On Wed, Mar 29, 2023 at 12:45:37AM +0200, Andrew Lunn wrote:
> > @@ -146,11 +149,13 @@ core_write(struct mt7530_priv *priv, u32 reg, u32 val)
> > {
> > struct mii_bus *bus = priv->bus;
> >
> > - mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
> > + if (bus)
> > + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
> >
> > core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
> >
> > - mutex_unlock(&bus->mdio_lock);
> > + if (bus)
> > + mutex_unlock(&bus->mdio_lock);
> > }
>
> All this if (bus) is pretty ugly.
>
> First off, what is this mutex actually protecting? And why is the same
> protection not required for MMIO?
The mutex is protecting the MDIO bus. Each access to any register of the
MT753x switch requires at least two operations on the MDIO bus.
Hence if there is congruent access, e.g. due to PCS or PHY polling, this
can mess up and interfere with another ongoing register access sequence.
You may argue that we should just use regmap's locking API for that, as
it is done also when creating the pcs-mtk-lynxi instance. However, some
things like interrupt handling require more complex (as in: not covered
by regmap_update_bits) pseudo-atomic operations, so the idea was to keep
the locking just like it was before for MDIO-connected MT753x switches
and provide a lock-less regmap replacing the former mt7530_mii_write() and
mt7530_mii_read() functions.
If we use MMIO we can directly access the 32-bit wide registers and hence
do not require locking.
>
> If you have a convincing argument the mutex is not needed, please add
> two helpers:
>
> mt7530_mutex_lock(struct mt7530_priv *priv)
> mt7530_mutex_unlock(struct mt7530_priv *priv)
>
> and hide the if inside that. As part of the commit message, explain
> why the mutex is not needed for MDIO.
Ok, will do.
>
> Adding these helpers and changing all calls can be a preparation
> patch. It is the sort of patch which should be obviously correct.
Understood.
>
> > @@ -2588,6 +2664,8 @@ mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
> > case PHY_INTERFACE_MODE_NA:
> > case PHY_INTERFACE_MODE_1000BASEX:
> > case PHY_INTERFACE_MODE_2500BASEX:
> > + case PHY_INTERFACE_MODE_USXGMII:
> > + case PHY_INTERFACE_MODE_10GKR:
> > /* handled in SGMII PCS driver */
> > return 0;
> > default:
> > @@ -2712,7 +2790,9 @@ static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port,
> > * variants.
> > */
> > if (interface == PHY_INTERFACE_MODE_TRGMII ||
> > - (phy_interface_mode_is_8023z(interface))) {
> > + interface == PHY_INTERFACE_MODE_USXGMII ||
> > + interface == PHY_INTERFACE_MODE_10GKR ||
> > + phy_interface_mode_is_8023z(interface)) {
> > speed = SPEED_1000;
> > duplex = DUPLEX_FULL;
> > }
>
> This looks like something which should be in a separate patch.
Ok, I will put it into a separate patch before adding support for
MT7988 which is the only switch supporting those modes (and also
requiring them).
>
> > +static int mt7988_setup(struct dsa_switch *ds)
> > +{
> > + struct mt7530_priv *priv = ds->priv;
> > + u32 unused_pm = 0;
> > + int i;
> > +
> > + /* Reset the switch */
> > + reset_control_assert(priv->rstc);
> > + udelay(20);
> > + reset_control_deassert(priv->rstc);
> > + udelay(20);
> > +
> > + /* Reset the switch PHYs */
> > + mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_PHY_RST);
> > +
> > + /* BPDU to CPU port */
> > + mt7530_rmw(priv, MT7531_CFC, MT7531_CPU_PMAP_MASK,
> > + BIT(MT7988_CPU_PORT));
> > + mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK,
> > + MT753X_BPDU_CPU_ONLY);
> > +
> > + /* Enable and reset MIB counters */
> > + mt7530_mib_reset(ds);
> > +
> > + for (i = 0; i < MT7530_NUM_PORTS; i++) {
> > + /* Disable forwarding by default on all ports */
> > + mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
> > + PCR_MATRIX_CLR);
> > +
> > + mt7530_set(priv, MT7531_DBG_CNT(i), MT7531_DIS_CLR);
> > +
> > + if (dsa_is_unused_port(ds, i))
> > + unused_pm |= BIT(i);
> > + else if (dsa_is_cpu_port(ds, i))
> > + mt753x_cpu_port_enable(ds, i);
> > + else
> > + mt7530_port_disable(ds, i);
> > +
> > + /* Enable consistent egress tag */
> > + mt7530_rmw(priv, MT7530_PVC_P(i), PVC_EG_TAG_MASK,
> > + PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
> > + }
> > +
> > + ds->configure_vlan_while_not_filtering = true;
> > +
> > + /* Flush the FDB table */
> > + return mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL);
>
> Is this really specific to the mt7988?
