[v2,5/5] iio: pressure: bmp280: Add nvmem operations for BMP580
Commit Message
The pressure sensor BMP580 contains a non-volatile memory that stores
trimming and configuration params. That memory provides an programmable
user range of three 2-byte words.
Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com>
Comments
On Mon, 26 Dec 2022 15:29:24 +0100
Angel Iglesias <ang.iglesiasg@gmail.com> wrote:
> The pressure sensor BMP580 contains a non-volatile memory that stores
> trimming and configuration params. That memory provides an programmable
> user range of three 2-byte words.
>
> Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com>
Not much in this one from me other than follow on from earlier patch.
Thanks,
Jonathan
>
> diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
> index 44901c6eb2f9..578d145be55d 100644
> --- a/drivers/iio/pressure/bmp280-core.c
> +++ b/drivers/iio/pressure/bmp280-core.c
> @@ -28,6 +28,7 @@
> #include <linux/bitfield.h>
> #include <linux/device.h>
> #include <linux/module.h>
> +#include <linux/nvmem-provider.h>
> #include <linux/regmap.h>
> #include <linux/delay.h>
> #include <linux/iio/iio.h>
> @@ -1628,8 +1629,140 @@ static const int bmp580_odr_table[][2] = {
> [BMP580_ODR_0_125HZ] = {0, 125000},
> };
>
> +const int bmp580_nvmem_addrs[] = { 0x20, 0x21, 0x22 };
> +
> +static int bmp580_nvmem_read(void *priv, unsigned int offset, void *val,
> + size_t bytes)
> +{
> + struct bmp280_data *data = priv;
> + u16 *dst = val;
> + int ret, addr;
> +
> + pm_runtime_get_sync(data->dev);
> + mutex_lock(&data->lock);
> +
> + /* Set sensor in standby mode */
> + ret = regmap_update_bits(data->regmap, BMP580_REG_ODR_CONFIG,
> + BMP580_MODE_MASK | BMP580_ODR_DEEPSLEEP_DIS,
> + BMP580_ODR_DEEPSLEEP_DIS |
> + FIELD_PREP(BMP580_MODE_MASK, BMP580_MODE_SLEEP));
> + if (ret) {
> + dev_err(data->dev, "failed to change sensor to standby mode\n");
> + goto exit;
> + }
> + /* Wait standby transition time */
> + usleep_range(2500, 3000);
> +
> + while (bytes >= sizeof(u16)) {
> + addr = bmp580_nvmem_addrs[offset / sizeof(u16)];
> +
> + ret = regmap_write(data->regmap, BMP580_REG_NVM_ADDR,
> + FIELD_PREP(BMP580_NVM_ROW_ADDR_MASK, addr));
> + if (ret) {
> + dev_err(data->dev, "error writing nvm address\n");
> + goto exit;
> + }
> +
> + ret = bmp580_cmd(data, BMP580_NVM_READ_CMD);
Ah. Here is the command being used. Good to pull that code forwards to this patch.
> + if (ret)
> + goto exit;
> +
> + ret = regmap_bulk_read(data->regmap, BMP580_REG_NVM_DATA_LSB, &data->le16,
> + sizeof(data->le16));
> + if (ret) {
> + dev_err(data->dev, "error reading nvm data regs\n");
> + goto exit;
> + }
> +
> + *dst++ = le16_to_cpu(data->le16);
> + bytes -= sizeof(u16);
sizeof(le16) seems more appropriate (obviously it's the same value).
