[v4,10/10] selftests/nolibc: add mmap and munmap test cases

Message ID 9c46f648cd8c784405afed565bed120f0a2f239e.1687187451.git.falcon@tinylab.org
State New
Headers
Series tools/nolibc: add a new syscall helper |

Commit Message

Zhangjin Wu June 19, 2023, 3:55 p.m. UTC
  Three mmap/munmap related test cases are added:

- mmap(NULL, 0, PROT_READ, MAP_PRIVATE, 0, 0), MAP_FAILED, EINVAL)

  The length argument must be greater than 0, otherwise, fail with -EINVAL.

- munmap((void *)-1, 4*1024), -1, EINVAL)

  Invalid (void *)-1 address fail with -EINVAL.

- test_mmap_munmap(4*1024)

  It finds a init file, mmap() it and then munmap().

Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
---
 tools/testing/selftests/nolibc/nolibc-test.c | 31 ++++++++++++++++++++
 1 file changed, 31 insertions(+)
  

Comments

Zhangjin Wu June 19, 2023, 4:14 p.m. UTC | #1
Hi,

> Three mmap/munmap related test cases are added:
> 
> - mmap(NULL, 0, PROT_READ, MAP_PRIVATE, 0, 0), MAP_FAILED, EINVAL)
> 
>   The length argument must be greater than 0, otherwise, fail with -EINVAL.
> 
> - munmap((void *)-1, 4*1024), -1, EINVAL)
>

Sorry, this message doesn't match the code, will change it in new revison.

>   Invalid (void *)-1 address fail with -EINVAL.
> 
> - test_mmap_munmap(4*1024)
> 
>   It finds a init file, mmap() it and then munmap().
> 
> Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
> ---
>  tools/testing/selftests/nolibc/nolibc-test.c | 31 ++++++++++++++++++++
>  1 file changed, 31 insertions(+)
> 
> diff --git a/tools/testing/selftests/nolibc/nolibc-test.c b/tools/testing/selftests/nolibc/nolibc-test.c
> index 80ab29e2887c..f7c0ca72cb28 100644
> --- a/tools/testing/selftests/nolibc/nolibc-test.c
> +++ b/tools/testing/selftests/nolibc/nolibc-test.c
> @@ -592,6 +592,34 @@ static int test_stat_timestamps(void)
>  	return 0;
>  }
>  
> +int test_mmap_munmap(int size)
> +{
> +	char init_files[5][20] = {"/init", "/sbin/init", "/etc/init", "/bin/init", "/bin/sh"};
> +	int ret, fd, i;
> +	void *mem;
> +
> +	for (i = 0; i < 5; i++) {
> +		ret = fd = open(init_files[i], O_RDONLY);
> +		if (ret < 0)
> +			continue;
> +		else
> +			break;
> +	}
> +	if (ret < 0)
> +		return ret;
> +
> +	mem = mmap(NULL, size, PROT_READ, MAP_SHARED, fd, 0);
> +	if (mem == MAP_FAILED)
> +		return -1;
> +

And here need a close(fd):

	if (mem == MAP_FAILED) {
		close(fd);
		return -1;
	}

> +	ret = munmap(mem, size);
> +	if (ret < 0)
> +		return ret;
> +

And here too:

	if (ret < 0) {
		close(fd);
		return ret;
	}


> +	return close(fd);

	close(fd);
	return 0;

