[v4,1/3] dt-bindings: thermal: tsens: Add ipq9574 compatible

Message ID cb26ad4a6550c18b1a70104c6b75c10946766944.1684920389.git.quic_varada@quicinc.com
State New
Headers
Series Enable IPQ9574 TSENS support |

Commit Message

Varadarajan Narayanan May 24, 2023, 9:36 a.m. UTC
  From: Praveenkumar I <quic_ipkumar@quicinc.com>

Qualcomm IPQ9574 has tsens v2.3.1 block, which is similar to IPQ8074 tsens.

Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
[v4]:
	Add description about IPQ9574 and remove unnecessary
	additions to the file
[v3]:
	Fix dt_binding_check & dtbs_check errors (Used
	Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
	as reference/example)

	Drop 'Acked-by: Rob Herring' as suggested in review

[v2]:
	Thanks to Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
	for the tip to make qcom,ipq8074-tsens as fallback.
---
 Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
  

Comments

Conor Dooley May 24, 2023, 7:35 p.m. UTC | #1
On Wed, May 24, 2023 at 03:06:09PM +0530, Varadarajan Narayanan wrote:
> From: Praveenkumar I <quic_ipkumar@quicinc.com>
> 
> Qualcomm IPQ9574 has tsens v2.3.1 block, which is similar to IPQ8074 tsens.
> 
> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> ---
> [v4]:
> 	Add description about IPQ9574 and remove unnecessary
> 	additions to the file
> [v3]:
> 	Fix dt_binding_check & dtbs_check errors (Used
> 	Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
> 	as reference/example)
> 
> 	Drop 'Acked-by: Rob Herring' as suggested in review
> 
> [v2]:
> 	Thanks to Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 	for the tip to make qcom,ipq8074-tsens as fallback.

Thanks for re-sending. I'm going to "ignore" this patch & Krzysztof can
take a look at it next week.

Cheers,
Conor.

> ---
>  Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 11 +++++++++--
>  1 file changed, 9 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> index d1ec963..1a752e0 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> @@ -16,9 +16,14 @@ description: |
>    The IP versions are named v0.1, v1 and v2 in the driver, where v0.1 captures
>    everything before v1 when there was no versioning information.
>  
> +  Since IPQ9574 is similar to IPQ8074, mapping it to IPQ8074 without
> +  introducing a new compatible.
> +
>  properties:
>    compatible:
>      oneOf:
> +      - const: qcom,ipq8074-tsens
> +
>        - description: msm8960 TSENS based
>          items:
>            - enum:
> @@ -64,8 +69,10 @@ properties:
>            - const: qcom,tsens-v2
>  
>        - description: v2 of TSENS with combined interrupt
> -        enum:
> -          - qcom,ipq8074-tsens
> +        items:
> +          - enum:
> +              - qcom,ipq9574-tsens
> +          - const: qcom,ipq8074-tsens
>  
>    reg:
>      items:
> -- 
> 2.7.4
>
  
Krzysztof Kozlowski May 30, 2023, 11:28 a.m. UTC | #2
On 24/05/2023 11:36, Varadarajan Narayanan wrote:
> From: Praveenkumar I <quic_ipkumar@quicinc.com>
> 
> Qualcomm IPQ9574 has tsens v2.3.1 block, which is similar to IPQ8074 tsens.
> 
> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> ---
> [v4]:
> 	Add description about IPQ9574 and remove unnecessary
> 	additions to the file
> [v3]:
> 	Fix dt_binding_check & dtbs_check errors (Used
> 	Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
> 	as reference/example)
> 
> 	Drop 'Acked-by: Rob Herring' as suggested in review
> 
> [v2]:
> 	Thanks to Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 	for the tip to make qcom,ipq8074-tsens as fallback.
> ---
>  Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 11 +++++++++--
>  1 file changed, 9 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> index d1ec963..1a752e0 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> @@ -16,9 +16,14 @@ description: |
>    The IP versions are named v0.1, v1 and v2 in the driver, where v0.1 captures
>    everything before v1 when there was no versioning information.
>  
> +  Since IPQ9574 is similar to IPQ8074, mapping it to IPQ8074 without
> +  introducing a new compatible.
> +
>  properties:
>    compatible:
>      oneOf:
> +      - const: qcom,ipq8074-tsens

No, no need to move it to const. Was correct before.
> +
>        - description: msm8960 TSENS based
>          items:
>            - enum:
> @@ -64,8 +69,10 @@ properties:
>            - const: qcom,tsens-v2
>  
>        - description: v2 of TSENS with combined interrupt
> -        enum:
> -          - qcom,ipq8074-tsens

Again, "-" means you remove a diff hunk. `man diff` and `man patch` (or
Wikipedia, dunno).

> +        items:
> +          - enum:
> +              - qcom,ipq9574-tsens
> +          - const: qcom,ipq8074-tsens

No, do not touch existing entry.

You need new item on entire list with two compatibles:

+        items:
+          - enum:
+              - qcom,ipq9574-tsens
+          - const: qcom,ipq8074-tsens

That's it. There should be no removal hunks in your diff (so one with "-").

Best regards,
Krzysztof
  

Patch

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index d1ec963..1a752e0 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -16,9 +16,14 @@  description: |
   The IP versions are named v0.1, v1 and v2 in the driver, where v0.1 captures
   everything before v1 when there was no versioning information.
 
+  Since IPQ9574 is similar to IPQ8074, mapping it to IPQ8074 without
+  introducing a new compatible.
+
 properties:
   compatible:
     oneOf:
+      - const: qcom,ipq8074-tsens
+
       - description: msm8960 TSENS based
         items:
           - enum:
@@ -64,8 +69,10 @@  properties:
           - const: qcom,tsens-v2
 
       - description: v2 of TSENS with combined interrupt
-        enum:
-          - qcom,ipq8074-tsens
+        items:
+          - enum:
+              - qcom,ipq9574-tsens
+          - const: qcom,ipq8074-tsens
 
   reg:
     items: