[GIT,PULL] thermal changes for v6.3-rc1

  Hi Rafael,

please consider pulling:

The following changes since commit 3a151494dc04c76add577ae66e8a04f900638aaf:

   thermal/drivers/armada: Use strscpy() to instead of strncpy() 
(2023-01-06 14:14:48 +0100)

are available in the Git repository at:

   git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git 
tags/thermal-v6.3-rc1

for you to fetch changes up to 8c5ee9155f8ae133070b40ee4be03cafb35c188d:

   thermal/drivers/armada: Use the thermal_zone_get_crit_temp() 
(2023-01-24 12:37:56 +0100)

----------------------------------------------------------------
- Fix kerneldoc format errors for Rockchip, Mediatek and Uniphier
   (Randy Dunlap)

- Add the missing 'qcom,adc-tm7' compatible string in the dt-bindings
   (Krzysztof Kozlowski)

- Improve the calibration routine by relying on the nvmem to read the
   values and provide a set of fixes for the QCom tsens driver (Dmitry
   Baryshkov)

- Remove the duplicate interrupt setting routine in the QCom tsens
   driver (Daniel Lezcano)

- Fix a wrong loop condition in the i.MX SC thermal driver and add the
   iMX8QM sensors (Viorel Suman)

- Fix header inclusion asm-generic.h by asm.h for the
   qcom-spmi-adc-tm5 driver (Andy Shevchenko)

- Use the devm_platform_get_and_ioremap_resource() combo function in
   all the drivers where the conversion applies (Ye Xingchen)

- Replace a literal mask by an existing corresponding macro (Yangtao
   Li)

- Add support for MT7986 and MT7981 (Daniel Golle)

- Use thermal_zone_get_crit_temp() for the Armada thermal driver
   (Daniel Lezcano)

----------------------------------------------------------------
Andy Shevchenko (1):
       thermal/drivers/qcom-spmi-adc-tm5: Use asm intead of asm-generic

Daniel Golle (2):
       thermal/drivers/mtk: Use function pointer for raw_to_mcelsius
       thermal/drivers/mtk: Add support for MT7986 and MT7981

Daniel Lezcano (2):
       thermal/drivers/qcom: Remove duplicate set next trip point 
interrupt code
       thermal/drivers/armada: Use the thermal_zone_get_crit_temp()

Dmitry Baryshkov (14):
       dt-bindings: thermal: tsens: add msm8956 compat
       dt-bindings: thermal: tsens: support per-sensor calibration cells
       dt-bindings: thermal: tsens: add per-sensor cells for msm8974
       thermal/drivers/tsens: Drop unnecessary hw_ids
       thermal/drivers/tsens: Drop msm8976-specific defines
       thermal/drivers/tsens: Sort out msm8976 vs msm8956 data
       thermal/drivers/tsens: fix slope values for msm8939
       thermal/drivers/tsens: limit num_sensors to 9 for msm8939
       thermal/drivers/tsens: Support using nvmem cells for calibration data
       thermal/drivers/tsens: Support using nvmem cells for msm8974 
calibration
       thermal/drivers/tsens: Rework legacy calibration data parsers
       thermal/drivers/tsens: Drop single-cell code for mdm9607
       thermal/drivers/tsens: Drop single-cell code for msm8939
       thermal/drivers/tsens: Drop single-cell code for msm8976/msm8956

Krzysztof Kozlowski (1):
       dt-bindings: thermal: qcom-spmi-adc-tm5: add qcom,adc-tm7

Rafael J. Wysocki (1):
       Merge tag 'generic-trip-point' of 
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Randy Dunlap (3):
       thermal/drivers/mtk_thermal: Fix kernel-doc function name
       thermal/drivers/rockchip: Fix kernel-doc warnings
       thermal/drivers/uniphier: Use regular comment syntax

Viorel Suman (2):
       thermal/drivers/imx_sc_thermal: Fix the loop condition
       thermal/drivers/imx_sc_thermal: Add iMX8QM sensors

Yangtao Li (1):
       thermal/drivers/sun8i: Convert to use macro

ye xingchen (9):
       thermal/drivers/brcmstb_thermal: Use 
devm_platform_get_and_ioremap_resource()
       thermal/drivers/bcm2835: Use devm_platform_get_and_ioremap_resource()
       thermal/drivers/dove: Use devm_platform_get_and_ioremap_resource()
       thermal/drivers/armada: Use devm_platform_get_and_ioremap_resource()
       thermal/drivers/mtk_thermal: Use 
devm_platform_get_and_ioremap_resource()
       thermal/drivers/rockchip: Use 
devm_platform_get_and_ioremap_resource()
       thermal/drivers/thermal_mmio: Use 
devm_platform_get_and_ioremap_resource()
       thermal/drivers/kirkwood: Use 
devm_platform_get_and_ioremap_resource()
       thermal/drivers/spear: Use devm_platform_get_and_ioremap_resource()

