[2/2] staging: rtl8192e: Remove function rtl92e_is_legal_rf_path
Commit Message
Remove function rtl92e_is_legal_rf_path that will always return 1. Reason
is that the eRFPath is always 0 for RF90_PATH_A or 1 for RF90_PATH_B but
never 2 or 3. In most usage cases this is easy to see but for the
following functions that use rtl92e_is_legal_rf_path it is more
difficult:
rtl92e_set_rf_reg and rtl92e_get_rf_reg are used in:
rtl92e_set_bandwidth (eRFPath only for 0 and 1)
rtl92e_config_rf (eRFPath only for 0 and 1)
_rtl92e_phy_switch_channel_step (eRFPath only for 0 and 1)
_rtl92e_dm_check_tx_power_tracking_thermal (eRFPath only for 0)
rtl92e_check_bb_and_rf is used in:
rtl92e_config_rf (eRFPath only for 0 and 1)
_rtl92e_bb_config_para_file (eRFPath only for 0)
rtl92e_config_rf_path is used in:
rtl92e_config_rf (eRFPath only for 0 and 1)
Remove dead code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
---
.../staging/rtl8192e/rtl8192e/r8190P_rtl8256.c | 6 ------
drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c | 2 --
drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c | 18 ------------------
drivers/staging/rtl8192e/rtl8192e/r8192E_phy.h | 1 -
4 files changed, 27 deletions(-)
@@ -22,9 +22,6 @@ void rtl92e_set_bandwidth(struct net_device *dev,
}
for (eRFPath = 0; eRFPath < priv->num_total_rf_path; eRFPath++) {
- if (!rtl92e_is_legal_rf_path(dev, eRFPath))
- continue;
-
switch (bandwidth) {
case HT_CHANNEL_WIDTH_20:
rtl92e_set_rf_reg(dev, (enum rf90_radio_path)eRFPath,
@@ -67,9 +64,6 @@ bool rtl92e_config_rf(struct net_device *dev)
for (eRFPath = (enum rf90_radio_path)RF90_PATH_A;
eRFPath < priv->num_total_rf_path; eRFPath++) {
- if (!rtl92e_is_legal_rf_path(dev, eRFPath))
- continue;
-
pPhyReg = &priv->phy_reg_def[eRFPath];
switch (eRFPath) {
@@ -1515,8 +1515,6 @@ static void _rtl92e_process_phyinfo(struct r8192_priv *priv, u8 *buffer,
if (!prev_st->bIsCCK && prev_st->bPacketToSelf) {
for (rfpath = RF90_PATH_A; rfpath < priv->num_total_rf_path; rfpath++) {
- if (!rtl92e_is_legal_rf_path(priv->rtllib->dev, rfpath))
- continue;
if (priv->stats.rx_rssi_percentage[rfpath] == 0) {
priv->stats.rx_rssi_percentage[rfpath] =
prev_st->RxMIMOSignalStrength[rfpath];
@@ -47,20 +47,6 @@ static u32 _rtl92e_calculate_bit_shift(u32 dwBitMask)
return ffs(dwBitMask) - 1;
}
-u8 rtl92e_is_legal_rf_path(struct net_device *dev, u32 eRFPath)
-{
- u8 ret = 1;
- struct r8192_priv *priv = rtllib_priv(dev);
-
- if (priv->rf_type == RF_1T2R) {
- if (eRFPath == RF90_PATH_A || eRFPath == RF90_PATH_B)
- ret = 1;
- else if (eRFPath == RF90_PATH_C || eRFPath == RF90_PATH_D)
- ret = 0;
- }
- return ret;
-}
-
void rtl92e_set_bb_reg(struct net_device *dev, u32 dwRegAddr, u32 dwBitMask,
u32 dwData)
{
@@ -196,8 +182,6 @@ void rtl92e_set_rf_reg(struct net_device *dev, enum rf90_radio_path eRFPath,
struct r8192_priv *priv = rtllib_priv(dev);
u32 Original_Value, BitShift, New_Value;
- if (!rtl92e_is_legal_rf_path(dev, eRFPath))
- return;
if (priv->rtllib->rf_power_state != rf_on && !priv->being_init_adapter)
return;
@@ -233,8 +217,6 @@ u32 rtl92e_get_rf_reg(struct net_device *dev, enum rf90_radio_path eRFPath,
u32 Original_Value, Readback_Value, BitShift;
struct r8192_priv *priv = rtllib_priv(dev);
- if (!rtl92e_is_legal_rf_path(dev, eRFPath))
- return 0;
if (priv->rtllib->rf_power_state != rf_on && !priv->being_init_adapter)
return 0;
mutex_lock(&priv->rf_mutex);
@@ -49,7 +49,6 @@ enum rf90_radio_path {
#define bMaskLWord 0x0000ffff
#define bMaskDWord 0xffffffff
-u8 rtl92e_is_legal_rf_path(struct net_device *dev, u32 eRFPath);
void rtl92e_set_bb_reg(struct net_device *dev, u32 dwRegAddr,
u32 dwBitMask, u32 dwData);
u32 rtl92e_get_bb_reg(struct net_device *dev, u32 dwRegAddr, u32 dwBitMask);