diff mbox series

[4/9] clk: qcom: ipq5332: Fix USB related clock defines

Message ID 3840e5b5795ef55ecbf25d0faa8c328f09c6d976.1686126439.git.quic_varada@quicinc.com
State New
Headers
Series Enable IPQ5332 USB2 |

Commit Message

Varadarajan Narayanan June 7, 2023, 10:56 a.m. UTC 
  Fix the USB related clock defines and add details
referenced by them

Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
 drivers/clk/qcom/gcc-ipq5332.c | 34 +++++++++++++++++++++++-----------
 1 file changed, 23 insertions(+), 11 deletions(-)

Comments

Dmitry Baryshkov June 7, 2023, 11:19 a.m. UTC | #1 
On 07/06/2023 13:56, Varadarajan Narayanan wrote:
> Fix the USB related clock defines and add details
> referenced by them
> 
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> ---
>   drivers/clk/qcom/gcc-ipq5332.c | 34 +++++++++++++++++++++++-----------
>   1 file changed, 23 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/clk/qcom/gcc-ipq5332.c b/drivers/clk/qcom/gcc-ipq5332.c
> index a75ab88..2b58558 100644
> --- a/drivers/clk/qcom/gcc-ipq5332.c
> +++ b/drivers/clk/qcom/gcc-ipq5332.c
> @@ -351,6 +351,16 @@ static const struct freq_tbl ftbl_gcc_adss_pwm_clk_src[] = {
>   	{ }
>   };
>   
> +static const struct clk_parent_data gcc_usb3phy_0_cc_pipe_clk_xo[] = {
> +	{ .fw_name = "usb3phy_0_cc_pipe_clk" },
> +	{ .fw_name = "xo" },

gcc-ipq5332 uses DT indices, please don't mix that with .fw_name.

> +};
> +
> +static const struct parent_map gcc_usb3phy_0_cc_pipe_clk_xo_map[] = {
> +	{ P_USB3PHY_0_PIPE, 0 },
> +	{ P_XO, 2 },
> +};
> +
>   static struct clk_rcg2 gcc_adss_pwm_clk_src = {
>   	.cmd_rcgr = 0x1c004,
>   	.mnd_width = 0,
> @@ -1101,16 +1111,18 @@ static struct clk_rcg2 gcc_usb0_mock_utmi_clk_src = {
>   	},
>   };
>   
> -static struct clk_regmap_phy_mux gcc_usb0_pipe_clk_src = {
> +static struct clk_regmap_mux usb0_pipe_clk_src = {
>   	.reg = 0x2c074,
> +	.shift = 8,
> +	.width = 2,
> +	.parent_map = gcc_usb3phy_0_cc_pipe_clk_xo_map,
>   	.clkr = {
> -		.hw.init = &(struct clk_init_data) {
> -			.name = "gcc_usb0_pipe_clk_src",
> -			.parent_data = &(const struct clk_parent_data) {
> -				.index = DT_USB_PCIE_WRAPPER_PIPE_CLK,
> -			},
> -			.num_parents = 1,
> -			.ops = &clk_regmap_phy_mux_ops,
> +		.hw.init = &(const struct clk_init_data){
> +			.name = "usb0phy_0_cc_pipe_clk_src",
> +			.parent_data = gcc_usb3phy_0_cc_pipe_clk_xo,
> +			.num_parents = 2,
> +			.ops = &clk_regmap_mux_closest_ops,
> +			.flags = CLK_SET_RATE_PARENT,
>   		},

Soo... As you are reverting this. Is USB0 PIPE clock required to be 
parked to the XO? I was going to write 'before turning USB0_GDSC' off, 
but then I noticed that gcc-ipq5332 doesn't declare GDSCs. Does this 
platform have GDSCs?

>   	},
>   };
> @@ -3041,8 +3053,8 @@ static struct clk_branch gcc_usb0_pipe_clk = {
>   		.enable_mask = BIT(0),
>   		.hw.init = &(const struct clk_init_data) {
>   			.name = "gcc_usb0_pipe_clk",
> -			.parent_hws = (const struct clk_hw*[]) {
> -				&gcc_usb0_pipe_clk_src.clkr.hw,
> +			.parent_names = (const char *[]){
> +				"usb0_pipe_clk_src"

complete and definitive NAK. Do not use parent_names, we have just 
stopped migrating from them.