  .../bindings/thermal/qcom-spmi-adc-tm5.yaml        |   1 +
  .../devicetree/bindings/thermal/qcom-tsens.yaml    | 153 ++++-
  drivers/thermal/armada_thermal.c                   |  42 +-
  drivers/thermal/broadcom/bcm2835_thermal.c         |   4 +-
  drivers/thermal/broadcom/brcmstb_thermal.c         |   4 +-
  drivers/thermal/dove_thermal.c                     |   7 +-
  drivers/thermal/imx_sc_thermal.c                   |   8 +-
  drivers/thermal/kirkwood_thermal.c                 |   4 +-
  drivers/thermal/mtk_thermal.c                      | 149 ++++-
  drivers/thermal/qcom/qcom-spmi-adc-tm5.c           |   3 +-
  drivers/thermal/qcom/tsens-v0_1.c                  | 655 
++++++---------------
  drivers/thermal/qcom/tsens-v1.c                    | 340 +++--------
  drivers/thermal/qcom/tsens.c                       | 219 +++++--
  drivers/thermal/qcom/tsens.h                       |  46 +-
  drivers/thermal/rockchip_thermal.c                 |  10 +-
  drivers/thermal/spear_thermal.c                    |   4 +-
  drivers/thermal/sun8i_thermal.c                    |   4 +-
  drivers/thermal/thermal_mmio.c                     |   4 +-
  drivers/thermal/uniphier_thermal.c                 |   2 +-
  19 files changed, 800 insertions(+), 859 deletions(-)
  

