6] X-ClientProxiedBy: S-MS-EXCH01.sberdevices.ru (172.16.1.4) To S-MS-EXCH01.sberdevices.ru (172.16.1.4) X-KSMG-Rule-ID: 4 X-KSMG-Message-Action: clean X-KSMG-AntiSpam-Status: not scanned, disabled by settings X-KSMG-AntiSpam-Interceptor-Info: not scanned X-KSMG-AntiPhishing: not scanned, disabled by settings X-KSMG-AntiVirus: Kaspersky Secure Mail Gateway, version 1.1.2.30, bases: 2023/03/01 14:15:00 #20905952 X-KSMG-AntiVirus-Status: Clean, skipped X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-getmail-retrieved-from-mailbox: =?utf-8?q?INBOX?= X-GMAIL-THRID: =?utf-8?q?1759192464790451457?= X-GMAIL-MSGID: =?utf-8?q?1759192464790451457?= Introduce Peripherals clock controller for Amlogic A1 SoC family. Signed-off-by: Jian Hu Signed-off-by: Dmitry Rokosov --- drivers/clk/meson/Kconfig | 10 + drivers/clk/meson/Makefile | 1 + drivers/clk/meson/a1.c | 2291 ++++++++++++++++++++++++++++++++++++ drivers/clk/meson/a1.h | 116 ++ 4 files changed, 2418 insertions(+) create mode 100644 drivers/clk/meson/a1.c create mode 100644 drivers/clk/meson/a1.h diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index f56da2a4b000..970892b07043 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -109,6 +109,16 @@ config COMMON_CLK_A1_PLL device, A1 SoC Family. Say Y if you want A1 PLL clock controller to work. +config COMMON_CLK_A1 + tristate "Meson A1 SoC clock controller support" + depends on ARM64 + select COMMON_CLK_MESON_DUALDIV + select COMMON_CLK_MESON_REGMAP + help + Support for the Peripherals clock controller on Amlogic A113L based + device, A1 SoC Family. Say Y if you want A1 Peripherals clock + controller to work. + config COMMON_CLK_G12A tristate "G12 and SM1 SoC clock controllers support" depends on ARM64 diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index 2f17f475a48f..0e6f293c05d4 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o +obj-$(CONFIG_COMMON_CLK_A1) += a1.o obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o diff --git a/drivers/clk/meson/a1.c b/drivers/clk/meson/a1.c new file mode 100644 index 000000000000..62468c49aac9 --- /dev/null +++ b/drivers/clk/meson/a1.c @@ -0,0 +1,2291 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + * Author: Jian Hu + * + * Copyright (c) 2023, SberDevices. All Rights Reserved. + * Author: Dmitry Rokosov + */ + +#include +#include +#include +#include "a1.h" +#include "clk-dualdiv.h" +#include "clk-regmap.h" +#include "meson-a1-clkc.h" + +static struct clk_regmap xtal_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 0, + }, + .hw.init = &(struct clk_init_data) { + .name = "xtal_in", + .ops = &clk_regmap_gate_ro_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fixpll_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 1, + }, + .hw.init = &(struct clk_init_data) { + .name = "fixpll_in", + .ops = &clk_regmap_gate_ro_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap usb_phy_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 2, + }, + .hw.init = &(struct clk_init_data) { + .name = "usb_phy_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap usb_ctrl_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 3, + }, + .hw.init = &(struct clk_init_data) { + .name = "usb_ctrl_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap hifipll_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 4, + }, + .hw.init = &(struct clk_init_data) { + .name = "hifipll_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap syspll_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 5, + }, + .hw.init = &(struct clk_init_data) { + .name = "syspll_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap dds_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 6, + }, + .hw.init = &(struct clk_init_data) { + .name = "dds_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap rtc_32k_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = RTC_BY_OSCIN_CTRL0, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data) { + .name = "rtc_32k_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static const struct meson_clk_dualdiv_param clk_32k_div_table[] = { + { + .dual = 1, + .n1 = 733, + .m1 = 8, + .n2 = 732, + .m2 = 11, + }, + {} +}; + +static struct clk_regmap rtc_32k_div = { + .data = &(struct meson_clk_dualdiv_data){ + .n1 = { + .reg_off = RTC_BY_OSCIN_CTRL0, + .shift = 0, + .width = 12, + }, + .n2 = { + .reg_off = RTC_BY_OSCIN_CTRL0, + .shift = 12, + .width = 12, + }, + .m1 = { + .reg_off = RTC_BY_OSCIN_CTRL1, + .shift = 0, + .width = 12, + }, + .m2 = { + .reg_off = RTC_BY_OSCIN_CTRL1, + .shift = 12, + .width = 12, + }, + .dual = { + .reg_off = RTC_BY_OSCIN_CTRL0, + .shift = 28, + .width = 1, + }, + .table = clk_32k_div_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "rtc_32k_div", + .ops = &meson_clk_dualdiv_ops, + .parent_hws = (const struct clk_hw *[]) { + &rtc_32k_in.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap rtc_32k_xtal = { + .data = &(struct clk_regmap_gate_data){ + .offset = RTC_BY_OSCIN_CTRL1, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data) { + .name = "rtc_32k_xtal", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &rtc_32k_in.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap rtc_32k_sel = { + .data = &(struct clk_regmap_mux_data) { + .offset = RTC_CTRL, + .mask = 0x3, + .shift = 0, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "rtc_32k_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &rtc_32k_xtal.hw, + &rtc_32k_div.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +struct clk_regmap rtc = { + .data = &(struct clk_regmap_gate_data){ + .offset = RTC_BY_OSCIN_CTRL0, + .bit_idx = 30, + }, + .hw.init = &(struct clk_init_data){ + .name = "rtc", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &rtc_32k_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static u32 mux_table_sys[] = { 0, 1, 2, 3, 7 }; +static const struct clk_parent_data sys_parents[] = { + { .fw_name = "xtal" }, + { .fw_name = "fclk_div2" }, + { .fw_name = "fclk_div3" }, + { .fw_name = "fclk_div5" }, + { .hw = &rtc.hw }, +}; + +static struct clk_regmap sys_b_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SYS_CLK_CTRL0, + .mask = 0x7, + .shift = 26, + .table = mux_table_sys, + }, + .hw.init = &(struct clk_init_data){ + .name = "sys_b_sel", + .ops = &clk_regmap_mux_ro_ops, + .parent_data = sys_parents, + .num_parents = ARRAY_SIZE(sys_parents), + }, +}; + +static struct clk_regmap sys_b_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SYS_CLK_CTRL0, + .shift = 16, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "sys_b_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &sys_b_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap sys_b = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_CLK_CTRL0, + .bit_idx = 29, + }, + .hw.init = &(struct clk_init_data) { + .name = "sys_b", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &sys_b_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap sys_a_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SYS_CLK_CTRL0, + .mask = 0x7, + .shift = 10, + .table = mux_table_sys, + }, + .hw.init = &(struct clk_init_data){ + .name = "sys_a_sel", + .ops = &clk_regmap_mux_ro_ops, + .parent_data = sys_parents, + .num_parents = ARRAY_SIZE(sys_parents), + }, +}; + +static struct clk_regmap sys_a_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SYS_CLK_CTRL0, + .shift = 0, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "sys_a_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &sys_a_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap sys_a = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_CLK_CTRL0, + .bit_idx = 13, + }, + .hw.init = &(struct clk_init_data) { + .name = "sys_a", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &sys_a_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap sys = { + .data = &(struct clk_regmap_mux_data){ + .offset = SYS_CLK_CTRL0, + .mask = 0x1, + .shift = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "sys", + .ops = &clk_regmap_mux_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &sys_a.hw, + &sys_b.hw, + }, + .num_parents = 2, + /* + * This clock is used by APB bus which is set in boot ROM code + * and is required by the platform to operate correctly. + * Until the following condition are met, we need this clock to + * be marked as critical: + * a) Mark the clock used by a firmware resource, if possible + * b) CCF has a clock hand-off mechanism to make the sure the + * clock stays on until the proper driver comes along + */ + .