[RFC,3/4] dma-direct: add offset to zone_dma_bits

Message ID fae5b1180161a7d8cd626a96f5df80b0a0796b8b.1703683642.git.baruch@tkos.co.il
State New
Headers
Series arm64: support DMA zone starting above 4GB |

Commit Message

Baruch Siach Dec. 27, 2023, 3:04 p.m. UTC
  Current code using zone_dma_bits assume that all addresses range in the
bits mask are suitable for DMA. For some existing platforms this
assumption is not correct. DMA range might have non zero lower limit.

Add 'zone_dma_off' for platform code to set base address for DMA zone.

Rename the dma_direct_supported() local 'min_mask' variable to better
describe its use as limit.

Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
 include/linux/dma-direct.h |  1 +
 kernel/dma/direct.c        | 10 ++++++----
 kernel/dma/pool.c          |  2 +-
 kernel/dma/swiotlb.c       |  5 +++--
 4 files changed, 11 insertions(+), 7 deletions(-)
  

Comments

Catalin Marinas Jan. 8, 2024, 5:55 p.m. UTC | #1
On Wed, Dec 27, 2023 at 05:04:27PM +0200, Baruch Siach wrote:
> Current code using zone_dma_bits assume that all addresses range in the
> bits mask are suitable for DMA. For some existing platforms this
> assumption is not correct. DMA range might have non zero lower limit.
> 
> Add 'zone_dma_off' for platform code to set base address for DMA zone.
> 
> Rename the dma_direct_supported() local 'min_mask' variable to better
> describe its use as limit.
> 
> Suggested-by: Catalin Marinas <catalin.marinas@arm.com>

When I suggested taking the DMA offsets into account, that's not exactly
what I meant. Based on patch 4, it looks like zone_dma_off is equivalent
to the lower CPU address. Let's say a system has DRAM starting at 2GB
and all 32-bit DMA-capable devices has a DMA offset of 0. We want
ZONE_DMA32 to end at 4GB rather than 6GB.

> @@ -59,7 +60,7 @@ static gfp_t dma_direct_optimal_gfp_mask(struct device *dev, u64 *phys_limit)
>  	 * zones.
>  	 */
>  	*phys_limit = dma_to_phys(dev, dma_limit);
> -	if (*phys_limit <= DMA_BIT_MASK(zone_dma_bits))
> +	if (*phys_limit <= zone_dma_off + DMA_BIT_MASK(zone_dma_bits))
>  		return GFP_DMA;
>  	if (*phys_limit <= DMA_BIT_MASK(32))
>  		return GFP_DMA32;

Ah, you ignore the zone_dma_off for 32-bit calculations. But the
argument still stands, the start of DRAM does not necessarily mean that
all non-64-bit devices have such DMA offset.

The current dma_direct_optimal_gfp_mask() confuses me a bit, I think it
gives the wrong flag if we have a zone_dma_bits of 30 and a device with
a coherent_dma_mask of 31, it incorrectly ends up with GFP_DMA32 (I'm
ignoring dma offsets in this example). Luckily I don't think we have any
set up where this would fail. Basically if *phys_limit is strictly
smaller than DMA_BIT_MASK(32), we want GFP_DMA rather than GFP_DMA32
even if it is larger than DMA_BIT_MASK(zone_dma_bits).

Anyway, current mainline assumes that DMA_BIT_MASK(zone_dma_bits) and
DMA_BIT_MASK(32) are CPU addresses. The problem is that we may have the
start of RAM well above 4GB and neither ZONE_DMA nor ZONE_DMA32 upper
limits would be a power-of-two. We could change the DMA_BIT_MASK(...) to
be DMA address limits and we end up with something like:

static gfp_t dma_direct_optimal_gfp_mask(struct device *dev, u64 *phys_limit)
{
	u64 dma_limit = min_not_zero(
		dev->coherent_dma_mask,
		dev->bus_dma_limit);
	u64 dma32_limit = dma_to_phys(dev, DMA_BIT_MASK(32));

	*phys_limit = dma_to_phys(dev, dma_limit);
	if (*phys_limit > dma_limit)
		return 0;
	if (*phys_limit = dma32_limit)
		return GFP_DMA32;
	return GFP_DMA;
}

The alternative is to get rid of the *_bits variants and go for
zone_dma_limit and zone_dma32_limit in the generic code. For most
architectures they would match the current DMA_BIT_MASK(32) etc. but
arm64 would be able to set some higher values.

