diff mbox series

[v3,3/7] arm64: dts: ti: iot2050: Factor out arduino connector bits

Message ID 3366367dc9f190c9e21027b9a810886791e99245.1707463401.git.jan.kiszka@siemens.com
State New
Headers
Series arm64: dts: iot2050: Add support for new SM variant |

Commit Message

Jan Kiszka Feb. 9, 2024, 7:23 a.m. UTC 
  From: Jan Kiszka <jan.kiszka@siemens.com>

A new variant is to be added which will not have a arduino connector
like the existing ones. Factor out all bits that are specific to this
connector.

The split is not perfect because wkup_gpio0 is defined based on what is
common to all variants having the connector, thus containing also
connector-unrelated information. But this is still cleaner than
replicating this node into all 4 variants.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
 .../ti/k3-am65-iot2050-arduino-connector.dtsi | 768 ++++++++++++++++++
 .../boot/dts/ti/k3-am65-iot2050-common.dtsi   | 753 -----------------
 .../ti/k3-am6528-iot2050-basic-common.dtsi    |   1 +
 .../dts/ti/k3-am6548-iot2050-advanced-m2.dts  |   1 +
 .../dts/ti/k3-am6548-iot2050-advanced-pg2.dts |   1 +
 .../dts/ti/k3-am6548-iot2050-advanced.dts     |   1 +
 6 files changed, 772 insertions(+), 753 deletions(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am65-iot2050-arduino-connector.dtsi

Comments

Vignesh Raghavendra Feb. 14, 2024, 10:13 a.m. UTC | #1 
On 09/02/24 12:53, Jan Kiszka wrote:
> From: Jan Kiszka <jan.kiszka@siemens.com>
> 
> A new variant is to be added which will not have a arduino connector
> like the existing ones. Factor out all bits that are specific to this
> connector.
> 
> The split is not perfect because wkup_gpio0 is defined based on what is
> common to all variants having the connector, thus containing also
> connector-unrelated information. But this is still cleaner than
> replicating this node into all 4 variants.
> 
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
> ---
>  .../ti/k3-am65-iot2050-arduino-connector.dtsi | 768 ++++++++++++++++++
>  .../boot/dts/ti/k3-am65-iot2050-common.dtsi   | 753 -----------------
>  .../ti/k3-am6528-iot2050-basic-common.dtsi    |   1 +
>  .../dts/ti/k3-am6548-iot2050-advanced-m2.dts  |   1 +
>  .../dts/ti/k3-am6548-iot2050-advanced-pg2.dts |   1 +
>  .../dts/ti/k3-am6548-iot2050-advanced.dts     |   1 +
>  6 files changed, 772 insertions(+), 753 deletions(-)
>  create mode 100644 
> arch/arm64/boot/dts/ti/k3-am65-iot2050-arduino-connector.dtsi
> 
> diff --git 
> a/arch/arm64/boot/dts/ti/k3-am65-iot2050-arduino-connector.dtsi 
> b/arch/arm64/boot/dts/ti/k3-am65-iot2050-arduino-connector.dtsi
> new file mode 100644
> index 000000000000..cd86f412b837
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-arduino-connector.dtsi
> @@ -0,0 +1,768 @@
> +// SPDX-License-Identifier: GPL-2.0

This and elsewhere in the series should be

// SPDX-License-Identifier: GPL-2.0-only

as fixed up by Nishanth in [0]. I can fix that locally, let me know.

[0] https://lore.kernel.org/r/20240122145539.194512-16-nm@ti.com
Jan Kiszka Feb. 14, 2024, 11:21 a.m. UTC | #2 
On 14.02.24 11:13, Vignesh Raghavendra wrote:
> 
> 
> On 09/02/24 12:53, Jan Kiszka wrote:
>> From: Jan Kiszka <jan.kiszka@siemens.com>
>>
>> A new variant is to be added which will not have a arduino connector
>> like the existing ones. Factor out all bits that are specific to this
>> connector.
>>
>> The split is not perfect because wkup_gpio0 is defined based on what is
>> common to all variants having the connector, thus containing also
>> connector-unrelated information. But this is still cleaner than
>> replicating this node into all 4 variants.
>>
>> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
>> ---
>>  .../ti/k3-am65-iot2050-arduino-connector.dtsi | 768 ++++++++++++++++++
>>  .../boot/dts/ti/k3-am65-iot2050-common.dtsi   | 753 -----------------
>>  .../ti/k3-am6528-iot2050-basic-common.dtsi    |   1 +
>>  .../dts/ti/k3-am6548-iot2050-advanced-m2.dts  |   1 +
>>  .../dts/ti/k3-am6548-iot2050-advanced-pg2.dts |   1 +
>>  .../dts/ti/k3-am6548-iot2050-advanced.dts     |   1 +
>>  6 files changed, 772 insertions(+), 753 deletions(-)
>>  create mode 100644 
>> arch/arm64/boot/dts/ti/k3-am65-iot2050-arduino-connector.dtsi
>>
>> diff --git 
>> a/arch/arm64/boot/dts/ti/k3-am65-iot2050-arduino-connector.dtsi 
>> b/arch/arm64/boot/dts/ti/k3-am65-iot2050-arduino-connector.dtsi
>> new file mode 100644
>> index 000000000000..cd86f412b837
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-arduino-connector.dtsi
>> @@ -0,0 +1,768 @@
>> +// SPDX-License-Identifier: GPL-2.0
> 
> This and elsewhere in the series should be
> 
> // SPDX-License-Identifier: GPL-2.0-only
> 
> as fixed up by Nishanth in [0]. I can fix that locally, let me know.
> 

Yes, please.