> + offset += sizeof(u16);
> + }
> +exit:
> + /* Restore chip config */
> + data->chip_info->chip_config(data);
> + mutex_unlock(&data->lock);
> + pm_runtime_mark_last_busy(data->dev);
> + pm_runtime_put_autosuspend(data->dev);
> + return ret;
> +}
> +
> +static int bmp580_nvmem_write(void *priv, unsigned int offset, void *val,
> + size_t bytes)
> +{
> + struct bmp280_data *data = priv;
> + u16 *buf = val;
> + int ret, addr;
> +
> + pm_runtime_get_sync(data->dev);
> + mutex_lock(&data->lock);
> +
> + /* Set sensor in standby mode */
> + ret = regmap_update_bits(data->regmap, BMP580_REG_ODR_CONFIG,
> + BMP580_MODE_MASK | BMP580_ODR_DEEPSLEEP_DIS,
> + BMP580_ODR_DEEPSLEEP_DIS |
> + FIELD_PREP(BMP580_MODE_MASK, BMP580_MODE_SLEEP));
> + if (ret) {
> + dev_err(data->dev, "failed to change sensor to standby mode\n");
> + goto exit;
> + }
> + /* Wait standby transition time */
> + usleep_range(2500, 3000);
> +
> + while (bytes >= sizeof(u16)) {
> + addr = bmp580_nvmem_addrs[offset / sizeof(u16)];
> +
> + ret = regmap_write(data->regmap, BMP580_REG_NVM_ADDR, BMP580_NVM_PROG_EN |
> + FIELD_PREP(BMP580_NVM_ROW_ADDR_MASK, addr));
> + if (ret) {
> + dev_err(data->dev, "error writing nvm address\n");
> + goto exit;
> + }
> + data->le16 = cpu_to_le16(*buf++);
> +
> + ret = regmap_bulk_write(data->regmap, BMP580_REG_NVM_DATA_LSB, &data->le16,
> + sizeof(data->le16));
> + if (ret) {
> + dev_err(data->dev, "error writing LSB NVM data regs\n");
> + goto exit;
> + }
> +
> + ret = bmp580_cmd(data, BMP580_NVM_WRITE_CMD);
> + if (ret)
> + goto exit;
> +
> + /* Disable programming mode bit */
> + ret = regmap_update_bits(data->regmap, BMP580_REG_NVM_ADDR,
> + BMP580_NVM_PROG_EN, 0);
> + if (ret) {
> + dev_err(data->dev, "error resetting nvm write\n");
> + goto exit;
> + }
> +
> + bytes -= sizeof(u16);
As above, maybe sizeof(le16)
> + offset += sizeof(u16);
> + }
> +exit:
> + /* Restore chip config */
> + data->chip_info->chip_config(data);
> + mutex_unlock(&data->lock);
> + pm_runtime_mark_last_busy(data->dev);
> + pm_runtime_put_autosuspend(data->dev);
> + return ret;
> +}
> +
On Fri, 2022-12-30 at 18:49 +0000, Jonathan Cameron wrote:
> On Mon, 26 Dec 2022 15:29:24 +0100
> Angel Iglesias <ang.iglesiasg@gmail.com> wrote:
>
> > The pressure sensor BMP580 contains a non-volatile memory that stores
> > trimming and configuration params. That memory provides an programmable
> > user range of three 2-byte words.
> >
> > Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com>
>
> Not much in this one from me other than follow on from earlier patch.