My preference would be to go for zone_dma{,32}_limit, it's easier to
change all the places where DMA_BIT_MASK({zone_dma_bits,32}) is used.
  
Baruch Siach Jan. 9, 2024, 10:03 a.m. UTC | #2
Hi Catalin,

On Mon, Jan 08 2024, Catalin Marinas wrote:
> On Wed, Dec 27, 2023 at 05:04:27PM +0200, Baruch Siach wrote:
>> Current code using zone_dma_bits assume that all addresses range in the
>> bits mask are suitable for DMA. For some existing platforms this
>> assumption is not correct. DMA range might have non zero lower limit.
>> 
>> Add 'zone_dma_off' for platform code to set base address for DMA zone.
>> 
>> Rename the dma_direct_supported() local 'min_mask' variable to better
>> describe its use as limit.
>> 
>> Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
>
> When I suggested taking the DMA offsets into account, that's not exactly
> what I meant. Based on patch 4, it looks like zone_dma_off is equivalent
> to the lower CPU address. Let's say a system has DRAM starting at 2GB
> and all 32-bit DMA-capable devices has a DMA offset of 0. We want
> ZONE_DMA32 to end at 4GB rather than 6GB.

Patch 4 sets zone_dma_off to the lower limit from 'dma-ranges' property
that determines zone_dma_bits. This is not necessarily equivalent to
start of DRAM, though it happens to be that way on my platform.

>> @@ -59,7 +60,7 @@ static gfp_t dma_direct_optimal_gfp_mask(struct device *dev, u64 *phys_limit)
>>  	 * zones.
>>  	 */
>>  	*phys_limit = dma_to_phys(dev, dma_limit);
>> -	if (*phys_limit <= DMA_BIT_MASK(zone_dma_bits))
>> +	if (*phys_limit <= zone_dma_off + DMA_BIT_MASK(zone_dma_bits))
>>  		return GFP_DMA;
>>  	if (*phys_limit <= DMA_BIT_MASK(32))
>>  		return GFP_DMA32;
>
> Ah, you ignore the zone_dma_off for 32-bit calculations. But the
> argument still stands, the start of DRAM does not necessarily mean that
> all non-64-bit devices have such DMA offset.
>
> The current dma_direct_optimal_gfp_mask() confuses me a bit, I think it
> gives the wrong flag if we have a zone_dma_bits of 30 and a device with
> a coherent_dma_mask of 31, it incorrectly ends up with GFP_DMA32 (I'm
> ignoring dma offsets in this example). Luckily I don't think we have any
> set up where this would fail. Basically if *phys_limit is strictly
> smaller than DMA_BIT_MASK(32), we want GFP_DMA rather than GFP_DMA32
> even if it is larger than DMA_BIT_MASK(zone_dma_bits).
>
> Anyway, current mainline assumes that DMA_BIT_MASK(zone_dma_bits) and
> DMA_BIT_MASK(32) are CPU addresses. The problem is that we may have the
> start of RAM well above 4GB and neither ZONE_DMA nor ZONE_DMA32 upper
> limits would be a power-of-two. We could change the DMA_BIT_MASK(...) to
> be DMA address limits and we end up with something like:
>
> static gfp_t dma_direct_optimal_gfp_mask(struct device *dev, u64 *phys_limit)
> {
> 	u64 dma_limit = min_not_zero(
> 		dev->coherent_dma_mask,
> 		dev->bus_dma_limit);
> 	u64 dma32_limit = dma_to_phys(dev, DMA_BIT_MASK(32));
>
> 	*phys_limit = dma_to_phys(dev, dma_limit);
> 	if (*phys_limit > dma_limit)
> 		return 0;
> 	if (*phys_limit = dma32_limit)
> 		return GFP_DMA32;
> 	return GFP_DMA;
> }
>
> The alternative is to get rid of the *_bits variants and go for
> zone_dma_limit and zone_dma32_limit in the generic code. For most
> architectures they would match the current DMA_BIT_MASK(32) etc. but
> arm64 would be able to set some higher values.
>
> My preference would be to go for zone_dma{,32}_limit, it's easier to
> change all the places where DMA_BIT_MASK({zone_dma_bits,32}) is used.