> [0] https://lore.kernel.org/r/20240122145539.194512-16-nm@ti.com
> 

Thanks,
Jan
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-arduino-connector.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-arduino-connector.dtsi
new file mode 100644
index 000000000000..cd86f412b837
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-arduino-connector.dtsi
@@ -0,0 +1,768 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2023
+ *
+ * Authors:
+ *   Le Jin <le.jin@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * Common bits for IOT2050 variants with Arduino connector
+ */
+
+&wkup_pmx0 {
+	pinctrl-names =
+		"default",
+		"d0-uart0-rxd",  "d0-gpio",  "d0-gpio-pullup",  "d0-gpio-pulldown",
+		"d1-uart0-txd",  "d1-gpio",  "d1-gpio-pullup",  "d1-gpio-pulldown",
+		"d2-uart0-ctsn", "d2-gpio",  "d2-gpio-pullup",  "d2-gpio-pulldown",
+		"d3-uart0-rtsn", "d3-gpio",  "d3-gpio-pullup",  "d3-gpio-pulldown",
+		"d10-spi0-cs0",  "d10-gpio", "d10-gpio-pullup", "d10-gpio-pulldown",
+		"d11-spi0-d0",   "d11-gpio", "d11-gpio-pullup", "d11-gpio-pulldown",
+		"d12-spi0-d1",   "d12-gpio", "d12-gpio-pullup", "d12-gpio-pulldown",
+		"d13-spi0-clk",  "d13-gpio", "d13-gpio-pullup", "d13-gpio-pulldown",
+		"a0-gpio", "a0-gpio-pullup", "a0-gpio-pulldown",
+		"a1-gpio", "a1-gpio-pullup", "a1-gpio-pulldown",
+		"a2-gpio", "a2-gpio-pullup", "a2-gpio-pulldown",
+		"a3-gpio", "a3-gpio-pullup", "a3-gpio-pulldown",
+		"a4-gpio", "a4-gpio-pullup", "a4-gpio-pulldown",
+		"a5-gpio", "a5-gpio-pullup", "a5-gpio-pulldown";
+
+	pinctrl-0 = <&d0_uart0_rxd>;
+	pinctrl-1 = <&d0_uart0_rxd>;
+	pinctrl-2 = <&d0_gpio>;
+	pinctrl-3 = <&d0_gpio_pullup>;
+	pinctrl-4 = <&d0_gpio_pulldown>;
+	pinctrl-5 = <&d1_uart0_txd>;
+	pinctrl-6 = <&d1_gpio>;
+	pinctrl-7 = <&d1_gpio_pullup>;
+	pinctrl-8 = <&d1_gpio_pulldown>;
+	pinctrl-9 = <&d2_uart0_ctsn>;
+	pinctrl-10 = <&d2_gpio>;
+	pinctrl-11 = <&d2_gpio_pullup>;
+	pinctrl-12 = <&d2_gpio_pulldown>;
+	pinctrl-13 = <&d3_uart0_rtsn>;
+	pinctrl-14 = <&d3_gpio>;
+	pinctrl-15 = <&d3_gpio_pullup>;
+	pinctrl-16 = <&d3_gpio_pulldown>;
+	pinctrl-17 = <&d10_spi0_cs0>;
+	pinctrl-18 = <&d10_gpio>;
+	pinctrl-19 = <&d10_gpio_pullup>;
+	pinctrl-20 = <&d10_gpio_pulldown>;
+	pinctrl-21 = <&d11_spi0_d0>;
+	pinctrl-22 = <&d11_gpio>;
+	pinctrl-23 = <&d11_gpio_pullup>;
+	pinctrl-24 = <&d11_gpio_pulldown>;
+	pinctrl-25 = <&d12_spi0_d1>;
+	pinctrl-26 = <&d12_gpio>;
+	pinctrl-27 = <&d12_gpio_pullup>;
+	pinctrl-28 = <&d12_gpio_pulldown>;
+	pinctrl-29 = <&d13_spi0_clk>;
+	pinctrl-30 = <&d13_gpio>;
+	pinctrl-31 = <&d13_gpio_pullup>;
+	pinctrl-32 = <&d13_gpio_pulldown>;
+	pinctrl-33 = <&a0_gpio>;
+	pinctrl-34 = <&a0_gpio_pullup>;
+	pinctrl-35 = <&a0_gpio_pulldown>;
+	pinctrl-36 = <&a1_gpio>;
+	pinctrl-37 = <&a1_gpio_pullup>;
+	pinctrl-38 = <&a1_gpio_pulldown>;
+	pinctrl-39 = <&a2_gpio>;
+	pinctrl-40 = <&a2_gpio_pullup>;
+	pinctrl-41 = <&a2_gpio_pulldown>;
+	pinctrl-42 = <&a3_gpio>;
+	pinctrl-43 = <&a3_gpio_pullup>;
+	pinctrl-44 = <&a3_gpio_pulldown>;
+	pinctrl-45 = <&a4_gpio>;
+	pinctrl-46 = <&a4_gpio_pullup>;
+	pinctrl-47 = <&a4_gpio_pulldown>;
+	pinctrl-48 = <&a5_gpio>;
+	pinctrl-49 = <&a5_gpio_pullup>;
+	pinctrl-50 = <&a5_gpio_pulldown>;
+
+	d0_uart0_rxd: d0-uart0-rxd-pins {
+		pinctrl-single,pins = <
+			/* (P4) MCU_UART0_RXD */
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4)
+		>;
+	};
+
+	d0_gpio: d0-gpio-pins {
+		pinctrl-single,pins = <
+			/* (P4) WKUP_GPIO0_29 */
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 7)
+		>;
+	};
+
+	d0_gpio_pullup: d0-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (P4) WKUP_GPIO0_29 */
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d0_gpio_pulldown: d0-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (P4) WKUP_GPIO0_29 */
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d1_uart0_txd: d1-uart0-txd-pins {
+		pinctrl-single,pins = <
+			/* (P5) MCU_UART0_TXD */
+			AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4)
+		>;
+	};
+
+	d1_gpio: d1-gpio-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_30 */
+			AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7)
+		>;
+	};
+
+	d1_gpio_pullup: d1-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_30 */
+			AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7)
+		>;
+	};
+
+	d1_gpio_pulldown: d1-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_30 */
+			AM65X_WKUP_IOPAD(0x0048, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d2_uart0_ctsn: d2-uart0-ctsn-pins {
+		pinctrl-single,pins = <
+			/* (P1) MCU_UART0_CTSn */
+			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4)
+		>;
+	};
+
+	d2_gpio: d2-gpio-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_31 */
+			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7)
+		>;
+	};
+
+	d2_gpio_pullup: d2-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_31 */
+			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7)
+		>;
+	};
+
+	d2_gpio_pulldown: d2-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_31 */
+			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d3_uart0_rtsn: d3-uart0-rtsn-pins {
+		pinctrl-single,pins = <
+			/* (N3) MCU_UART0_RTSn */
+			AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4)
+		>;
+	};
+
+	d3_gpio: d3-gpio-pins {
+		pinctrl-single,pins = <
+			/* (N3) WKUP_GPIO0_33 */
+			AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7)
+		>;
+	};
+
+	d3_gpio_pullup: d3-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (N3) WKUP_GPIO0_33 */
+			AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7)
+		>;
+	};
+
+	d3_gpio_pulldown: d3-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (N3) WKUP_GPIO0_33 */
+			AM65X_WKUP_IOPAD(0x0054, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d10_spi0_cs0: d10-spi0-cs0-pins {
+		pinctrl-single,pins = <
+			/* (Y4) MCU_SPI0_CS0 */
+			AM65X_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0)
+		>;
+	};
+
+	d10_gpio: d10-gpio-pins {
+		pinctrl-single,pins = <
+			/* (Y4) WKUP_GPIO0_51 */
+			AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7)
+		>;
+	};
+
+	d10_gpio_pullup: d10-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (Y4) WKUP_GPIO0_51 */
+			AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7)
+		>;
+	};
+
+	d10_gpio_pulldown: d10-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (Y4) WKUP_GPIO0_51 */
+			AM65X_WKUP_IOPAD(0x009c, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d11_spi0_d0: d11-spi0-d0-pins {
+		pinctrl-single,pins = <
+			/* (Y3) MCU_SPI0_D0 */
+			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 0)
+		>;
