TDX introduces a new CPU mode: Secure Arbitration Mode (SEAM). This
mode runs only the TDX module itself or other code to load the TDX
module.
The host kernel communicates with SEAM software via a new SEAMCALL
instruction. This is conceptually similar to a guest->host hypercall,
except it is made from the host to SEAM software instead.
The TDX module defines a set of SEAMCALL leaf functions to allow the
host to initialize it, and to create and run protected VMs. SEAMCALL
leaf functions use an ABI different from the x86-64 system-v ABI.
Instead, they share the same ABI with the TDCALL leaf functions.
Implement a function __seamcall() to allow the host to make SEAMCALL
to SEAM software using the TDX_MODULE_CALL macro which is the common
assembly for both SEAMCALL and TDCALL.
SEAMCALL instruction causes #GP when SEAMRR isn't enabled, and #UD when
CPU is not in VMX operation. The current TDX_MODULE_CALL macro doesn't
handle any of them. There's no way to check whether the CPU is in VMX
operation or not.
Initializing the TDX module is done at runtime on demand, and it depends
on the caller to ensure CPU is in VMX operation before making SEAMCALL.
To avoid getting Oops when the caller mistakenly tries to initialize the
TDX module when CPU is not in VMX operation, extend the TDX_MODULE_CALL
macro to handle #UD (and also #GP, which can theoretically still happen
when TDX isn't actually enabled by the BIOS, i.e. due to BIOS bug).
Introduce two new TDX error codes for #UD and #GP respectively so the
caller can distinguish. Also, Opportunistically put the new TDX error
codes and the existing TDX_SEAMCALL_VMFAILINVALID into INTEL_TDX_HOST
Kconfig option as they are only used when it is on.
As __seamcall() can potentially return multiple error codes, besides the
actual SEAMCALL leaf function return code, also introduce a wrapper
function seamcall() to convert the __seamcall() error code to the kernel
error code, so the caller doesn't need to duplicate the code to check
return value of __seamcall() and return kernel error code accordingly.
Signed-off-by: Kai Huang <kai.huang@intel.com>
---
v5 -> v6:
- Added code to handle #UD and #GP (Dave).
- Moved the seamcall() wrapper function to this patch, and used a
temporary __always_unused to avoid compile warning (Dave).
- v3 -> v5 (no feedback on v4):
- Explicitly tell TDX_SEAMCALL_VMFAILINVALID is returned if the
SEAMCALL itself fails.
- Improve the changelog.
---
arch/x86/include/asm/tdx.h | 9 ++++++
arch/x86/virt/vmx/tdx/Makefile | 2 +-
arch/x86/virt/vmx/tdx/seamcall.S | 52 ++++++++++++++++++++++++++++++++
arch/x86/virt/vmx/tdx/tdx.c | 42 ++++++++++++++++++++++++++
arch/x86/virt/vmx/tdx/tdx.h | 8 +++++
arch/x86/virt/vmx/tdx/tdxcall.S | 19 ++++++++++--
6 files changed, 129 insertions(+), 3 deletions(-)
create mode 100644 arch/x86/virt/vmx/tdx/seamcall.S
@@ -8,6 +8,10 @@
#include <asm/ptrace.h>
#include <asm/shared/tdx.h>
+#ifdef CONFIG_INTEL_TDX_HOST
+
+#include <asm/trapnr.h>
+
/*
* SW-defined error codes.
*
@@ -18,6 +22,11 @@
#define TDX_SW_ERROR (TDX_ERROR | GENMASK_ULL(47, 40))
#define TDX_SEAMCALL_VMFAILINVALID (TDX_SW_ERROR | _UL(0xFFFF0000))
+#define TDX_SEAMCALL_GP (TDX_SW_ERROR | X86_TRAP_GP)
+#define TDX_SEAMCALL_UD (TDX_SW_ERROR | X86_TRAP_UD)
+
+#endif
+
#ifndef __ASSEMBLY__
#include <asm/pgtable_types.h>
@@ -1,2 +1,2 @@
# SPDX-License-Identifier: GPL-2.0-only
-obj-y += tdx.o
+obj-y += tdx.o seamcall.o
new file mode 100644
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/linkage.h>
+#include <asm/frame.h>
+
+#include "tdxcall.S"
+
+/*
+ * __seamcall() - Host-side interface functions to SEAM software module
+ * (the P-SEAMLDR or the TDX module).
+ *
+ * Transform function call register arguments into the SEAMCALL register
+ * ABI. Return TDX_SEAMCALL_VMFAILINVALID if the SEAMCALL itself fails,
+ * or the completion status of the SEAMCALL leaf function. Additional
+ * output operands are saved in @out (if it is provided by the caller).
+ *
+ *-------------------------------------------------------------------------
+ * SEAMCALL ABI:
+ *-------------------------------------------------------------------------
+ * Input Registers:
+ *
+ * RAX - SEAMCALL Leaf number.