Sounds good to me.

Thanks for your review of this confusing piece of code.

baruch
  
Catalin Marinas Jan. 9, 2024, 10:54 a.m. UTC | #3
On Tue, Jan 09, 2024 at 12:03:43PM +0200, Baruch Siach wrote:
> On Mon, Jan 08 2024, Catalin Marinas wrote:
> > On Wed, Dec 27, 2023 at 05:04:27PM +0200, Baruch Siach wrote:
> >> Current code using zone_dma_bits assume that all addresses range in the
> >> bits mask are suitable for DMA. For some existing platforms this
> >> assumption is not correct. DMA range might have non zero lower limit.
> >> 
> >> Add 'zone_dma_off' for platform code to set base address for DMA zone.
> >> 
> >> Rename the dma_direct_supported() local 'min_mask' variable to better
> >> describe its use as limit.
> >> 
> >> Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
> >
> > When I suggested taking the DMA offsets into account, that's not exactly
> > what I meant. Based on patch 4, it looks like zone_dma_off is equivalent
> > to the lower CPU address. Let's say a system has DRAM starting at 2GB
> > and all 32-bit DMA-capable devices has a DMA offset of 0. We want
> > ZONE_DMA32 to end at 4GB rather than 6GB.
> 
> Patch 4 sets zone_dma_off to the lower limit from 'dma-ranges' property
> that determines zone_dma_bits. This is not necessarily equivalent to
> start of DRAM, though it happens to be that way on my platform.

A bit better but it still assumes that all devices have the same DMA
offset which may not be the case.
  
Baruch Siach Jan. 9, 2024, 1:54 p.m. UTC | #4
Hi Catalin,

On Tue, Jan 09 2024, Catalin Marinas wrote:
> On Tue, Jan 09, 2024 at 12:03:43PM +0200, Baruch Siach wrote:
>> On Mon, Jan 08 2024, Catalin Marinas wrote:
>> > On Wed, Dec 27, 2023 at 05:04:27PM +0200, Baruch Siach wrote:
>> >> Current code using zone_dma_bits assume that all addresses range in the
>> >> bits mask are suitable for DMA. For some existing platforms this
>> >> assumption is not correct. DMA range might have non zero lower limit.
>> >> 
>> >> Add 'zone_dma_off' for platform code to set base address for DMA zone.
>> >> 
>> >> Rename the dma_direct_supported() local 'min_mask' variable to better
>> >> describe its use as limit.
>> >> 
>> >> Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
>> >
>> > When I suggested taking the DMA offsets into account, that's not exactly
>> > what I meant. Based on patch 4, it looks like zone_dma_off is equivalent
>> > to the lower CPU address. Let's say a system has DRAM starting at 2GB
>> > and all 32-bit DMA-capable devices has a DMA offset of 0. We want
>> > ZONE_DMA32 to end at 4GB rather than 6GB.
>> 
>> Patch 4 sets zone_dma_off to the lower limit from 'dma-ranges' property
>> that determines zone_dma_bits. This is not necessarily equivalent to
>> start of DRAM, though it happens to be that way on my platform.
>
> A bit better but it still assumes that all devices have the same DMA
> offset which may not be the case.