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, + }, +}; + +static u32 mux_table_dsp_ab[] = { 0, 1, 2, 3, 4, 7 }; +static const struct clk_parent_data dsp_ab_parent_data[] = { + { .fw_name = "xtal", }, + { .fw_name = "fclk_div2", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "hifi_pll", }, + { .hw = &rtc.hw }, +}; + +static struct clk_regmap dspa_a_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPA_CLK_CTRL0, + .mask = 0x7, + .shift = 10, + .table = mux_table_dsp_ab, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspa_a_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = dsp_ab_parent_data, + .num_parents = ARRAY_SIZE(dsp_ab_parent_data), + /* DSPA_A clk parent should be set statically from dt */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap dspa_a_div = { + .data = &(struct clk_regmap_div_data){ + .offset = DSPA_CLK_CTRL0, + .shift = 0, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspa_a_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspa_a_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspa_a = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPA_CLK_CTRL0, + .bit_idx = 13, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspa_a", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspa_a_div.hw + }, + .num_parents = 1, + /* + * DSPA_A accelerator clk, cannot be disabled by CCF if it + * has been set by bootloader + */ + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + }, +}; + +static struct clk_regmap dspa_b_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPA_CLK_CTRL0, + .mask = 0x7, + .shift = 26, + .table = mux_table_dsp_ab, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspa_b_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = dsp_ab_parent_data, + .num_parents = ARRAY_SIZE(dsp_ab_parent_data), + /* DSPA_B clk parent should be set statically from dt */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap dspa_b_div = { + .data = &(struct clk_regmap_div_data){ + .offset = DSPA_CLK_CTRL0, + .shift = 16, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspa_b_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspa_b_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspa_b = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPA_CLK_CTRL0, + .bit_idx = 29, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspa_b", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspa_b_div.hw + }, + .num_parents = 1, + /* + * DSPA_B accelerator clk, cannot be disabled by CCF if it + * has been set by bootloader + */ + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + }, +}; + +static struct clk_regmap dspa_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPA_CLK_CTRL0, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspa_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspa_a.hw, + &dspa_b.hw, + }, + .num_parents = 2, + /* DSPA clk parent should be set statically from dt */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap dspa_en = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPA_CLK_EN, + .bit_idx = 1, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspa_en", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspa_sel.hw + }, + .num_parents = 1, + /* + * DSPA_EN accelerator clk, cannot be disabled by CCF if it + * has been set by bootloader + */ + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + }, +}; + +static struct clk_regmap dspa_en_nic = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPA_CLK_EN, + .bit_idx = 0, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspa_en_nic", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspa_sel.hw + }, + .num_parents = 1, + /* + * DSPA_EN_NIC accelerator clk, cannot be disabled by CCF if it + * has been set by bootloader + */ + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + }, +}; + +static struct clk_regmap dspb_a_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPB_CLK_CTRL0, + .mask = 0x7, + .shift = 10, + .table = mux_table_dsp_ab, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspb_a_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = dsp_ab_parent_data, + .num_parents = ARRAY_SIZE(dsp_ab_parent_data), + /* DSPB_A clk parent should be set statically from dt */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap dspb_a_div = { + .data = &(struct clk_regmap_div_data){ + .offset = DSPB_CLK_CTRL0, + .shift = 0, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspb_a_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspb_a_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspb_a = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPB_CLK_CTRL0, + .bit_idx = 13, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspb_a", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspb_a_div.hw + }, + .num_parents = 1, + /* + * DSPB_A accelerator clk, cannot be disabled by CCF if it + * has been set by bootloader + */ + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + }, +}; + +static struct clk_regmap dspb_b_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPB_CLK_CTRL0, + .mask = 0x7, + .shift = 26, + .table = mux_table_dsp_ab, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspb_b_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = dsp_ab_parent_data, + .num_parents = ARRAY_SIZE(dsp_ab_parent_data), + /* DSPB_B clk parent should be set statically from dt */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap dspb_b_div = { + .data = &(struct clk_regmap_div_data){ + .offset = DSPB_CLK_CTRL0, + .shift = 16, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspb_b_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspb_b_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspb_b = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPB_CLK_CTRL0, + .bit_idx = 29, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspb_b", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspb_b_div.hw + }, + .num_parents = 1, + /* + * DSPB_B accelerator clk, cannot be disabled by CCF if it + * has been set by bootloader + */ + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + }, +}; + +static struct clk_regmap dspb_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPB_CLK_CTRL0, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspb_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspb_a.hw, + &dspb_b.hw, + }, + .num_parents = 2, + /* DSPB clk parent should be set statically from dt */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap dspb_en = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPB_CLK_EN, + .bit_idx = 1, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspb_en", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspb_sel.hw + }, + .num_parents = 1, + /* + * DSPB_EN accelerator clk, cannot be disabled by CCF if it + * has been set by bootloader + */ + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + }, +}; + +static struct clk_regmap dspb_en_nic = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPB_CLK_EN, + .bit_idx = 0, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspb_en_nic", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspb_sel.hw + }, + .num_parents = 1, + /* + * DSPB_EN_NIC accelerator clk, cannot be disabled by CCF if it + * has been set by bootloader + */ + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + }, +}; + +static struct clk_regmap clk_24m = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLK12_24_CTRL, + .bit_idx = 11, + }, + .hw.init = &(struct clk_init_data) { + .name = "24m", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor clk_24m_div2 = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "24m_div2", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &clk_24m.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap clk_12m = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLK12_24_CTRL, + .bit_idx = 10, + }, + .hw.init = &(struct clk_init_data) { + .name = "12m", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &clk_24m_div2.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div2_divn_pre = { + .data = &(struct clk_regmap_div_data){ + .offset = CLK12_24_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2_divn_pre", + .ops = &clk_regmap_divider_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "fclk_div2", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div2_divn = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLK12_24_CTRL, + .bit_idx = 12, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2_divn", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &fclk_div2_divn_pre.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* + * the index 2 is sys_pll_div16, it will be completed in the CPU clock ctrl, + * the index 4 is the clock measurement source, it relies on + * the clock measurement register configuration. + */ +static u32 gen_table[] = { 0, 1, 3, 5, 6, 7, 8 }; +static const struct clk_parent_data gen_parent_data[] = { + { .fw_name = "xtal", }, + { .hw = &rtc.hw }, + { .fw_name = "hifi_pll", }, + { .fw_name = "fclk_div2", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "fclk_div7", }, +}; + +static struct clk_regmap gen_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = GEN_CLK_CTRL, + .mask = 0xf, + .shift = 12, + .table = gen_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "gen_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = gen_parent_data, + .num_parents = ARRAY_SIZE(gen_parent_data), + }, +}; + +static struct clk_regmap gen_div = { + .data = &(struct clk_regmap_div_data){ + .offset = GEN_CLK_CTRL, + .shift = 0, + .width = 11, + }, + .hw.init = &(struct clk_init_data){ + .name = "gen_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &gen_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap gen = { + .data = &(struct clk_regmap_gate_data){ + .offset = GEN_CLK_CTRL, + .bit_idx = 11, + }, + .hw.init = &(struct clk_init_data) { + .name = "gen", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &gen_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap saradc_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SAR_ADC_CLK_CTRL, + .mask = 0x1, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "saradc_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", }, + { .hw = &sys.hw, }, + }, + .num_parents = 2, + }, +}; + +static struct clk_regmap saradc_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SAR_ADC_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "saradc_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &saradc_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap saradc = { + .data = &(struct clk_regmap_gate_data){ + .offset = SAR_ADC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "saradc", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &saradc_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data pwm_abcd_parents[] = { + { .fw_name = "xtal", }, + { .hw = &sys.hw }, + { .hw = &rtc.hw }, +}; + +static struct clk_regmap pwm_a_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_AB_CTRL, + .mask = 0x1, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_a_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = pwm_abcd_parents, + .num_parents = ARRAY_SIZE(pwm_abcd_parents), + }, +}; + +static struct clk_regmap pwm_a_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_AB_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_a_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_a_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_a = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_AB_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_a", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_a_div.hw + }, + .num_parents = 1, + /* + * The CPU working voltage is controlled by pwm_a + * in BL2 firmware. The clock is required by the platform + * to operate correctly. Add the CLK_IS_CRITICAL flag to + * avoid changing at runtime. + * About critical, refer to sys + */ + .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, + }, +}; + +static struct clk_regmap pwm_b_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_AB_CTRL, + .mask = 0x1, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_b_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = pwm_abcd_parents, + .num_parents = ARRAY_SIZE(pwm_abcd_parents), + }, +}; + +static struct clk_regmap pwm_b_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_AB_CTRL, + .shift = 16, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_b_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_b_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_b = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_AB_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_b", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_b_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_c_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_CD_CTRL, + .mask = 0x1, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_c_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = pwm_abcd_parents, + .num_parents = ARRAY_SIZE(pwm_abcd_parents), + }, +}; + +static struct clk_regmap pwm_c_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_CD_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_c_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_c_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_c = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_CD_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_c", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_c_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_d_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_CD_CTRL, + .mask = 0x1, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_d_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = pwm_abcd_parents, + .num_parents = ARRAY_SIZE(pwm_abcd_parents), + }, +}; + +static struct clk_regmap pwm_d_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_CD_CTRL, + .shift = 16, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_d_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_d_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_d = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_CD_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_d", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_d_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data pwm_ef_parents[] = { + { .fw_name = "xtal", }, + { .hw = &sys.hw }, + { .fw_name = "fclk_div5", }, + { .hw = &rtc.hw }, +}; + +static struct clk_regmap pwm_e_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_EF_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_e_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = pwm_ef_parents, + .num_parents = ARRAY_SIZE(pwm_ef_parents), + }, +}; + +static struct clk_regmap pwm_e_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_EF_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_e_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_e_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_e = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_EF_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_e", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_e_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_f_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_EF_CTRL, + .mask = 0x3, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_f_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = pwm_ef_parents, + .num_parents = ARRAY_SIZE(pwm_ef_parents), + }, +}; + +static struct clk_regmap pwm_f_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_EF_CTRL, + .shift = 16, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_f_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_f_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_f = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_EF_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_f", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_f_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* + * spicc clk + * fdiv2 |\ |\ _____ + * ---------| |---DIV--| | | | spicc out + * ---------| | | |-----|GATE |--------- + * ..... |/ | / |_____| + * --------------------|/ + * 24M + */ +static const struct clk_parent_data spicc_spifc_parents[] = { + { .fw_name = "fclk_div2"}, + { .fw_name = "fclk_div3"}, + { .fw_name = "fclk_div5"}, + { .fw_name = "hifi_pll" }, +}; + +static struct clk_regmap spicc_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SPICC_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "spicc_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = spicc_spifc_parents, + .num_parents = ARRAY_SIZE(spicc_spifc_parents), + }, +}; + +static struct clk_regmap spicc_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SPICC_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "spicc_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &spicc_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap spicc_sel2 = { + .data = &(struct clk_regmap_mux_data){ + .offset = SPICC_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "spicc_sel2", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .hw = &spicc_div.hw }, + { .fw_name = "xtal", }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap spicc = { + .data = &(struct clk_regmap_gate_data){ + .offset = SPICC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "spicc", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &spicc_sel2.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap ts_div = { + .data = &(struct clk_regmap_div_data){ + .offset = TS_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "ts_div", + .ops = &clk_regmap_divider_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap ts = { + .data = &(struct clk_regmap_gate_data){ + .offset = TS_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "ts", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &ts_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap spifc_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SPIFC_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "spifc_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = spicc_spifc_parents, + .num_parents = ARRAY_SIZE(spicc_spifc_parents), + }, +}; + +static struct clk_regmap spifc_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SPIFC_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "spifc_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &spifc_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap spifc_sel2 = { + .data = &(struct clk_regmap_mux_data){ + .offset = SPIFC_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "spifc_sel2", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .hw = &spifc_div.hw }, + { .fw_name = "xtal", }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap spifc = { + .data = &(struct clk_regmap_gate_data){ + .offset = SPIFC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "spifc", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &spifc_sel2.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data usb_bus_parents[] = { + { .fw_name = "xtal", }, + { .hw = &sys.hw }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, +}; + +static struct clk_regmap usb_bus_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = USB_BUSCLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "usb_bus_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = usb_bus_parents, + .num_parents = ARRAY_SIZE(usb_bus_parents), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap usb_bus_div = { + .data = &(struct clk_regmap_div_data){ + .offset = USB_BUSCLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "usb_bus_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &usb_bus_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap usb_bus = { + .data = &(struct clk_regmap_gate_data){ + .offset = USB_BUSCLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "usb_bus", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &usb_bus_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data sd_emmc_psram_dmc_parents[] = { + { .fw_name = "fclk_div2", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "hifi_pll", }, +}; + +static struct clk_regmap sd_emmc_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SD_EMMC_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "sd_emmc_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = sd_emmc_psram_dmc_parents, + .num_parents = ARRAY_SIZE(sd_emmc_psram_dmc_parents), + }, +}; + +static struct clk_regmap sd_emmc_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SD_EMMC_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "sd_emmc_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &sd_emmc_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap sd_emmc_sel2 = { + .data = &(struct clk_regmap_mux_data){ + .offset = SD_EMMC_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "sd_emmc_sel2", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .hw = &sd_emmc_div.hw }, + { .fw_name = "xtal", }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap sd_emmc = { + .data = &(struct clk_regmap_gate_data){ + .offset = SD_EMMC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "sd_emmc", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &sd_emmc_sel2.