diff mbox series

[4/6] ARM: dts: bcm11351/21664: add UART, I2C node labels

Message ID	4c8bb3a725dad9048665d39d0ca728b52152e59e.1685127525.git.stano.jakubek@gmail.com
State	New
Headers	Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Date: Fri, 26 May 2023 21:30:08 +0200 From: Stanislav Jakubek <stano.jakubek@gmail.com> To: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Florian Fainelli <f.fainelli@gmail.com>, Ray Jui <rjui@broadcom.com>, Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH 4/6] ARM: dts: bcm11351/21664: add UART, I2C node labels Message-ID: <4c8bb3a725dad9048665d39d0ca728b52152e59e.1685127525.git.stano.jakubek@gmail.com> References: <cover.1685127525.git.stano.jakubek@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <cover.1685127525.git.stano.jakubek@gmail.com> Precedence: bulk
Series	ARM: dts: bcm-mobile: DT cleanup \| [0/6] ARM: dts: bcm-mobile: DT cleanup [1/6] ARM: dts: bcm-mobile: change "" includes to <> where applicable [2/6] ARM: dts: bcm21664/23550: use CCU compatibles directly [3/6] ARM: dts: bcm-mobile: move status properties to the end of nodes [4/6] ARM: dts: bcm11351/21664: add UART, I2C node labels [5/6] ARM: dts: bcm21664-garnet: use node labels [6/6] ARM: dts: bcm28155-ap: use node labels

Commit Message

Stanislav Jakubek May 26, 2023, 7:30 p.m. UTC

  Add node labels to serial (UART) and I2C nodes for BCM11351 and BCM21664.

Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
---
 arch/arm/boot/dts/bcm11351.dtsi | 16 ++++++++--------
 arch/arm/boot/dts/bcm21664.dtsi | 14 +++++++-------
 2 files changed, 15 insertions(+), 15 deletions(-)

Comments

Florian Fainelli June 8, 2023, 10:10 p.m. UTC | #1

From: Florian Fainelli <f.fainelli@gmail.com>

On Fri, 26 May 2023 21:30:08 +0200, Stanislav Jakubek <stano.jakubek@gmail.com> wrote:
> Add node labels to serial (UART) and I2C nodes for BCM11351 and BCM21664.
> 
> Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian

diff mbox series

Patch

diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index 773d717de7f0..b271a9bf06a9 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -49,7 +49,7 @@  smc@3404c000 {
 		reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
 	};
 
-	serial@3e000000 {
+	uartb: serial@3e000000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
 		reg = <0x3e000000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB>;
@@ -59,7 +59,7 @@  serial@3e000000 {
 		status = "disabled";
 	};
 
-	serial@3e001000 {
+	uartb2: serial@3e001000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
 		reg = <0x3e001000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB2>;
@@ -69,7 +69,7 @@  serial@3e001000 {
 		status = "disabled";
 	};
 
-	serial@3e002000 {
+	uartb3: serial@3e002000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
 		reg = <0x3e002000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
@@ -79,7 +79,7 @@  serial@3e002000 {
 		status = "disabled";
 	};
 
-	serial@3e003000 {
+	uartb4: serial@3e003000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
 		reg = <0x3e003000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB4>;
@@ -161,7 +161,7 @@  pinctrl@35004800 {
 		reg = <0x35004800 0x430>;
 	};
 
-	i2c@3e016000 {
+	bsc1: i2c@3e016000 {
 		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
 		reg = <0x3e016000 0x80>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
@@ -171,7 +171,7 @@  i2c@3e016000 {
 		status = "disabled";
 	};
 
-	i2c@3e017000 {
+	bsc2: i2c@3e017000 {
 		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
 		reg = <0x3e017000 0x80>;
 		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
@@ -181,7 +181,7 @@  i2c@3e017000 {
 		status = "disabled";
 	};
 
-	i2c@3e018000 {
+	bsc3: i2c@3e018000 {
 		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
 		reg = <0x3e018000 0x80>;
 		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
@@ -191,7 +191,7 @@  i2c@3e018000 {
 		status = "disabled";
 	};
 
-	i2c@3500d000 {
+	pmu_bsc: i2c@3500d000 {
 		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
 		reg = <0x3500d000 0x80>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi
index 9e3835a0a7ef..2eb7f5b0c1dc 100644
--- a/arch/arm/boot/dts/bcm21664.dtsi
+++ b/arch/arm/boot/dts/bcm21664.dtsi
@@ -49,7 +49,7 @@  smc@3404e000 {
 		reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */
 	};
 
-	serial@3e000000 {
+	uartb: serial@3e000000 {
 		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
 		reg = <0x3e000000 0x118>;
 		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
@@ -59,7 +59,7 @@  serial@3e000000 {
 		status = "disabled";
 	};
 
-	serial@3e001000 {
+	uartb2: serial@3e001000 {
 		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
 		reg = <0x3e001000 0x118>;
 		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
@@ -69,7 +69,7 @@  serial@3e001000 {
 		status = "disabled";
 	};
 
-	serial@3e002000 {
+	uartb3: serial@3e002000 {
 		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
 		reg = <0x3e002000 0x118>;
 		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
@@ -144,7 +144,7 @@  sdio4: mmc@3f1b0000 {
 		status = "disabled";
 	};
 
-	i2c@3e016000 {
+	bsc1: i2c@3e016000 {
 		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
 		reg = <0x3e016000 0x70>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
@@ -154,7 +154,7 @@  i2c@3e016000 {
 		status = "disabled";
 	};
 
-	i2c@3e017000 {
+	bsc2: i2c@3e017000 {
 		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
 		reg = <0x3e017000 0x70>;
 		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
@@ -164,7 +164,7 @@  i2c@3e017000 {
 		status = "disabled";
 	};
 
-	i2c@3e018000 {
+	bsc3: i2c@3e018000 {
 		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
 		reg = <0x3e018000 0x70>;
 		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
@@ -174,7 +174,7 @@  i2c@3e018000 {
 		status = "disabled";
 	};
 
-	i2c@3e01c000 {
+	bsc4: i2c@3e01c000 {
 		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
 		reg = <0x3e01c000 0x70>;
 		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;