[GIT,PULL] SCSI fixes for 6.4-rc6
Commit Message
Four fixes, all in drivers: three fairly obvious small ones and a large
one in aacraid to add block queue completion mapping and fix a CPU
offline hang.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes
The short changelog is:
Bob Pearson (1):
scsi: target: core: Fix error path in target_setup_session()
Justin Tee (1):
scsi: lpfc: Fix incorrect big endian type assignment in bsg loopback path
Michael Kelley (1):
scsi: storvsc: Always set no_report_opcodes
Sagar Biradar (1):
scsi: aacraid: Reply queue mapping to CPUs based on IRQ affinity
And the diffstat:
drivers/scsi/aacraid/aacraid.h | 1 +
drivers/scsi/aacraid/commsup.c | 6 +++++-
drivers/scsi/aacraid/linit.c | 14 ++++++++++++++
drivers/scsi/aacraid/src.c | 25 +++++++++++++++++++++++--
drivers/scsi/lpfc/lpfc_bsg.c | 8 ++++----
drivers/scsi/storvsc_drv.c | 2 ++
drivers/target/target_core_transport.c | 2 ++
7 files changed, 51 insertions(+), 7 deletions(-)
With full diff below.
James
---
Comments
The pull request you sent on Sun, 18 Jun 2023 09:42:40 -0400:
> git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes
has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/8c1f0c38b31025f60437215dd27fffc293565fa4
Thank you!
@@ -1678,6 +1678,7 @@ struct aac_dev
u32 handle_pci_error;
bool init_reset;
u8 soft_reset_support;
+ u8 use_map_queue;
};
#define aac_adapter_interrupt(dev) \
@@ -223,8 +223,12 @@ int aac_fib_setup(struct aac_dev * dev)
struct fib *aac_fib_alloc_tag(struct aac_dev *dev, struct scsi_cmnd *scmd)
{
struct fib *fibptr;
+ u32 blk_tag;
+ int i;
- fibptr = &dev->fibs[scsi_cmd_to_rq(scmd)->tag];
+ blk_tag = blk_mq_unique_tag(scsi_cmd_to_rq(scmd));
+ i = blk_mq_unique_tag_to_tag(blk_tag);
+ fibptr = &dev->fibs[i];
/*
* Null out fields that depend on being zero at the start of
* each I/O
@@ -19,6 +19,7 @@
#include <linux/compat.h>
#include <linux/blkdev.h>
+#include <linux/blk-mq-pci.h>
#include <linux/completion.h>
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -504,6 +505,15 @@ static int aac_slave_configure(struct scsi_device *sdev)
return 0;
}
+static void aac_map_queues(struct Scsi_Host *shost)
+{
+ struct aac_dev *aac = (struct aac_dev *)shost->hostdata;
+
+ blk_mq_pci_map_queues(&shost->tag_set.map[HCTX_TYPE_DEFAULT],
+ aac->pdev, 0);
+ aac->use_map_queue = true;
+}
+
/**
* aac_change_queue_depth - alter queue depths
* @sdev: SCSI device we are considering
@@ -1488,6 +1498,7 @@ static const struct scsi_host_template aac_driver_template = {
.bios_param = aac_biosparm,
.shost_groups = aac_host_groups,
.slave_configure = aac_slave_configure,
+ .map_queues = aac_map_queues,
.change_queue_depth = aac_change_queue_depth,
.sdev_groups = aac_dev_groups,
.eh_abort_handler = aac_eh_abort,
@@ -1775,6 +1786,8 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
shost->max_lun = AAC_MAX_LUN;
pci_set_drvdata(pdev, shost);
+ shost->nr_hw_queues = aac->max_msix;