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap psram_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PSRAM_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "psram_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = sd_emmc_psram_dmc_parents, + .num_parents = ARRAY_SIZE(sd_emmc_psram_dmc_parents), + }, +}; + +static struct clk_regmap psram_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PSRAM_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "psram_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &psram_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap psram_sel2 = { + .data = &(struct clk_regmap_mux_data){ + .offset = PSRAM_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "psram_sel2", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .hw = &psram_div.hw }, + { .fw_name = "xtal", }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap psram = { + .data = &(struct clk_regmap_gate_data){ + .offset = PSRAM_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "psram", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &psram_sel2.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dmc_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DMC_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "dmc_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = sd_emmc_psram_dmc_parents, + .num_parents = ARRAY_SIZE(sd_emmc_psram_dmc_parents), + }, +}; + +static struct clk_regmap dmc_div = { + .data = &(struct clk_regmap_div_data){ + .offset = DMC_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "dmc_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &dmc_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dmc_sel2 = { + .data = &(struct clk_regmap_mux_data){ + .offset = DMC_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "dmc_sel2", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .hw = &dmc_div.hw }, + { .fw_name = "xtal", }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dmc = { + .data = &(struct clk_regmap_gate_data){ + .offset = DMC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "dmc", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &dmc_sel2.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap ceca_32k_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = CECA_CLK_CTRL0, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data) { + .name = "ceca_32k_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap ceca_32k_div = { + .data = &(struct meson_clk_dualdiv_data){ + .n1 = { + .reg_off = CECA_CLK_CTRL0, + .shift = 0, + .width = 12, + }, + .n2 = { + .reg_off = CECA_CLK_CTRL0, + .shift = 12, + .width = 12, + }, + .m1 = { + .reg_off = CECA_CLK_CTRL1, + .shift = 0, + .width = 12, + }, + .m2 = { + .reg_off = CECA_CLK_CTRL1, + .shift = 12, + .width = 12, + }, + .dual = { + .reg_off = CECA_CLK_CTRL0, + .shift = 28, + .width = 1, + }, + .table = clk_32k_div_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "ceca_32k_div", + .ops = &meson_clk_dualdiv_ops, + .parent_hws = (const struct clk_hw *[]) { + &ceca_32k_in.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap ceca_32k_sel_pre = { + .data = &(struct clk_regmap_mux_data) { + .offset = CECA_CLK_CTRL1, + .mask = 0x1, + .shift = 24, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "ceca_32k_sel_pre", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &ceca_32k_div.hw, + &ceca_32k_in.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap ceca_32k_sel = { + .data = &(struct clk_regmap_mux_data) { + .offset = CECA_CLK_CTRL1, + .mask = 0x1, + .shift = 31, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "ceca_32k_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &ceca_32k_sel_pre.hw, + &rtc.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap ceca_32k_out = { + .data = &(struct clk_regmap_gate_data){ + .offset = CECA_CLK_CTRL0, + .bit_idx = 30, + }, + .hw.init = &(struct clk_init_data){ + .name = "ceca_32k_out", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &ceca_32k_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap cecb_32k_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = CECB_CLK_CTRL0, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data) { + .name = "cecb_32k_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap cecb_32k_div = { + .data = &(struct meson_clk_dualdiv_data){ + .n1 = { + .reg_off = CECB_CLK_CTRL0, + .shift = 0, + .width = 12, + }, + .n2 = { + .reg_off = CECB_CLK_CTRL0, + .shift = 12, + .width = 12, + }, + .m1 = { + .reg_off = CECB_CLK_CTRL1, + .shift = 0, + .width = 12, + }, + .m2 = { + .reg_off = CECB_CLK_CTRL1, + .shift = 12, + .width = 12, + }, + .dual = { + .reg_off = CECB_CLK_CTRL0, + .shift = 28, + .width = 1, + }, + .table = clk_32k_div_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "cecb_32k_div", + .ops = &meson_clk_dualdiv_ops, + .parent_hws = (const struct clk_hw *[]) { + &cecb_32k_in.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap cecb_32k_sel_pre = { + .data = &(struct clk_regmap_mux_data) { + .offset = CECB_CLK_CTRL1, + .mask = 0x1, + .shift = 24, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "cecb_32k_sel_pre", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &cecb_32k_div.hw, + &cecb_32k_in.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap cecb_32k_sel = { + .data = &(struct clk_regmap_mux_data) { + .offset = CECB_CLK_CTRL1, + .mask = 0x1, + .shift = 31, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "cecb_32k_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &cecb_32k_sel_pre.hw, + &rtc.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap cecb_32k_out = { + .data = &(struct clk_regmap_gate_data){ + .offset = CECB_CLK_CTRL0, + .bit_idx = 30, + }, + .hw.init = &(struct clk_init_data){ + .name = "cecb_32k_out", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &cecb_32k_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +#define MESON_GATE(_name, _reg, _bit) \ + MESON_PCLK(_name, _reg, _bit, &sys.hw) + +static MESON_GATE(clktree, SYS_CLK_EN0, 0); +static MESON_GATE(reset_ctrl, SYS_CLK_EN0, 1); +static MESON_GATE(analog_ctrl, SYS_CLK_EN0, 2); +static MESON_GATE(pwr_ctrl, SYS_CLK_EN0, 3); +static MESON_GATE(pad_ctrl, SYS_CLK_EN0, 4); +static MESON_GATE(sys_ctrl, SYS_CLK_EN0, 5); +static MESON_GATE(temp_sensor, SYS_CLK_EN0, 6); +static MESON_GATE(am2axi_dev, SYS_CLK_EN0, 7); +static MESON_GATE(spicc_b, SYS_CLK_EN0, 8); +static MESON_GATE(spicc_a, SYS_CLK_EN0, 9); +static MESON_GATE(msr, SYS_CLK_EN0, 10); +static MESON_GATE(audio, SYS_CLK_EN0, 11); +static MESON_GATE(jtag_ctrl, SYS_CLK_EN0, 12); +static MESON_GATE(saradc_en, SYS_CLK_EN0, 13); +static MESON_GATE(pwm_ef, SYS_CLK_EN0, 14); +static MESON_GATE(pwm_cd, SYS_CLK_EN0, 15); +static MESON_GATE(pwm_ab, SYS_CLK_EN0, 16); +static MESON_GATE(cec, SYS_CLK_EN0, 17); +static MESON_GATE(i2c_s, SYS_CLK_EN0, 18); +static MESON_GATE(ir_ctrl, SYS_CLK_EN0, 19); +static MESON_GATE(i2c_m_d, SYS_CLK_EN0, 20); +static MESON_GATE(i2c_m_c, SYS_CLK_EN0, 21); +static MESON_GATE(i2c_m_b, SYS_CLK_EN0, 22); +static MESON_GATE(i2c_m_a, SYS_CLK_EN0, 23); +static MESON_GATE(acodec, SYS_CLK_EN0, 24); +static MESON_GATE(otp, SYS_CLK_EN0, 25); +static MESON_GATE(sd_emmc_a, SYS_CLK_EN0, 26); +static MESON_GATE(usb_phy, SYS_CLK_EN0, 27); +static MESON_GATE(usb_ctrl, SYS_CLK_EN0, 28); +static MESON_GATE(sys_dspb, SYS_CLK_EN0, 29); +static MESON_GATE(sys_dspa, SYS_CLK_EN0, 30); +static MESON_GATE(dma, SYS_CLK_EN0, 31); +static MESON_GATE(irq_ctrl, SYS_CLK_EN1, 0); +static MESON_GATE(nic, SYS_CLK_EN1, 1); +static MESON_GATE(gic, SYS_CLK_EN1, 2); +static MESON_GATE(uart_c, SYS_CLK_EN1, 3); +static MESON_GATE(uart_b, SYS_CLK_EN1, 4); +static