[v3,1/2] dt-bindings: hwmon: (lm75) Add AMS AS6200 temperature sensor
Commit Message
as6200 is a temperature sensor with a range between -40°C to
125°C degrees and an accuracy of ±0.4°C degree between 0
and 65°C and ±1°C for the other ranges.
Signed-off-by: Abdel Alkuor <alkuor@gmail.com>
---
Changes in v3:
- Enable interrupt property conditionally based on the chips that
support it.
- Fix alignment for the added example
Changes in v2:
- Incorporate as6200 into lm75 bindings
.../devicetree/bindings/hwmon/lm75.yaml | 29 +++++++++++++++++++
1 file changed, 29 insertions(+)
Comments
On 20/12/2023 01:17, Abdel Alkuor wrote:
> as6200 is a temperature sensor with a range between -40°C to
> 125°C degrees and an accuracy of ±0.4°C degree between 0
> and 65°C and ±1°C for the other ranges.
>
> Signed-off-by: Abdel Alkuor <alkuor@gmail.com>
> ---
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
@@ -14,6 +14,7 @@ properties:
compatible:
enum:
- adi,adt75
+ - ams,as6200
- atmel,at30ts74
- dallas,ds1775
- dallas,ds75
@@ -48,10 +49,24 @@ properties:
vs-supply:
description: phandle to the regulator that provides the +VS supply
+ interrupts:
+ maxItems: 1
+
required:
- compatible
- reg
+allOf:
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ const: ams,as6200
+ then:
+ properties:
+ interrupts: false
+
additionalProperties: false
examples:
@@ -66,3 +81,17 @@ examples:
vs-supply = <&vs>;
};
};
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ temperature-sensor@48 {
+ compatible = "ams,as6200";
+ reg = <0x48>;
+ vs-supply = <&vs>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <17 IRQ_TYPE_EDGE_BOTH>;
+ };
+ };