> Thanks,
>
> Jonathan
>
> >
> > diff --git a/drivers/iio/pressure/bmp280-core.c
> > b/drivers/iio/pressure/bmp280-core.c
> > index 44901c6eb2f9..578d145be55d 100644
> > --- a/drivers/iio/pressure/bmp280-core.c
> > +++ b/drivers/iio/pressure/bmp280-core.c
> > @@ -28,6 +28,7 @@
> > #include <linux/bitfield.h>
> > #include <linux/device.h>
> > #include <linux/module.h>
> > +#include <linux/nvmem-provider.h>
> > #include <linux/regmap.h>
> > #include <linux/delay.h>
> > #include <linux/iio/iio.h>
> > @@ -1628,8 +1629,140 @@ static const int bmp580_odr_table[][2] = {
> > [BMP580_ODR_0_125HZ] = {0, 125000},
> > };
> >
> > +const int bmp580_nvmem_addrs[] = { 0x20, 0x21, 0x22 };
> > +
> > +static int bmp580_nvmem_read(void *priv, unsigned int offset, void *val,
> > + size_t bytes)
> > +{
> > + struct bmp280_data *data = priv;
> > + u16 *dst = val;
> > + int ret, addr;
> > +
> > + pm_runtime_get_sync(data->dev);
> > + mutex_lock(&data->lock);
> > +
> > + /* Set sensor in standby mode */
> > + ret = regmap_update_bits(data->regmap, BMP580_REG_ODR_CONFIG,
> > + BMP580_MODE_MASK |
> > BMP580_ODR_DEEPSLEEP_DIS,
> > + BMP580_ODR_DEEPSLEEP_DIS |
> > + FIELD_PREP(BMP580_MODE_MASK,
> > BMP580_MODE_SLEEP));
> > + if (ret) {
> > + dev_err(data->dev, "failed to change sensor to standby
> > mode\n");
> > + goto exit;
> > + }
> > + /* Wait standby transition time */
> > + usleep_range(2500, 3000);
> > +
> > + while (bytes >= sizeof(u16)) {
> > + addr = bmp580_nvmem_addrs[offset / sizeof(u16)];
> > +
> > + ret = regmap_write(data->regmap, BMP580_REG_NVM_ADDR,
> > + FIELD_PREP(BMP580_NVM_ROW_ADDR_MASK,
> > addr));
> > + if (ret) {
> > + dev_err(data->dev, "error writing nvm address\n");
> > + goto exit;
> > + }
> > +
> > + ret = bmp580_cmd(data, BMP580_NVM_READ_CMD);
> Ah. Here is the command being used. Good to pull that code forwards to this
> patch.
>
> > + if (ret)
> > + goto exit;
> > +
> > + ret = regmap_bulk_read(data->regmap,
> > BMP580_REG_NVM_DATA_LSB, &data->le16,
> > + sizeof(data->le16));
> > + if (ret) {
> > + dev_err(data->dev, "error reading nvm data regs\n");
> > + goto exit;
> > + }
> > +
> > + *dst++ = le16_to_cpu(data->le16);
> > + bytes -= sizeof(u16);
>
> sizeof(le16) seems more appropriate (obviously it's the same value).
>
> > + offset += sizeof(u16);
> > + }
> > +exit:
> > + /* Restore chip config */
> > + data->chip_info->chip_config(data);
> > + mutex_unlock(&data->lock);
> > + pm_runtime_mark_last_busy(data->dev);
> > + pm_runtime_put_autosuspend(data->dev);
> > + return ret;
> > +}
> > +
> > +static int bmp580_nvmem_write(void *priv, unsigned int offset, void *val,
> > + size_t bytes)
> > +{
> > + struct bmp280_data *data = priv;
> > + u16 *buf = val;
> > + int ret, addr;
> > +
> > + pm_runtime_get_sync(data->dev);
> > + mutex_lock(&data->lock);
> > +
> > + /* Set sensor in standby mode */
> > + ret = regmap_update_bits(data->regmap, BMP580_REG_ODR_CONFIG,
> > + BMP580_MODE_MASK |
> > BMP580_ODR_DEEPSLEEP_DIS,
> > + BMP580_ODR_DEEPSLEEP_DIS |