>   			},
>   			.num_parents = 1,
>   			.flags = CLK_SET_RATE_PARENT,
> @@ -3580,7 +3592,7 @@ static struct clk_regmap *gcc_ipq5332_clocks[] = {
>   	[GCC_PCIE3X2_PIPE_CLK_SRC] = &gcc_pcie3x2_pipe_clk_src.clkr,
>   	[GCC_PCIE3X1_0_PIPE_CLK_SRC] = &gcc_pcie3x1_0_pipe_clk_src.clkr,
>   	[GCC_PCIE3X1_1_PIPE_CLK_SRC] = &gcc_pcie3x1_1_pipe_clk_src.clkr,
> -	[GCC_USB0_PIPE_CLK_SRC] = &gcc_usb0_pipe_clk_src.clkr,
> +	[GCC_USB0_PIPE_CLK_SRC] = &usb0_pipe_clk_src.clkr,
>   };
>   
>   static const struct qcom_reset_map gcc_ipq5332_resets[] = {
Varadarajan Narayanan June 15, 2023, 6:02 a.m. UTC | #2 
On Wed, Jun 07, 2023 at 02:19:09PM +0300, Dmitry Baryshkov wrote:
> On 07/06/2023 13:56, Varadarajan Narayanan wrote:
> >Fix the USB related clock defines and add details
> >referenced by them
> >
> >Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> >---
> >  drivers/clk/qcom/gcc-ipq5332.c | 34 +++++++++++++++++++++++-----------
> >  1 file changed, 23 insertions(+), 11 deletions(-)
> >
> >diff --git a/drivers/clk/qcom/gcc-ipq5332.c b/drivers/clk/qcom/gcc-ipq5332.c
> >index a75ab88..2b58558 100644
> >--- a/drivers/clk/qcom/gcc-ipq5332.c
> >+++ b/drivers/clk/qcom/gcc-ipq5332.c
> >@@ -351,6 +351,16 @@ static const struct freq_tbl ftbl_gcc_adss_pwm_clk_src[] = {
> >  	{ }
> >  };
> >+static const struct clk_parent_data gcc_usb3phy_0_cc_pipe_clk_xo[] = {
> >+	{ .fw_name = "usb3phy_0_cc_pipe_clk" },
> >+	{ .fw_name = "xo" },
>
> gcc-ipq5332 uses DT indices, please don't mix that with .fw_name.
>
> >+};
> >+
> >+static const struct parent_map gcc_usb3phy_0_cc_pipe_clk_xo_map[] = {
> >+	{ P_USB3PHY_0_PIPE, 0 },
> >+	{ P_XO, 2 },
> >+};
> >+
> >  static struct clk_rcg2 gcc_adss_pwm_clk_src = {
> >  	.cmd_rcgr = 0x1c004,
> >  	.mnd_width = 0,
> >@@ -1101,16 +1111,18 @@ static struct clk_rcg2 gcc_usb0_mock_utmi_clk_src = {
> >  	},
> >  };
> >-static struct clk_regmap_phy_mux gcc_usb0_pipe_clk_src = {
> >+static struct clk_regmap_mux usb0_pipe_clk_src = {
> >  	.reg = 0x2c074,
> >+	.shift = 8,
> >+	.width = 2,
> >+	.parent_map = gcc_usb3phy_0_cc_pipe_clk_xo_map,
> >  	.clkr = {
> >-		.hw.init = &(struct clk_init_data) {
> >-			.name = "gcc_usb0_pipe_clk_src",
> >-			.parent_data = &(const struct clk_parent_data) {
> >-				.index = DT_USB_PCIE_WRAPPER_PIPE_CLK,
> >-			},
> >-			.num_parents = 1,
> >-			.ops = &clk_regmap_phy_mux_ops,
> >+		.hw.init = &(const struct clk_init_data){
> >+			.name = "usb0phy_0_cc_pipe_clk_src",
> >+			.parent_data = gcc_usb3phy_0_cc_pipe_clk_xo,
> >+			.num_parents = 2,
> >+			.ops = &clk_regmap_mux_closest_ops,
> >+			.flags = CLK_SET_RATE_PARENT,
> >  		},
>
> Soo... As you are reverting this. Is USB0 PIPE clock required to be parked
> to the XO? I was going to write 'before turning USB0_GDSC' off, but then I
> noticed that gcc-ipq5332 doesn't declare GDSCs. Does this platform have
> GDSCs?
>
> >  	},
> >  };
> >@@ -3041,8 +3053,8 @@ static struct clk_branch gcc_usb0_pipe_clk = {
> >  		.enable_mask = BIT(0),
> >  		.hw.init = &(const struct clk_init_data) {
> >  			.name = "gcc_usb0_pipe_clk",
> >-			.parent_hws = (const struct clk_hw*[]) {
> >-				&gcc_usb0_pipe_clk_src.clkr.hw,
> >+			.parent_names = (const char *[]){
> >+				"usb0_pipe_clk_src"
>
> complete and definitive NAK. Do not use parent_names, we have just stopped
> migrating from them.

Will drop changes to this file and post a new patch.

