diff mbox series

[11/23] arm64: zynqmp: Use assigned-clock-rates for setting up SD clock in SOM

Message ID cf5a4e412e1674500a71a0b1eed7fa8393f37ae9.1683034376.git.michal.simek@amd.com
State New
Headers
Series arm64: zynqmp: Misc zynqmp changes |

Commit Message

Michal Simek May 2, 2023, 1:35 p.m. UTC 
  With limited low level configuration done via psu-init only IPs connected
on SOM are initialized and configured. All IPs connected to carrier card
are not initialized. There is a need to do proper reset, pin configuration
and also clock setting.
The patch targets the last part which is setting up proper clock for EMMC
on production SOMs and SD on kv260-revB.

Signed-off-by: Michal Simek <michal.simek@amd.com>
---

 arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi       | 5 ++++-
 arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso | 1 +
 arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso | 1 +
 arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts    | 1 +
 4 files changed, 7 insertions(+), 1 deletion(-)

Comments

Michal Simek May 16, 2023, 11:07 a.m. UTC | #1 
On 5/2/23 15:35, Michal Simek wrote:
> With limited low level configuration done via psu-init only IPs connected
> on SOM are initialized and configured. All IPs connected to carrier card
> are not initialized. There is a need to do proper reset, pin configuration
> and also clock setting.
> The patch targets the last part which is setting up proper clock for EMMC
> on production SOMs and SD on kv260-revB.
> 
> Signed-off-by: Michal Simek <michal.simek@amd.com>
> ---
> 
>   arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi       | 5 ++++-
>   arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso | 1 +
>   arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso | 1 +
>   arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts    | 1 +
>   4 files changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
> index 5e7e1bf5b811..681885c9bcbb 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
> @@ -2,7 +2,8 @@
>   /*
>    * Clock specification for Xilinx ZynqMP
>    *
> - * (C) Copyright 2017 - 2021, Xilinx, Inc.
> + * (C) Copyright 2017 - 2022, Xilinx, Inc.
> + * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
>    *
>    * Michal Simek <michal.simek@xilinx.com>
>    */
> @@ -185,10 +186,12 @@ &sata {
>   
>   &sdhci0 {
>   	clocks = <&zynqmp_clk SDIO0_REF>, <&zynqmp_clk LPD_LSBUS>;
> +	assigned-clocks = <&zynqmp_clk SDIO0_REF>;
>   };
>   
>   &sdhci1 {
>   	clocks = <&zynqmp_clk SDIO1_REF>, <&zynqmp_clk LPD_LSBUS>;
> +	assigned-clocks = <&zynqmp_clk SDIO1_REF>;
>   };
>   
>   &spi0 {
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
> index 2f7a17ec58b4..cb4a5126c4ec 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
> @@ -133,6 +133,7 @@ &sdhci1 { /* on CC with tuned parameters */
>   	no-1-8-v;
>   	disable-wp;
>   	xlnx,mio-bank = <1>;
> +	assigned-clock-rates = <187498123>;
>   };
>   
>   &gem3 { /* required by spec */
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
> index 4695e0e3714f..31bc120dee49 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
> @@ -116,6 +116,7 @@ &sdhci1 { /* on CC with tuned parameters */
>   	clk-phase-sd-hs = <126>, <60>;
>   	clk-phase-uhs-sdr25 = <120>, <60>;
>   	clk-phase-uhs-ddr50 = <126>, <48>;
> +	assigned-clock-rates = <187498123>;
>   };
>   
>   &gem3 { /* required by spec */
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
> index 340a5c43a8b6..d3c6a9feb114 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
> @@ -178,6 +178,7 @@ &sdhci0 { /* MIO13-23 - 16GB emmc MTFC16GAPALBH-IT - U133A */
>   	disable-wp;
>   	bus-width = <8>;
>   	xlnx,mio-bank = <0>;
> +	assigned-clock-rates = <187498123>;
>   };
>   
>   &spi1 { /* MIO6, 9-11 */

Applied.
M
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
index 5e7e1bf5b811..681885c9bcbb 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
@@ -2,7 +2,8 @@ 
 /*
  * Clock specification for Xilinx ZynqMP
  *
- * (C) Copyright 2017 - 2021, Xilinx, Inc.
+ * (C) Copyright 2017 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -185,10 +186,12 @@  &sata {
 
 &sdhci0 {
 	clocks = <&zynqmp_clk SDIO0_REF>, <&zynqmp_clk LPD_LSBUS>;
+	assigned-clocks = <&zynqmp_clk SDIO0_REF>;
 };
 
 &sdhci1 {
 	clocks = <&zynqmp_clk SDIO1_REF>, <&zynqmp_clk LPD_LSBUS>;
+	assigned-clocks = <&zynqmp_clk SDIO1_REF>;
 };
 
 &spi0 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
index 2f7a17ec58b4..cb4a5126c4ec 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
@@ -133,6 +133,7 @@  &sdhci1 { /* on CC with tuned parameters */
 	no-1-8-v;
 	disable-wp;
 	xlnx,mio-bank = <1>;
+	assigned-clock-rates = <187498123>;
 };
 
 &gem3 { /* required by spec */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
index 4695e0e3714f..31bc120dee49 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
@@ -116,6 +116,7 @@  &sdhci1 { /* on CC with tuned parameters */
 	clk-phase-sd-hs = <126>, <60>;
 	clk-phase-uhs-sdr25 = <120>, <60>;
 	clk-phase-uhs-ddr50 = <126>, <48>;
+	assigned-clock-rates = <187498123>;
 };
 
 &gem3 { /* required by spec */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
index 340a5c43a8b6..d3c6a9feb114 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
@@ -178,6 +178,7 @@  &sdhci0 { /* MIO13-23 - 16GB emmc MTFC16GAPALBH-IT - U133A */
 	disable-wp;
 	bus-width = <8>;
 	xlnx,mio-bank = <0>;
+	assigned-clock-rates = <187498123>;
 };
 
 &spi1 { /* MIO6, 9-11 */