> > + FIELD_PREP(BMP580_MODE_MASK,
> > BMP580_MODE_SLEEP));
> > + if (ret) {
> > + dev_err(data->dev, "failed to change sensor to standby
> > mode\n");
> > + goto exit;
> > + }
> > + /* Wait standby transition time */
> > + usleep_range(2500, 3000);
> > +
> > + while (bytes >= sizeof(u16)) {
> > + addr = bmp580_nvmem_addrs[offset / sizeof(u16)];
> > +
> > + ret = regmap_write(data->regmap, BMP580_REG_NVM_ADDR,
> > BMP580_NVM_PROG_EN |
> > + FIELD_PREP(BMP580_NVM_ROW_ADDR_MASK,
> > addr));
> > + if (ret) {
> > + dev_err(data->dev, "error writing nvm address\n");
> > + goto exit;
> > + }
> > + data->le16 = cpu_to_le16(*buf++);
> > +
> > + ret = regmap_bulk_write(data->regmap,
> > BMP580_REG_NVM_DATA_LSB, &data->le16,
> > + sizeof(data->le16));
> > + if (ret) {
> > + dev_err(data->dev, "error writing LSB NVM data
> > regs\n");
> > + goto exit;
> > + }
> > +
> > + ret = bmp580_cmd(data, BMP580_NVM_WRITE_CMD);
> > + if (ret)
> > + goto exit;
> > +
> > + /* Disable programming mode bit */
> > + ret = regmap_update_bits(data->regmap, BMP580_REG_NVM_ADDR,
> > + BMP580_NVM_PROG_EN, 0);
> > + if (ret) {
> > + dev_err(data->dev, "error resetting nvm write\n");
> > + goto exit;
> > + }
> > +
> > + bytes -= sizeof(u16);
>
> As above, maybe sizeof(le16)
>
> > + offset += sizeof(u16);
> > + }
> > +exit:
> > + /* Restore chip config */
> > + data->chip_info->chip_config(data);
> > + mutex_unlock(&data->lock);
> > + pm_runtime_mark_last_busy(data->dev);
> > + pm_runtime_put_autosuspend(data->dev);
> > + return ret;
> > +}
> > +
>
>
Got it,
Thanks for your time,
Angel
@@ -28,6 +28,7 @@
#include <linux/bitfield.h>
#include <linux/device.h>
#include <linux/module.h>
+#include <linux/nvmem-provider.h>
#include <linux/regmap.h>
#include <linux/delay.h>
#include <linux/iio/iio.h>
@@ -1628,8 +1629,140 @@ static const int bmp580_odr_table[][2] = {
[BMP580_ODR_0_125HZ] = {0, 125000},
};
+const int bmp580_nvmem_addrs[] = { 0x20, 0x21, 0x22 };
+
+static int bmp580_nvmem_read(void *priv, unsigned int offset, void *val,
+ size_t bytes)
+{
+ struct bmp280_data *data = priv;
+ u16 *dst = val;
+ int ret, addr;
+
+ pm_runtime_get_sync(data->dev);
+ mutex_lock(&data->lock);
+
+ /* Set sensor in standby mode */
+ ret = regmap_update_bits(data->regmap, BMP580_REG_ODR_CONFIG,
+ BMP580_MODE_MASK | BMP580_ODR_DEEPSLEEP_DIS,
+ BMP580_ODR_DEEPSLEEP_DIS |
+ FIELD_PREP(BMP580_MODE_MASK, BMP580_MODE_SLEEP));
+ if (ret) {
+ dev_err(data->dev, "failed to change sensor to standby mode\n");
+ goto exit;
+ }
+ /* Wait standby transition time */
+ usleep_range(2500, 3000);
+
+ while (bytes >= sizeof(u16)) {
+ addr = bmp580_nvmem_addrs[offset / sizeof(u16)];
+
+ ret = regmap_write(data->regmap, BMP580_REG_NVM_ADDR,
+ FIELD_PREP(BMP580_NVM_ROW_ADDR_MASK, addr));
+ if (ret) {
+ dev_err(data->dev, "error writing nvm address\n");
+ goto exit;
+ }
+
+ ret = bmp580_cmd(data, BMP580_NVM_READ_CMD);
+ if (ret)
+ goto exit;
+
+ ret = regmap_bulk_read(data->regmap, BMP580_REG_NVM_DATA_LSB, &data->le16,