+	};
+
+	d11_gpio: d11-gpio-pins {
+		pinctrl-single,pins = <
+			/* (Y3) WKUP_GPIO0_49 */
+			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7)
+		>;
+	};
+
+	d11_gpio_pullup: d11-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (Y3) WKUP_GPIO0_49 */
+			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7)
+		>;
+	};
+
+	d11_gpio_pulldown: d11-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (Y3) WKUP_GPIO0_49 */
+			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d12_spi0_d1: d12-spi0-d1-pins {
+		pinctrl-single,pins = <
+			/* (Y2) MCU_SPI0_D1 */
+			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 0)
+		>;
+	};
+
+	d12_gpio: d12-gpio-pins {
+		pinctrl-single,pins = <
+			/* (Y2) WKUP_GPIO0_50 */
+			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7)
+		>;
+	};
+
+	d12_gpio_pullup: d12-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (Y2) WKUP_GPIO0_50 */
+			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7)
+		>;
+	};
+
+	d12_gpio_pulldown: d12-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (Y2) WKUP_GPIO0_50 */
+			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d13_spi0_clk: d13-spi0-clk-pins {
+		pinctrl-single,pins = <
+			/* (Y1) MCU_SPI0_CLK */
+			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 0)
+		>;
+	};
+
+	d13_gpio: d13-gpio-pins {
+		pinctrl-single,pins = <
+			/* (Y1) WKUP_GPIO0_48 */
+			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7)
+		>;
+	};
+
+	d13_gpio_pullup: d13-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (Y1) WKUP_GPIO0_48 */
+			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7)
+		>;
+	};
+
+	d13_gpio_pulldown: d13-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (Y1) WKUP_GPIO0_48 */
+			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a0_gpio: a0-gpio-pins {
+		pinctrl-single,pins = <
+			/* (L6) WKUP_GPIO0_45 */
+			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7)
+		>;
+	};
+
+	a0_gpio_pullup: a0-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (L6) WKUP_GPIO0_45 */
+			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7)
+		>;
+	};
+
+	a0_gpio_pulldown: a0-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (L6) WKUP_GPIO0_45 */
+			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a1_gpio: a1-gpio-pins {
+		pinctrl-single,pins = <
+			/* (M6) WKUP_GPIO0_44 */
+			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7)
+		>;
+	};
+
+	a1_gpio_pullup: a1-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (M6) WKUP_GPIO0_44 */
+			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7)
+		>;
+	};
+
+	a1_gpio_pulldown: a1-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (M6) WKUP_GPIO0_44 */
+			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a2_gpio: a2-gpio-pins {
+		pinctrl-single,pins = <
+			/* (L5) WKUP_GPIO0_43 */
+			AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7)
+		>;
+	};
+
+	a2_gpio_pullup: a2-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (L5) WKUP_GPIO0_43 */
+			AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7)
+		>;
+	};
+
+	a2_gpio_pulldown: a2-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (L5) WKUP_GPIO0_43 */
+			AM65X_WKUP_IOPAD(0x007C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a3_gpio: a3-gpio-pins {
+		pinctrl-single,pins = <
+			/* (M5) WKUP_GPIO0_39 */
+			AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7)
+		>;
+	};
+
+	a3_gpio_pullup: a3-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (M5) WKUP_GPIO0_39 */
+			AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7)
+		>;
+	};
+
+	a3_gpio_pulldown: a3-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (M5) WKUP_GPIO0_39 */
+			AM65X_WKUP_IOPAD(0x006C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a4_gpio: a4-gpio-pins {
+		pinctrl-single,pins = <
+			/* (L2) WKUP_GPIO0_42 */
+			AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7)
+		>;
+	};
+
+	a4_gpio_pullup: a4-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (L2) WKUP_GPIO0_42 */
+			AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7)
+		>;
+	};
+
+	a4_gpio_pulldown: a4-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (L2) WKUP_GPIO0_42 */
+			AM65X_WKUP_IOPAD(0x0078, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a5_gpio: a5-gpio-pins {
+		pinctrl-single,pins = <
+			/* (N5) WKUP_GPIO0_35 */
+			AM65X_WKUP_IOPAD(0x005C, PIN_INPUT, 7)
+		>;
+	};
+
+	a5_gpio_pullup: a5-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (N5) WKUP_GPIO0_35 */
+			AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	a5_gpio_pulldown: a5-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (N5) WKUP_GPIO0_35 */
+			AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+		pinctrl-single,pins = <
+			/* (AC7) WKUP_I2C0_SCL */
+			AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT,  0)
+			/* (AD6) WKUP_I2C0_SDA */
+			AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT,  0)
+		>;
+	};
+
+	arduino_i2c_aio_switch_pins_default: arduino-i2c-aio-switch-default-pins {
+		pinctrl-single,pins = <
+			/* (R2) WKUP_GPIO0_21 */
+			AM65X_WKUP_IOPAD(0x0024, PIN_OUTPUT, 7)
+		>;
+	};
+
+	arduino_io_oe_pins_default: arduino-io-oe-default-pins {
+		pinctrl-single,pins = <
+			/* (N4) WKUP_GPIO0_34 */
+			AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 7)
+			/* (M2) WKUP_GPIO0_36 */
+			AM65X_WKUP_IOPAD(0x0060, PIN_OUTPUT, 7)
+			/* (M3) WKUP_GPIO0_37 */
+			AM65X_WKUP_IOPAD(0x0064, PIN_OUTPUT, 7)
+			/* (M4) WKUP_GPIO0_38 */
+			AM65X_WKUP_IOPAD(0x0068, PIN_OUTPUT, 7)
+			/* (M1) WKUP_GPIO0_41 */
+			AM65X_WKUP_IOPAD(0x0074, PIN_OUTPUT, 7)
+		>;
+	};
+};
+
+&main_pmx0 {
+	pinctrl-names =
+		"default",
+		"d4-ehrpwm0-a", "d4-gpio", "d4-gpio-pullup", "d4-gpio-pulldown",
+		"d5-ehrpwm1-a", "d5-gpio", "d5-gpio-pullup", "d5-gpio-pulldown",
+		"d6-ehrpwm2-a", "d6-gpio", "d6-gpio-pullup", "d6-gpio-pulldown",
+		"d7-ehrpwm3-a", "d7-gpio", "d7-gpio-pullup", "d7-gpio-pulldown",
+		"d8-ehrpwm4-a", "d8-gpio", "d8-gpio-pullup", "d8-gpio-pulldown",
+		"d9-ehrpwm5-a", "d9-gpio", "d9-gpio-pullup", "d9-gpio-pulldown";
+
+	pinctrl-0 = <&d4_ehrpwm0_a>;
+	pinctrl-1 = <&d4_ehrpwm0_a>;
+	pinctrl-2 = <&d4_gpio>;
+	pinctrl-3 = <&d4_gpio_pullup>;
+	pinctrl-4 = <&d4_gpio_pulldown>;
+
+	pinctrl-5 = <&d5_ehrpwm1_a>;
+	pinctrl-6 = <&d5_gpio>;
+	pinctrl-7 = <&d5_gpio_pullup>;
+	pinctrl-8 = <&d5_gpio_pulldown>;
+
+	pinctrl-9 = <&d6_ehrpwm2_a>;
+	pinctrl-10 = <&d6_gpio>;
+	pinctrl-11 = <&d6_gpio_pullup>;
+	pinctrl-12 = <&d6_gpio_pulldown>;
+
+	pinctrl-13 = <&d7_ehrpwm3_a>;
+	pinctrl-14 = <&d7_gpio>;