Thanks,
Zhangjin

> +}
> +
> +
>  /* Run syscall tests between IDs <min> and <max>.
>   * Return 0 on success, non-zero on failure.
>   */
> @@ -666,6 +694,9 @@ int run_syscall(int min, int max)
>  		CASE_TEST(lseek_m1);          EXPECT_SYSER(1, lseek(-1, 0, SEEK_SET), -1, EBADF); break;
>  		CASE_TEST(lseek_0);           EXPECT_SYSER(1, lseek(0, 0, SEEK_SET), -1, ESPIPE); break;
>  		CASE_TEST(mkdir_root);        EXPECT_SYSER(1, mkdir("/", 0755), -1, EEXIST); break;
> +		CASE_TEST(mmap_bad);          EXPECT_PTRER(1, mmap(NULL, 0, PROT_READ, MAP_PRIVATE, 0, 0), MAP_FAILED, EINVAL); break;
> +		CASE_TEST(munmap_bad);        EXPECT_SYSER(1, munmap((void *)-1, 0), -1, EINVAL); break;
> +		CASE_TEST(mmap_good);         EXPECT_SYSZR(1, test_mmap_munmap(4*1024)); break;
>  		CASE_TEST(open_tty);          EXPECT_SYSNE(1, tmp = open("/dev/null", 0), -1); if (tmp != -1) close(tmp); break;
>  		CASE_TEST(open_blah);         EXPECT_SYSER(1, tmp = open("/proc/self/blah", 0), -1, ENOENT); if (tmp != -1) close(tmp); break;
>  		CASE_TEST(poll_null);         EXPECT_SYSZR(1, poll(NULL, 0, 0)); break;
> -- 
> 2.25.1
  
Thomas Weißschuh June 21, 2023, 6:58 p.m. UTC | #2
On 2023-06-19 23:55:41+0800, Zhangjin Wu wrote:
> Three mmap/munmap related test cases are added:
> 
> - mmap(NULL, 0, PROT_READ, MAP_PRIVATE, 0, 0), MAP_FAILED, EINVAL)
> 
>   The length argument must be greater than 0, otherwise, fail with -EINVAL.
> 
> - munmap((void *)-1, 4*1024), -1, EINVAL)
> 
>   Invalid (void *)-1 address fail with -EINVAL.
> 
> - test_mmap_munmap(4*1024)
> 
>   It finds a init file, mmap() it and then munmap().
> 
> Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
> ---
>  tools/testing/selftests/nolibc/nolibc-test.c | 31 ++++++++++++++++++++
>  1 file changed, 31 insertions(+)
> 
> diff --git a/tools/testing/selftests/nolibc/nolibc-test.c b/tools/testing/selftests/nolibc/nolibc-test.c
> index 80ab29e2887c..f7c0ca72cb28 100644
> --- a/tools/testing/selftests/nolibc/nolibc-test.c
> +++ b/tools/testing/selftests/nolibc/nolibc-test.c
> @@ -592,6 +592,34 @@ static int test_stat_timestamps(void)
>  	return 0;
>  }
>  
> +int test_mmap_munmap(int size)
> +{
> +	char init_files[5][20] = {"/init", "/sbin/init", "/etc/init", "/bin/init", "/bin/sh"};

Why not /proc/1/exe or even /proc/self/exe?

I know your other series tries to remove the procfs dependency, but
we're not there yet :-).

Also does it make sense to pass a size parameter?
Why not use either PAGE_SIZE or the real size of the binary from
fstat().

> +	int ret, fd, i;
> +	void *mem;
> +
> +	for (i = 0; i < 5; i++) {
> +		ret = fd = open(init_files[i], O_RDONLY);
> +		if (ret < 0)
> +			continue;
> +		else
> +			break;
> +	}
> +	if (ret < 0)
> +		return ret;
> +
> +	mem = mmap(NULL, size, PROT_READ, MAP_SHARED, fd, 0);
> +	if (mem == MAP_FAILED)
> +		return -1;
> +
> +	ret = munmap(mem, size);
> +	if (ret < 0)
> +		return ret;
> +
> +	return close(fd);
> +}
> +
> +
>  /* Run syscall tests between IDs <min> and <max>.
>   * Return 0 on success, non-zero on failure.
>   */
> @@ -666,6 +694,9 @@ int run_syscall(int min, int max)
>  		CASE_TEST(lseek_m1);          EXPECT_SYSER(1, lseek(-1, 0, SEEK_SET), -1, EBADF); break;
>  		CASE_TEST(lseek_0);           EXPECT_SYSER(1, lseek(0, 0, SEEK_SET), -1, ESPIPE); break;
>  		CASE_TEST(mkdir_root);        EXPECT_SYSER(1, mkdir("/", 0755), -1, EEXIST); break;
> +		CASE_TEST(mmap_bad);          EXPECT_PTRER(1, mmap(NULL, 0, PROT_READ, MAP_PRIVATE, 0, 0), MAP_FAILED, EINVAL); break;
> +		CASE_TEST(munmap_bad);        EXPECT_SYSER(1, munmap((void *)-1, 0), -1, EINVAL); break;
> +		CASE_TEST(mmap_good);         EXPECT_SYSZR(1, test_mmap_munmap(4*1024)); break;
>  		CASE_TEST(open_tty);          EXPECT_SYSNE(1, tmp = open("/dev/null", 0), -1); if (tmp != -1) close(tmp); break;
>  		CASE_TEST(open_blah);         EXPECT_SYSER(1, tmp = open("/proc/self/blah", 0), -1, ENOENT); if (tmp != -1) close(tmp); break;
>  		CASE_TEST(poll_null);         EXPECT_SYSZR(1, poll(NULL, 0, 0)); break;
> -- 
> 2.25.1
>
  
