From patchwork Fri Aug 4 14:19:35 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Waqar Hameed X-Patchwork-Id: 131200 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a05:612c:44a:b0:3f2:4152:657d with SMTP id ez10csp309159vqb; Fri, 4 Aug 2023 07:41:07 -0700 (PDT) X-Google-Smtp-Source: AGHT+IFmaHm56r/RGDOFcpSbq11UbM94BlXZQlM56pOrViTLJSkVlY2CH6NYXv5sAFf2FBmomLIv X-Received: by 2002:a05:6a20:7f82:b0:12e:98a3:77b7 with SMTP id d2-20020a056a207f8200b0012e98a377b7mr2129552pzj.59.1691160067274; Fri, 04 Aug 2023 07:41:07 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1691160067; cv=none; d=google.com; s=arc-20160816; b=MWF5Z2ilwLZ92JGb5Wauz/RNaKKxhkaVlUX/XNsnxvdEI67ALTzmK9WZqQKA2xEWa8 iEcxpvWbxHwzRa8CX4Ss+FbfLnRRwcomltqSmWebu4F5F3sYeQ5PtuEieoxnZ2hUxUoq zXN9EDzZ2uxA4pVDZmexPWEs/ACluT6V7sNiN4C+EzwMvycI7e+RpxN+Yc0/4llCh3Qu DLe2jxGK8/mA1P8a5Wx9XiCJkE00fi7JpVj6zmyCpXmGvynXgUzI1lhlFkK91cbGiA3M L/dnYi4l0KFD5AQX3dJw0HHH4G3/sTXcDN0XpiMyB0cTWOOUg1e02Am+TFgOe2C+rVvU 3V3A== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:mime-version:message-id:date:in-reply-to:subject :cc:to:from:user-agent:references:dkim-signature; bh=1LxYzvnQgdp/8NVGZTCclgD2/gHsz4wQjRxjW4jWQ34=; fh=9wHMknDb/Ty3dUZp4bz/zhnNR6BJ2ZDSH+VDhkFZ/W0=; b=ETWLtL61ctAG7JMb3STi0VDcVsep0wri6uzq2NZm8rlGi7wcE7MbCKZH/IDp8uoF03 cgTYSVDsVGZHZ2u3B+WSTygu/pL6Y3b53x2W4TjdKqZKZVEnmSMClfnwS761jZfD/Npw iKtO5XohZAfYdS6RF8yo+Mfnmzk+u3syBOUBfqxaJEYjIhg368JvXM4GJ4kl1sAyr3sn gu+T9i6/qaklQ5MV/f5hxZ8II0Lfu9HxKwfCfl+lfkAVJ6NIHVGBaEOkCwUf1yLhWNc7 HH/18T622qDuUM+jFjTXS4vxl4slssvnI5VXzsX82uFL2vOak2rzGIZ3/BOrjYdWRDc0 +cog== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass (test mode) header.i=@axis.com header.s=axis-central1 header.b="A1+s/45U"; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=axis.com Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id bt8-20020a632908000000b005481915c0c7si1796248pgb.32.2023.08.04.07.40.06; Fri, 04 Aug 2023 07:41:07 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass (test mode) header.i=@axis.com header.s=axis-central1 header.b="A1+s/45U"; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=axis.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231712AbjHDOWR (ORCPT + 99 others); Fri, 4 Aug 2023 10:22:17 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49460 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231697AbjHDOWO (ORCPT ); Fri, 4 Aug 2023 10:22:14 -0400 Received: from smtp2.axis.com (smtp2.axis.com [195.60.68.18]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8975E122; Fri, 4 Aug 2023 07:22:12 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=axis.com; q=dns/txt; s=axis-central1; t=1691158934; x=1722694934; h=references:from:to:cc:subject:in-reply-to:date: message-id:mime-version; bh=1LxYzvnQgdp/8NVGZTCclgD2/gHsz4wQjRxjW4jWQ34=; b=A1+s/45UJQoYBUBtWQCAvvosFdV0q1PvN7XQ7dKl6RYY4u8k+ZPtSEK4 FzE0AMD4zShwEFcK5K22TmeRBOkwld6vj75Q0RkdB6eRZu0FDhUknFn7O