While the setup function is somehow similar to mt7530_setup or
mt7531_setup there are also differences. It would be possible to
split this more, so more common parts can be shared, such as the
loop over the ports which is the same as for MT7531.
The way initial reset is carried out as well as setting up the CPU
port is specific to MT7988.
>
> Andrew
@@ -50,6 +50,14 @@ config NET_DSA_MT7530_MDIO
switch chips. Multi-chip module MT7530 in MT7621AT, MT7621DAT,
MT7621ST and MT7623AI SoCs is supported.
+config NET_DSA_MT7530_MMIO
+ tristate "MediaTek MT7988 built-in Ethernet switch support"
+ select NET_DSA_MT7530
+ depends on HAS_IOMEM
+ help
+ This enables support for the built-in Ethernet switch of the
+ MediaTek MT7988 SoC.
+
config NET_DSA_MV88E6060
tristate "Marvell 88E6060 ethernet switch chip support"
select NET_DSA_TAG_TRAILER
@@ -8,6 +8,7 @@ endif
obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o
obj-$(CONFIG_NET_DSA_MT7530) += mt7530.o
obj-$(CONFIG_NET_DSA_MT7530_MDIO) += mt7530-mdio.o
+obj-$(CONFIG_NET_DSA_MT7530_MMIO) += mt7530-mmio.o
obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
obj-$(CONFIG_NET_DSA_RZN1_A5PSW) += rzn1_a5psw.o
obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o
new file mode 100644
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <net/dsa.h>
+
+#include "mt7530.h"
+
+static const struct of_device_id mt7988_of_match[] = {
+ { .compatible = "mediatek,mt7988-switch", .data = &mt753x_table[ID_MT7988], },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, mt7988_of_match);
+
+static int
+mt7988_probe(struct platform_device *pdev)
+{
+ static struct regmap_config *sw_regmap_config;
+ struct mt7530_priv *priv;
+ void __iomem *base_addr;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ base_addr = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base_addr)) {
+ dev_err(&pdev->dev, "cannot request I/O memory space\n");
+ return -ENXIO;
+ }
+
+ sw_regmap_config = devm_kzalloc(&pdev->dev, sizeof(*sw_regmap_config), GFP_KERNEL);
+ if (!sw_regmap_config)
+ return -ENOMEM;
+
+ sw_regmap_config->name = "switch";
+ sw_regmap_config->reg_bits = 16;
+ sw_regmap_config->val_bits = 32;
+ sw_regmap_config->reg_stride = 4;
+ sw_regmap_config->reg_base = 0x0;
+ sw_regmap_config->max_register = 0x7ffc;
+ priv->regmap = devm_regmap_init_mmio(&pdev->dev, base_addr, sw_regmap_config);
+ if (IS_ERR(priv->regmap))
+ return PTR_ERR(priv->regmap);
+
+ priv->ds = devm_kzalloc(&pdev->dev, sizeof(*priv->ds), GFP_KERNEL);
+ if (!priv->ds)
+ return -ENOMEM;
+
+ priv->ds->dev = &pdev->dev;
+ priv->ds->num_ports = MT7530_NUM_PORTS;
+
+ priv->rstc = devm_reset_control_get(&pdev->dev, NULL);
+ if (IS_ERR(priv->rstc)) {
+ dev_err(&pdev->dev, "couldn't get reset line\n");
+ return PTR_ERR(priv->rstc);
+ }
+
+ /* Get the hardware identifier from the devicetree node.