Zhangjin Wu June 22, 2023, 7:32 p.m. UTC | #3
Hi, Thomas

> On 2023-06-19 23:55:41+0800, Zhangjin Wu wrote:
> > Three mmap/munmap related test cases are added:
> > 
> > - mmap(NULL, 0, PROT_READ, MAP_PRIVATE, 0, 0), MAP_FAILED, EINVAL)
> > 
> >   The length argument must be greater than 0, otherwise, fail with -EINVAL.
> > 
> > - munmap((void *)-1, 4*1024), -1, EINVAL)
> > 
> >   Invalid (void *)-1 address fail with -EINVAL.
> > 
> > - test_mmap_munmap(4*1024)
> > 
> >   It finds a init file, mmap() it and then munmap().
> > 
> > Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
> > ---
> >  tools/testing/selftests/nolibc/nolibc-test.c | 31 ++++++++++++++++++++
> >  1 file changed, 31 insertions(+)
> > 
> > diff --git a/tools/testing/selftests/nolibc/nolibc-test.c b/tools/testing/selftests/nolibc/nolibc-test.c
> > index 80ab29e2887c..f7c0ca72cb28 100644
> > --- a/tools/testing/selftests/nolibc/nolibc-test.c
> > +++ b/tools/testing/selftests/nolibc/nolibc-test.c
> > @@ -592,6 +592,34 @@ static int test_stat_timestamps(void)
> >  	return 0;
> >  }
> >  
> > +int test_mmap_munmap(int size)
> > +{
> > +	char init_files[5][20] = {"/init", "/sbin/init", "/etc/init", "/bin/init", "/bin/sh"};
> 
> Why not /proc/1/exe or even /proc/self/exe?
> 
> I know your other series tries to remove the procfs dependency, but
> we're not there yet :-).
> 

Yeah, '/proc/self/exe' is a choice, if so, the 'has_proc' should be added ;-)

> Also does it make sense to pass a size parameter?
> Why not use either PAGE_SIZE or the real size of the binary from
> fstat().
> 

Ok, as the manpage of mmap shows:

       For mmap(), offset must be a multiple of the underlying huge page
       size.  The system automatically aligns length to be a multiple of
       the underlying huge page size.

       For munmap(), addr, and length must both be a multiple of the
       underlying huge page size.

perhaps we should do further tests:

* the real size/length
* even > the real size
* the PAGE_SIZE
* not aligned with PAGE_SIZE

If such tests are required, the 'size' and even 'offset' arguments could be
provided to cover different combination or we do such tests internally, then,
the arguments are not required.