IaimathV6taf0dPeNFVPWoSDa3zdnddSC7QZZ8jtQc8TeduFolNDqXYFZ nQFnMGN2GM74iliBhpFRrpKGaU3E+kS/QNRR/48kjN3CEeYFCyBCJLLLc afYCGRMsAyMrKgG1PI/atdJqBpctaqMmk+U1PQsV4qZBTGQ4T/VhiTLZ9 KH1905GEUeQeNfSNrFBWy5ccYLyHNBao70erMkfVLwLJ4YPTsC2vZM050 A==; References: User-agent: a.out From: Waqar Hameed To: Alessandro Zummo , Alexandre Belloni CC: , , Subject: [PATCH 2/2] rtc: Add driver for Epson RX8111 In-Reply-To: Date: Fri, 4 Aug 2023 16:19:35 +0200 Message-ID: MIME-Version: 1.0 X-Originating-IP: [10.0.5.60] X-ClientProxiedBy: se-mail01w.axis.com (10.20.40.7) To se-mail01w.axis.com (10.20.40.7) X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED, SPF_HELO_PASS,SPF_PASS,URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-getmail-retrieved-from-mailbox: INBOX X-GMAIL-THRID: 1773309858910170772 X-GMAIL-MSGID: 1773309858910170772 Epson RX8111 is an RTC with alarm, timer and timestamp functionality. Add a basic driver with support for only reading/writing time (for now). Signed-off-by: Waqar Hameed --- drivers/rtc/Kconfig | 10 + drivers/rtc/Makefile | 1 + drivers/rtc/rtc-rx8111.c | 411 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 422 insertions(+) create mode 100644 drivers/rtc/rtc-rx8111.c diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 05f4b2d66290..65e7ea3c2427 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -639,6 +639,16 @@ config RTC_DRV_RX8010 This driver can also be built as a module. If so, the module will be called rtc-rx8010. +config RTC_DRV_RX8111 + tristate "Epson RX8111" + select REGMAP_I2C + depends on I2C + help + If you say yes here you will get support for the Epson RX8111 RTC. + + This driver can also be built as a module. If so, the module will be + called rtc-rx8111. + config RTC_DRV_RX8581 tristate "Epson RX-8571/RX-8581" select REGMAP_I2C diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index fd209883ee2e..c245f39bffc6 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -151,6 +151,7 @@ obj-$(CONFIG_RTC_DRV_RX4581) += rtc-rx4581.o obj-$(CONFIG_RTC_DRV_RX6110) += rtc-rx6110.o obj-$(CONFIG_RTC_DRV_RX8010) += rtc-rx8010.o obj-$(CONFIG_RTC_DRV_RX8025) += rtc-rx8025.o +obj-$(CONFIG_RTC_DRV_RX8111) += rtc-rx8111.o obj-$(CONFIG_RTC_DRV_RX8581) += rtc-rx8581.o obj-$(CONFIG_RTC_DRV_RZN1) += rtc-rzn1.o obj-$(CONFIG_RTC_DRV_S35390A) += rtc-s35390a.o diff --git a/drivers/rtc/rtc-rx8111.c b/drivers/rtc/rtc-rx8111.c new file mode 100644 index 000000000000..15ff776f739e --- /dev/null +++ b/drivers/rtc/rtc-rx8111.c @@ -0,0 +1,411 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Driver for Epson RX8111 RTC. + * + * Copyright (C) 2023 Axis Communications AB + */ + +#include +#include +#include +#include + +#include + +#define RX8111_DRV_NAME "rtc-rx8111" + +#define RX8111_REG_SEC 0x10 /* Second counter. */ +#define RX8111_REG_MIN 0x11 /* Minute counter */ +#define RX8111_REG_HOUR 0x12 /* Hour counter. */ +#define RX8111_REG_WEEK 0x13 /* Week day counter. */ +#define RX8111_REG_DAY 0x14 /* Month day counter. */ +#define RX8111_REG_MONTH 0x15 /* Month counter. */ +#define RX8111_REG_YEAR 0x16 /* Year counter. */ + +#define RX8111_REG_ALARM_MIN 0x17 /* Alarm minute. */ +#define RX8111_REG_ALARM_HOUR 0x18 /* Alarm hour. */ +#define RX8111_REG_ALARM_WEEK_DAY 0x19 /* Alarm week or month day. */ + +#define RX8111_REG_TIMER_COUNTER0 0x1a /* Timer counter LSB. */ +#define RX8111_REG_TIMER_COUNTER1 0x1b /* Timer counter. */ +#define RX8111_REG_TIMER_COUNTER2 0x1c /* Timer counter MSB. */ + +#define RX8111_REG_EXT 0x1d /* Extension register. */ +#define RX8111_REG_FLAG 0x1e /* Flag register. */ +#define RX8111_REG_CTRL 0x1f /* Control register. */ + +#define RX8111_REG_TS_1_1000_SEC 0x20 /* Timestamp 256 or 512 Hz . */ +#define RX8111_REG_TS_1_100_SEC 0x21 /* Timestamp 1 - 128 Hz. */ +#define RX8111_REG_TS_SEC 0x22 /* Timestamp second. */ +#define RX8111_REG_TS_MIN 0x23 /* Timestamp minute. */ +#define RX8111_REG_TS_HOUR 0x24 /* Timestamp hour. */ +#define RX8111_REG_TS_WEEK 0x25 /* Timestamp week day. */ +#define RX8111_REG_TS_DAY 0x26 /* Timestamp month day. */ +#define RX8111_REG_TS_MONTH 0x27 /* Timestamp month. */ +#define RX8111_REG_TS_YEAR 0x28 /* Timestamp year. */ +#define RX8111_REG_TS_STATUS 0x29 /* Timestamp status. */ + +#define RX8111_REG_EVIN_SETTING 0x2b /* Timestamp trigger setting. */ +#define RX8111_REG_ALARM_SEC 0x2c /* Alarm second. */ +#define RX8111_REG_TIMER_CTRL 0x2d /* Timer control. */ +#define RX8111_REG_TS_CTRL0 0x2e /* Timestamp control 0. */ +#define RX8111_REG_CMD_TRIGGER 0x2f /* Timestamp trigger. */ +#define RX8111_REG_PWR_SWITCH_CTRL 0x32 /* Power switch control. */ +#define RX8111_REG_STATUS_MON 0x33 /* Status monitor. */ +#define RX8111_REG_TS_CTRL1 0x34 /* Timestamp control 1. */ +#define RX8111_REG_TS_CTRL2 0x35 /* Timestamp control 2. */ +#define RX8111_REG_TS_CTRL3 0x36 /* Timestamp control 3. */ + +#define RX8111_TIME_BUF_SZ (RX8111_REG_YEAR - RX8111_REG_SEC + 1) +#define RX8111_TIME_BUF_IDX(reg) \ + ({ \ + BUILD_BUG_ON_MSG(reg < RX8111_REG_SEC || reg > RX8111_REG_YEAR,\ + "Invalid reg value"); \ + (reg - RX8111_REG_SEC); \ + }) + +enum rx8111_regfield { + /* RX8111_REG_EXT. */ + RX8111_REGF_TSEL0, + RX8111_REGF_TSEL1, + RX8111_REGF_ETS, + RX8111_REGF_WADA, + RX8111_REGF_TE, + RX8111_REGF_USEL, + RX8111_REGF_FSEL0, + RX8111_REGF_FSEL1, + + /* RX8111_REG_FLAG. */ + RX8111_REGF_XST, + RX8111_REGF_VLF, + RX8111_REGF_EVF, + RX8111_REGF_AF, + RX8111_REGF_TF, + RX8111_REGF_UF, + RX8111_REGF_POR, + + /* RX8111_REG_CTRL. */ + RX8111_REGF_STOP, + RX8111_REGF_EIE, + RX8111_REGF_AIE, + RX8111_REGF_TIE, + RX8111_REGF_UIE, + + /* RX8111_REG_PWR_SWITCH_CTRL. */ + RX8111_REGF_SMPT0, + RX8111_REGF_SMPT1, + RX8111_REGF_SWSEL0, + RX8111_REGF_SWSEL1, + RX8111_REGF_INIEN, + RX8111_REGF_CHGEN, + + /* Sentinel