+	pinctrl-15 = <&d7_gpio_pullup>;
+	pinctrl-16 = <&d7_gpio_pulldown>;
+
+	pinctrl-17 = <&d8_ehrpwm4_a>;
+	pinctrl-18 = <&d8_gpio>;
+	pinctrl-19 = <&d8_gpio_pullup>;
+	pinctrl-20 = <&d8_gpio_pulldown>;
+
+	pinctrl-21 = <&d9_ehrpwm5_a>;
+	pinctrl-22 = <&d9_gpio>;
+	pinctrl-23 = <&d9_gpio_pullup>;
+	pinctrl-24 = <&d9_gpio_pulldown>;
+
+	d4_ehrpwm0_a: d4-ehrpwm0-a-pins {
+		pinctrl-single,pins = <
+			/* (AG18) EHRPWM0_A */
+			AM65X_IOPAD(0x0084, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d4_gpio: d4-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AG18) GPIO0_33 */
+			AM65X_IOPAD(0x0084, PIN_INPUT, 7)
+		>;
+	};
+
+	d4_gpio_pullup: d4-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AG18) GPIO0_33 */
+			AM65X_IOPAD(0x0084, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d4_gpio_pulldown: d4-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AG18) GPIO0_33 */
+			AM65X_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d5_ehrpwm1_a: d5-ehrpwm1-a-pins {
+		pinctrl-single,pins = <
+			/* (AF17) EHRPWM1_A */
+			AM65X_IOPAD(0x008C, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d5_gpio: d5-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AF17) GPIO0_35 */
+			AM65X_IOPAD(0x008C, PIN_INPUT, 7)
+		>;
+	};
+
+	d5_gpio_pullup: d5-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AF17) GPIO0_35 */
+			AM65X_IOPAD(0x008C, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d5_gpio_pulldown: d5-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AF17) GPIO0_35 */
+			AM65X_IOPAD(0x008C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d6_ehrpwm2_a: d6-ehrpwm2-a-pins {
+		pinctrl-single,pins = <
+			/* (AH16) EHRPWM2_A */
+			AM65X_IOPAD(0x0098, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d6_gpio: d6-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AH16) GPIO0_38 */
+			AM65X_IOPAD(0x0098, PIN_INPUT, 7)
+		>;
+	};
+
+	d6_gpio_pullup: d6-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AH16) GPIO0_38 */
+			AM65X_IOPAD(0x0098, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d6_gpio_pulldown: d6-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AH16) GPIO0_38 */
+			AM65X_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d7_ehrpwm3_a: d7-ehrpwm3-a-pins {
+		pinctrl-single,pins = <
+			/* (AH15) EHRPWM3_A */
+			AM65X_IOPAD(0x00AC, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d7_gpio: d7-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AH15) GPIO0_43 */
+			AM65X_IOPAD(0x00AC, PIN_INPUT, 7)
+		>;
+	};
+
+	d7_gpio_pullup: d7-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AH15) GPIO0_43 */
+			AM65X_IOPAD(0x00AC, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d7_gpio_pulldown: d7-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AH15) GPIO0_43 */
+			AM65X_IOPAD(0x00AC, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d8_ehrpwm4_a: d8-ehrpwm4-a-pins {
+		pinctrl-single,pins = <
+			/* (AG15) EHRPWM4_A */
+			AM65X_IOPAD(0x00C0, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d8_gpio: d8-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AG15) GPIO0_48 */
+			AM65X_IOPAD(0x00C0, PIN_INPUT, 7)
+		>;
+	};
+
+	d8_gpio_pullup: d8-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AG15) GPIO0_48 */
+			AM65X_IOPAD(0x00C0, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d8_gpio_pulldown: d8-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AG15) GPIO0_48 */
+			AM65X_IOPAD(0x00C0, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d9_ehrpwm5_a: d9-ehrpwm5-a-pins {
+		pinctrl-single,pins = <
+			/* (AD15) EHRPWM5_A */
+			AM65X_IOPAD(0x00CC, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d9_gpio: d9-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AD15) GPIO0_51 */
+			AM65X_IOPAD(0x00CC, PIN_INPUT, 7)
+		>;
+	};
+
+	d9_gpio_pullup: d9-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AD15) GPIO0_51 */
+			AM65X_IOPAD(0x00CC, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d9_gpio_pulldown: d9-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AD15) GPIO0_51 */
+			AM65X_IOPAD(0x00CC, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+};
+
+&main_gpio0 {
+	gpio-line-names =
+		"main_gpio0-base", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "",
+		"", "", "", "IO4", "", "IO5", "", "", "IO6", "",
+		"", "", "", "IO7", "", "", "", "", "IO8", "",
+		"", "IO9";
+};
+
+&wkup_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 =
+		<&arduino_i2c_aio_switch_pins_default>,
+		<&arduino_io_oe_pins_default>,
+		<&push_button_pins_default>,
+		<&db9_com_mode_pins_default>;
+	gpio-line-names =
+		/* 0..9 */
+		"wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0",
+		"UART0-enable", "UART0-terminate", "", "WIFI-disable",
+		/* 10..19 */
+		"", "", "", "", "", "", "", "", "", "",
+		/* 20..29 */
+		"", "A4A5-I2C-mux", "", "", "", "USER-button", "", "", "","IO0",
+		/* 30..39 */
+		"IO1", "IO2", "", "IO3", "IO17-direction", "A5",
+		"IO16-direction", "IO15-direction", "IO14-direction", "A3",
+		/* 40..49 */
+		"", "IO18-direction", "A4", "A2", "A1", "A0", "", "", "IO13",
+		"IO11",
+		/* 50..51 */
+		"IO12", "IO10";
+};
+
+&wkup_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&mcu_i2c0 {
+	/* D4200 */
+	pcal9535_1: gpio@20 {
+		compatible = "nxp,pcal9535";
+		reg = <0x20>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names =
+			"A0-pull", "A1-pull", "A2-pull", "A3-pull", "A4-pull",
+			"A5-pull", "", "",
+			"IO14-enable", "IO15-enable", "IO16-enable",
+			"IO17-enable", "IO18-enable", "IO19-enable";
+	};
+
+	/* D4201 */
+	pcal9535_2: gpio@21 {
+		compatible = "nxp,pcal9535";
+		reg = <0x21>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names =
+			"IO0-direction", "IO1-direction", "IO2-direction",
+			"IO3-direction", "IO4-direction", "IO5-direction",
+			"IO6-direction", "IO7-direction",
+			"IO8-direction", "IO9-direction", "IO10-direction",
+			"IO11-direction", "IO12-direction", "IO13-direction",
+			"IO19-direction";
+	};
+
+	/* D4202 */
+	pcal9535_3: gpio@25 {
+		compatible = "nxp,pcal9535";
+		reg = <0x25>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names =
+			"IO0-pull", "IO1-pull", "IO2-pull", "IO3-pull",
+			"IO4-pull", "IO5-pull", "IO6-pull", "IO7-pull",
+			"IO8-pull", "IO9-pull", "IO10-pull", "IO11-pull",
+			"IO12-pull", "IO13-pull";
+	};
+};
+
+&mcu_uart0 {
+	status = "okay";
+};
+
+&tscadc1 {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index 148fb8880089..3ba81866599e 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -192,434 +192,6 @@  icssg0_emac1: port@1 {
 };
 