+ * We will need it for some of the clock and regulator setup.
+ */
+ priv->info = of_device_get_match_data(&pdev->dev);
+ if (!priv->info)
+ return -EINVAL;
+
+ /* Sanity check if these required device operations are filled
+ * properly.
+ */
+ if (!priv->info->sw_setup || !priv->info->pad_setup ||
+ !priv->info->phy_read_c22 || !priv->info->phy_write_c22 ||
+ !priv->info->mac_port_get_caps ||
+ !priv->info->mac_port_config)
+ return -EINVAL;
+
+ priv->id = priv->info->id;
+ priv->bus = NULL;
+ priv->dev = &pdev->dev;
+ priv->ds->priv = priv;
+ priv->ds->ops = &mt7530_switch_ops;
+ mutex_init(&priv->reg_mutex);
+ dev_set_drvdata(&pdev->dev, priv);
+
+ return dsa_register_switch(priv->ds);
+}
+
+static int
+mt7988_remove(struct platform_device *pdev)
+{
+ struct mt7530_priv *priv = platform_get_drvdata(pdev);
+ int ret = 0;
+
+ if (!priv)
+ return 0;
+
+ ret = regulator_disable(priv->core_pwr);
+ if (ret < 0)
+ dev_err(priv->dev,
+ "Failed to disable core power: %d\n", ret);
+
+ ret = regulator_disable(priv->io_pwr);
+ if (ret < 0)
+ dev_err(priv->dev, "Failed to disable io pwr: %d\n",
+ ret);
+
+ if (priv->irq)
+ mt7530_free_irq(priv);
+
+ dsa_unregister_switch(priv->ds);
+
+ mutex_destroy(&priv->reg_mutex);
+
+ return 0;
+}
+
+static void mt7988_shutdown(struct platform_device *pdev)
+{
+ struct mt7530_priv *priv = platform_get_drvdata(pdev);
+
+ if (!priv)
+ return;
+
+ dsa_switch_shutdown(priv->ds);
+
+ dev_set_drvdata(&pdev->dev, NULL);
+}
+
+static struct platform_driver mt7988_platform_driver = {
+ .probe = mt7988_probe,
+ .remove = mt7988_remove,
+ .shutdown = mt7988_shutdown,
+ .driver = {
+ .name = "mt7988-switch",
+ .of_match_table = mt7988_of_match,
+ },
+};
+module_platform_driver(mt7988_platform_driver);
+
+MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
+MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch (MMIO)");
+MODULE_LICENSE("GPL");
@@ -117,6 +117,9 @@ core_write_mmd_indirect(struct mt7530_priv *priv, int prtad,
struct mii_bus *bus = priv->bus;
int ret;
+ if (!bus)
+ return 0;
+
/* Write the desired MMD Devad */
ret = bus->write(bus, 0, MII_MMD_CTRL, devad);
if (ret < 0)
@@ -146,11 +149,13 @@ core_write(struct mt7530_priv *priv, u32 reg, u32 val)
{
struct mii_bus *bus = priv->bus;
- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+ if (bus)
+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
- mutex_unlock(&bus->mdio_lock);
+ if (bus)
+ mutex_unlock(&bus->mdio_lock);
}
static void
@@ -159,6 +164,9 @@ core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set)
struct mii_bus *bus = priv->bus;
u32 val;
+ if (!bus)
+ return;
+
mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
val = core_read_mmd_indirect(priv, reg, MDIO_MMD_VEND2);
@@ -205,11 +213,13 @@ mt7530_write(struct mt7530_priv *priv, u32 reg, u32 val)
{
struct mii_bus *bus = priv->bus;
- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+ if (bus)
+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
mt7530_mii_write(priv, reg, val);
- mutex_unlock(&bus->mdio_lock);
+ if (bus)
+ mutex_unlock(&bus->mdio_lock);
}
static u32
@@ -221,14 +231,16 @@ _mt7530_unlocked_read(struct mt7530_dummy_poll *p)
static u32
_mt7530_read(struct mt7530_dummy_poll *p)
{
- struct mii_bus *bus = p->priv->bus;
