diff mbox series

watchdog: qcom: Use devm_clk_get_enabled() helper

Message ID 7c2d5f3815949faf6d3a0237a7b5f272f00a7ae9.1672418969.git.christophe.jaillet@wanadoo.fr
State New
Headers
Series watchdog: qcom: Use devm_clk_get_enabled() helper |

Commit Message

Christophe JAILLET Dec. 30, 2022, 4:49 p.m. UTC 
  The devm_clk_get_enabled() helper:
   - calls devm_clk_get()
   - calls clk_prepare_enable() and registers what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids the need of a dedicated function used
with devm_add_action_or_reset().

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
---
 drivers/watchdog/qcom-wdt.c | 16 +---------------
 1 file changed, 1 insertion(+), 15 deletions(-)

Comments

Guenter Roeck Dec. 31, 2022, 6:08 a.m. UTC | #1 
On Fri, Dec 30, 2022 at 05:49:47PM +0100, Christophe JAILLET wrote:
> The devm_clk_get_enabled() helper:
>    - calls devm_clk_get()
>    - calls clk_prepare_enable() and registers what is needed in order to
>      call clk_disable_unprepare() when needed, as a managed resource.
> 
> This simplifies the code and avoids the need of a dedicated function used
> with devm_add_action_or_reset().
> 
> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
>  drivers/watchdog/qcom-wdt.c | 16 +---------------
>  1 file changed, 1 insertion(+), 15 deletions(-)
> 
> diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c
> index 0d2209c5eaca..d776474dcdf3 100644
> --- a/drivers/watchdog/qcom-wdt.c
> +++ b/drivers/watchdog/qcom-wdt.c
> @@ -175,11 +175,6 @@ static const struct watchdog_info qcom_wdt_pt_info = {
>  	.identity	= KBUILD_MODNAME,
>  };
>  
> -static void qcom_clk_disable_unprepare(void *data)
> -{
> -	clk_disable_unprepare(data);
> -}
> -
>  static const struct qcom_wdt_match_data match_data_apcs_tmr = {
>  	.offset = reg_offset_data_apcs_tmr,
>  	.pretimeout = false,
> @@ -226,21 +221,12 @@ static int qcom_wdt_probe(struct platform_device *pdev)
>  	if (IS_ERR(wdt->base))
>  		return PTR_ERR(wdt->base);
>  
> -	clk = devm_clk_get(dev, NULL);
> +	clk = devm_clk_get_enabled(dev, NULL);
>  	if (IS_ERR(clk)) {
>  		dev_err(dev, "failed to get input clock\n");
>  		return PTR_ERR(clk);
>  	}
>  
> -	ret = clk_prepare_enable(clk);
> -	if (ret) {
> -		dev_err(dev, "failed to setup clock\n");
> -		return ret;
> -	}
> -	ret = devm_add_action_or_reset(dev, qcom_clk_disable_unprepare, clk);
> -	if (ret)
> -		return ret;
> -
>  	/*
>  	 * We use the clock rate to calculate the max timeout, so ensure it's
>  	 * not zero to avoid a divide-by-zero exception.
> -- 
> 2.34.1
>
diff mbox series

Patch

diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c
index 0d2209c5eaca..d776474dcdf3 100644
--- a/drivers/watchdog/qcom-wdt.c
+++ b/drivers/watchdog/qcom-wdt.c
@@ -175,11 +175,6 @@  static const struct watchdog_info qcom_wdt_pt_info = {
 	.identity	= KBUILD_MODNAME,
 };
 
-static void qcom_clk_disable_unprepare(void *data)
-{
-	clk_disable_unprepare(data);
-}
-
 static const struct qcom_wdt_match_data match_data_apcs_tmr = {
 	.offset = reg_offset_data_apcs_tmr,
 	.pretimeout = false,
@@ -226,21 +221,12 @@  static int qcom_wdt_probe(struct platform_device *pdev)
 	if (IS_ERR(wdt->base))
 		return PTR_ERR(wdt->base);
 
-	clk = devm_clk_get(dev, NULL);
+	clk = devm_clk_get_enabled(dev, NULL);
 	if (IS_ERR(clk)) {
 		dev_err(dev, "failed to get input clock\n");
 		return PTR_ERR(clk);
 	}
 
-	ret = clk_prepare_enable(clk);
-	if (ret) {
-		dev_err(dev, "failed to setup clock\n");
-		return ret;
-	}
-	ret = devm_add_action_or_reset(dev, qcom_clk_disable_unprepare, clk);
-	if (ret)
-		return ret;
-
 	/*
 	 * We use the clock rate to calculate the max timeout, so ensure it's
 	 * not zero to avoid a divide-by-zero exception.