 &wkup_pmx0 {
-	pinctrl-names =
-		"default",
-		"d0-uart0-rxd",  "d0-gpio",  "d0-gpio-pullup",  "d0-gpio-pulldown",
-		"d1-uart0-txd",  "d1-gpio",  "d1-gpio-pullup",  "d1-gpio-pulldown",
-		"d2-uart0-ctsn", "d2-gpio",  "d2-gpio-pullup",  "d2-gpio-pulldown",
-		"d3-uart0-rtsn", "d3-gpio",  "d3-gpio-pullup",  "d3-gpio-pulldown",
-		"d10-spi0-cs0",  "d10-gpio", "d10-gpio-pullup", "d10-gpio-pulldown",
-		"d11-spi0-d0",   "d11-gpio", "d11-gpio-pullup", "d11-gpio-pulldown",
-		"d12-spi0-d1",   "d12-gpio", "d12-gpio-pullup", "d12-gpio-pulldown",
-		"d13-spi0-clk",  "d13-gpio", "d13-gpio-pullup", "d13-gpio-pulldown",
-		"a0-gpio", "a0-gpio-pullup", "a0-gpio-pulldown",
-		"a1-gpio", "a1-gpio-pullup", "a1-gpio-pulldown",
-		"a2-gpio", "a2-gpio-pullup", "a2-gpio-pulldown",
-		"a3-gpio", "a3-gpio-pullup", "a3-gpio-pulldown",
-		"a4-gpio", "a4-gpio-pullup", "a4-gpio-pulldown",
-		"a5-gpio", "a5-gpio-pullup", "a5-gpio-pulldown";
-
-	pinctrl-0 = <&d0_uart0_rxd>;
-	pinctrl-1 = <&d0_uart0_rxd>;
-	pinctrl-2 = <&d0_gpio>;
-	pinctrl-3 = <&d0_gpio_pullup>;
-	pinctrl-4 = <&d0_gpio_pulldown>;
-	pinctrl-5 = <&d1_uart0_txd>;
-	pinctrl-6 = <&d1_gpio>;
-	pinctrl-7 = <&d1_gpio_pullup>;
-	pinctrl-8 = <&d1_gpio_pulldown>;
-	pinctrl-9 = <&d2_uart0_ctsn>;
-	pinctrl-10 = <&d2_gpio>;
-	pinctrl-11 = <&d2_gpio_pullup>;
-	pinctrl-12 = <&d2_gpio_pulldown>;
-	pinctrl-13 = <&d3_uart0_rtsn>;
-	pinctrl-14 = <&d3_gpio>;
-	pinctrl-15 = <&d3_gpio_pullup>;
-	pinctrl-16 = <&d3_gpio_pulldown>;
-	pinctrl-17 = <&d10_spi0_cs0>;
-	pinctrl-18 = <&d10_gpio>;
-	pinctrl-19 = <&d10_gpio_pullup>;
-	pinctrl-20 = <&d10_gpio_pulldown>;
-	pinctrl-21 = <&d11_spi0_d0>;
-	pinctrl-22 = <&d11_gpio>;
-	pinctrl-23 = <&d11_gpio_pullup>;
-	pinctrl-24 = <&d11_gpio_pulldown>;
-	pinctrl-25 = <&d12_spi0_d1>;
-	pinctrl-26 = <&d12_gpio>;
-	pinctrl-27 = <&d12_gpio_pullup>;
-	pinctrl-28 = <&d12_gpio_pulldown>;
-	pinctrl-29 = <&d13_spi0_clk>;
-	pinctrl-30 = <&d13_gpio>;
-	pinctrl-31 = <&d13_gpio_pullup>;
-	pinctrl-32 = <&d13_gpio_pulldown>;
-	pinctrl-33 = <&a0_gpio>;
-	pinctrl-34 = <&a0_gpio_pullup>;
-	pinctrl-35 = <&a0_gpio_pulldown>;
-	pinctrl-36 = <&a1_gpio>;
-	pinctrl-37 = <&a1_gpio_pullup>;
-	pinctrl-38 = <&a1_gpio_pulldown>;
-	pinctrl-39 = <&a2_gpio>;
-	pinctrl-40 = <&a2_gpio_pullup>;
-	pinctrl-41 = <&a2_gpio_pulldown>;
-	pinctrl-42 = <&a3_gpio>;
-	pinctrl-43 = <&a3_gpio_pullup>;
-	pinctrl-44 = <&a3_gpio_pulldown>;
-	pinctrl-45 = <&a4_gpio>;
-	pinctrl-46 = <&a4_gpio_pullup>;
-	pinctrl-47 = <&a4_gpio_pulldown>;
-	pinctrl-48 = <&a5_gpio>;
-	pinctrl-49 = <&a5_gpio_pullup>;
-	pinctrl-50 = <&a5_gpio_pulldown>;
-
-	d0_uart0_rxd: d0-uart0-rxd-pins {
-		pinctrl-single,pins = <
-			/* (P4) MCU_UART0_RXD */
-			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4)
-		>;
-	};
-
-	d0_gpio: d0-gpio-pins {
-		pinctrl-single,pins = <
-			/* (P4) WKUP_GPIO0_29 */
-			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 7)
-		>;
-	};
-
-	d0_gpio_pullup: d0-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (P4) WKUP_GPIO0_29 */
-			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLUP, 7)
-		>;
-	};
-
-	d0_gpio_pulldown: d0-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (P4) WKUP_GPIO0_29 */
-			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	d1_uart0_txd: d1-uart0-txd-pins {
-		pinctrl-single,pins = <
-			/* (P5) MCU_UART0_TXD */
-			AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4)
-		>;
-	};
-
-	d1_gpio: d1-gpio-pins {
-		pinctrl-single,pins = <
-			/* (P5) WKUP_GPIO0_30 */
-			AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7)
-		>;
-	};
-
-	d1_gpio_pullup: d1-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (P5) WKUP_GPIO0_30 */
-			AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7)
-		>;
-	};
-
-	d1_gpio_pulldown: d1-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (P5) WKUP_GPIO0_30 */
-			AM65X_WKUP_IOPAD(0x0048, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	d2_uart0_ctsn: d2-uart0-ctsn-pins {
-		pinctrl-single,pins = <
-			/* (P1) MCU_UART0_CTSn */
-			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4)
-		>;
-	};
-
-	d2_gpio: d2-gpio-pins {
-		pinctrl-single,pins = <
-			/* (P5) WKUP_GPIO0_31 */
-			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7)
-		>;
-	};
-
-	d2_gpio_pullup: d2-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (P5) WKUP_GPIO0_31 */
-			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7)
-		>;
-	};
-
-	d2_gpio_pulldown: d2-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (P5) WKUP_GPIO0_31 */
-			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	d3_uart0_rtsn: d3-uart0-rtsn-pins {
-		pinctrl-single,pins = <
-			/* (N3) MCU_UART0_RTSn */
-			AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4)
-		>;
-	};
-
-	d3_gpio: d3-gpio-pins {
-		pinctrl-single,pins = <
-			/* (N3) WKUP_GPIO0_33 */
-			AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7)
-		>;
-	};
-
-	d3_gpio_pullup: d3-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (N3) WKUP_GPIO0_33 */
-			AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7)
-		>;
-	};
-
-	d3_gpio_pulldown: d3-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (N3) WKUP_GPIO0_33 */
-			AM65X_WKUP_IOPAD(0x0054, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	d10_spi0_cs0: d10-spi0-cs0-pins {
-		pinctrl-single,pins = <
-			/* (Y4) MCU_SPI0_CS0 */
-			AM65X_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0)
-		>;
-	};
-
-	d10_gpio: d10-gpio-pins {
-		pinctrl-single,pins = <
-			/* (Y4) WKUP_GPIO0_51 */
-			AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7)
-		>;
-	};
-