Current code calculates zone_dma_bits based on the lowest high limit of
all 'dma-ranges' properties. The assumption appears to be that this
limit fits all devices. This series does not change this assumption. It
only extends the logic to the lower limit of the "winning" 'dma-ranges'
to set the base address for DMA zone.

Moving to dma_zone_limit would not change that logic. Unless I'm missing
something.

Breaking the "one DMA zone fits all devices" assumption as Petr
suggested is a much larger change.

baruch
  
Catalin Marinas Jan. 9, 2024, 5:51 p.m. UTC | #5
On Tue, Jan 09, 2024 at 03:54:13PM +0200, Baruch Siach wrote:
> On Tue, Jan 09 2024, Catalin Marinas wrote:
> > On Tue, Jan 09, 2024 at 12:03:43PM +0200, Baruch Siach wrote:
> >> On Mon, Jan 08 2024, Catalin Marinas wrote:
> >> > On Wed, Dec 27, 2023 at 05:04:27PM +0200, Baruch Siach wrote:
> >> >> Current code using zone_dma_bits assume that all addresses range in the
> >> >> bits mask are suitable for DMA. For some existing platforms this
> >> >> assumption is not correct. DMA range might have non zero lower limit.
> >> >> 
> >> >> Add 'zone_dma_off' for platform code to set base address for DMA zone.
> >> >> 
> >> >> Rename the dma_direct_supported() local 'min_mask' variable to better
> >> >> describe its use as limit.
> >> >> 
> >> >> Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
> >> >
> >> > When I suggested taking the DMA offsets into account, that's not exactly
> >> > what I meant. Based on patch 4, it looks like zone_dma_off is equivalent
> >> > to the lower CPU address. Let's say a system has DRAM starting at 2GB
> >> > and all 32-bit DMA-capable devices has a DMA offset of 0. We want
> >> > ZONE_DMA32 to end at 4GB rather than 6GB.
> >> 
> >> Patch 4 sets zone_dma_off to the lower limit from 'dma-ranges' property
> >> that determines zone_dma_bits. This is not necessarily equivalent to
> >> start of DRAM, though it happens to be that way on my platform.
> >
> > A bit better but it still assumes that all devices have the same DMA
> > offset which may not be the case.
> 
> Current code calculates zone_dma_bits based on the lowest high limit of
> all 'dma-ranges' properties. The assumption appears to be that this
> limit fits all devices. This series does not change this assumption. It
> only extends the logic to the lower limit of the "winning" 'dma-ranges'
> to set the base address for DMA zone.
> 
> Moving to dma_zone_limit would not change that logic. Unless I'm missing
> something.

Indeed, the logic here stays the same. What doesn't work currently is
that we use fls64() of this address and we also cap it to 32 in the
arm64 zone_sizes_init(). On a system where RAM starts at 4GB and we have
a (for example) 30-bit device, zone_dma_bits ends up as 32 (fls64(5G)).
With your patch, IIUC, zone_dma_off would be 4GB in such scenario and
adding DMA_BIT_MASK(zone_dma_bits) to it results in 8GB, not the 5GB
limit that we actually need (the first GB of the RAM).

> Breaking the "one DMA zone fits all devices" assumption as Petr
> suggested is a much larger change.

I don't think we should go this way, we just need to make sure the DMA
zone does not extend above the lowest upper limit of the cpu addresses
in the 'dma-ranges' property. Basically what
of_dma_get_max_cpu_address() gives us but without any capping or
conversion into a power of two. This should cover those sub-32-bit
devices.

