From patchwork Mon Aug 14 08:06:02 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Varadarajan Narayanan X-Patchwork-Id: 135216 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a59:b824:0:b0:3f2:4152:657d with SMTP id z4csp2599449vqi; Mon, 14 Aug 2023 01:28:31 -0700 (PDT) X-Google-Smtp-Source: AGHT+IHXWrDUOvpO37paYhah3/WF+McXiHLJLTdN3lTAwNKFjI2xRaQnc60Z/0BFWfmmrDNZAD0Y X-Received: by 2002:a05:6402:184c:b0:51e:362d:b172 with SMTP id v12-20020a056402184c00b0051e362db172mr6540906edy.32.1692001710982; Mon, 14 Aug 2023 01:28:30 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1692001710; cv=none; d=google.com; s=arc-20160816; b=M3oWRwXvQ4HgLBV/4dFTelsi2X0aY2yGup00pWifb5gG5yqRcaM5xRdd0z5yzrU18C tS4PxAglunbDkJjuXjVNlB5zo7T8CcPzUHLZ3YtwnjgryL0ZtV9HPQMWI0sNQ9LGv173 TFP4rJE68X4FuFwtLgcF2YXxCf8u4KqRBlQe56B4mykZwpXMAi7YxWAhJ8YSwAaLqUXz 8gSIFClZ20Yzn18/4qTOHPwlhurW2U5FX+xrsqFg3ml0HDdfa8J/daEtPnhD4px1PcTj OE+dArxF1D59nQXrekJQ4X50elAxFFman4RXc2Z9hNEWR6m8PUS6NuCga6PKxjEk1V4a 9oNg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:mime-version:references:in-reply-to:message-id :date:subject:to:from:dkim-signature; bh=c1XxotIfgEZhTv+JF9U5BxxuXAXFBJ/jxr22/bY6Pgo=; fh=0k2HJcQX94dKFWJ5tuN/W9uwe9Rj3tjxabABZ2i+WP0=; b=Vc39HXU690poaArb/RSnwqitVl/zko6ZzsqF8w3V4HN3GIKDfOGC+H3L1G09xbYguB UOMBUbdRJ8iUMZV7QzM8BAOYFFG7OzLTKi+cVjm/N83ouHJ7AYGlNAAEdL4sDJe1fxhV w0m+hY8TLeUzpRV+Gth0fl/XYi4/LcaOQ0n5uaz0fV9o0g/x1qdVVDKrwAgpwZFlx1TM dDQKMWm/BP4Bcg/0OlQpooGa2aSelsE7yXgviTit4O3OdddCiBVTH1eThze6TO1jAT5N fCpjjz1I7j4miSfMZwceHPkV3m6K/JkUjXhC1PDg3D/ScVipVjHTD+ErbpCrbk2DdBSU F7JA== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@quicinc.com header.s=qcppdkim1 header.b="g9oO5cv/"; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=quicinc.com Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id s22-20020a056402165600b005254e01293csi2852734edx.626.2023.08.14.01.28.06; Mon, 14 Aug 2023 01:28:30 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass header.i=@quicinc.com header.s=qcppdkim1 header.b="g9oO5cv/"; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=quicinc.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234549AbjHNIK2 (ORCPT + 99 others); Mon, 14 Aug 2023 04:10:28 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:60870 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234107AbjHNIJx (ORCPT ); Mon, 14 Aug 2023 04:09:53 -0400 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 6304410FA; Mon, 14 Aug 2023 01:09:28 -0700 (PDT) Received: from pps.filterd (m0279863.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 37E7VhSc013972; Mon, 14 Aug 2023 08:08:26 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : subject : date : message-id : in-reply-to : references : mime-version : content-type; s=qcppdkim1; bh=c1XxotIfgEZhTv+JF9U5BxxuXAXFBJ/jxr22/bY6Pgo=; b=g9oO5cv/Y0hs5HgRR28FRoLkdS/RZoqSlf0elt+GOuIODAnQE+xiaDpReGXCzmrb8Pb+ OBfvEBqkIRaCAvtyYAjydub9bIY5b8s1ymZ07NJUyMM5HFhTQDzDBIjZmOtElExP9zW9 IG0f95xBBzN3ECcSxtDIXW/p6gBxaiCcRSydLedj+uKXjZdIJgUwrjus3ZTjEvDiPMMh X8f7TLKTS/R+5TiZEpBraOln07W/dC4H2fyVIWqn3Dlm1t1WjLfB+r79Guc3TAUxWg+k t8uaq9byUSBVF5Vxpqf14zXhmCEiWvzyWEHum40RFFJ4nq2Uy2/988EVZjLaiy6tbLYx OA== Received: from nasanppmta02.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3sffxt821w-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 14 Aug 2023 08:08:26 +0000 Received: from nasanex01a.na.qualcomm.com (nasanex01a.na.qualcomm.com [10.52.223.231]) by NASANPPMTA02.