[v4,3/3] arm64: dts: qcom: ipq9574: add thermal zone nodes
Commit Message
This patch adds thermal zone nodes for the various
sensors present in IPQ9574
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
arch/arm64/boot/dts/qcom/ipq9574.dtsi | 208 ++++++++++++++++++++++++++++++++++
1 file changed, 208 insertions(+)
@@ -969,6 +969,214 @@
};
};
+ thermal-zones {
+ nss-top-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 3>;
+
+ trips {
+ nss-top-critical {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ ubi-0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 4>;
+
+ trips {
+ ubi_0-critical {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ ubi-1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 5>;
+
+ trips {
+ ubi_1-critical {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ ubi-2-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 6>;
+
+ trips {
+ ubi_2-critical {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ ubi-3-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 7>;
+
+ trips {
+ ubi_3-critical {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 8>;
+
+ trips {
+ cpu-critical {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 9>;
+
+ trips {
+ cpu-critical {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 10>;
+
+ trips {
+ cpu-critical {
+ temperature = <120000>;
+ hysteresis = <10000>;
+ type = "critical";
+ };
+
+ cpu-passive {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 11>;
+
+ trips {
+ cpu-critical {
+ temperature = <120000>;
+ hysteresis = <10000>;
+ type = "critical";
+ };
+
+ cpu-passive {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu2-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 12>;
+
+ trips {
+ cpu-critical {
+ temperature = <120000>;
+ hysteresis = <10000>;
+ type = "critical";
+ };
+
+ cpu-passive {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu3-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 13>;
+
+ trips {
+ cpu-critical {
+ temperature = <120000>;
+ hysteresis = <10000>;
+ type = "critical";
+ };
+
+ cpu-passive {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ wcss-phyb-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 14>;
+
+ trips {
+ wcss_phyb-critical {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ top-glue-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 15>;
+
+ trips {
+ top_glue-critical {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,