MESON_GATE(uart_a, SYS_CLK_EN1, 5); +static MESON_GATE(sys_psram, SYS_CLK_EN1, 6); +static MESON_GATE(rsa, SYS_CLK_EN1, 8); +static MESON_GATE(coresight, SYS_CLK_EN1, 9); +static MESON_GATE(am2axi_vad, AXI_CLK_EN, 0); +static MESON_GATE(audio_vad, AXI_CLK_EN, 1); +static MESON_GATE(axi_dmc, AXI_CLK_EN, 3); +static MESON_GATE(axi_psram, AXI_CLK_EN, 4); +static MESON_GATE(ramb, AXI_CLK_EN, 5); +static MESON_GATE(rama, AXI_CLK_EN, 6); +static MESON_GATE(axi_spifc, AXI_CLK_EN, 7); +static MESON_GATE(axi_nic, AXI_CLK_EN, 8); +static MESON_GATE(axi_dma, AXI_CLK_EN, 9); +static MESON_GATE(cpu_ctrl, AXI_CLK_EN, 10); +static MESON_GATE(rom, AXI_CLK_EN, 11); +static MESON_GATE(prod_i2c, AXI_CLK_EN, 12); + +/* Array of all clocks provided by this provider */ +static struct clk_hw_onecell_data a1_periphs_hw_onecell_data = { + .hws = { + [CLKID_XTAL_IN] = &xtal_in.hw, + [CLKID_FIXPLL_IN] = &fixpll_in.hw, + [CLKID_USB_PHY_IN] = &usb_phy_in.hw, + [CLKID_USB_CTRL_IN] = &usb_ctrl_in.hw, + [CLKID_HIFIPLL_IN] = &hifipll_in.hw, + [CLKID_SYSPLL_IN] = &syspll_in.hw, + [CLKID_DDS_IN] = &dds_in.hw, + [CLKID_SYS] = &sys.hw, + [CLKID_CLKTREE] = &clktree.hw, + [CLKID_RESET_CTRL] = &reset_ctrl.hw, + [CLKID_ANALOG_CTRL] = &analog_ctrl.hw, + [CLKID_PWR_CTRL] = &pwr_ctrl.hw, + [CLKID_PAD_CTRL] = &pad_ctrl.hw, + [CLKID_SYS_CTRL] = &sys_ctrl.hw, + [CLKID_TEMP_SENSOR] = &temp_sensor.hw, + [CLKID_AM2AXI_DIV] = &am2axi_dev.hw, + [CLKID_SPICC_B] = &spicc_b.hw, + [CLKID_SPICC_A] = &spicc_a.hw, + [CLKID_MSR] = &msr.hw, + [CLKID_AUDIO] = &audio.hw, + [CLKID_JTAG_CTRL] = &jtag_ctrl.hw, + [CLKID_SARADC_EN] = &saradc_en.hw, + [CLKID_PWM_EF] = &pwm_ef.hw, + [CLKID_PWM_CD] = &pwm_cd.hw, + [CLKID_PWM_AB] = &pwm_ab.hw, + [CLKID_CEC] = &cec.hw, + [CLKID_I2C_S] = &i2c_s.hw, + [CLKID_IR_CTRL] = &ir_ctrl.hw, + [CLKID_I2C_M_D] = &i2c_m_d.hw, + [CLKID_I2C_M_C] = &i2c_m_c.hw, + [CLKID_I2C_M_B] = &i2c_m_b.hw, + [CLKID_I2C_M_A] = &i2c_m_a.hw, + [CLKID_ACODEC] = &acodec.hw, + [CLKID_OTP] = &otp.hw, + [CLKID_SD_EMMC_A] = &sd_emmc_a.hw, + [CLKID_USB_PHY] = &usb_phy.hw, + [CLKID_USB_CTRL] = &usb_ctrl.hw, + [CLKID_SYS_DSPB] = &sys_dspb.hw, + [CLKID_SYS_DSPA] = &sys_dspa.hw, + [CLKID_DMA] = &dma.hw, + [CLKID_IRQ_CTRL] = &irq_ctrl.hw, + [CLKID_NIC] = &nic.hw, + [CLKID_GIC] = &gic.hw, + [CLKID_UART_C] = &uart_c.hw, + [CLKID_UART_B] = &uart_b.hw, + [CLKID_UART_A] = &uart_a.hw, + [CLKID_SYS_PSRAM] = &sys_psram.hw, + [CLKID_RSA] = &rsa.hw, + [CLKID_CORESIGHT] = &coresight.hw, + [CLKID_AM2AXI_VAD] = &am2axi_vad.hw, + [CLKID_AUDIO_VAD] = &audio_vad.hw, + [CLKID_AXI_DMC] = &axi_dmc.hw, + [CLKID_AXI_PSRAM] = &axi_psram.hw, + [CLKID_RAMB] = &ramb.hw, + [CLKID_RAMA] = &rama.hw, + [CLKID_AXI_SPIFC] = &axi_spifc.hw, + [CLKID_AXI_NIC] = &axi_nic.hw, + [CLKID_AXI_DMA] = &axi_dma.hw, + [CLKID_CPU_CTRL] = &cpu_ctrl.hw, + [CLKID_ROM] = &rom.hw, + [CLKID_PROC_I2C] = &prod_i2c.hw, + [CLKID_DSPA_SEL] = &dspa_sel.hw, + [CLKID_DSPB_SEL] = &dspb_sel.hw, + [CLKID_DSPA_EN] = &dspa_en.hw, + [CLKID_DSPA_EN_NIC] = &dspa_en_nic.hw, + [CLKID_DSPB_EN] = &dspb_en.hw, + [CLKID_DSPB_EN_NIC] = &dspb_en_nic.hw, + [CLKID_RTC] = &rtc.hw, + [CLKID_CECA_32K] = &ceca_32k_out.hw, + [CLKID_CECB_32K] = &cecb_32k_out.hw, + [CLKID_24M] = &clk_24m.hw, + [CLKID_12M] = &clk_12m.hw, + [CLKID_FCLK_DIV2_DIVN] = &fclk_div2_divn.hw, + [CLKID_GEN] = &gen.hw, + [CLKID_SARADC_SEL] = &saradc_sel.hw, + [CLKID_SARADC] = &saradc.hw, + [CLKID_PWM_A] = &pwm_a.hw, + [CLKID_PWM_B] = &pwm_b.hw, + [CLKID_PWM_C] = &pwm_c.hw, + [CLKID_PWM_D] = &pwm_d.hw, + [CLKID_PWM_E] = &pwm_e.hw, + [CLKID_PWM_F] = &pwm_f.hw, + [CLKID_SPICC] = &spicc.hw, + [CLKID_TS] = &ts.hw, + [CLKID_SPIFC] = &spifc.hw, + [CLKID_USB_BUS] = &usb_bus.hw, + [CLKID_SD_EMMC] = &sd_emmc.hw, + [CLKID_PSRAM] = &psram.hw, + [CLKID_DMC] = &dmc.hw, + [CLKID_SYS_A_SEL] = &sys_a_sel.hw, + [CLKID_SYS_A_DIV] = &sys_a_div.hw, + [CLKID_SYS_A] = &sys_a.hw, + [CLKID_SYS_B_SEL] = &sys_b_sel.hw, + [CLKID_SYS_B_DIV] = &sys_b_div.hw, + [CLKID_SYS_B] = &sys_b.hw, + [CLKID_DSPA_A_SEL] = &dspa_a_sel.hw, + [CLKID_DSPA_A_DIV] = &dspa_a_div.hw, + [CLKID_DSPA_A] = &dspa_a.hw, + [CLKID_DSPA_B_SEL] = &dspa_b_sel.hw, + [CLKID_DSPA_B_DIV] = &dspa_b_div.hw, + [CLKID_DSPA_B] = &dspa_b.hw, + [CLKID_DSPB_A_SEL] = &dspb_a_sel.hw, + [CLKID_DSPB_A_DIV] = &dspb_a_div.hw, + [CLKID_DSPB_A] = &dspb_a.hw, + [CLKID_DSPB_B_SEL] = &dspb_b_sel.hw, + [CLKID_DSPB_B_DIV] = &dspb_b_div.hw, + [CLKID_DSPB_B] = &dspb_b.hw, + [CLKID_RTC_32K_IN] = &rtc_32k_in.hw, + [CLKID_RTC_32K_DIV] = &rtc_32k_div.hw, + [CLKID_RTC_32K_XTAL] = &rtc_32k_xtal.hw, + [CLKID_RTC_32K_SEL] = &rtc_32k_sel.hw, + [CLKID_CECB_32K_IN] = &cecb_32k_in.hw, + [CLKID_CECB_32K_DIV] = &cecb_32k_div.hw, + [CLKID_CECB_32K_SEL_PRE] = &cecb_32k_sel_pre.hw, + [CLKID_CECB_32K_SEL] = &cecb_32k_sel.hw, + [CLKID_CECA_32K_IN] = &ceca_32k_in.hw, + [CLKID_CECA_32K_DIV] = &ceca_32k_div.hw, + [CLKID_CECA_32K_SEL_PRE] = &ceca_32k_sel_pre.hw, + [CLKID_CECA_32K_SEL] = &ceca_32k_sel.hw, + [CLKID_DIV2_PRE] = &fclk_div2_divn_pre.hw, + [CLKID_24M_DIV2] = &clk_24m_div2.hw, + [CLKID_GEN_SEL] = &gen_sel.hw, + [CLKID_GEN_DIV] = &gen_div.hw, + [CLKID_SARADC_DIV] = &saradc_div.hw, + [CLKID_PWM_A_SEL] = &pwm_a_sel.hw, + [CLKID_PWM_A_DIV] = &pwm_a_div.hw, + [CLKID_PWM_B_SEL] = &pwm_b_sel.hw, + [CLKID_PWM_B_DIV] = &pwm_b_div.hw, + [CLKID_PWM_C_SEL] = &pwm_c_sel.hw, + [CLKID_PWM_C_DIV] = &pwm_c_div.hw, + [CLKID_PWM_D_SEL] = &pwm_d_sel.hw, + [CLKID_PWM_D_DIV] = &pwm_d_div.hw, + [CLKID_PWM_E_SEL] = &pwm_e_sel.hw, + [CLKID_PWM_E_DIV] = &pwm_e_div.hw, + [CLKID_PWM_F_SEL] = &pwm_f_sel.hw, + [CLKID_PWM_F_DIV] = &pwm_f_div.hw, + [CLKID_SPICC_SEL] = &spicc_sel.hw, + [CLKID_SPICC_DIV] = &spicc_div.hw, + [CLKID_SPICC_SEL2] = &spicc_sel2.hw, + [CLKID_TS_DIV] = &ts_div.hw, + [CLKID_SPIFC_SEL] = &spifc_sel.hw, + [CLKID_SPIFC_DIV] = &spifc_div.hw, + [CLKID_SPIFC_SEL2] = &spifc_sel2.hw, + [CLKID_USB_BUS_SEL] = &usb_bus_sel.hw, + [CLKID_USB_BUS_DIV] = &usb_bus_div.hw, + [CLKID_SD_EMMC_SEL] = &sd_emmc_sel.hw, + [CLKID_SD_EMMC_DIV] = &sd_emmc_div.hw, + [CLKID_SD_EMMC_SEL2] = &sd_emmc_sel2.hw, + [CLKID_PSRAM_SEL] = &psram_sel.hw, + [CLKID_PSRAM_DIV] = &psram_div.hw, + [CLKID_PSRAM_SEL2] = &psram_sel2.hw, + [CLKID_DMC_SEL] = &dmc_sel.hw, + [CLKID_DMC_DIV] = &dmc_div.hw, + [CLKID_DMC_SEL2] = &dmc_sel2.hw, + [NR_CLKS] = NULL, + }, + .num = NR_CLKS, +}; + +/* Convenience table to populate regmap in .probe */ +static struct clk_regmap *const a1_periphs_regmaps[] = { + &xtal_in, + &fixpll_in, + &usb_phy_in, + &usb_ctrl_in, + &hifipll_in, + &syspll_in, + &dds_in, + &sys, + &clktree, + &reset_ctrl, + &analog_ctrl, + &pwr_ctrl, + &pad_ctrl, + &sys_ctrl, + &temp_sensor, + &am2axi_dev, + &spicc_b, + &spicc_a, + &msr, + &audio, + &jtag_ctrl, + &saradc_en, + &pwm_ef, + &pwm_cd, + &pwm_ab, + &cec, + &i2c_s, + &ir_ctrl, + &i2c_m_d, + &i2c_m_c, + &i2c_m_b, + &i2c_m_a, + &acodec, + &otp, + &sd_emmc_a, + &usb_phy, + &usb_ctrl, + &sys_dspb, + &sys_dspa, + &dma, + &irq_ctrl, + &nic, + &gic, + &uart_c, + &uart_b, + &uart_a, + &sys_psram, + &rsa, + &coresight, + &am2axi_vad, + &audio_vad, + &axi_dmc, + &axi_psram, + &ramb, + &rama, + &axi_spifc, + &axi_nic, + &axi_dma, + &cpu_ctrl, + &rom, + &prod_i2c, + &dspa_sel, + &dspb_sel, + &dspa_en, + &dspa_en_nic, + &dspb_en, + &dspb_en_nic, + &rtc, + &ceca_32k_out, + &cecb_32k_out, + &clk_24m, + &clk_12m, + &fclk_div2_divn, + &gen, + &saradc_sel, + &saradc, + &pwm_a, + &pwm_b, + &pwm_c, + &pwm_d, + &pwm_e, + &pwm_f, + &spicc, + &ts, + &spifc, + &usb_bus, + &sd_emmc, + &psram, + &dmc, + &sys_a_sel, + &sys_a_div, + &sys_a, + &sys_b_sel, + &sys_b_div, + &sys_b, + &dspa_a_sel, + &dspa_a_div, + &dspa_a, + &dspa_b_sel, + &dspa_b_div, + &dspa_b, + &dspb_a_sel, + &dspb_a_div, + &dspb_a, + &dspb_b_sel, + &dspb_b_div, + &dspb_b, + &rtc_32k_in, + &rtc_32k_div, + &rtc_32k_xtal, + &rtc_32k_sel, + &cecb_32k_in, + &cecb_32k_div, + &cecb_32k_sel_pre, + &cecb_32k_sel, + &ceca_32k_in, + &ceca_32k_div, + &ceca_32k_sel_pre, + &ceca_32k_sel, + &fclk_div2_divn_pre, + &gen_sel, + &gen_div, + &saradc_div, + &pwm_a_sel, + &pwm_a_div, + &pwm_b_sel, + &pwm_b_div, + &pwm_c_sel, + &pwm_c_div, + &pwm_d_sel, + &pwm_d_div, + &pwm_e_sel, + &pwm_e_div, + &pwm_f_sel, + &pwm_f_div, + &spicc_sel, + &spicc_div, + &spicc_sel2, + &ts_div, + &spifc_sel, + &spifc_div, + &spifc_sel2, + &usb_bus_sel, + &usb_bus_div, + &sd_emmc_sel, + &sd_emmc_div, + &sd_emmc_sel2, + &psram_sel, + &psram_div, + &psram_sel2, + &dmc_sel, + &dmc_div, + &dmc_sel2, +}; + +static