See the partial patch below, not really tested (and it breaks powerpc,
s390) but it's easier to discuss on code. In addition, we need to figure
out what to do with ZONE_DMA32 in such case. Do we consider the first
4GB of the RAM or we just don't bother with setting up this zone if the
RAM starts above 4GB, only rely on ZONE_DMA? I'd go with the latter but
needs some thinking.

diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 74c1db8ce271..0a15628ece7e 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -113,36 +113,24 @@ static void __init arch_reserve_crashkernel(void)
 				    low_size, high);
 }
 
-/*
- * Return the maximum physical address for a zone accessible by the given bits
- * limit. If DRAM starts above 32-bit, expand the zone to the maximum
- * available memory, otherwise cap it at 32-bit.
- */
-static phys_addr_t __init max_zone_phys(unsigned int zone_bits)
+static phys_addr_t __init max_zone_phys(phys_addr_t zone_mask)
 {
-	phys_addr_t zone_mask = DMA_BIT_MASK(zone_bits);
-	phys_addr_t phys_start = memblock_start_of_DRAM();
-
-	if (phys_start > U32_MAX)
-		zone_mask = PHYS_ADDR_MAX;
-	else if (phys_start > zone_mask)
-		zone_mask = U32_MAX;
-
 	return min(zone_mask, memblock_end_of_DRAM() - 1) + 1;
 }
 
 static void __init zone_sizes_init(void)
 {
 	unsigned long max_zone_pfns[MAX_NR_ZONES]  = {0};
-	unsigned int __maybe_unused acpi_zone_dma_bits;
-	unsigned int __maybe_unused dt_zone_dma_bits;
-	phys_addr_t __maybe_unused dma32_phys_limit = max_zone_phys(32);
+	phys_addr_t __maybe_unused acpi_zone_dma_limit;
+	phys_addr_t __maybe_unused dt_zone_dma_limit;
+	phys_addr_t __maybe_unused dma32_phys_limit =
+		max_zone_phys(DMA_BIT_MASK(32));
 
 #ifdef CONFIG_ZONE_DMA
-	acpi_zone_dma_bits = fls64(acpi_iort_dma_get_max_cpu_address());
-	dt_zone_dma_bits = fls64(of_dma_get_max_cpu_address(NULL));
-	zone_dma_bits = min3(32U, dt_zone_dma_bits, acpi_zone_dma_bits);
-	arm64_dma_phys_limit = max_zone_phys(zone_dma_bits);
+	acpi_zone_dma_limit = acpi_iort_dma_get_max_cpu_address();
+	dt_zone_dma_limit = of_dma_get_max_cpu_address(NULL);
+	zone_dma_limit = min(dt_zone_dma_limit, acpi_zone_dma_limit);
+	arm64_dma_phys_limit = max_zone_phys(zone_dma_limit);
 	max_zone_pfns[ZONE_DMA] = PFN_DOWN(arm64_dma_phys_limit);
 #endif
 #ifdef CONFIG_ZONE_DMA32
diff --git a/include/linux/dma-direct.h b/include/linux/dma-direct.h
index 18aade195884..f55de778612b 100644
--- a/include/linux/dma-direct.h
+++ b/include/linux/dma-direct.h
@@ -12,7 +12,7 @@
 #include <linux/mem_encrypt.h>
 #include <linux/swiotlb.h>
 
-extern unsigned int zone_dma_bits;
+extern phys_addr_t zone_dma_limit;
 
 /*
  * Record the mapping of CPU physical to DMA addresses for a given region.
diff --git a/kernel/dma/direct.c b/kernel/dma/direct.c
index 73c95815789a..1e12c593b6f3 100644
--- a/kernel/dma/direct.c
+++ b/kernel/dma/direct.c
@@ -20,7 +20,7 @@
  * it for entirely different regions. In that case the arch code needs to
  * override the variable below for dma-direct to work properly.
  */
-unsigned int zone_dma_bits __ro_after_init = 24;
+phys_addr_t zone_dma_limit __ro_after_init = DMA_BIT_MASK(24);
 