value. */ + RX8111_REGF_MAX +}; + +static const struct reg_field rx8111_regfields[] = { + [RX8111_REGF_TSEL0] = REG_FIELD(RX8111_REG_EXT, 0, 0), + [RX8111_REGF_TSEL1] = REG_FIELD(RX8111_REG_EXT, 1, 1), + [RX8111_REGF_ETS] = REG_FIELD(RX8111_REG_EXT, 2, 2), + [RX8111_REGF_WADA] = REG_FIELD(RX8111_REG_EXT, 3, 3), + [RX8111_REGF_TE] = REG_FIELD(RX8111_REG_EXT, 4, 4), + [RX8111_REGF_USEL] = REG_FIELD(RX8111_REG_EXT, 5, 5), + [RX8111_REGF_FSEL0] = REG_FIELD(RX8111_REG_EXT, 6, 6), + [RX8111_REGF_FSEL1] = REG_FIELD(RX8111_REG_EXT, 7, 7), + + [RX8111_REGF_XST] = REG_FIELD(RX8111_REG_FLAG, 0, 0), + [RX8111_REGF_VLF] = REG_FIELD(RX8111_REG_FLAG, 1, 1), + [RX8111_REGF_EVF] = REG_FIELD(RX8111_REG_FLAG, 2, 2), + [RX8111_REGF_AF] = REG_FIELD(RX8111_REG_FLAG, 3, 3), + [RX8111_REGF_TF] = REG_FIELD(RX8111_REG_FLAG, 4, 4), + [RX8111_REGF_UF] = REG_FIELD(RX8111_REG_FLAG, 5, 5), + [RX8111_REGF_POR] = REG_FIELD(RX8111_REG_FLAG, 7, 7), + + [RX8111_REGF_STOP] = REG_FIELD(RX8111_REG_CTRL, 0, 0), + [RX8111_REGF_EIE] = REG_FIELD(RX8111_REG_CTRL, 2, 2), + [RX8111_REGF_AIE] = REG_FIELD(RX8111_REG_CTRL, 3, 3), + [RX8111_REGF_TIE] = REG_FIELD(RX8111_REG_CTRL, 4, 4), + [RX8111_REGF_UIE] = REG_FIELD(RX8111_REG_CTRL, 5, 5), + + [RX8111_REGF_SMPT0] = REG_FIELD(RX8111_REG_PWR_SWITCH_CTRL, 0, 0), + [RX8111_REGF_SMPT1] = REG_FIELD(RX8111_REG_PWR_SWITCH_CTRL, 1, 1), + [RX8111_REGF_SWSEL0] = REG_FIELD(RX8111_REG_PWR_SWITCH_CTRL, 2, 2), + [RX8111_REGF_SWSEL1] = REG_FIELD(RX8111_REG_PWR_SWITCH_CTRL, 3, 3), + [RX8111_REGF_INIEN] = REG_FIELD(RX8111_REG_PWR_SWITCH_CTRL, 6, 6), + [RX8111_REGF_CHGEN] = REG_FIELD(RX8111_REG_PWR_SWITCH_CTRL, 7, 7), +}; + +static const struct regmap_config rx8111_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = RX8111_REG_TS_CTRL3, +}; + +struct rx8111_data { + struct regmap *regmap; + struct regmap_field *regfields[RX8111_REGF_MAX]; + struct device *dev; + struct rtc_device *rtc; +}; + +static int rx8111_setup(struct rx8111_data *data) +{ + int ret; + + /* Disable extended functionality (timer, events, timestamps etc.). */ + ret = regmap_write(data->regmap, RX8111_REG_EXT, 0); + if (ret) { + dev_err(data->dev, + "Could not disable extended functionality (%d)\n", ret); + return ret; + } + + /* Disable all interrupts. */ + ret = regmap_write(data->regmap, RX8111_REG_CTRL, 0); + if (ret) { + dev_err(data->dev, "Could not disable interrupts (%d)\n", ret); + return ret; + } + + return 0; +} + +static int rx8111_read_vl_flag(struct rx8111_data *data, unsigned int *vlval) +{ + int ret; + + ret = regmap_field_read(data->regfields[RX8111_REGF_VLF], vlval); + if (ret) + dev_err(data->dev, "Could not read VL flag (%d)", ret); + + return ret; +} + +static int rx8111_clear_vl_flag(struct rx8111_data *data) +{ + int ret; + + ret = regmap_field_write(data->regfields[RX8111_REGF_VLF], 0); + if (ret) + dev_err(data->dev, "Could not write VL flag (%d)", ret); + + return