struct regmap_config a1_periphs_regmap_cfg = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static int meson_a1_periphs_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct clk_hw *hw; + void __iomem *base; + struct regmap *map; + int clkid, i, err; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return dev_err_probe(dev, PTR_ERR(base), + "can't ioremap resource\n"); + + map = devm_regmap_init_mmio(dev, base, &a1_periphs_regmap_cfg); + if (IS_ERR(map)) + return dev_err_probe(dev, PTR_ERR(map), + "can't init regmap mmio region\n"); + + /* Populate regmap for the regmap backed clocks */ + for (i = 0; i < ARRAY_SIZE(a1_periphs_regmaps); i++) + a1_periphs_regmaps[i]->map = map; + + for (clkid = 0; clkid < a1_periphs_hw_onecell_data.num; clkid++) { + hw = a1_periphs_hw_onecell_data.hws[clkid]; + err = devm_clk_hw_register(dev, hw); + if (err) + return dev_err_probe(dev, err, + "clock registration failed\n"); + } + + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, + &a1_periphs_hw_onecell_data); +} + +#ifdef CONFIG_OF +static const struct of_device_id a1_periphs_clkc_match_table[] = { + { .compatible = "amlogic,a1-clkc", }, + {}, +}; +MODULE_DEVICE_TABLE(of, a1_periphs_clkc_match_table); +#endif /* CONFIG_OF */ + +static struct platform_driver a1_periphs_clkc_driver = { + .probe = meson_a1_periphs_probe, + .driver = { + .name = "a1-clkc", + .of_match_table = of_match_ptr(a1_periphs_clkc_match_table), + }, +}; + +module_platform_driver(a1_periphs_clkc_driver); +MODULE_AUTHOR("Jian Hu "); +MODULE_AUTHOR("Dmitry Rokosov "); +MODULE_LICENSE("GPL"); diff --git a/drivers/clk/meson/a1.h b/drivers/clk/meson/a1.h new file mode 100644 index 000000000000..e0e28542c9b2 --- /dev/null +++ b/drivers/clk/meson/a1.h @@ -0,0 +1,116 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Amlogic Meson-A1 Peripheral Clock Controller internals + * + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + * Author: Jian Hu + * + * Copyright (c) 2023, SberDevices. All Rights Reserved. + * Author: Dmitry Rokosov + */ + +#ifndef __A1_H +#define __A1_H + +/* peripheral clock controller register offset */ +#define SYS_OSCIN_CTRL 0x0 +#define RTC_BY_OSCIN_CTRL0 0x4 +#define RTC_BY_OSCIN_CTRL1 0x8 +#define RTC_CTRL 0xc +#define SYS_CLK_CTRL0 0x10 +#define SYS_CLK_EN0 0x1c +#define SYS_CLK_EN1 0x20 +#define AXI_CLK_EN 0x24 +#define DSPA_CLK_EN 0x28 +#define DSPB_CLK_EN 0x2c +#define DSPA_CLK_CTRL0 0x30 +#define DSPB_CLK_CTRL0 0x34 +#define CLK12_24_CTRL 0x38 +#define GEN_CLK_CTRL 0x3c +#define SAR_ADC_CLK_CTRL 0xc0 +#define PWM_CLK_AB_CTRL 0xc4 +#define PWM_CLK_CD_CTRL 0xc8 +#define PWM_CLK_EF_CTRL 0xcc +#define SPICC_CLK_CTRL 0xd0 +#define TS_CLK_CTRL 0xd4 +#define SPIFC_CLK_CTRL 0xd8 +#define USB_BUSCLK_CTRL 0xdc +#define SD_EMMC_CLK_CTRL 0xe0 +#define CECA_CLK_CTRL0 0xe4 +#define CECA_CLK_CTRL1 0xe8 +#define CECB_CLK_CTRL0 0xec +#define CECB_CLK_CTRL1 0xf0 +#define PSRAM_CLK_CTRL 0xf4 +#define DMC_CLK_CTRL 0xf8 + +#define CLKID_XTAL_IN 0 +#define CLKID_SYS_A_SEL 89 +#define CLKID_SYS_A_DIV 90 +#define CLKID_SYS_A 91 +#define CLKID_SYS_B_SEL 92 +#define CLKID_SYS_B_DIV 93 +#define CLKID_SYS_B 94 +#define CLKID_DSPA_A_SEL 95 +#define CLKID_DSPA_A_DIV 96 +#define CLKID_DSPA_A 97 +#define CLKID_DSPA_B_SEL 98 +#define CLKID_DSPA_B_DIV 99 +#define CLKID_DSPA_B 100 +#define CLKID_DSPB_A_SEL 101 +#define CLKID_DSPB_A_DIV 102 +#define CLKID_DSPB_A 103 +#define CLKID_DSPB_B_SEL 104 +#define CLKID_DSPB_B_DIV 105 +#define CLKID_DSPB_B 106 +#define CLKID_RTC_32K_IN 107 +#define CLKID_RTC_32K_DIV 108 +#define CLKID_RTC_32K_XTAL 109 +#define CLKID_RTC_32K_SEL 110 +#define CLKID_CECB_32K_IN 111 +#define CLKID_CECB_32K_DIV 112 +#define CLKID_CECB_32K_SEL_PRE 113 +#define CLKID_CECB_32K_SEL 114 +#define CLKID_CECA_32K_IN 115 +#define CLKID_CECA_32K_DIV 116 +#define CLKID_CECA_32K_SEL_PRE 117 +#define CLKID_CECA_32K_SEL 118 +#define CLKID_DIV2_PRE 119 +#define CLKID_24M_DIV2 120 +#define CLKID_GEN_SEL 121 +#define CLKID_GEN_DIV 122 +#define CLKID_SARADC_DIV 123 +#define CLKID_PWM_A_SEL 124 +#define CLKID_PWM_A_DIV 125 +#define CLKID_PWM_B_SEL 126 +#define CLKID_PWM_B_DIV 127 +#define CLKID_PWM_C_SEL 128 +#define CLKID_PWM_C_DIV 129 +#define CLKID_PWM_D_SEL 130 +#define CLKID_PWM_D_DIV 131 +#define CLKID_PWM_E_SEL 132 +#define CLKID_PWM_E_DIV 133 +#define CLKID_PWM_F_SEL 134 +#define CLKID_PWM_F_DIV 135 +#define CLKID_SPICC_SEL 136 +#define CLKID_SPICC_DIV 137 +#define CLKID_SPICC_SEL2 138 +#define CLKID_TS_DIV 139 +#define CLKID_SPIFC_SEL 140 +#define CLKID_SPIFC_DIV 141 +#define CLKID_SPIFC_SEL2 142 +#define CLKID_USB_BUS_SEL 143 +#define CLKID_USB_BUS_DIV 144 +#define CLKID_SD_EMMC_SEL 145 +#define CLKID_SD_EMMC_DIV 146 +#define CLKID_SD_EMMC_SEL2 147 +#define CLKID_PSRAM_SEL 148 +#define CLKID_PSRAM_DIV 149 +#define CLKID_PSRAM_SEL2 150 +#define CLKID_DMC_SEL 151 +#define CLKID_DMC_DIV 152 +#define CLKID_DMC_SEL2 153 +#define NR_CLKS 154 + +#include + +#endif /* __A1_H */ From patchwork Wed Mar 1 18:37:59 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Rokosov X-Patchwork-Id: 63032 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a5d:5915:0:0:0:0:0 with SMTP id v21csp3804122wrd; Wed, 1 Mar 2023 10:51:33 -0800 (PST) X-Google-Smtp-Source: AK7set9k98x8EY6swQ+K79ltRV05qeWgsGvtXb3T9bPdZ8Omu8XWOk/ZWpZ0xwyfC/rsW1494xP9 X-Received: by 2002:a17:906:494e:b0:881:f2f:6633 with SMTP id f14-20020a170906494e00b008810f2f6633mr7101988ejt.50.1677696692976; Wed, 01 Mar 2023 10:51:32 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1677696692; cv=none; d=google.com; s=arc-20160816; b=YVnnFTJiBWPM0Hi0HLKaaJN/c+CkRYhanl9GuofIsXFNAQ0ZjSZGsoLMjRnpk9bdqV jAud2GbXIDTSH09uozO+JwKVbo7OP1OePygyScz29MonkUjgD8reEUVOol9KNfHvM6DK s+TlmrKo+CdpHfeRQUUtoFW6cZf80o/GGc4giCBrAzbRThhvRqfPVZ/Z1dmDmRJ+mO/a S419zHXnaZEL3uuZ7YYVqgKeG3cqzTCXIVasdVxIJigywBt5QPKNGhBHnRDMAD7iu69u STsS+MurDcIakaWZzv8/0pi7lSpYyO6NvnsIl28IYvTKozmYv96/RIO9DWY3YC6+imhM WxKQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=yL115kgbMbWkaM7U3vr5gbAogShZkMVE274c2zrjsaw=; b=BhD54omNKZYqjeqbYplwbTd1/gZQCYXSk9Jax78386/lmvkp8MOdMrzMf89Cu3YKNQ EtTyTJOS/SMo4sT4ZRk1IHO5O74vZBeYbf0TfbWJJOH8qqnc2DJj8KH80ybqyHuxzGd9 oT4ywVg1fRk4yIitje5HMnDBEMIVg8VnJx6Su9rTHb8boQuPE2ny5SuWPpZ/KJ6nXViF F3Cs4QELnd1uBXtb6PKtUdSxo+E/1nZr5h/aQQ2CHz5XEa2o5JXwcJXXaSnopeR7mJHp 4J7YFF9ZO53VvOMQNyL9oblM9PADmf2D7i4Zs0tpy5dqQG+Y11aH7/hYPa0+fTaIrbyS bo7Q== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@sberdevices.ru header.s=mail header.b=B3GDlAxX; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=QUARANTINE