Thanks,
Zhangjin

> > +	int ret, fd, i;
> > +	void *mem;
> > +
> > +	for (i = 0; i < 5; i++) {
> > +		ret = fd = open(init_files[i], O_RDONLY);
> > +		if (ret < 0)
> > +			continue;
> > +		else
> > +			break;
> > +	}
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	mem = mmap(NULL, size, PROT_READ, MAP_SHARED, fd, 0);
> > +	if (mem == MAP_FAILED)
> > +		return -1;
> > +
> > +	ret = munmap(mem, size);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	return close(fd);
> > +}
> > +
> > +
> >  /* Run syscall tests between IDs <min> and <max>.
> >   * Return 0 on success, non-zero on failure.
> >   */
> > @@ -666,6 +694,9 @@ int run_syscall(int min, int max)
> >  		CASE_TEST(lseek_m1);          EXPECT_SYSER(1, lseek(-1, 0, SEEK_SET), -1, EBADF); break;
> >  		CASE_TEST(lseek_0);           EXPECT_SYSER(1, lseek(0, 0, SEEK_SET), -1, ESPIPE); break;
> >  		CASE_TEST(mkdir_root);        EXPECT_SYSER(1, mkdir("/", 0755), -1, EEXIST); break;
> > +		CASE_TEST(mmap_bad);          EXPECT_PTRER(1, mmap(NULL, 0, PROT_READ, MAP_PRIVATE, 0, 0), MAP_FAILED, EINVAL); break;
> > +		CASE_TEST(munmap_bad);        EXPECT_SYSER(1, munmap((void *)-1, 0), -1, EINVAL); break;
> > +		CASE_TEST(mmap_good);         EXPECT_SYSZR(1, test_mmap_munmap(4*1024)); break;
> >  		CASE_TEST(open_tty);          EXPECT_SYSNE(1, tmp = open("/dev/null", 0), -1); if (tmp != -1) close(tmp); break;
> >  		CASE_TEST(open_blah);         EXPECT_SYSER(1, tmp = open("/proc/self/blah", 0), -1, ENOENT); if (tmp != -1) close(tmp); break;
> >  		CASE_TEST(poll_null);         EXPECT_SYSZR(1, poll(NULL, 0, 0)); break;
> > -- 
> > 2.25.1
> >
  
Thomas Weißschuh June 22, 2023, 7:56 p.m. UTC | #4
Hi Zhangjin,

On 2023-06-23 03:32:49+0800, Zhangjin Wu wrote:
> > On 2023-06-19 23:55:41+0800, Zhangjin Wu wrote:
> > > Three mmap/munmap related test cases are added:
> > > 
> > > - mmap(NULL, 0, PROT_READ, MAP_PRIVATE, 0, 0), MAP_FAILED, EINVAL)
> > > 
> > >   The length argument must be greater than 0, otherwise, fail with -EINVAL.
> > > 
> > > - munmap((void *)-1, 4*1024), -1, EINVAL)
> > > 
> > >   Invalid (void *)-1 address fail with -EINVAL.
> > > 
> > > - test_mmap_munmap(4*1024)
> > > 
> > >   It finds a init file, mmap() it and then munmap().
> > > 
> > > Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
> > > ---
> > >  tools/testing/selftests/nolibc/nolibc-test.c | 31 ++++++++++++++++++++
> > >  1 file changed, 31 insertions(+)
> > > 
> > > diff --git a/tools/testing/selftests/nolibc/nolibc-test.c b/tools/testing/selftests/nolibc/nolibc-test.c
> > > index 80ab29e2887c..f7c0ca72cb28 100644
> > > --- a/tools/testing/selftests/nolibc/nolibc-test.c
> > > +++ b/tools/testing/selftests/nolibc/nolibc-test.c
> > > @@ -592,6 +592,34 @@ static int test_stat_timestamps(void)
> > >  	return 0;
> > >  }
> > >  
> > > +int test_mmap_munmap(int size)
> > > +{
> > > +	char init_files[5][20] = {"/init", "/sbin/init", "/etc/init", "/bin/init", "/bin/sh"};
> > 
> > Why not /proc/1/exe or even /proc/self/exe?
> > 
> > I know your other series tries to remove the procfs dependency, but
> > we're not there yet :-).
> > 
> 
> Yeah, '/proc/self/exe' is a choice, if so, the 'has_proc' should be added ;-)

Currently procfs is a hard requirement. So I would leave 'has_proc' to
the other series that may change this.