-	d10_gpio_pullup: d10-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (Y4) WKUP_GPIO0_51 */
-			AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7)
-		>;
-	};
-
-	d10_gpio_pulldown: d10-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (Y4) WKUP_GPIO0_51 */
-			AM65X_WKUP_IOPAD(0x009c, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	d11_spi0_d0: d11-spi0-d0-pins {
-		pinctrl-single,pins = <
-			/* (Y3) MCU_SPI0_D0 */
-			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 0)
-		>;
-	};
-
-	d11_gpio: d11-gpio-pins {
-		pinctrl-single,pins = <
-			/* (Y3) WKUP_GPIO0_49 */
-			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7)
-		>;
-	};
-
-	d11_gpio_pullup: d11-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (Y3) WKUP_GPIO0_49 */
-			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7)
-		>;
-	};
-
-	d11_gpio_pulldown: d11-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (Y3) WKUP_GPIO0_49 */
-			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	d12_spi0_d1: d12-spi0-d1-pins {
-		pinctrl-single,pins = <
-			/* (Y2) MCU_SPI0_D1 */
-			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 0)
-		>;
-	};
-
-	d12_gpio: d12-gpio-pins {
-		pinctrl-single,pins = <
-			/* (Y2) WKUP_GPIO0_50 */
-			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7)
-		>;
-	};
-
-	d12_gpio_pullup: d12-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (Y2) WKUP_GPIO0_50 */
-			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7)
-		>;
-	};
-
-	d12_gpio_pulldown: d12-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (Y2) WKUP_GPIO0_50 */
-			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	d13_spi0_clk: d13-spi0-clk-pins {
-		pinctrl-single,pins = <
-			/* (Y1) MCU_SPI0_CLK */
-			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 0)
-		>;
-	};
-
-	d13_gpio: d13-gpio-pins {
-		pinctrl-single,pins = <
-			/* (Y1) WKUP_GPIO0_48 */
-			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7)
-		>;
-	};
-
-	d13_gpio_pullup: d13-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (Y1) WKUP_GPIO0_48 */
-			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7)
-		>;
-	};
-
-	d13_gpio_pulldown: d13-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (Y1) WKUP_GPIO0_48 */
-			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	a0_gpio: a0-gpio-pins {
-		pinctrl-single,pins = <
-			/* (L6) WKUP_GPIO0_45 */
-			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7)
-		>;
-	};
-
-	a0_gpio_pullup: a0-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (L6) WKUP_GPIO0_45 */
-			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7)
-		>;
-	};
-
-	a0_gpio_pulldown: a0-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (L6) WKUP_GPIO0_45 */
-			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	a1_gpio: a1-gpio-pins {
-		pinctrl-single,pins = <
-			/* (M6) WKUP_GPIO0_44 */
-			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7)
-		>;
-	};
-
-	a1_gpio_pullup: a1-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (M6) WKUP_GPIO0_44 */
-			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7)
-		>;
-	};
-
-	a1_gpio_pulldown: a1-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (M6) WKUP_GPIO0_44 */
-			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	a2_gpio: a2-gpio-pins {
-		pinctrl-single,pins = <
-			/* (L5) WKUP_GPIO0_43 */
-			AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7)
-		>;
-	};
-
-	a2_gpio_pullup: a2-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (L5) WKUP_GPIO0_43 */
-			AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7)
-		>;
-	};
-
-	a2_gpio_pulldown: a2-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (L5) WKUP_GPIO0_43 */
-			AM65X_WKUP_IOPAD(0x007C, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	a3_gpio: a3-gpio-pins {
-		pinctrl-single,pins = <
-			/* (M5) WKUP_GPIO0_39 */
-			AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7)
-		>;
-	};
-
-	a3_gpio_pullup: a3-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (M5) WKUP_GPIO0_39 */
-			AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7)
-		>;
-	};
-
-	a3_gpio_pulldown: a3-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (M5) WKUP_GPIO0_39 */
-			AM65X_WKUP_IOPAD(0x006C, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	a4_gpio: a4-gpio-pins {
-		pinctrl-single,pins = <
-			/* (L2) WKUP_GPIO0_42 */
-			AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7)
-		>;
-	};
-
-	a4_gpio_pullup: a4-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (L2) WKUP_GPIO0_42 */
-			AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7)
-		>;
-	};
-
-	a4_gpio_pulldown: a4-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (L2) WKUP_GPIO0_42 */
-			AM65X_WKUP_IOPAD(0x0078, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	a5_gpio: a5-gpio-pins {
-		pinctrl-single,pins = <
-			/* (N5) WKUP_GPIO0_35 */
-			AM65X_WKUP_IOPAD(0x005C, PIN_INPUT, 7)
-		>;
-	};
-
-	a5_gpio_pullup: a5-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (N5) WKUP_GPIO0_35 */
-			AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLUP, 7)
-		>;
-	};
-
-	a5_gpio_pulldown: a5-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (N5) WKUP_GPIO0_35 */
-			AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
-		pinctrl-single,pins = <
-			/* (AC7) WKUP_I2C0_SCL */
-			AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT,  0)
-			/* (AD6) WKUP_I2C0_SDA */
-			AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT,  0)
-		>;
-	};
-
 	mcu_i2c0_pins_default: mcu-i2c0-default-pins {
 		pinctrl-single,pins = <
 			/* (AD8) MCU_I2C0_SCL */
@@ -629,13 +201,6 @@  AM65X_WKUP_IOPAD(0x00ec, PIN_INPUT,  0)
 		>;
 	};
 