+ struct mii_bus *bus = p->priv->bus;
u32 val;
- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+ if (bus)
+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
val = mt7530_mii_read(p->priv, p->reg);
- mutex_unlock(&bus->mdio_lock);
+ if (bus)
+ mutex_unlock(&bus->mdio_lock);
return val;
}
@@ -248,11 +260,13 @@ mt7530_rmw(struct mt7530_priv *priv, u32 reg,
{
struct mii_bus *bus = priv->bus;
- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+ if (bus)
+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
regmap_update_bits(priv->regmap, reg, mask, set);
- mutex_unlock(&bus->mdio_lock);
+ if (bus)
+ mutex_unlock(&bus->mdio_lock);
}
static void
@@ -603,7 +617,8 @@ mt7531_ind_c45_phy_read(struct mt7530_priv *priv, int port, int devad,
INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+ if (bus)
+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
!(val & MT7531_PHY_ACS_ST), 20, 100000);
@@ -636,7 +651,8 @@ mt7531_ind_c45_phy_read(struct mt7530_priv *priv, int port, int devad,
ret = val & MT7531_MDIO_RW_DATA_MASK;
out:
- mutex_unlock(&bus->mdio_lock);
+ if (bus)
+ mutex_unlock(&bus->mdio_lock);
return ret;
}
@@ -652,7 +668,8 @@ mt7531_ind_c45_phy_write(struct mt7530_priv *priv, int port, int devad,
INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+ if (bus)
+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
!(val & MT7531_PHY_ACS_ST), 20, 100000);
@@ -684,7 +701,8 @@ mt7531_ind_c45_phy_write(struct mt7530_priv *priv, int port, int devad,
}
out:
- mutex_unlock(&bus->mdio_lock);
+ if (bus)
+ mutex_unlock(&bus->mdio_lock);
return ret;
}
@@ -699,7 +717,8 @@ mt7531_ind_c22_phy_read(struct mt7530_priv *priv, int port, int regnum)
INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+ if (bus)
+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
!(val & MT7531_PHY_ACS_ST), 20, 100000);
@@ -722,7 +741,8 @@ mt7531_ind_c22_phy_read(struct mt7530_priv *priv, int port, int regnum)
ret = val & MT7531_MDIO_RW_DATA_MASK;
out:
- mutex_unlock(&bus->mdio_lock);
+ if (bus)
+ mutex_unlock(&bus->mdio_lock);
return ret;
}
@@ -738,7 +758,8 @@ mt7531_ind_c22_phy_write(struct mt7530_priv *priv, int port, int regnum,
INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+ if (bus)
+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
ret = readx_poll_timeout(_mt7530_unlocked_read, &p, reg,
!(reg & MT7531_PHY_ACS_ST), 20, 100000);
@@ -760,7 +781,8 @@ mt7531_ind_c22_phy_write(struct mt7530_priv *priv, int port, int regnum,
}
out:
- mutex_unlock(&bus->mdio_lock);
+ if (bus)
+ mutex_unlock(&bus->mdio_lock);
return ret;
}
@@ -1070,7 +1092,8 @@ mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
if (!dsa_is_cpu_port(ds, port))
return 0;
- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+ if (bus)
+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
val = mt7530_mii_read(priv, MT7530_GMACCR);
val &= ~MAX_RX_PKT_LEN_MASK;
@@ -1091,7 +1114,8 @@ mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
mt7530_mii_write(priv, MT7530_GMACCR, val);
- mutex_unlock(&bus->mdio_lock);
+ if (bus)
+ mutex_unlock(&bus->mdio_lock);
return 0;
}
@@ -1892,10 +1916,14 @@ mt7530_irq_thread_fn(int irq, void *dev_id)
u32 val;
int p;
- mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