dis=NONE) header.from=sberdevices.ru Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id rl19-20020a170907217300b008d623952a0fsi5889594ejb.132.2023.03.01.10.51.10; Wed, 01 Mar 2023 10:51:32 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass header.i=@sberdevices.ru header.s=mail header.b=B3GDlAxX; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=QUARANTINE dis=NONE) header.from=sberdevices.ru Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230089AbjCASik (ORCPT + 99 others); Wed, 1 Mar 2023 13:38:40 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:45330 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229997AbjCASi2 (ORCPT ); Wed, 1 Mar 2023 13:38:28 -0500 Received: from mx.sberdevices.ru (mx.sberdevices.ru [45.89.227.171]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 7AC782D67; Wed, 1 Mar 2023 10:38:26 -0800 (PST) Received: from s-lin-edge02.sberdevices.ru (localhost [127.0.0.1]) by mx.sberdevices.ru (Postfix) with ESMTP id 210825FD7D; Wed, 1 Mar 2023 21:38:24 +0300 (MSK) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sberdevices.ru; s=mail; t=1677695904; bh=yL115kgbMbWkaM7U3vr5gbAogShZkMVE274c2zrjsaw=; h=From:To:Subject:Date:Message-ID:MIME-Version:Content-Type; b=B3GDlAxX8Fs0S7XHDLfatTT3BcPKn0wRa/4y7aAg9QeGwz3fZR5e1H4k9ps6yQ5LV x4RwIYW0I/IAbmHpno3M7bZ/duCnM3THJAKWOC9NlFBQXtJfrRxwvdpA1yd5nGToOv whtpmV/yMaQJRFA2L2FBlUzbfHXZeEjIZ2pTdgzRV3eKBlwJ1Ily2MRcfCD6YViagU esvX+ny6Oyo52F7+F1sPsC98yUqNGMGBO/FnoPQAkEFsR+kpcFZfAJDQs+Ta/I/WcG kc6EVXmnR7/t0Wt7TcyVvAsc7PZWh+sFc8UixkW6OpzHvxvMb23u5lJvzoKasGuVWD QcJlseolgnLZg== Received: from S-MS-EXCH01.sberdevices.ru (S-MS-EXCH01.sberdevices.ru [172.16.1.4]) by mx.sberdevices.ru (Postfix) with ESMTP; Wed, 1 Mar 2023 21:38:24 +0300 (MSK) From: Dmitry Rokosov To: , , , , , , , CC: , , , , , , , , Dmitry Rokosov Subject: [PATCH v9 5/5] dt-bindings: clock: meson: add A1 Peripherals clock controller bindings Date: Wed, 1 Mar 2023 21:37:59 +0300 Message-ID: <20230301183759.16163-6-ddrokosov@sberdevices.ru> X-Mailer: git-send-email 2.36.0 In-Reply-To: <20230301183759.16163-1-ddrokosov@sberdevices.ru> References: <20230301183759.16163-1-ddrokosov@sberdevices.ru> MIME-Version: 1.0 X-Originating-IP: [172.16.1.6] X-ClientProxiedBy: S-MS-EXCH01.sberdevices.ru (172.16.1.4) To S-MS-EXCH01.sberdevices.ru (172.16.1.4) X-KSMG-Rule-ID: 4 X-KSMG-Message-Action: clean X-KSMG-AntiSpam-Status: not scanned, disabled by settings X-KSMG-AntiSpam-Interceptor-Info: not scanned X-KSMG-AntiPhishing: not scanned, disabled by settings X-KSMG-AntiVirus: Kaspersky Secure Mail Gateway, version 1.1.2.30, bases: 2023/03/01 14:15:00 #20905952 X-KSMG-AntiVirus-Status: Clean, skipped X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-getmail-retrieved-from-mailbox: =?utf-8?q?INBOX?= X-GMAIL-THRID: =?utf-8?q?1759192487383607673?= X-GMAIL-MSGID: =?utf-8?q?1759192487383607673?= Add the documentation for Amlogic A1 Peripherals clock driver, and A1 Peripherals clock controller bindings. Signed-off-by: Jian Hu Signed-off-by: Dmitry Rokosov --- .../bindings/clock/amlogic,a1-clkc.yaml | 73 +++++++++++++ include/dt-bindings/clock/a1-clkc.h | 102 ++++++++++++++++++ 2 files changed, 175 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml create mode 100644 include/dt-bindings/clock/a1-clkc.h diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml new file mode 100644 index 000000000000..3dc86e912dea --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/amlogic,a1-clkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson A/C serials Peripheral Clock Control Unit + +maintainers: + - Neil Armstrong + - Jerome Brunet + - Jian Hu + - Dmitry Rokosov + +properties: + compatible: + const: amlogic,a1-clkc + + '#clock-cells': + const: 1 + + reg: + maxItems: 1 + + clocks: + items: + - description: input fixed pll div2 + - description: input fixed pll div3 + - description: input fixed pll div5 + - description: input fixed pll div7 + - description: input hifi pll + - description: input oscillator (usually at 24MHz) + + clock-names: + items: + - const: fclk_div2 + - const: fclk_div3 + - const: fclk_div5 + - const: fclk_div7 + - const: hifi_pll + - const: xtal + +required: + - compatible + - '#clock-cells' + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + apb { + #address-cells = <2>; + #size-cells = <2>; + + clock-controller@800 { + compatible = "amlogic,a1-clkc"; + reg = <0 0x800 0 0x104>; + #clock-cells = <1>; + clocks = <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_FCLK_DIV3>, + <&clkc_pll CLKID_FCLK_DIV5>, + <&clkc_pll CLKID_FCLK_DIV7>, + <&clkc_pll CLKID_HIFI_PLL>, + <&xtal>; + clock-names = "fclk_div2", "fclk_div3", + "fclk_div5", "fclk_div7", + "hifi_pll", "xtal"; + }; + }; diff --git a/include/dt-bindings/clock/a1-clkc.h b/include/dt-bindings/clock/a1-clkc.h new file mode 100644 index 000000000000..271eefb989f3 --- /dev/null +++ b/include/dt-bindings/clock/a1-clkc.h @@ -0,0 +1,102 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + * Author: Jian Hu + * + * Copyright (c) 2023, SberDevices. All Rights Reserved. + * Author: Dmitry Rokosov + */ + +#ifndef __A1_CLKC_H +#define __A1_CLKC_H + +#define CLKID_FIXPLL_IN 1 +#define CLKID_USB_PHY_IN 2 +#define CLKID_USB_CTRL_IN 3 +#define CLKID_HIFIPLL_IN 4 +#define CLKID_SYSPLL_IN 5 +#define CLKID_DDS_IN 6 +#define CLKID_SYS 7 +#define CLKID_CLKTREE 8 +#define CLKID_RESET_CTRL 9 +#define CLKID_ANALOG_CTRL 10 +#define CLKID_PWR_CTRL 11 +#define CLKID_PAD_CTRL 12 +#define CLKID_SYS_CTRL 13 +#define CLKID_TEMP_SENSOR 14 +#define CLKID_AM2AXI_DIV 15 +#define CLKID_SPICC_B 16 +#define CLKID_SPICC_A 17 +#define CLKID_MSR 18 +#define CLKID_AUDIO 19 +#define CLKID_JTAG_CTRL 20 +#define CLKID_SARADC_EN 21 +#define CLKID_PWM_EF 22 +#define CLKID_PWM_CD 23 +#define CLKID_PWM_AB 24 +#define CLKID_CEC 25 +#define CLKID_I2C_S 26 +#define CLKID_IR_CTRL 27 +#define CLKID_I2C_M_D 28 +#define CLKID_I2C_M_C 29 +#define CLKID_I2C_M_B 30 +#define CLKID_I2C_M_A 31 +#define CLKID_ACODEC 32 +#define CLKID_OTP 33 +#define CLKID_SD_EMMC_A 34 +#define CLKID_USB_PHY 35 +#define CLKID_USB_CTRL 36 +#define CLKID_SYS_DSPB 37 +#define CLKID_SYS_DSPA 38 +#define CLKID_DMA 39 +#define CLKID_IRQ_CTRL 40 +#define CLKID_NIC 41 +#define CLKID_GIC 42 +#define CLKID_UART_C 43 +#define CLKID_UART_B 44 +#define CLKID_UART_A 45 +#define CLKID_SYS_PSRAM 46 +#define CLKID_RSA 47 +#define CLKID_CORESIGHT 48 +#define CLKID_AM2AXI_VAD 49 +#define CLKID_AUDIO_VAD 50 +#define CLKID_AXI_DMC 51 +#define CLKID_AXI_PSRAM 52 +#define CLKID_RAMB 53 +#define CLKID_RAMA 54 +#define CLKID_AXI_SPIFC 55 +#define CLKID_AXI_NIC 56 +#define CLKID_AXI_DMA 57 +#define CLKID_CPU_CTRL 58 +#define CLKID_ROM 59 +#define CLKID_PROC_I2C 60 +#define CLKID_DSPA_SEL 61 +#define CLKID_DSPB_SEL 62 +#define CLKID_DSPA_EN 63 +#define CLKID_DSPA_EN_NIC 64 +#define CLKID_DSPB_EN 65 +#define CLKID_DSPB_EN_NIC 66 +#define CLKID_RTC 67 +#define CLKID_CECA_32K 68 +#define CLKID_CECB_32K 69 +#define CLKID_24M 70 +#define CLKID_12M 71 +#define CLKID_FCLK_DIV2_DIVN 72 +#define CLKID_GEN 73 +#define CLKID_SARADC_SEL 74 +#define CLKID_SARADC 75 +#define CLKID_PWM_A 76 +#define CLKID_PWM_B 77 +#define CLKID_PWM_C 78 +#define CLKID_PWM_D 79 +#define CLKID_PWM_E 80 +#define CLKID_PWM_F 81 +#define CLKID_SPICC 82 +#define CLKID_TS 83 +#define CLKID_SPIFC 84 +#define CLKID_USB_BUS 85 +#define CLKID_SD_EMMC 86 +#define CLKID_PSRAM 87 +#define CLKID_DMC 88 + +#endif /* __A1_CLKC_H */