Thanks
Varada
> >  			},
> >  			.num_parents = 1,
> >  			.flags = CLK_SET_RATE_PARENT,
> >@@ -3580,7 +3592,7 @@ static struct clk_regmap *gcc_ipq5332_clocks[] = {
> >  	[GCC_PCIE3X2_PIPE_CLK_SRC] = &gcc_pcie3x2_pipe_clk_src.clkr,
> >  	[GCC_PCIE3X1_0_PIPE_CLK_SRC] = &gcc_pcie3x1_0_pipe_clk_src.clkr,
> >  	[GCC_PCIE3X1_1_PIPE_CLK_SRC] = &gcc_pcie3x1_1_pipe_clk_src.clkr,
> >-	[GCC_USB0_PIPE_CLK_SRC] = &gcc_usb0_pipe_clk_src.clkr,
> >+	[GCC_USB0_PIPE_CLK_SRC] = &usb0_pipe_clk_src.clkr,
> >  };
> >  static const struct qcom_reset_map gcc_ipq5332_resets[] = {
>
> --
> With best wishes
> Dmitry
>
diff mbox series

Patch

diff --git a/drivers/clk/qcom/gcc-ipq5332.c b/drivers/clk/qcom/gcc-ipq5332.c
index a75ab88..2b58558 100644
--- a/drivers/clk/qcom/gcc-ipq5332.c
+++ b/drivers/clk/qcom/gcc-ipq5332.c
@@ -351,6 +351,16 @@  static const struct freq_tbl ftbl_gcc_adss_pwm_clk_src[] = {
 	{ }
 };
 
+static const struct clk_parent_data gcc_usb3phy_0_cc_pipe_clk_xo[] = {
+	{ .fw_name = "usb3phy_0_cc_pipe_clk" },
+	{ .fw_name = "xo" },
+};
+
+static const struct parent_map gcc_usb3phy_0_cc_pipe_clk_xo_map[] = {
+	{ P_USB3PHY_0_PIPE, 0 },
+	{ P_XO, 2 },
+};
+
 static struct clk_rcg2 gcc_adss_pwm_clk_src = {
 	.cmd_rcgr = 0x1c004,
 	.mnd_width = 0,
@@ -1101,16 +1111,18 @@  static struct clk_rcg2 gcc_usb0_mock_utmi_clk_src = {
 	},
 };
 
-static struct clk_regmap_phy_mux gcc_usb0_pipe_clk_src = {
+static struct clk_regmap_mux usb0_pipe_clk_src = {
 	.reg = 0x2c074,
+	.shift = 8,
+	.width = 2,
+	.parent_map = gcc_usb3phy_0_cc_pipe_clk_xo_map,
 	.clkr = {
-		.hw.init = &(struct clk_init_data) {
-			.name = "gcc_usb0_pipe_clk_src",
-			.parent_data = &(const struct clk_parent_data) {
-				.index = DT_USB_PCIE_WRAPPER_PIPE_CLK,
-			},
-			.num_parents = 1,
-			.ops = &clk_regmap_phy_mux_ops,
+		.hw.init = &(const struct clk_init_data){
+			.name = "usb0phy_0_cc_pipe_clk_src",
+			.parent_data = gcc_usb3phy_0_cc_pipe_clk_xo,
+			.num_parents = 2,
+			.ops = &clk_regmap_mux_closest_ops,
+			.flags = CLK_SET_RATE_PARENT,
 		},
 	},
 };
@@ -3041,8 +3053,8 @@  static struct clk_branch gcc_usb0_pipe_clk = {
 		.enable_mask = BIT(0),
 		.hw.init = &(const struct clk_init_data) {
 			.name = "gcc_usb0_pipe_clk",
-			.parent_hws = (const struct clk_hw*[]) {
-				&gcc_usb0_pipe_clk_src.clkr.hw,
+			.parent_names = (const char *[]){
+				"usb0_pipe_clk_src"
 			},
 			.num_parents = 1,
 			.flags = CLK_SET_RATE_PARENT,
@@ -3580,7 +3592,7 @@  static struct clk_regmap *gcc_ipq5332_clocks[] = {
 	[GCC_PCIE3X2_PIPE_CLK_SRC] = &gcc_pcie3x2_pipe_clk_src.clkr,
 	[GCC_PCIE3X1_0_PIPE_CLK_SRC] = &gcc_pcie3x1_0_pipe_clk_src.clkr,
 	[GCC_PCIE3X1_1_PIPE_CLK_SRC] = &gcc_pcie3x1_1_pipe_clk_src.clkr,
-	[GCC_USB0_PIPE_CLK_SRC] = &gcc_usb0_pipe_clk_src.clkr,
+	[GCC_USB0_PIPE_CLK_SRC] = &usb0_pipe_clk_src.clkr,
 };
 
 static const struct qcom_reset_map gcc_ipq5332_resets[] = {