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 37E88Ob0025676 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 14 Aug 2023 08:08:24 GMT Received: from varda-linux.qualcomm.com (10.80.80.8) by nasanex01a.na.qualcomm.com (10.52.223.231) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1118.30; Mon, 14 Aug 2023 01:08:18 -0700 From: Varadarajan Narayanan To: , , , , , , , , , , , , , , , , , , , , , , Subject: [PATCH v8 2/5] phy: qcom: Introduce M31 USB PHY driver Date: Mon, 14 Aug 2023 13:36:02 +0530 Message-ID: X-Mailer: git-send-email 2.7.4 In-Reply-To: References: MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nasanex01a.na.qualcomm.com (10.52.223.231) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-ORIG-GUID: WFxMvk-7LZw5P_z8rBrXjypIWJcHZwPI X-Proofpoint-GUID: WFxMvk-7LZw5P_z8rBrXjypIWJcHZwPI X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.267,Aquarius:18.0.957,Hydra:6.0.591,FMLib:17.11.176.26 definitions=2023-08-14_03,2023-08-10_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 mlxlogscore=999 spamscore=0 malwarescore=0 clxscore=1015 suspectscore=0 adultscore=0 bulkscore=0 mlxscore=0 priorityscore=1501 impostorscore=0 lowpriorityscore=0 phishscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2306200000 definitions=main-2308140074 X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED, SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-getmail-retrieved-from-mailbox: INBOX X-GMAIL-THRID: 1774192385761054795 X-GMAIL-MSGID: 1774192385761054795 Add the M31 USB2 phy driver for the USB M31 PHY (https://www.m31tech.com) found in Qualcomm IPQ5018, IPQ5332 SoCs. Signed-off-by: Varadarajan Narayanan Reviewed-by: Bjorn Andersson --- v8: Change commit subject and message per review comments Don't include of_platform.h Change struct init coding style GENMASK -> BIT for one define v6: Kconfig:Add COMPILE_TEST and remove USB_GADGET from 'depends' Change 'selects' USB_PHY -> GENERIC_PHY Driver: Use correct headers const int -> unsigned int for 'nregs' in private data Use generic names for clk, phy in m31 phy structure Init register details directly instead of using macro Use dev_err_probe in the error paths of driver probe v5: Kconfig and Makefile:- place snippet according to sorted order Use generic phy instead of usb-phy Use ARRAY_SIZE for reg init instead of blank last entry Fix copyright year v4: Remove unused enum Error handling for devm_clk_get v1: Combine driver, makefile and kconfig into 1 patch Remove 'qscratch' region and its usage. The controller driver takes care of those settings Use compatible/data to handle ipq5332 init Drop the default case Get resources by index instead of name as there is only one resource Add clock Fix review comments in the driver --- drivers/phy/qualcomm/Kconfig | 11 ++ drivers/phy/qualcomm/Makefile | 1 + drivers/phy/qualcomm/phy-qcom-m31.c | 294 ++++++++++++++++++++++++++++++++++++ 3 files changed, 306 insertions(+) create mode 100644 drivers/phy/qualcomm/phy-qcom-m31.c diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig index ced6038..d891058 100644 --- a/drivers/phy/qualcomm/Kconfig +++ b/drivers/phy/qualcomm/Kconfig @@ -143,6 +143,17 @@ config PHY_QCOM_EUSB2_REPEATER PMICs. The repeater is paired with a Synopsys eUSB2 Phy on Qualcomm SOCs. +config PHY_QCOM_M31_USB + tristate "Qualcomm M31 HS PHY driver support" + depends on USB && (ARCH_QCOM || COMPILE_TEST) + select GENERIC_PHY + help + Enable this to support M31 HS PHY transceivers on Qualcomm chips + with DWC3 USB core. It handles PHY initialization, clock + management required after resetting the hardware and power + management. This