[v9,5/5] riscv: dts: add clock generator for Sophgo SG2042 SoC
Commit Message
From: Chen Wang <unicorn_wang@outlook.com>
Add clock generator node to device tree for SG2042, and enable clock for
uart.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
---
.../boot/dts/sophgo/sg2042-milkv-pioneer.dts | 12 ++++++
arch/riscv/boot/dts/sophgo/sg2042.dtsi | 41 +++++++++++++++++++
2 files changed, 53 insertions(+)
@@ -14,6 +14,18 @@ chosen {
};
};
+&cgi_main {
+ clock-frequency = <25000000>;
+};
+
+&cgi_dpll0 {
+ clock-frequency = <25000000>;
+};
+
+&cgi_dpll1 {
+ clock-frequency = <25000000>;
+};
+
&uart0 {
status = "okay";
};
@@ -5,6 +5,7 @@
/dts-v1/;
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/sophgo,sg2042-clkgen.h>
#include "sg2042-cpus.dtsi"
@@ -18,12 +19,49 @@ aliases {
serial0 = &uart0;
};
+ cgi_main: oscillator0 {
+ compatible = "fixed-clock";
+ clock-output-names = "cgi_main";
+ #clock-cells = <0>;
+ };
+
+ cgi_dpll0: oscillator1 {
+ compatible = "fixed-clock";
+ clock-output-names = "cgi_dpll0";
+ #clock-cells = <0>;
+ };
+
+ cgi_dpll1: oscillator2 {
+ compatible = "fixed-clock";
+ clock-output-names = "cgi_dpll1";
+ #clock-cells = <0>;
+ };
+
soc: soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;
+ pllclk: clock-controller@70300100c0 {
+ compatible = "sophgo,sg2042-pll";
+ reg = <0x70 0x300100c0 0x0 0x40>;
+ clocks = <&cgi_main>, <&cgi_dpll0>, <&cgi_dpll1>;
+ #clock-cells = <1>;
+ };
+
+ rpgate: clock-controller@7030010368 {
+ compatible = "sophgo,sg2042-rpgate";
+ reg = <0x70 0x30010368 0x0 0x98>;
+ #clock-cells = <1>;
+ };
+
+ clkgen: clock-controller@7030012000 {
+ compatible = "sophgo,sg2042-clkgen";
+ reg = <0x70 0x30012000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
clint_mswi: interrupt-controller@7094000000 {
compatible = "sophgo,sg2042-aclint-mswi", "thead,c900-aclint-mswi";
reg = <0x00000070 0x94000000 0x00000000 0x00004000>;
@@ -333,6 +371,9 @@ uart0: serial@7040000000 {
interrupt-parent = <&intc>;
interrupts = <112 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <500000000>;
+ clocks = <&clkgen GATE_CLK_UART_500M>,
+ <&clkgen GATE_CLK_APB_UART>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";