diff mbox series

[3/6] ARM: dts: bcm-mobile: move status properties to the end of nodes

Message ID d7060071cb1f4b36b06b6507a09b32c7751ca7f0.1685127525.git.stano.jakubek@gmail.com
State New
Headers
Series ARM: dts: bcm-mobile: DT cleanup |

Commit Message

Stanislav Jakubek May 26, 2023, 7:29 p.m. UTC 
  Move some DT "status" properties so that they're the last specified
property (before sub-nodes).

Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
---
 arch/arm/boot/dts/bcm11351.dtsi   | 8 ++++----
 arch/arm/boot/dts/bcm21664.dtsi   | 6 +++---
 arch/arm/boot/dts/bcm23550.dtsi   | 6 +++---
 arch/arm/boot/dts/bcm28155-ap.dts | 8 ++++----
 4 files changed, 14 insertions(+), 14 deletions(-)

Comments

Florian Fainelli June 8, 2023, 10:09 p.m. UTC | #1 
From: Florian Fainelli <f.fainelli@gmail.com>

On Fri, 26 May 2023 21:29:47 +0200, Stanislav Jakubek <stano.jakubek@gmail.com> wrote:
> Move some DT "status" properties so that they're the last specified
> property (before sub-nodes).
> 
> Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index f395e95e0177..773d717de7f0 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -51,42 +51,42 @@  smc@3404c000 {
 
 	serial@3e000000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e000000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB>;
 		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
 	serial@3e001000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e001000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB2>;
 		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
 	serial@3e002000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e002000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
 	serial@3e003000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e003000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB4>;
 		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
 	L2: l2-cache@3ff20000 {
diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi
index 19ade84e42c1..9e3835a0a7ef 100644
--- a/arch/arm/boot/dts/bcm21664.dtsi
+++ b/arch/arm/boot/dts/bcm21664.dtsi
@@ -51,32 +51,32 @@  smc@3404e000 {
 
 	serial@3e000000 {
 		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e000000 0x118>;
 		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
 		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
 	serial@3e001000 {
 		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e001000 0x118>;
 		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
 		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
 	serial@3e002000 {
 		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e002000 0x118>;
 		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
 	L2: cache-controller@3ff20000 {
diff --git a/arch/arm/boot/dts/bcm23550.dtsi b/arch/arm/boot/dts/bcm23550.dtsi
index ed3ce2fabca6..445eadb8d871 100644
--- a/arch/arm/boot/dts/bcm23550.dtsi
+++ b/arch/arm/boot/dts/bcm23550.dtsi
@@ -129,32 +129,32 @@  slaves@3e000000 {
 
 		uartb: serial@0 {
 			compatible = "snps,dw-apb-uart";
-			status = "disabled";
 			reg = <0x00000000 0x118>;
 			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
 			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			status = "disabled";
 		};
 
 		uartb2: serial@1000 {
 			compatible = "snps,dw-apb-uart";
-			status = "disabled";
 			reg = <0x00001000 0x118>;
 			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
 			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			status = "disabled";
 		};
 
 		uartb3: serial@2000 {
 			compatible = "snps,dw-apb-uart";
-			status = "disabled";
 			reg = <0x00002000 0x118>;
 			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			status = "disabled";
 		};
 
 		bsc1: i2c@16000 {
diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
index c496e33a71a6..0a8ad1d673d8 100644
--- a/arch/arm/boot/dts/bcm28155-ap.dts
+++ b/arch/arm/boot/dts/bcm28155-ap.dts
@@ -21,23 +21,23 @@  serial@3e000000 {
 	};
 
 	i2c@3e016000 {
-		status = "okay";
 		clock-frequency = <400000>;
+		status = "okay";
 	};
 
 	i2c@3e017000 {
-		status = "okay";
 		clock-frequency = <400000>;
+		status = "okay";
 	};
 
 	i2c@3e018000 {
-		status = "okay";
 		clock-frequency = <400000>;
+		status = "okay";
 	};
 
 	i2c@3500d000 {
-		status = "okay";
 		clock-frequency = <100000>;
+		status = "okay";
 
 		pmu: pmu@8 {
 			reg = <0x08>;