> > Also does it make sense to pass a size parameter?
> > Why not use either PAGE_SIZE or the real size of the binary from
> > fstat().
> > 
> 
> Ok, as the manpage of mmap shows:
> 
>        For mmap(), offset must be a multiple of the underlying huge page
>        size.  The system automatically aligns length to be a multiple of
>        the underlying huge page size.
> 
>        For munmap(), addr, and length must both be a multiple of the
>        underlying huge page size.
> 
> perhaps we should do further tests:
> 
> * the real size/length
> * even > the real size
> * the PAGE_SIZE
> * not aligned with PAGE_SIZE
> 
> If such tests are required, the 'size' and even 'offset' arguments could be
> provided to cover different combination or we do such tests internally, then,
> the arguments are not required.

I think task of nolibc-test is to test the code in nolibc itself.
The custom mmap implementation is trivial and directly calls the
syscall. These additionally proposed tests would effectively test the
core kernels implementation of mmap() and not the code of nolibc.

Therefore I don't think they are necessary in nolibc-test and the
functionality is hopefully already be tested in another testsuite.


Note:

Testing mmap is indeed useful to test the implementation of
my_syscall6() by providing a bogus value in the 'offset' parameter.
I think we do have such a testcase.

<snip>

Thomas
  
Zhangjin Wu June 24, 2023, 7:47 a.m. UTC | #5
Hi, Thomas

> Hi Zhangjin,
> 
> On 2023-06-23 03:32:49+0800, Zhangjin Wu wrote:
> > > On 2023-06-19 23:55:41+0800, Zhangjin Wu wrote:
> > > > Three mmap/munmap related test cases are added:
> > > > 
(snipped)
> > > >  
> > > > +int test_mmap_munmap(int size)
> > > > +{
> > > > +	char init_files[5][20] = {"/init", "/sbin/init", "/etc/init", "/bin/init", "/bin/sh"};
> > > 
> > > Why not /proc/1/exe or even /proc/self/exe?
> > > 
> > > I know your other series tries to remove the procfs dependency, but
> > > we're not there yet :-).
> > > 
> > 
> > Yeah, '/proc/self/exe' is a choice, if so, the 'has_proc' should be added ;-)
> 
> Currently procfs is a hard requirement. So I would leave 'has_proc' to
> the other series that may change this.
>

Yeah, but to be consistent with the already existing 'proc' condition
check, 'proc' will be used at first ;-)

    $ grep '(proc,' -ur tools/testing/selftests/nolibc/nolibc-test.c 
		CASE_TEST(chmod_net);         EXPECT_SYSZR(proc, chmod("/proc/self/net", 0555)); break;
		CASE_TEST(chmod_self);        EXPECT_SYSER(proc, chmod("/proc/self", 0555), -1, EPERM); break;
		CASE_TEST(chown_self);        EXPECT_SYSER(proc, chown("/proc/self", 0, 0), -1, EPERM); break;
		CASE_TEST(chroot_exe);        EXPECT_SYSER(proc, chroot("/proc/self/exe"), -1, ENOTDIR); break;
		CASE_TEST(link_cross);        EXPECT_SYSER(proc, link("/proc/self/net", "/blah"), -1, EXDEV); break;

Btw, for the /proc/self used in test_stat_timestamps, in the revision of the
'minimal' config support series, instead of using '/', a 'proc' should be added
like above test cases.