ret; +} + +static int rx8111_read_time(struct device *dev, struct rtc_time *tm) +{ + struct rx8111_data *data = dev_get_drvdata(dev); + u8 buf[RX8111_TIME_BUF_SZ]; + unsigned int regval; + int ret; + + /* Check status. */ + ret = rx8111_read_vl_flag(data, ®val); + if (ret) + return ret; + + if (regval) { + dev_warn(data->dev, + "Low voltage detected, time is not reliable\n"); + return -EINVAL; + } + + ret = regmap_field_read(data->regfields[RX8111_REGF_STOP], ®val); + if (ret) { + dev_err(data->dev, "Could not read clock status (%d)\n", ret); + return ret; + } + + if (regval) { + dev_warn(data->dev, "Clock stopped, time is not reliable\n"); + return -EINVAL; + } + + /* Read time. */ + ret = regmap_bulk_read(data->regmap, RX8111_REG_SEC, buf, + ARRAY_SIZE(buf)); + if (ret) { + dev_err(data->dev, "Could not bulk read time (%d)\n", ret); + return ret; + } + + tm->tm_sec = bcd2bin(buf[RX8111_TIME_BUF_IDX(RX8111_REG_SEC)]); + tm->tm_min = bcd2bin(buf[RX8111_TIME_BUF_IDX(RX8111_REG_MIN)]); + tm->tm_hour = bcd2bin(buf[RX8111_TIME_BUF_IDX(RX8111_REG_HOUR)]); + tm->tm_mday = bcd2bin(buf[RX8111_TIME_BUF_IDX(RX8111_REG_DAY)]); + + /* Our month range is [1, 12] and tm_mon has [0, 11]. */ + tm->tm_mon = bcd2bin(buf[RX8111_TIME_BUF_IDX(RX8111_REG_MONTH)]) - 1; + + /* + * We begin at year 2000 (c.f. rtc->range_min) and tm_year starts at + * year 1900. + */ + tm->tm_year = bcd2bin(buf[RX8111_TIME_BUF_IDX(RX8111_REG_YEAR)]) + 100; + + /* A single bit specifies the week day [0, 6]. Note that ffs(1) = 1. */ + tm->tm_wday = ffs(buf[RX8111_TIME_BUF_IDX(RX8111_REG_WEEK)]) - 1; + + return 0; +} + +static int rx8111_set_time(struct device *dev, struct rtc_time *tm) +{ + struct rx8111_data *data = dev_get_drvdata(dev); + u8 buf[RX8111_TIME_BUF_SZ]; + int ret; + + buf[RX8111_TIME_BUF_IDX(RX8111_REG_SEC)] = bin2bcd(tm->tm_sec); + buf[RX8111_TIME_BUF_IDX(RX8111_REG_MIN)] = bin2bcd(tm->tm_min); + buf[RX8111_TIME_BUF_IDX(RX8111_REG_HOUR)] = bin2bcd(tm->tm_hour); + buf[RX8111_TIME_BUF_IDX(RX8111_REG_DAY)] = bin2bcd(tm->tm_mday); + + /* Our month range is [1, 12] and tm_mon has [0, 11]. */ + buf[RX8111_TIME_BUF_IDX(RX8111_REG_MONTH)] = bin2bcd(tm->tm_mon + 1); + + /* + * We begin at year 2000 (c.f. rtc->range_min) and tm_year starts at + * year 1900. + */ + buf[RX8111_TIME_BUF_IDX(RX8111_REG_YEAR)] = bin2bcd(tm->tm_year - 100); + + /* A single bit specifies the week day [0, 6].*/ + buf[RX8111_TIME_BUF_IDX(RX8111_REG_WEEK)] = BIT(tm->tm_wday); + + ret = rx8111_clear_vl_flag(data); + if (ret) + return ret; + + /* Stop the clock. */ + ret = regmap_field_write(data->regfields[RX8111_REGF_STOP], 1); + if (ret) { + dev_err(data->dev, "Could not stop the clock (%d)\n", ret); + return ret; + } + + /* Set the time. */ + ret = regmap_bulk_write(data->regmap, RX8111_REG_SEC, buf, + ARRAY_SIZE(buf)); + if (ret) { + dev_err(data->dev, "Could not bulk write time (%d)\n", ret); + + /* + * We don't bother with trying to start the clock again. We + * check for this in rx8111_read_time() (and thus force user to + * call rx8111_set_time() to try again). + */ + return ret; + } + + /* Start the clock. */ + ret = regmap_field_write(data->regfields[RX8111_REGF_STOP], 0); + if (ret) { + dev_err(data->dev, "Could not start the clock (%d)\n", ret); + return ret; + } + + return 0; +} + +static int rx8111_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) +{ + struct rx8111_data *data = dev_get_drvdata(dev); + unsigned int regval; + unsigned long vlval; + int ret; + + switch (cmd) { + case RTC_VL_READ: + ret = rx8111_read_vl_flag(data, ®val); + if (ret) + return ret; + + vlval = regval ? RTC_VL_DATA_INVALID : 0; + + return put_user(vlval, (unsigned long __user *)arg); + case RTC_VL_CLR: + return rx8111_clear_vl_flag(data); + default: + return -ENOIOCTLCMD; + } +} + +static const struct rtc_class_ops rx8111_rtc_ops = { + .read_time = rx8111_read_time, + .set_time = rx8111_set_time, + .ioctl = rx8111_ioctl, +}; + +static int rx8111_probe(struct i2c_client *client) +{ + struct rx8111_data *data; + struct rtc_device *rtc; + size_t i; + int ret; + + data = devm_kmalloc(&client->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return dev_err_probe(&client->dev, -ENOMEM, + "Could not allocate device data\n"); + + data->dev = &client->dev; + dev_set_drvdata(data->dev, data); + + data->regmap = devm_regmap_init_i2c(client, &rx8111_regmap_config); + if (IS_ERR(data->regmap)) + return dev_err_probe(data->dev, PTR_ERR(data->regmap), + "Could not initialize regmap\n"); + + for (i = 0; i < RX8111_REGF_MAX; ++i) { + data->regfields[i] = devm_regmap_field_alloc( + data->dev, data->regmap, rx8111_regfields[i]); + if (IS_ERR(data->regfields[i])) + return dev_err_probe( + data->dev, PTR_ERR(data->regfields[i]), + "Could not allocate register field %zu\n", i); + } + + ret = rx8111_setup(data); + if (ret) + return ret; + + rtc = devm_rtc_allocate_device(data->dev); + if (IS_ERR(rtc)) + return dev_err_probe(data->dev, PTR_ERR(rtc), + "Could not allocate rtc device\n"); + + rtc->ops = &rx8111_rtc_ops; + rtc->range_min = RTC_TIMESTAMP_BEGIN_2000; + rtc->range_max = RTC_TIMESTAMP_END_2099; + + clear_bit(RTC_FEATURE_ALARM, rtc->features); + + ret = devm_rtc_register_device(rtc); + if (ret) + return dev_err_probe(data->dev, ret, + "Could not register rtc device (%d)\n", + ret); + + return 0; +} + +static const struct of_device_id rx8111_of_match[] = { + { + .compatible = "epson,rx8111", + }, + {} +}; +MODULE_DEVICE_TABLE(of, rx8111_of_match); + +static struct i2c_driver rx8111_driver = { + .driver = { + .name = RX8111_DRV_NAME, + .of_match_table = rx8111_of_match, + }, + .probe = rx8111_probe, +}; +module_i2c_driver(rx8111_driver); + +MODULE_AUTHOR("Waqar Hameed "); +MODULE_DESCRIPTION("Epson RX8111 RTC driver"); +MODULE_LICENSE("GPL");