+ sizeof(data->le16));
+ if (ret) {
+ dev_err(data->dev, "error reading nvm data regs\n");
+ goto exit;
+ }
+
+ *dst++ = le16_to_cpu(data->le16);
+ bytes -= sizeof(u16);
+ offset += sizeof(u16);
+ }
+exit:
+ /* Restore chip config */
+ data->chip_info->chip_config(data);
+ mutex_unlock(&data->lock);
+ pm_runtime_mark_last_busy(data->dev);
+ pm_runtime_put_autosuspend(data->dev);
+ return ret;
+}
+
+static int bmp580_nvmem_write(void *priv, unsigned int offset, void *val,
+ size_t bytes)
+{
+ struct bmp280_data *data = priv;
+ u16 *buf = val;
+ int ret, addr;
+
+ pm_runtime_get_sync(data->dev);
+ mutex_lock(&data->lock);
+
+ /* Set sensor in standby mode */
+ ret = regmap_update_bits(data->regmap, BMP580_REG_ODR_CONFIG,
+ BMP580_MODE_MASK | BMP580_ODR_DEEPSLEEP_DIS,
+ BMP580_ODR_DEEPSLEEP_DIS |
+ FIELD_PREP(BMP580_MODE_MASK, BMP580_MODE_SLEEP));
+ if (ret) {
+ dev_err(data->dev, "failed to change sensor to standby mode\n");
+ goto exit;
+ }
+ /* Wait standby transition time */
+ usleep_range(2500, 3000);
+
+ while (bytes >= sizeof(u16)) {
+ addr = bmp580_nvmem_addrs[offset / sizeof(u16)];
+
+ ret = regmap_write(data->regmap, BMP580_REG_NVM_ADDR, BMP580_NVM_PROG_EN |
+ FIELD_PREP(BMP580_NVM_ROW_ADDR_MASK, addr));
+ if (ret) {
+ dev_err(data->dev, "error writing nvm address\n");
+ goto exit;
+ }
+ data->le16 = cpu_to_le16(*buf++);
+
+ ret = regmap_bulk_write(data->regmap, BMP580_REG_NVM_DATA_LSB, &data->le16,
+ sizeof(data->le16));
+ if (ret) {
+ dev_err(data->dev, "error writing LSB NVM data regs\n");
+ goto exit;
+ }
+
+ ret = bmp580_cmd(data, BMP580_NVM_WRITE_CMD);
+ if (ret)
+ goto exit;
+
+ /* Disable programming mode bit */
+ ret = regmap_update_bits(data->regmap, BMP580_REG_NVM_ADDR,
+ BMP580_NVM_PROG_EN, 0);
+ if (ret) {
+ dev_err(data->dev, "error resetting nvm write\n");
+ goto exit;
+ }
+
+ bytes -= sizeof(u16);
+ offset += sizeof(u16);
+ }
+exit:
+ /* Restore chip config */
+ data->chip_info->chip_config(data);
+ mutex_unlock(&data->lock);
+ pm_runtime_mark_last_busy(data->dev);
+ pm_runtime_put_autosuspend(data->dev);
+ return ret;
+}
+
static int bmp580_preinit(struct bmp280_data *data)
{
+ struct nvmem_config config = {
+ .dev = data->dev,
+ .priv = data,
+ .name = "bmp580_nvmem",
+ .word_size = sizeof(u16),
+ .stride = sizeof(u16),
+ .size = 3 * sizeof(u16),
+ .reg_read = bmp580_nvmem_read,
+ .reg_write = bmp580_nvmem_write,
+ };
unsigned int reg;
int ret;
@@ -1653,8 +1786,8 @@ static int bmp580_preinit(struct bmp280_data *data)
dev_err(data->dev, "preinit: nvm error on powerup sequence\n");
return -EIO;
}
-
- return 0;
+ /* Register nvmem device */
+ return PTR_ERR_OR_ZERO(devm_nvmem_register(config.dev, &config));
}
static int bmp580_chip_config(struct bmp280_data *data)
@@ -101,6 +101,9 @@
#define BMP580_FILTER_63X 6
#define BMP580_FILTER_127X 7
+#define BMP580_NVM_ROW_ADDR_MASK GENMASK(5, 0)
+#define BMP580_NVM_PROG_EN BIT(6)
+
#define BMP580_TEMP_SKIPPED 0x7f7f7f
#define BMP580_PRESS_SKIPPED 0x7f7f7f