+ shost->host_tagset = 1;
error = scsi_add_host(shost, &pdev->dev);
if (error)
@@ -1906,6 +1919,7 @@ static void aac_remove_one(struct pci_dev *pdev)
struct aac_dev *aac = (struct aac_dev *)shost->hostdata;
aac_cancel_rescan_worker(aac);
+ aac->use_map_queue = false;
scsi_remove_host(shost);
__aac_shutdown(aac);
@@ -493,6 +493,10 @@ static int aac_src_deliver_message(struct fib *fib)
#endif
u16 vector_no;
+ struct scsi_cmnd *scmd;
+ u32 blk_tag;
+ struct Scsi_Host *shost = dev->scsi_host_ptr;
+ struct blk_mq_queue_map *qmap;
atomic_inc(&q->numpending);
@@ -505,8 +509,25 @@ static int aac_src_deliver_message(struct fib *fib)
if ((dev->comm_interface == AAC_COMM_MESSAGE_TYPE3)
&& dev->sa_firmware)
vector_no = aac_get_vector(dev);
- else
- vector_no = fib->vector_no;
+ else {
+ if (!fib->vector_no || !fib->callback_data) {
+ if (shost && dev->use_map_queue) {
+ qmap = &shost->tag_set.map[HCTX_TYPE_DEFAULT];
+ vector_no = qmap->mq_map[raw_smp_processor_id()];
+ }
+ /*
+ * We hardcode the vector_no for
+ * reserved commands as a valid shost is
+ * absent during the init
+ */
+ else
+ vector_no = 0;
+ } else {
+ scmd = (struct scsi_cmnd *)fib->callback_data;
+ blk_tag = blk_mq_unique_tag(scsi_cmd_to_rq(scmd));
+ vector_no = blk_mq_unique_tag_to_hwq(blk_tag);
+ }
+ }
if (native_hba) {
if (fib->flags & FIB_CONTEXT_FLAG_NATIVE_HBA_TMF) {
@@ -889,7 +889,7 @@ lpfc_bsg_ct_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
struct lpfc_iocbq *piocbq)
{
uint32_t evt_req_id = 0;
- uint32_t cmd;
+ u16 cmd;
struct lpfc_dmabuf *dmabuf = NULL;
struct lpfc_bsg_event *evt;
struct event_data *evt_dat = NULL;
@@ -915,7 +915,7 @@ lpfc_bsg_ct_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
ct_req = (struct lpfc_sli_ct_request *)bdeBuf1->virt;
evt_req_id = ct_req->FsType;
- cmd = ct_req->CommandResponse.bits.CmdRsp;
+ cmd = be16_to_cpu(ct_req->CommandResponse.bits.CmdRsp);
spin_lock_irqsave(&phba->ct_ev_lock, flags);
list_for_each_entry(evt, &phba->ct_ev_waiters, node) {
@@ -3186,8 +3186,8 @@ lpfc_bsg_diag_loopback_run(struct bsg_job *job)
ctreq->RevisionId.bits.InId = 0;
ctreq->FsType = SLI_CT_ELX_LOOPBACK;
ctreq->FsSubType = 0;
- ctreq->CommandResponse.bits.CmdRsp = ELX_LOOPBACK_DATA;
- ctreq->CommandResponse.bits.Size = size;
+ ctreq->CommandResponse.bits.CmdRsp = cpu_to_be16(ELX_LOOPBACK_DATA);
+ ctreq->CommandResponse.bits.Size = cpu_to_be16(size);
segment_offset = ELX_LOOPBACK_HEADER_SZ;
} else
segment_offset = 0;
@@ -1567,6 +1567,8 @@ static int storvsc_device_configure(struct scsi_device *sdevice)
{
blk_queue_rq_timeout(sdevice->request_queue, (storvsc_timeout * HZ));
+ /* storvsc devices don't support MAINTENANCE_IN SCSI cmd */
+ sdevice->no_report_opcodes = 1;
sdevice->no_write_same = 1;
/*
@@ -504,6 +504,8 @@ target_setup_session(struct se_portal_group *tpg,
free_sess:
transport_free_session(sess);
+ return ERR_PTR(rc);
+
free_cnt:
target_free_cmd_counter(cmd_cnt);
return ERR_PTR(rc);