+ if (priv->bus)
+ mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
+
val = mt7530_mii_read(priv, MT7530_SYS_INT_STS);
mt7530_mii_write(priv, MT7530_SYS_INT_STS, val);
- mutex_unlock(&priv->bus->mdio_lock);
+
+ if (priv->bus)
+ mutex_unlock(&priv->bus->mdio_lock);
for (p = 0; p < MT7530_NUM_PHYS; p++) {
if (BIT(p) & val) {
@@ -1968,6 +1996,47 @@ static const struct irq_domain_ops mt7530_irq_domain_ops = {
.xlate = irq_domain_xlate_onecell,
};
+static void
+mt7988_irq_mask(struct irq_data *d)
+{
+ struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
+
+ priv->irq_enable &= ~BIT(d->hwirq);
+ mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable);
+}
+
+static void
+mt7988_irq_unmask(struct irq_data *d)
+{
+ struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
+
+ priv->irq_enable |= BIT(d->hwirq);
+ mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable);
+}
+
+static struct irq_chip mt7988_irq_chip = {
+ .name = KBUILD_MODNAME,
+ .irq_mask = mt7988_irq_mask,
+ .irq_unmask = mt7988_irq_unmask,
+};
+
+static int
+mt7988_irq_map(struct irq_domain *domain, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ irq_set_chip_data(irq, domain->host_data);
+ irq_set_chip_and_handler(irq, &mt7988_irq_chip, handle_simple_irq);
+ irq_set_nested_thread(irq, true);
+ irq_set_noprobe(irq);
+
+ return 0;
+}
+
+static const struct irq_domain_ops mt7988_irq_domain_ops = {
+ .map = mt7988_irq_map,
+ .xlate = irq_domain_xlate_onecell,
+};
+
static void
mt7530_setup_mdio_irq(struct mt7530_priv *priv)
{
@@ -2002,8 +2071,15 @@ mt7530_setup_irq(struct mt7530_priv *priv)
return priv->irq ? : -EINVAL;
}
- priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS,
- &mt7530_irq_domain_ops, priv);
+ if (priv->id == ID_MT7988)
+ priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS,
+ &mt7988_irq_domain_ops,
+ priv);
+ else
+ priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS,
+ &mt7530_irq_domain_ops,
+ priv);
+
if (!priv->irq_domain) {
dev_err(dev, "failed to create IRQ domain\n");
return -ENOMEM;
@@ -2588,6 +2664,8 @@ mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
case PHY_INTERFACE_MODE_NA:
case PHY_INTERFACE_MODE_1000BASEX:
case PHY_INTERFACE_MODE_2500BASEX:
+ case PHY_INTERFACE_MODE_USXGMII:
+ case PHY_INTERFACE_MODE_10GKR:
/* handled in SGMII PCS driver */
return 0;
default:
@@ -2712,7 +2790,9 @@ static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port,
* variants.
*/
if (interface == PHY_INTERFACE_MODE_TRGMII ||
- (phy_interface_mode_is_8023z(interface))) {
+ interface == PHY_INTERFACE_MODE_USXGMII ||
+ interface == PHY_INTERFACE_MODE_10GKR ||
+ phy_interface_mode_is_8023z(interface)) {
speed = SPEED_1000;
duplex = DUPLEX_FULL;
}
@@ -2933,6 +3013,60 @@ static int mt753x_set_mac_eee(struct dsa_switch *ds, int port,
return 0;
}
+static int mt7988_pad_setup(struct dsa_switch *ds, phy_interface_t interface)
+{
+ return 0;
+}
+
+static int mt7988_setup(struct dsa_switch *ds)
+{
+ struct mt7530_priv *priv = ds->priv;
+ u32 unused_pm = 0;
+ int i;
+
+ /* Reset the switch */
+ reset_control_assert(priv->rstc);
+ udelay(20);
+ reset_control_deassert(priv->rstc);
+ udelay(20);
+
+ /* Reset the switch PHYs */
+ mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_PHY_RST);