-	arduino_i2c_aio_switch_pins_default: arduino-i2c-aio-switch-default-pins {
-		pinctrl-single,pins = <
-			/* (R2) WKUP_GPIO0_21 */
-			AM65X_WKUP_IOPAD(0x0024, PIN_OUTPUT, 7)
-		>;
-	};
-
 	push_button_pins_default: push-button-default-pins {
 		pinctrl-single,pins = <
 			/* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */
@@ -643,22 +208,6 @@  AM65X_WKUP_IOPAD(0x0034, PIN_INPUT,  7)
 		>;
 	};
 
-
-	arduino_io_oe_pins_default: arduino-io-oe-default-pins {
-		pinctrl-single,pins = <
-			/* (N4) WKUP_GPIO0_34 */
-			AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 7)
-			/* (M2) WKUP_GPIO0_36 */
-			AM65X_WKUP_IOPAD(0x0060, PIN_OUTPUT, 7)
-			/* (M3) WKUP_GPIO0_37 */
-			AM65X_WKUP_IOPAD(0x0064, PIN_OUTPUT, 7)
-			/* (M4) WKUP_GPIO0_38 */
-			AM65X_WKUP_IOPAD(0x0068, PIN_OUTPUT, 7)
-			/* (M1) WKUP_GPIO0_41 */
-			AM65X_WKUP_IOPAD(0x0074, PIN_OUTPUT, 7)
-		>;
-	};
-
 	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
 		pinctrl-single,pins = <
 			/* (V1) MCU_OSPI0_CLK */
@@ -722,214 +271,6 @@  AM65X_WKUP_IOPAD(0x003C, PIN_OUTPUT, 7)
 };
 