 static inline dma_addr_t phys_to_dma_direct(struct device *dev,
 		phys_addr_t phys)
@@ -59,7 +59,7 @@ static gfp_t dma_direct_optimal_gfp_mask(struct device *dev, u64 *phys_limit)
 	 * zones.
 	 */
 	*phys_limit = dma_to_phys(dev, dma_limit);
-	if (*phys_limit <= DMA_BIT_MASK(zone_dma_bits))
+	if (*phys_limit <= zone_dma_limit)
 		return GFP_DMA;
 	if (*phys_limit <= DMA_BIT_MASK(32))
 		return GFP_DMA32;
@@ -583,7 +583,7 @@ int dma_direct_supported(struct device *dev, u64 mask)
 	 * part of the check.
 	 */
 	if (IS_ENABLED(CONFIG_ZONE_DMA))
-		min_mask = min_t(u64, min_mask, DMA_BIT_MASK(zone_dma_bits));
+		min_mask = min_t(u64, min_mask, zone_dma_limit);
 	return mask >= phys_to_dma_unencrypted(dev, min_mask);
 }
 
diff --git a/kernel/dma/pool.c b/kernel/dma/pool.c
index b481c48a31a6..af02948adfff 100644
--- a/kernel/dma/pool.c
+++ b/kernel/dma/pool.c
@@ -70,7 +70,7 @@ static bool cma_in_zone(gfp_t gfp)
 	/* CMA can't cross zone boundaries, see cma_activate_area() */
 	end = cma_get_base(cma) + size - 1;
 	if (IS_ENABLED(CONFIG_ZONE_DMA) && (gfp & GFP_DMA))
-		return end <= DMA_BIT_MASK(zone_dma_bits);
+		return end <= zone_dma_limit;
 	if (IS_ENABLED(CONFIG_ZONE_DMA32) && (gfp & GFP_DMA32))
 		return end <= DMA_BIT_MASK(32);
 	return true;
diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c
index 33d942615be5..be76816b3ff9 100644
--- a/kernel/dma/swiotlb.c
+++ b/kernel/dma/swiotlb.c
@@ -446,7 +446,7 @@ int swiotlb_init_late(size_t size, gfp_t gfp_mask,
 	if (!remap)
 		io_tlb_default_mem.can_grow = true;
 	if (IS_ENABLED(CONFIG_ZONE_DMA) && (gfp_mask & __GFP_DMA))
-		io_tlb_default_mem.phys_limit = DMA_BIT_MASK(zone_dma_bits);
+		io_tlb_default_mem.phys_limit = zone_dma_limit;
 	else if (IS_ENABLED(CONFIG_ZONE_DMA32) && (gfp_mask & __GFP_DMA32))
 		io_tlb_default_mem.phys_limit = DMA_BIT_MASK(32);
 	else
@@ -625,7 +625,7 @@ static struct page *swiotlb_alloc_tlb(struct device *dev, size_t bytes,
 	}
 
 	gfp &= ~GFP_ZONEMASK;
-	if (phys_limit <= DMA_BIT_MASK(zone_dma_bits))
+	if (phys_limit <= zone_dma_limit)
 		gfp |= __GFP_DMA;
 	else if (phys_limit <= DMA_BIT_MASK(32))
 		gfp |= __GFP_DMA32;
  

Patch

diff --git a/include/linux/dma-direct.h b/include/linux/dma-direct.h
index 18aade195884..77c52019c1ff 100644
--- a/include/linux/dma-direct.h
+++ b/include/linux/dma-direct.h
@@ -13,6 +13,7 @@ 
 #include <linux/swiotlb.h>
 
 extern unsigned int zone_dma_bits;
+extern phys_addr_t zone_dma_off;
 
 /*
  * Record the mapping of CPU physical to DMA addresses for a given region.
diff --git a/kernel/dma/direct.c b/kernel/dma/direct.c
index 73c95815789a..7a54fa71a174 100644
--- a/kernel/dma/direct.c
+++ b/kernel/dma/direct.c
@@ -21,6 +21,7 @@ 
  * override the variable below for dma-direct to work properly.
  */
 unsigned int zone_dma_bits __ro_after_init = 24;
+phys_addr_t zone_dma_off __ro_after_init;
 