+ * RCX,RDX,R8-R9 - SEAMCALL Leaf specific input registers.
+ *
+ * Output Registers:
+ *
+ * RAX - SEAMCALL completion status code.
+ * RCX,RDX,R8-R11 - SEAMCALL Leaf specific output registers.
+ *
+ *-------------------------------------------------------------------------
+ *
+ * __seamcall() function ABI:
+ *
+ * @fn (RDI) - SEAMCALL Leaf number, moved to RAX
+ * @rcx (RSI) - Input parameter 1, moved to RCX
+ * @rdx (RDX) - Input parameter 2, moved to RDX
+ * @r8 (RCX) - Input parameter 3, moved to R8
+ * @r9 (R8) - Input parameter 4, moved to R9
+ *
+ * @out (R9) - struct tdx_module_output pointer
+ * stored temporarily in R12 (not
+ * used by the P-SEAMLDR or the TDX
+ * module). It can be NULL.
+ *
+ * Return (via RAX) the completion status of the SEAMCALL, or
+ * TDX_SEAMCALL_VMFAILINVALID.
+ */
+SYM_FUNC_START(__seamcall)
+ FRAME_BEGIN
+ TDX_MODULE_CALL host=1
+ FRAME_END
+ RET
+SYM_FUNC_END(__seamcall)
@@ -267,6 +267,48 @@ bool platform_tdx_enabled(void)
return !!tdx_keyid_num;
}
+/*
+ * Wrapper of __seamcall() to convert SEAMCALL leaf function error code
+ * to kernel error code. @seamcall_ret and @out contain the SEAMCALL
+ * leaf function return code and the additional output respectively if
+ * not NULL.
+ */
+static int __always_unused seamcall(u64 fn, u64 rcx, u64 rdx, u64 r8, u64 r9,
+ u64 *seamcall_ret,
+ struct tdx_module_output *out)
+{
+ u64 sret;
+
+ sret = __seamcall(fn, rcx, rdx, r8, r9, out);
+
+ /* Save SEAMCALL return code if caller wants it */
+ if (seamcall_ret)
+ *seamcall_ret = sret;
+
+ /* SEAMCALL was successful */
+ if (!sret)
+ return 0;
+
+ switch (sret) {
+ case TDX_SEAMCALL_GP:
+ /*
+ * platform_tdx_enabled() is checked to be true
+ * before making any SEAMCALL.
+ */
+ WARN_ON_ONCE(1);
+ fallthrough;
+ case TDX_SEAMCALL_VMFAILINVALID:
+ /* Return -ENODEV if the TDX module is not loaded. */
+ return -ENODEV;
+ case TDX_SEAMCALL_UD:
+ /* Return -EINVAL if CPU isn't in VMX operation. */
+ return -EINVAL;
+ default:
+ /* Return -EIO if the actual SEAMCALL leaf failed. */
+ return -EIO;
+ }
+}
+
/*
* Detect and initialize the TDX module.
*
@@ -12,4 +12,12 @@
/* MSR to report KeyID partitioning between MKTME and TDX */
#define MSR_IA32_MKTME_KEYID_PARTITIONING 0x00000087
+/*
+ * Do not put any hardware-defined TDX structure representations below
+ * this comment!
+ */
+
+struct tdx_module_output;
+u64 __seamcall(u64 fn, u64 rcx, u64 rdx, u64 r8, u64 r9,
+ struct tdx_module_output *out);
#endif
@@ -1,6 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0 */
#include <asm/asm-offsets.h>
#include <asm/tdx.h>
+#include <asm/asm.h>
/*
* TDCALL and SEAMCALL are supported in Binutils >= 2.36.
@@ -45,6 +46,7 @@
/* Leave input param 2 in RDX */
.if \host
+1:
seamcall
/*
* SEAMCALL instruction is essentially a VMExit from VMX root
@@ -57,10 +59,23 @@
* This value will never be used as actual SEAMCALL error code as
* it is from the Reserved status code class.
*/
- jnc .Lno_vmfailinvalid
+ jnc .Lseamcall_out
mov $TDX_SEAMCALL_VMFAILINVALID, %rax
-.Lno_vmfailinvalid:
+ jmp .Lseamcall_out
+2:
+ /*
+ * SEAMCALL caused #GP or #UD. By reaching here %eax contains
+ * the trap number. Convert the trap number to the TDX error
+ * code by setting TDX_SW_ERROR to the high 32-bits of %rax.
+ *
+ * Note cannot OR TDX_SW_ERROR directly to %rax as OR instruction
+ * only accepts 32-bit immediate at most.
+ */
+ mov $TDX_SW_ERROR, %r12
+ orq %r12, %rax
+ _ASM_EXTABLE_FAULT(1b, 2b)
+.Lseamcall_out:
.else
tdcall
.endif