[v5,1/2] thermal/drivers/mtk: use function pointer for raw_to_mcelsius
Commit Message
Instead of having if-else logic selecting either raw_to_mcelsius_v1 or
raw_to_mcelsius_v2 in mtk_thermal_bank_temperature introduce a function
pointer raw_to_mcelsius to struct mtk_thermal which is initialized in the
probe function.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
drivers/thermal/mtk_thermal.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
Comments
On 18/01/2023 16:40, Daniel Golle wrote:
> Instead of having if-else logic selecting either raw_to_mcelsius_v1 or
> raw_to_mcelsius_v2 in mtk_thermal_bank_temperature introduce a function
> pointer raw_to_mcelsius to struct mtk_thermal which is initialized in the
> probe function.
>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
> ---
> drivers/thermal/mtk_thermal.c | 17 ++++++++++-------
> 1 file changed, 10 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
> index 0084b76493d9a..992750ee09e62 100644
> --- a/drivers/thermal/mtk_thermal.c
> +++ b/drivers/thermal/mtk_thermal.c
> @@ -292,6 +292,8 @@ struct mtk_thermal {
>
> const struct mtk_thermal_data *conf;
> struct mtk_thermal_bank banks[MAX_NUM_ZONES];
> +
> + int (*raw_to_mcelsius)(struct mtk_thermal *mt, int sensno, s32 raw);
> };
>
> /* MT8183 thermal sensor data */
> @@ -656,13 +658,9 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
> for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) {
> raw = readl(mt->thermal_base + conf->msr[i]);
>
> - if (mt->conf->version == MTK_THERMAL_V1) {
> - temp = raw_to_mcelsius_v1(
> - mt, conf->bank_data[bank->id].sensors[i], raw);
> - } else {
> - temp = raw_to_mcelsius_v2(
> - mt, conf->bank_data[bank->id].sensors[i], raw);
> - }
> + temp = mt->raw_to_mcelsius(
> + mt, conf->bank_data[bank->id].sensors[i], raw);
> +
>
> /*
> * The first read of a sensor often contains very high bogus
> @@ -1075,6 +1073,11 @@ static int mtk_thermal_probe(struct platform_device *pdev)
> mtk_thermal_release_periodic_ts(mt, auxadc_base);
> }
>
> + if (mt->conf->version == MTK_THERMAL_V1)
> + mt->raw_to_mcelsius = raw_to_mcelsius_v1;
> + else
> + mt->raw_to_mcelsius = raw_to_mcelsius_v2;
> +
> for (ctrl_id = 0; ctrl_id < mt->conf->num_controller ; ctrl_id++)
> for (i = 0; i < mt->conf->num_banks; i++)
> mtk_thermal_init_bank(mt, i, apmixed_phys_base,
@@ -292,6 +292,8 @@ struct mtk_thermal {
const struct mtk_thermal_data *conf;
struct mtk_thermal_bank banks[MAX_NUM_ZONES];
+
+ int (*raw_to_mcelsius)(struct mtk_thermal *mt, int sensno, s32 raw);
};
/* MT8183 thermal sensor data */
@@ -656,13 +658,9 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) {
raw = readl(mt->thermal_base + conf->msr[i]);
- if (mt->conf->version == MTK_THERMAL_V1) {
- temp = raw_to_mcelsius_v1(
- mt, conf->bank_data[bank->id].sensors[i], raw);
- } else {
- temp = raw_to_mcelsius_v2(
- mt, conf->bank_data[bank->id].sensors[i], raw);
- }
+ temp = mt->raw_to_mcelsius(
+ mt, conf->bank_data[bank->id].sensors[i], raw);
+
/*
* The first read of a sensor often contains very high bogus
@@ -1075,6 +1073,11 @@ static int mtk_thermal_probe(struct platform_device *pdev)
mtk_thermal_release_periodic_ts(mt, auxadc_base);
}
+ if (mt->conf->version == MTK_THERMAL_V1)
+ mt->raw_to_mcelsius = raw_to_mcelsius_v1;
+ else
+ mt->raw_to_mcelsius = raw_to_mcelsius_v2;
+
for (ctrl_id = 0; ctrl_id < mt->conf->num_controller ; ctrl_id++)
for (i = 0; i < mt->conf->num_banks; i++)
mtk_thermal_init_bank(mt, i, apmixed_phys_base,