 static inline dma_addr_t phys_to_dma_direct(struct device *dev,
 		phys_addr_t phys)
@@ -59,7 +60,7 @@  static gfp_t dma_direct_optimal_gfp_mask(struct device *dev, u64 *phys_limit)
 	 * zones.
 	 */
 	*phys_limit = dma_to_phys(dev, dma_limit);
-	if (*phys_limit <= DMA_BIT_MASK(zone_dma_bits))
+	if (*phys_limit <= zone_dma_off + DMA_BIT_MASK(zone_dma_bits))
 		return GFP_DMA;
 	if (*phys_limit <= DMA_BIT_MASK(32))
 		return GFP_DMA32;
@@ -566,7 +567,7 @@  int dma_direct_mmap(struct device *dev, struct vm_area_struct *vma,
 
 int dma_direct_supported(struct device *dev, u64 mask)
 {
-	u64 min_mask = (max_pfn - 1) << PAGE_SHIFT;
+	u64 min_limit = (max_pfn - 1) << PAGE_SHIFT;
 
 	/*
 	 * Because 32-bit DMA masks are so common we expect every architecture
@@ -583,8 +584,9 @@  int dma_direct_supported(struct device *dev, u64 mask)
 	 * part of the check.
 	 */
 	if (IS_ENABLED(CONFIG_ZONE_DMA))
-		min_mask = min_t(u64, min_mask, DMA_BIT_MASK(zone_dma_bits));
-	return mask >= phys_to_dma_unencrypted(dev, min_mask);
+		min_limit = min_t(u64, min_limit,
+				zone_dma_off + DMA_BIT_MASK(zone_dma_bits));
+	return mask >= phys_to_dma_unencrypted(dev, min_limit);
 }
 
 /*
diff --git a/kernel/dma/pool.c b/kernel/dma/pool.c
index b481c48a31a6..0103e932444d 100644
--- a/kernel/dma/pool.c
+++ b/kernel/dma/pool.c
@@ -70,7 +70,7 @@  static bool cma_in_zone(gfp_t gfp)
 	/* CMA can't cross zone boundaries, see cma_activate_area() */
 	end = cma_get_base(cma) + size - 1;
 	if (IS_ENABLED(CONFIG_ZONE_DMA) && (gfp & GFP_DMA))
-		return end <= DMA_BIT_MASK(zone_dma_bits);
+		return end <= zone_dma_off + DMA_BIT_MASK(zone_dma_bits);
 	if (IS_ENABLED(CONFIG_ZONE_DMA32) && (gfp & GFP_DMA32))
 		return end <= DMA_BIT_MASK(32);
 	return true;
diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c
index 33d942615be5..bd3071894d2b 100644
--- a/kernel/dma/swiotlb.c
+++ b/kernel/dma/swiotlb.c
@@ -446,7 +446,8 @@  int swiotlb_init_late(size_t size, gfp_t gfp_mask,
 	if (!remap)
 		io_tlb_default_mem.can_grow = true;
 	if (IS_ENABLED(CONFIG_ZONE_DMA) && (gfp_mask & __GFP_DMA))
-		io_tlb_default_mem.phys_limit = DMA_BIT_MASK(zone_dma_bits);
+		io_tlb_default_mem.phys_limit =
+			zone_dma_off + DMA_BIT_MASK(zone_dma_bits);
 	else if (IS_ENABLED(CONFIG_ZONE_DMA32) && (gfp_mask & __GFP_DMA32))
 		io_tlb_default_mem.phys_limit = DMA_BIT_MASK(32);
 	else
@@ -625,7 +626,7 @@  static struct page *swiotlb_alloc_tlb(struct device *dev, size_t bytes,
 	}
 
 	gfp &= ~GFP_ZONEMASK;
-	if (phys_limit <= DMA_BIT_MASK(zone_dma_bits))
+	if (phys_limit <= zone_dma_off + DMA_BIT_MASK(zone_dma_bits))
 		gfp |= __GFP_DMA;
 	else if (phys_limit <= DMA_BIT_MASK(32))
 		gfp |= __GFP_DMA32;