On Thu, Jan 26, 2023 at 5:19 PM Daniel Lezcano
<daniel.lezcano@linaro.org> wrote:
>
> Hi Rafael,
>
> please consider pulling:
>
> The following changes since commit 3a151494dc04c76add577ae66e8a04f900638aaf:
>
>    thermal/drivers/armada: Use strscpy() to instead of strncpy()
> (2023-01-06 14:14:48 +0100)
>
> are available in the Git repository at:
>
>    git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git
> tags/thermal-v6.3-rc1
>
> for you to fetch changes up to 8c5ee9155f8ae133070b40ee4be03cafb35c188d:
>
>    thermal/drivers/armada: Use the thermal_zone_get_crit_temp()
> (2023-01-24 12:37:56 +0100)
>
> ----------------------------------------------------------------
> - Fix kerneldoc format errors for Rockchip, Mediatek and Uniphier
>    (Randy Dunlap)
>
> - Add the missing 'qcom,adc-tm7' compatible string in the dt-bindings
>    (Krzysztof Kozlowski)
>
> - Improve the calibration routine by relying on the nvmem to read the
>    values and provide a set of fixes for the QCom tsens driver (Dmitry
>    Baryshkov)
>
> - Remove the duplicate interrupt setting routine in the QCom tsens
>    driver (Daniel Lezcano)
>
> - Fix a wrong loop condition in the i.MX SC thermal driver and add the
>    iMX8QM sensors (Viorel Suman)
>
> - Fix header inclusion asm-generic.h by asm.h for the
>    qcom-spmi-adc-tm5 driver (Andy Shevchenko)
>
> - Use the devm_platform_get_and_ioremap_resource() combo function in
>    all the drivers where the conversion applies (Ye Xingchen)
>
> - Replace a literal mask by an existing corresponding macro (Yangtao
>    Li)
>
> - Add support for MT7986 and MT7981 (Daniel Golle)
>
> - Use thermal_zone_get_crit_temp() for the Armada thermal driver
>    (Daniel Lezcano)
>
> ----------------------------------------------------------------
> Andy Shevchenko (1):
>        thermal/drivers/qcom-spmi-adc-tm5: Use asm intead of asm-generic
>
> Daniel Golle (2):
>        thermal/drivers/mtk: Use function pointer for raw_to_mcelsius
>        thermal/drivers/mtk: Add support for MT7986 and MT7981
>
> Daniel Lezcano (2):
>        thermal/drivers/qcom: Remove duplicate set next trip point
> interrupt code
>        thermal/drivers/armada: Use the thermal_zone_get_crit_temp()
>
> Dmitry Baryshkov (14):
>        dt-bindings: thermal: tsens: add msm8956 compat
>        dt-bindings: thermal: tsens: support per-sensor calibration cells
>        dt-bindings: thermal: tsens: add per-sensor cells for msm8974
>        thermal/drivers/tsens: Drop unnecessary hw_ids
>        thermal/drivers/tsens: Drop msm8976-specific defines
>        thermal/drivers/tsens: Sort out msm8976 vs msm8956 data
>        thermal/drivers/tsens: fix slope values for msm8939
>        thermal/drivers/tsens: limit num_sensors to 9 for msm8939
>        thermal/drivers/tsens: Support using nvmem cells for calibration data
>        thermal/drivers/tsens: Support using nvmem cells for msm8974
> calibration
>        thermal/drivers/tsens: Rework legacy calibration data parsers
>        thermal/drivers/tsens: Drop single-cell code for mdm9607
>        thermal/drivers/tsens: Drop single-cell code for msm8939
>        thermal/drivers/tsens: Drop single-cell code for msm8976/msm8956
>
> Krzysztof Kozlowski (1):
>        dt-bindings: thermal: qcom-spmi-adc-tm5: add qcom,adc-tm7
>
> Rafael J. Wysocki (1):
>        Merge tag 'generic-trip-point' of
> ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
>
> Randy Dunlap (3):
>        thermal/drivers/mtk_thermal: Fix kernel-doc function name
>        thermal/drivers/rockchip: Fix kernel-doc warnings
>        thermal/drivers/uniphier: Use regular comment syntax
>
> Viorel Suman (2):
>        thermal/drivers/imx_sc_thermal: Fix the loop condition
>        thermal/drivers/imx_sc_thermal: Add iMX8QM sensors
>
> Yangtao Li (1):
>        thermal/drivers/sun8i: Convert to use macro
>
> ye xingchen (9):
>        thermal/drivers/brcmstb_thermal: Use
> devm_platform_get_and_ioremap_resource()
>        thermal/drivers/bcm2835: Use devm_platform_get_and_ioremap_resource()
>        thermal/drivers/dove: Use devm_platform_get_and_ioremap_resource()
>        thermal/drivers/armada: Use devm_platform_get_and_ioremap_resource()
>        thermal/drivers/mtk_thermal: Use
> devm_platform_get_and_ioremap_resource()
>        thermal/drivers/rockchip: Use
> devm_platform_get_and_ioremap_resource()
>        thermal/drivers/thermal_mmio: Use
> devm_platform_get_and_ioremap_resource()
>        thermal/drivers/kirkwood: Use
> devm_platform_get_and_ioremap_resource()
>        thermal/drivers/spear: Use devm_platform_get_and_ioremap_resource()
>
>   .../bindings/thermal/qcom-spmi-adc-tm5.yaml        |   1 +
>   .../devicetree/bindings/thermal/qcom-tsens.yaml    | 153 ++++-
>   drivers/thermal/armada_thermal.c                   |  42 +-
>   drivers/thermal/broadcom/bcm2835_thermal.c         |   4 +-
>   drivers/thermal/broadcom/brcmstb_thermal.c         |   4 +-
>   drivers/thermal/dove_thermal.c                     |   7 +-
>   drivers/thermal/imx_sc_thermal.c                   |   8 +-
>   drivers/thermal/kirkwood_thermal.c                 |   4 +-
>   drivers/thermal/mtk_thermal.c                      | 149 ++++-
>   drivers/thermal/qcom/qcom-spmi-adc-tm5.c           |   3 +-
>   drivers/thermal/qcom/tsens-v0_1.c                  | 655
> ++++++---------------
>   drivers/thermal/qcom/tsens-v1.c                    | 340 +++--------
>   drivers/thermal/qcom/tsens.c                       | 219 +++++--
>   drivers/thermal/qcom/tsens.h                       |  46 +-
>   drivers/thermal/rockchip_thermal.c                 |  10 +-
>   drivers/thermal/spear_thermal.c                    |   4 +-
>   drivers/thermal/sun8i_thermal.c                    |   4 +-
>   drivers/thermal/thermal_mmio.c                     |   4 +-
>   drivers/thermal/uniphier_thermal.c                 |   2 +-
>   19 files changed, 800 insertions(+), 859 deletions(-)
>
> --

Pulled pushed into the linux-next branch in linux-pm.git.

If all goes well, I'll merge it into thermal on Monday.

Thanks!