[v5,04/10] phy: Add HDMI configuration options
Commit Message
Allow HDMI PHYs to be configured through the generic
functions through a custom structure added to the generic union.
The parameters added here are based on HDMI PHY
implementation practices. The current set of parameters
should cover the potential users.
Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
---
include/linux/phy/phy-hdmi.h | 38 ++++++++++++++++++++++++++++++++++++
include/linux/phy/phy.h | 7 ++++++-
2 files changed, 44 insertions(+), 1 deletion(-)
create mode 100644 include/linux/phy/phy-hdmi.h
new file mode 100644
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2022 NXP
+ */
+
+#ifndef __PHY_HDMI_H_
+#define __PHY_HDMI_H_
+
+/**
+ * Pixel Encoding as HDMI Specification
+ * RGB, YUV422, YUV444:HDMI Specification 1.4a Section 6.5
+ * YUV420: HDMI Specification 2.a Section 7.1
+ */
+enum hdmi_phy_colorspace {
+ HDMI_PHY_COLORSPACE_RGB, /* RGB 4:4:4 */
+ HDMI_PHY_COLORSPACE_YUV422, /* YCbCr 4:2:2 */
+ HDMI_PHY_COLORSPACE_YUV444, /* YCbCr 4:4:4 */
+ HDMI_PHY_COLORSPACE_YUV420, /* YCbCr 4:2:0 */
+ HDMI_PHY_COLORSPACE_RESERVED4,
+ HDMI_PHY_COLORSPACE_RESERVED5,
+ HDMI_PHY_COLORSPACE_RESERVED6,
+};
+
+/**
+ * struct phy_configure_opts_hdmi - HDMI configuration set
+ * @pixel_clk_rate: Pixel clock of video modes in KHz.
+ * @bpc: Maximum bits per color channel.
+ * @color_space: Colorspace in enum hdmi_phy_colorspace.
+ *
+ * This structure is used to represent the configuration state of a HDMI phy.
+ */
+struct phy_configure_opts_hdmi {
+ unsigned int pixel_clk_rate;
+ unsigned int bpc;
+ enum hdmi_phy_colorspace color_space;
+};
+
+#endif /* __PHY_HDMI_H_ */
@@ -17,6 +17,7 @@
#include <linux/regulator/consumer.h>
#include <linux/phy/phy-dp.h>
+#include <linux/phy/phy-hdmi.h>
#include <linux/phy/phy-lvds.h>
#include <linux/phy/phy-mipi-dphy.h>
@@ -42,7 +43,8 @@ enum phy_mode {
PHY_MODE_MIPI_DPHY,
PHY_MODE_SATA,
PHY_MODE_LVDS,
- PHY_MODE_DP
+ PHY_MODE_DP,
+ PHY_MODE_HDMI,
};
enum phy_media {
@@ -60,11 +62,14 @@ enum phy_media {
* the DisplayPort protocol.
* @lvds: Configuration set applicable for phys supporting
* the LVDS phy mode.
+ * @hdmi: Configuration set applicable for phys supporting
+ * the HDMI phy mode.
*/
union phy_configure_opts {
struct phy_configure_opts_mipi_dphy mipi_dphy;
struct phy_configure_opts_dp dp;
struct phy_configure_opts_lvds lvds;
+ struct phy_configure_opts_hdmi hdmi;
};
/**