> > > Also does it make sense to pass a size parameter?
> > > Why not use either PAGE_SIZE or the real size of the binary from
> > > fstat().
> > > 
> > 
> > Ok, as the manpage of mmap shows:
> > 
> >        For mmap(), offset must be a multiple of the underlying huge page
> >        size.  The system automatically aligns length to be a multiple of
> >        the underlying huge page size.
> > 
> >        For munmap(), addr, and length must both be a multiple of the
> >        underlying huge page size.
> > 
> > perhaps we should do further tests:
> > 
> > * the real size/length
> > * even > the real size
> > * the PAGE_SIZE
> > * not aligned with PAGE_SIZE
> > 
> > If such tests are required, the 'size' and even 'offset' arguments could be
> > provided to cover different combination or we do such tests internally, then,
> > the arguments are not required.
> 
> I think task of nolibc-test is to test the code in nolibc itself.
> The custom mmap implementation is trivial and directly calls the
> syscall. These additionally proposed tests would effectively test the
> core kernels implementation of mmap() and not the code of nolibc.
> 
> Therefore I don't think they are necessary in nolibc-test and the
> functionality is hopefully already be tested in another testsuite.
>

Ok, it is reasonable.
 
> 
> Note:
> 
> Testing mmap is indeed useful to test the implementation of
> my_syscall6() by providing a bogus value in the 'offset' parameter.
> I think we do have such a testcase.
>

Ok, we can pass a valid offset (n*PAGE_SIZE) to mmap() in test_mmap_munmap() or
add a whole new mmap_offset test case with a PAGE_SIZE not aligned offset (such
as 1).

Thanks,
Zhangjin

> <snip>
> 
> Thomas
  

Patch

diff --git a/tools/testing/selftests/nolibc/nolibc-test.c b/tools/testing/selftests/nolibc/nolibc-test.c
index 80ab29e2887c..f7c0ca72cb28 100644
--- a/tools/testing/selftests/nolibc/nolibc-test.c
+++ b/tools/testing/selftests/nolibc/nolibc-test.c
@@ -592,6 +592,34 @@  static int test_stat_timestamps(void)
 	return 0;
 }
 
+int test_mmap_munmap(int size)
+{
+	char init_files[5][20] = {"/init", "/sbin/init", "/etc/init", "/bin/init", "/bin/sh"};
+	int ret, fd, i;
+	void *mem;
+
+	for (i = 0; i < 5; i++) {
+		ret = fd = open(init_files[i], O_RDONLY);
+		if (ret < 0)
+			continue;
+		else
+			break;
+	}
+	if (ret < 0)
+		return ret;
+
+	mem = mmap(NULL, size, PROT_READ, MAP_SHARED, fd, 0);
+	if (mem == MAP_FAILED)
+		return -1;
+
+	ret = munmap(mem, size);
+	if (ret < 0)
+		return ret;
+
+	return close(fd);
+}
+
+
 /* Run syscall tests between IDs <min> and <max>.
  * Return 0 on success, non-zero on failure.
  */
@@ -666,6 +694,9 @@  int run_syscall(int min, int max)
 		CASE_TEST(lseek_m1);          EXPECT_SYSER(1, lseek(-1, 0, SEEK_SET), -1, EBADF); break;
 		CASE_TEST(lseek_0);           EXPECT_SYSER(1, lseek(0, 0, SEEK_SET), -1, ESPIPE); break;
 		CASE_TEST(mkdir_root);        EXPECT_SYSER(1, mkdir("/", 0755), -1, EEXIST); break;
+		CASE_TEST(mmap_bad);          EXPECT_PTRER(1, mmap(NULL, 0, PROT_READ, MAP_PRIVATE, 0, 0), MAP_FAILED, EINVAL); break;
+		CASE_TEST(munmap_bad);        EXPECT_SYSER(1, munmap((void *)-1, 0), -1, EINVAL); break;
+		CASE_TEST(mmap_good);         EXPECT_SYSZR(1, test_mmap_munmap(4*1024)); break;
 		CASE_TEST(open_tty);          EXPECT_SYSNE(1, tmp = open("/dev/null", 0), -1); if (tmp != -1) close(tmp); break;
 		CASE_TEST(open_blah);         EXPECT_SYSER(1, tmp = open("/proc/self/blah", 0), -1, ENOENT); if (tmp != -1) close(tmp); break;
 		CASE_TEST(poll_null);         EXPECT_SYSZR(1, poll(NULL, 0, 0)); break;