[v4,06/12] net: ethernet: mtk_eth_soc: reset PCS state
Commit Message
Reset PCS state when changing interface mode.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 4 ++++
drivers/net/ethernet/mediatek/mtk_sgmii.c | 4 ++++
2 files changed, 8 insertions(+)
@@ -548,6 +548,10 @@
#define SGMII_SEND_AN_ERROR_EN BIT(11)
#define SGMII_IF_MODE_MASK GENMASK(5, 1)
+/* Register to reset SGMII design */
+#define SGMII_RESERVED_0 0x34
+#define SGMII_SW_RESET BIT(0)
+
/* Register to set SGMII speed, ANA RG_ Control Signals III*/
#define SGMSYS_ANA_RG_CS3 0x2028
#define RG_PHY_SPEED_MASK (BIT(2) | BIT(3))
@@ -88,6 +88,10 @@ static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
SGMII_PHYA_PWD, SGMII_PHYA_PWD);
+ /* Reset SGMII PCS state */
+ regmap_update_bits(mpcs->regmap, SGMII_RESERVED_0,
+ SGMII_SW_RESET, SGMII_SW_RESET);
+
if (mpcs->flags & MTK_SGMII_FLAG_PN_SWAP)
regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_WRAP_CTRL,
SGMII_PN_SWAP_MASK,