diff mbox series

[v3,2/9] regmap-irq: Add handle_mask_sync() callback

Message ID e083474b3d467a86e6cb53da8072de4515bd6276.1669100542.git.william.gray@linaro.org
State New
Headers
Series Migrate i8255 GPIO drivers to regmap API |

Commit Message

William Breathitt Gray Nov. 22, 2022, 7:10 a.m. UTC 
  Provide a public callback handle_mask_sync() that drivers can use when
they have more complex IRQ masking logic. The default implementation is
regmap_irq_handle_mask_sync(), used if the chip doesn't provide its own
callback.

Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
---
 drivers/base/regmap/regmap-irq.c | 44 ++++++++++++++++++++++----------
 include/linux/regmap.h           |  5 ++++
 2 files changed, 36 insertions(+), 13 deletions(-)
diff mbox series

Patch

diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c
index 4ef9488d05cd..968681fa8d09 100644
--- a/drivers/base/regmap/regmap-irq.c
+++ b/drivers/base/regmap/regmap-irq.c
@@ -115,12 +115,20 @@  static void regmap_irq_sync_unlock(struct irq_data *data)
 	 */
 	for (i = 0; i < d->chip->num_regs; i++) {
 		if (d->mask_base) {
-			reg = d->get_irq_reg(d, d->mask_base, i);
-			ret = regmap_update_bits(d->map, reg,
-					d->mask_buf_def[i], d->mask_buf[i]);
-			if (ret)
-				dev_err(d->map->dev, "Failed to sync masks in %x\n",
-					reg);
+			if (d->chip->handle_mask_sync)
+				d->chip->handle_mask_sync(d->map, i,
+							  d->mask_buf_def[i],
+							  d->mask_buf[i],
+							  d->chip->irq_drv_data);
+			else {
+				reg = d->get_irq_reg(d, d->mask_base, i);
+				ret = regmap_update_bits(d->map, reg,
+						d->mask_buf_def[i],
+						d->mask_buf[i]);
+				if (ret)
+					dev_err(d->map->dev, "Failed to sync masks in %x\n",
+						reg);
+			}
 		}
 
 		if (d->unmask_base) {
@@ -917,13 +925,23 @@  int regmap_add_irq_chip_fwnode(struct fwnode_handle *fwnode,
 		d->mask_buf[i] = d->mask_buf_def[i];
 
 		if (d->mask_base) {
-			reg = d->get_irq_reg(d, d->mask_base, i);
-			ret = regmap_update_bits(d->map, reg,
-					d->mask_buf_def[i], d->mask_buf[i]);
-			if (ret) {
-				dev_err(map->dev, "Failed to set masks in 0x%x: %d\n",
-					reg, ret);
-				goto err_alloc;
+			if (chip->handle_mask_sync) {
+				ret = chip->handle_mask_sync(d->map, i,
+							     d->mask_buf_def[i],
+							     d->mask_buf[i],
+							     chip->irq_drv_data);
+				if (ret)
+					goto err_alloc;
+			} else {
+				reg = d->get_irq_reg(d, d->mask_base, i);
+				ret = regmap_update_bits(d->map, reg,
+						d->mask_buf_def[i],
+						d->mask_buf[i]);
+				if (ret) {
+					dev_err(map->dev, "Failed to set masks in 0x%x: %d\n",
+						reg, ret);
+					goto err_alloc;
+				}
 			}
 		}
 
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index ca3434dca3a0..cc07645501af 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -1542,6 +1542,8 @@  struct regmap_irq_chip_data;
  *		     before regmap_irq_handler process the interrupts.
  * @handle_post_irq: Driver specific callback to handle interrupt from device
  *		     after handling the interrupts in regmap_irq_handler().
+ * @handle_mask_sync: Callback used to handle IRQ mask syncs. The index will be
+ *		      in the range [0, num_regs)
  * @set_type_virt:   Driver specific callback to extend regmap_irq_set_type()
  *		     and configure virt regs. Deprecated, use @set_type_config
  *		     callback and config registers instead.
@@ -1603,6 +1605,9 @@  struct regmap_irq_chip {
 
 	int (*handle_pre_irq)(void *irq_drv_data);
 	int (*handle_post_irq)(void *irq_drv_data);
+	int (*handle_mask_sync)(struct regmap *map, int index,
+				unsigned int mask_buf_def,
+				unsigned int mask_buf, void *irq_drv_data);
 	int (*set_type_virt)(unsigned int **buf, unsigned int type,
 			     unsigned long hwirq, int reg);
 	int (*set_type_config)(unsigned int **buf, unsigned int type,