+
+ /* BPDU to CPU port */
+ mt7530_rmw(priv, MT7531_CFC, MT7531_CPU_PMAP_MASK,
+ BIT(MT7988_CPU_PORT));
+ mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK,
+ MT753X_BPDU_CPU_ONLY);
+
+ /* Enable and reset MIB counters */
+ mt7530_mib_reset(ds);
+
+ for (i = 0; i < MT7530_NUM_PORTS; i++) {
+ /* Disable forwarding by default on all ports */
+ mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
+ PCR_MATRIX_CLR);
+
+ mt7530_set(priv, MT7531_DBG_CNT(i), MT7531_DIS_CLR);
+
+ if (dsa_is_unused_port(ds, i))
+ unused_pm |= BIT(i);
+ else if (dsa_is_cpu_port(ds, i))
+ mt753x_cpu_port_enable(ds, i);
+ else
+ mt7530_port_disable(ds, i);
+
+ /* Enable consistent egress tag */
+ mt7530_rmw(priv, MT7530_PVC_P(i), PVC_EG_TAG_MASK,
+ PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
+ }
+
+ ds->configure_vlan_while_not_filtering = true;
+
+ /* Flush the FDB table */
+ return mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL);
+}
+
const struct dsa_switch_ops mt7530_switch_ops = {
.get_tag_protocol = mtk_get_tag_protocol,
.setup = mt753x_setup,
@@ -3007,6 +3141,19 @@ const struct mt753x_info mt753x_table[] = {
.mac_port_get_caps = mt7531_mac_port_get_caps,
.mac_port_config = mt7531_mac_config,
},
+ [ID_MT7988] = {
+ .id = ID_MT7988,
+ .pcs_ops = &mt7530_pcs_ops,
+ .sw_setup = mt7988_setup,
+ .phy_read_c22 = mt7531_ind_c22_phy_read,
+ .phy_write_c22 = mt7531_ind_c22_phy_write,
+ .phy_read_c45 = mt7531_ind_c45_phy_read,
+ .phy_write_c45 = mt7531_ind_c45_phy_write,
+ .pad_setup = mt7988_pad_setup,
+ .cpu_port_config = mt7531_cpu_port_config,
+ .mac_port_get_caps = mt7531_mac_port_get_caps,
+ .mac_port_config = mt7531_mac_config,
+ },
};
EXPORT_SYMBOL_GPL(mt753x_table);
@@ -11,6 +11,8 @@
#define MT7530_NUM_FDB_RECORDS 2048
#define MT7530_ALL_MEMBERS 0xff
+#define MT7988_CPU_PORT 6
+
#define MTK_HDR_LEN 4
#define MT7530_MAX_MTU (15 * 1024 - ETH_HLEN - ETH_FCS_LEN - MTK_HDR_LEN)
@@ -18,6 +20,7 @@ enum mt753x_id {
ID_MT7530 = 0,
ID_MT7621 = 1,
ID_MT7531 = 2,
+ ID_MT7988 = 3,
};
#define NUM_TRGMII_CTRL 5
@@ -54,11 +57,11 @@ enum mt753x_id {
#define MT7531_MIRROR_PORT_SET(x) (((x) & MIRROR_MASK) << 16)
#define MT7531_CPU_PMAP_MASK GENMASK(7, 0)
-#define MT753X_MIRROR_REG(id) (((id) == ID_MT7531) ? \
+#define MT753X_MIRROR_REG(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \
MT7531_CFC : MT7530_MFC)
-#define MT753X_MIRROR_EN(id) (((id) == ID_MT7531) ? \
+#define MT753X_MIRROR_EN(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \
MT7531_MIRROR_EN : MIRROR_EN)
-#define MT753X_MIRROR_MASK(id) (((id) == ID_MT7531) ? \
+#define MT753X_MIRROR_MASK(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \
MT7531_MIRROR_MASK : MIRROR_MASK)
/* Registers for BPDU and PAE frame control*/
@@ -295,9 +298,8 @@ enum mt7530_vlan_port_acc_frm {
MT7531_FORCE_DPX | \
MT7531_FORCE_RX_FC | \
MT7531_FORCE_TX_FC)
-#define PMCR_FORCE_MODE_ID(id) (((id) == ID_MT7531) ? \
- MT7531_FORCE_MODE : \
- PMCR_FORCE_MODE)
+#define PMCR_FORCE_MODE_ID(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \
+ MT7531_FORCE_MODE : PMCR_FORCE_MODE)
#define PMCR_LINK_SETTINGS_MASK (PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \
PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \
PMCR_TX_FC_EN | PMCR_RX_FC_EN | \