driver is required even for peripheral only or + host only mode configurations. + config PHY_QCOM_USB_HS tristate "Qualcomm USB HS PHY module" depends on USB_ULPI_BUS diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile index df94581..ffd609a 100644 --- a/drivers/phy/qualcomm/Makefile +++ b/drivers/phy/qualcomm/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o obj-$(CONFIG_PHY_QCOM_EDP) += phy-qcom-edp.o obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o +obj-$(CONFIG_PHY_QCOM_M31_USB) += phy-qcom-m31.o obj-$(CONFIG_PHY_QCOM_PCIE2) += phy-qcom-pcie2.o obj-$(CONFIG_PHY_QCOM_QMP_COMBO) += phy-qcom-qmp-combo.o diff --git a/drivers/phy/qualcomm/phy-qcom-m31.c b/drivers/phy/qualcomm/phy-qcom-m31.c new file mode 100644 index 0000000..ed08072 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-m31.c @@ -0,0 +1,294 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2014-2023, The Linux Foundation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define USB2PHY_PORT_UTMI_CTRL1 0x40 + +#define USB2PHY_PORT_UTMI_CTRL2 0x44 + #define UTMI_ULPI_SEL BIT(7) + #define UTMI_TEST_MUX_SEL BIT(6) + +#define HS_PHY_CTRL_REG 0x10 + #define UTMI_OTG_VBUS_VALID BIT(20) + #define SW_SESSVLD_SEL BIT(28) + +#define USB_PHY_UTMI_CTRL0 0x3c + +#define USB_PHY_UTMI_CTRL5 0x50 + #define POR_EN BIT(1) + +#define USB_PHY_HS_PHY_CTRL_COMMON0 0x54 + #define COMMONONN BIT(7) + #define FSEL BIT(4) + #define RETENABLEN BIT(3) + #define FREQ_24MHZ (BIT(6) | BIT(4)) + +#define USB_PHY_HS_PHY_CTRL2 0x64 + #define USB2_SUSPEND_N_SEL BIT(3) + #define USB2_SUSPEND_N BIT(2) + #define USB2_UTMI_CLK_EN BIT(1) + +#define USB_PHY_CFG0 0x94 + #define UTMI_PHY_OVERRIDE_EN BIT(1) + +#define USB_PHY_REFCLK_CTRL 0xa0 + #define CLKCORE BIT(1) + +#define USB2PHY_PORT_POWERDOWN 0xa4 + #define POWER_UP BIT(0) + #define POWER_DOWN 0 + +#define USB_PHY_FSEL_SEL 0xb8 + #define FREQ_SEL BIT(0) + +#define USB2PHY_USB_PHY_M31_XCFGI_1 0xbc + #define USB2_0_TX_ENABLE BIT(2) + +#define USB2PHY_USB_PHY_M31_XCFGI_4 0xc8 + #define HSTX_SLEW_RATE_565PS GENMASK(1, 0) + #define PLL_CHARGING_PUMP_CURRENT_35UA GENMASK(4, 3) + #define ODT_VALUE_38_02_OHM GENMASK(7, 6) + +#define USB2PHY_USB_PHY_M31_XCFGI_5 0xcc + #define ODT_VALUE_45_02_OHM BIT(2) + #define HSTX_PRE_EMPHASIS_LEVEL_0_55MA BIT(0) + +#define USB2PHY_USB_PHY_M31_XCFGI_11 0xe4 + #define XCFG_COARSE_TUNE_NUM BIT(1) + #define XCFG_FINE_TUNE_NUM BIT(3) + +struct m31_phy_regs { + u32 off; + u32 val; + u32 delay; +}; + +struct m31_priv_data { + bool ulpi_mode; + const struct m31_phy_regs *regs; + unsigned int nregs; +}; + +struct m31_phy_regs m31_ipq5332_regs[] = { + { + USB_PHY_CFG0, + UTMI_PHY_OVERRIDE_EN, + 0 + }, + { + USB_PHY_UTMI_CTRL5, + POR_EN, + 15 + }, + { + USB_PHY_FSEL_SEL, + FREQ_SEL, + 0 + }, + { + USB_PHY_HS_PHY_CTRL_COMMON0, + COMMONONN | FREQ_24MHZ | RETENABLEN, + 0 + }, + { + USB_PHY_UTMI_CTRL5, + POR_EN, + 0 + }, + { + USB_PHY_HS_PHY_CTRL2, + USB2_SUSPEND_N_SEL | USB2_SUSPEND_N | USB2_UTMI_CLK_EN, + 0 + }, + { + USB2PHY_USB_PHY_M31_XCFGI_11, + XCFG_COARSE_TUNE_NUM | XCFG_FINE_TUNE_NUM, + 0 + }, + { + USB2PHY_USB_PHY_M31_XCFGI_4, + HSTX_SLEW_RATE_565PS | PLL_CHARGING_PUMP_CURRENT_35UA | ODT_VALUE_38_02_OHM, + 0 + }, + { + USB2PHY_USB_PHY_M31_XCFGI_1, + USB2_0_TX_ENABLE, + 0 + }, + { + USB2PHY_USB_PHY_M31_XCFGI_5, + ODT_VALUE_45_02_OHM | HSTX_PRE_EMPHASIS_LEVEL_0_55MA, + 4 + }, + { + USB_PHY_UTMI_CTRL5, + 0x0, + 0 + }, + { + USB_PHY_HS_PHY_CTRL2, + USB2_SUSPEND_N | USB2_UTMI_CLK_EN, + 0 + }, +}; + +struct m31usb_phy { + struct phy *phy; + void __iomem *base; + const struct m31_phy_regs *regs; + int nregs; + + struct regulator *vreg; + struct clk *clk; + struct reset_control *reset; + + bool ulpi_mode; +}; + +static int m31usb_phy_init(struct phy *phy) +{ + struct m31usb_phy *qphy = phy_get_drvdata(phy); + const struct m31_phy_regs *regs = qphy->regs; + int i, ret; + + ret = regulator_enable(qphy->vreg); + if (ret) { + dev_err(&phy->dev, "failed to enable regulator, %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(qphy->clk); + if (ret) { + if (qphy->vreg) + regulator_disable(qphy->vreg); + dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret); + return ret; + } + + /* Perform phy reset */ + reset_control_assert(qphy->reset); + udelay(5); + reset_control_deassert(qphy->reset); + + /* configure for ULPI mode if requested */ + if (qphy->ulpi_mode) + writel(0x0, qphy->base + USB2PHY_PORT_UTMI_CTRL2); + + /* Enable the PHY */ + writel(POWER_UP, qphy->base + USB2PHY_PORT_POWERDOWN); + + /* Turn on phy ref clock */ + for (i = 0; i < qphy->nregs; i++) { + writel(regs[i].val, qphy->base + regs[i].off); + if (regs[i].delay) + udelay(regs[i].delay); + } + + return 0; +} + +static int m31usb_phy_shutdown(struct phy *phy) +{ + struct m31usb_phy *qphy = phy_get_drvdata(phy); + + /* Disable the PHY */ + writel_relaxed(POWER_DOWN, qphy->base + USB2PHY_PORT_POWERDOWN); + + clk_disable_unprepare(qphy->clk); + + regulator_disable(qphy->vreg); + + return 0; +} + +static const struct phy_ops m31usb_phy_gen_ops = { + .power_on = m31usb_phy_init, + .power_off = m31usb_phy_shutdown, + .owner = THIS_MODULE, +}; + +static int m31usb_phy_probe(struct platform_device *pdev) +{ + struct phy_provider *phy_provider; + const struct m31_priv_data *data; + struct device *dev = &pdev->dev; + struct m31usb_phy *qphy; + + qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL); + if (!qphy) + return -ENOMEM; + + qphy->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(qphy->base)) + return PTR_ERR(qphy->base); + + qphy->reset = devm_reset_control_get_exclusive_by_index(dev, 0); + if (IS_ERR(qphy->reset)) + return PTR_ERR(qphy->reset); + + qphy->clk = devm_clk_get(dev, NULL); + if (IS_ERR(qphy->clk)) + return dev_err_probe(dev, PTR_ERR(qphy->clk), + "failed to get clk\n"); + + data = of_device_get_match_data(dev); + qphy->regs = data->regs; + qphy->nregs = data->nregs; + qphy->ulpi_mode = data->ulpi_mode; + + qphy->phy = devm_phy_create(dev, NULL, &m31usb_phy_gen_ops); + if (IS_ERR(qphy->phy)) + return dev_err_probe(dev, PTR_ERR(qphy->phy), + "failed to create phy\n"); + + qphy->vreg = devm_regulator_get(dev, "vdda-phy"); + if (IS_ERR(qphy->vreg)) + return dev_err_probe(dev, PTR_ERR(qphy->phy), + "failed to get vreg\n"); + + phy_set_drvdata(qphy->phy, qphy); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (!IS_ERR(phy_provider)) + dev_info(dev, "Registered M31 USB phy\n"); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct m31_priv_data m31_ipq5332_data = { + .ulpi_mode = false, + .regs = m31_ipq5332_regs, + .nregs = ARRAY_SIZE(m31_ipq5332_regs), +}; + +static const struct of_device_id m31usb_phy_id_table[] = { + { .compatible = "qcom,ipq5332-usb-hsphy", .data = &m31_ipq5332_data }, + { }, +}; +MODULE_DEVICE_TABLE(of, m31usb_phy_id_table); + +static struct platform_driver m31usb_phy_driver = { + .probe = m31usb_phy_probe, + .driver = { + .name = "qcom-m31usb-phy", + .of_match_table = m31usb_phy_id_table, + }, +}; + +module_platform_driver(m31usb_phy_driver); + +MODULE_DESCRIPTION("USB2 Qualcomm M31 HSPHY driver"); +MODULE_LICENSE("GPL");