diff mbox series

[v2,1/5] dt-bindings: iio: Add KX132-1211 accelerometer

Message ID 68466b01b967efbdd1bf2de0747d35f28f94fddb.1682019544.git.mehdi.djait.k@gmail.com
State New
Headers
Series iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer |

Commit Message

Mehdi Djait April 20, 2023, 8:22 p.m. UTC 
  Extend the kionix,kx022a.yaml file to support the kx132-1211 device

Signed-off-by: Mehdi Djait <mehdi.djait.k@gmail.com>
---
v2:
- made the device name more specific from "kx132" to "kx132-1211"
- removed the output data-rates mentioned and replaced them with "variable 
output data-rates"

 .../devicetree/bindings/iio/accel/kionix,kx022a.yaml | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

Comments

Matti Vaittinen April 21, 2023, 3:36 a.m. UTC | #1 
On 4/20/23 23:22, Mehdi Djait wrote:
> Extend the kionix,kx022a.yaml file to support the kx132-1211 device
> 
> Signed-off-by: Mehdi Djait <mehdi.djait.k@gmail.com>

Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Krzysztof Kozlowski April 21, 2023, 8:12 a.m. UTC | #2 
On 20/04/2023 22:22, Mehdi Djait wrote:
> Extend the kionix,kx022a.yaml file to support the kx132-1211 device
> 
> Signed-off-by: Mehdi Djait <mehdi.djait.k@gmail.com>
> ---
> v2:
> - made the device name more specific from "kx132" to "kx132-1211"
> - removed the output data-rates mentioned and replaced them with "variable 
> output data-rates"

You missed Rob (and maybe other maintainers). I think he does not care,
but anyway - why not using just get_maintainers.pl? It does entire job
for you, no need to figure out any addresses.



Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
index 986df1a6ff0a..034b69614416 100644
--- a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
@@ -4,19 +4,21 @@ 
 $id: http://devicetree.org/schemas/iio/accel/kionix,kx022a.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ROHM/Kionix KX022A Accelerometer
+title: ROHM/Kionix KX022A and KX132-1211 Accelerometers
 
 maintainers:
   - Matti Vaittinen <mazziesaccount@gmail.com>
 
 description: |
-  KX022A is a 3-axis accelerometer supporting +/- 2G, 4G, 8G and 16G ranges,
-  output data-rates from 0.78Hz to 1600Hz and a hardware-fifo buffering.
-  KX022A can be accessed either via I2C or SPI.
+  KX022A and KX132-1211 are 3-axis accelerometers supporting +/- 2G, 4G, 8G and
+  16G ranges, variable output data-rates and a hardware-fifo buffering.
+  KX022A and KX132-1211 can be accessed either via I2C or SPI.
 
 properties:
   compatible:
-    const: kionix,kx022a
+    enum:
+      - kionix,kx022a
+      - kionix,kx132-1211
 
   reg:
     maxItems: 1