[v6,07/17] dt-bindings: display: rockchip: convert analogix_dp-rockchip.txt to yaml
Commit Message
Convert analogix_dp-rockchip.txt to yaml.
Changed:
Add power-domains property
File name
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
.../display/rockchip/analogix_dp-rockchip.txt | 98 -----------------
.../rockchip/rockchip,analogix-dp.yaml | 103 ++++++++++++++++++
2 files changed, 103 insertions(+), 98 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
--
2.20.1
Comments
On Thu, 22 Dec 2022 15:27:35 +0100, Johan Jonker wrote:
> Convert analogix_dp-rockchip.txt to yaml.
>
> Changed:
> Add power-domains property
> File name
>
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
> ---
> .../display/rockchip/analogix_dp-rockchip.txt | 98 -----------------
> .../rockchip/rockchip,analogix-dp.yaml | 103 ++++++++++++++++++
> 2 files changed, 103 insertions(+), 98 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
> create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
>
Reviewed-by: Rob Herring <robh@kernel.org>
deleted file mode 100644
@@ -1,98 +0,0 @@
-Rockchip RK3288 specific extensions to the Analogix Display Port
-================================
-
-Required properties:
-- compatible: "rockchip,rk3288-dp",
- "rockchip,rk3399-edp";
-
-- reg: physical base address of the controller and length
-
-- clocks: from common clock binding: handle to dp clock.
- of memory mapped region.
-
-- clock-names: from common clock binding:
- Required elements: "dp" "pclk"
-
-- resets: Must contain an entry for each entry in reset-names.
- See ../reset/reset.txt for details.
-
-- pinctrl-names: Names corresponding to the chip hotplug pinctrl states.
-- pinctrl-0: pin-control mode. should be <&edp_hpd>
-
-- reset-names: Must include the name "dp"
-
-- rockchip,grf: this soc should set GRF regs, so need get grf here.
-
-- ports: there are 2 port nodes with endpoint definitions as defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt.
- Port 0: contained 2 endpoints, connecting to the output of vop.
- Port 1: contained 1 endpoint, connecting to the input of panel.
-
-Optional property for different chips:
-- clocks: from common clock binding: handle to grf_vio clock.
-
-- clock-names: from common clock binding:
- Required elements: "grf"
-
-For the below properties, please refer to Analogix DP binding document:
- * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
-- phys (required)
-- phy-names (required)
-- hpd-gpios (optional)
-- force-hpd (optional)
--------------------------------------------------------------------------------
-
-Example:
- dp-controller: dp@ff970000 {
- compatible = "rockchip,rk3288-dp";
- reg = <0xff970000 0x4000>;
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
- clock-names = "dp", "pclk";
- phys = <&dp_phy>;
- phy-names = "dp";
-
- rockchip,grf = <&grf>;
- resets = <&cru 111>;
- reset-names = "dp";
-
- pinctrl-names = "default";
- pinctrl-0 = <&edp_hpd>;
-
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- edp_in: port@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- edp_in_vopb: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&vopb_out_edp>;
- };
- edp_in_vopl: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&vopl_out_edp>;
- };
- };
-
- edp_out: port@1 {
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- edp_out_panel: endpoint {
- reg = <0>;
- remote-endpoint = <&panel_in_edp>
- };
- };
- };
- };
-
- pinctrl {
- edp {
- edp_hpd: edp-hpd {
- rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_none>;
- };
- };
- };
new file mode 100644
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,analogix-dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip specific extensions to the Analogix Display Port
+
+maintainers:
+ - Sandy Huang <hjc@rock-chips.com>
+ - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+ compatible:
+ enum:
+ - rockchip,rk3288-dp
+ - rockchip,rk3399-edp
+
+ clocks:
+ minItems: 2
+ maxItems: 3
+
+ clock-names:
+ minItems: 2
+ items:
+ - const: dp
+ - const: pclk
+ - const: grf
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: dp
+
+ rockchip,grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ This SoC makes use of GRF regs.
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - rockchip,grf
+
+allOf:
+ - $ref: /schemas/display/bridge/analogix,dp.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3288-cru.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ dp@ff970000 {
+ compatible = "rockchip,rk3288-dp";
+ reg = <0xff970000 0x4000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
+ clock-names = "dp", "pclk";
+ phys = <&dp_phy>;
+ phy-names = "dp";
+ resets = <&cru 111>;
+ reset-names = "dp";
+ rockchip,grf = <&grf>;
+ pinctrl-0 = <&edp_hpd>;
+ pinctrl-names = "default";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ edp_in: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ edp_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_edp>;
+ };
+ edp_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_edp>;
+ };
+ };
+
+ edp_out: port@1 {
+ reg = <1>;
+
+ edp_out_panel: endpoint {
+ remote-endpoint = <&panel_in_edp>;
+ };
+ };
+ };
+ };