 &main_pmx0 {
-	pinctrl-names =
-		"default",
-		"d4-ehrpwm0-a", "d4-gpio", "d4-gpio-pullup", "d4-gpio-pulldown",
-		"d5-ehrpwm1-a", "d5-gpio", "d5-gpio-pullup", "d5-gpio-pulldown",
-		"d6-ehrpwm2-a", "d6-gpio", "d6-gpio-pullup", "d6-gpio-pulldown",
-		"d7-ehrpwm3-a", "d7-gpio", "d7-gpio-pullup", "d7-gpio-pulldown",
-		"d8-ehrpwm4-a", "d8-gpio", "d8-gpio-pullup", "d8-gpio-pulldown",
-		"d9-ehrpwm5-a", "d9-gpio", "d9-gpio-pullup", "d9-gpio-pulldown";
-
-	pinctrl-0 = <&d4_ehrpwm0_a>;
-	pinctrl-1 = <&d4_ehrpwm0_a>;
-	pinctrl-2 = <&d4_gpio>;
-	pinctrl-3 = <&d4_gpio_pullup>;
-	pinctrl-4 = <&d4_gpio_pulldown>;
-
-	pinctrl-5 = <&d5_ehrpwm1_a>;
-	pinctrl-6 = <&d5_gpio>;
-	pinctrl-7 = <&d5_gpio_pullup>;
-	pinctrl-8 = <&d5_gpio_pulldown>;
-
-	pinctrl-9 = <&d6_ehrpwm2_a>;
-	pinctrl-10 = <&d6_gpio>;
-	pinctrl-11 = <&d6_gpio_pullup>;
-	pinctrl-12 = <&d6_gpio_pulldown>;
-
-	pinctrl-13 = <&d7_ehrpwm3_a>;
-	pinctrl-14 = <&d7_gpio>;
-	pinctrl-15 = <&d7_gpio_pullup>;
-	pinctrl-16 = <&d7_gpio_pulldown>;
-
-	pinctrl-17 = <&d8_ehrpwm4_a>;
-	pinctrl-18 = <&d8_gpio>;
-	pinctrl-19 = <&d8_gpio_pullup>;
-	pinctrl-20 = <&d8_gpio_pulldown>;
-
-	pinctrl-21 = <&d9_ehrpwm5_a>;
-	pinctrl-22 = <&d9_gpio>;
-	pinctrl-23 = <&d9_gpio_pullup>;
-	pinctrl-24 = <&d9_gpio_pulldown>;
-
-	d4_ehrpwm0_a: d4-ehrpwm0-a-pins {
-		pinctrl-single,pins = <
-			/* (AG18) EHRPWM0_A */
-			AM65X_IOPAD(0x0084, PIN_OUTPUT, 5)
-		>;
-	};
-
-	d4_gpio: d4-gpio-pins {
-		pinctrl-single,pins = <
-			/* (AG18) GPIO0_33 */
-			AM65X_IOPAD(0x0084, PIN_INPUT, 7)
-		>;
-	};
-
-	d4_gpio_pullup: d4-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (AG18) GPIO0_33 */
-			AM65X_IOPAD(0x0084, PIN_INPUT_PULLUP, 7)
-		>;
-	};
-
-	d4_gpio_pulldown: d4-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (AG18) GPIO0_33 */
-			AM65X_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	d5_ehrpwm1_a: d5-ehrpwm1-a-pins {
-		pinctrl-single,pins = <
-			/* (AF17) EHRPWM1_A */
-			AM65X_IOPAD(0x008C, PIN_OUTPUT, 5)
-		>;
-	};
-
-	d5_gpio: d5-gpio-pins {
-		pinctrl-single,pins = <
-			/* (AF17) GPIO0_35 */
-			AM65X_IOPAD(0x008C, PIN_INPUT, 7)
-		>;
-	};
-
-	d5_gpio_pullup: d5-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (AF17) GPIO0_35 */
-			AM65X_IOPAD(0x008C, PIN_INPUT_PULLUP, 7)
-		>;
-	};
-
-	d5_gpio_pulldown: d5-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (AF17) GPIO0_35 */
-			AM65X_IOPAD(0x008C, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	d6_ehrpwm2_a: d6-ehrpwm2-a-pins {
-		pinctrl-single,pins = <
-			/* (AH16) EHRPWM2_A */
-			AM65X_IOPAD(0x0098, PIN_OUTPUT, 5)
-		>;
-	};
-
-	d6_gpio: d6-gpio-pins {
-		pinctrl-single,pins = <
-			/* (AH16) GPIO0_38 */
-			AM65X_IOPAD(0x0098, PIN_INPUT, 7)
-		>;
-	};
-
-	d6_gpio_pullup: d6-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (AH16) GPIO0_38 */
-			AM65X_IOPAD(0x0098, PIN_INPUT_PULLUP, 7)
-		>;
-	};
-
-	d6_gpio_pulldown: d6-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (AH16) GPIO0_38 */
-			AM65X_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	d7_ehrpwm3_a: d7-ehrpwm3-a-pins {
-		pinctrl-single,pins = <
-			/* (AH15) EHRPWM3_A */
-			AM65X_IOPAD(0x00AC, PIN_OUTPUT, 5)
-		>;
-	};
-
-	d7_gpio: d7-gpio-pins {
-		pinctrl-single,pins = <
-			/* (AH15) GPIO0_43 */
-			AM65X_IOPAD(0x00AC, PIN_INPUT, 7)
-		>;
-	};
-
-	d7_gpio_pullup: d7-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (AH15) GPIO0_43 */
-			AM65X_IOPAD(0x00AC, PIN_INPUT_PULLUP, 7)
-		>;
-	};
-
-	d7_gpio_pulldown: d7-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (AH15) GPIO0_43 */
-			AM65X_IOPAD(0x00AC, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	d8_ehrpwm4_a: d8-ehrpwm4-a-pins {
-		pinctrl-single,pins = <
-			/* (AG15) EHRPWM4_A */
-			AM65X_IOPAD(0x00C0, PIN_OUTPUT, 5)
-		>;
-	};
-
-	d8_gpio: d8-gpio-pins {
-		pinctrl-single,pins = <
-			/* (AG15) GPIO0_48 */
-			AM65X_IOPAD(0x00C0, PIN_INPUT, 7)
-		>;
-	};
-
-	d8_gpio_pullup: d8-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (AG15) GPIO0_48 */
-			AM65X_IOPAD(0x00C0, PIN_INPUT_PULLUP, 7)
-		>;
-	};
-
-	d8_gpio_pulldown: d8-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (AG15) GPIO0_48 */
-			AM65X_IOPAD(0x00C0, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	d9_ehrpwm5_a: d9-ehrpwm5-a-pins {
-		pinctrl-single,pins = <
-			/* (AD15) EHRPWM5_A */
-			AM65X_IOPAD(0x00CC, PIN_OUTPUT, 5)
-		>;
-	};
-
-	d9_gpio: d9-gpio-pins {
-		pinctrl-single,pins = <
-			/* (AD15) GPIO0_51 */
-			AM65X_IOPAD(0x00CC, PIN_INPUT, 7)
-		>;
-	};
-
-	d9_gpio_pullup: d9-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (AD15) GPIO0_51 */
-			AM65X_IOPAD(0x00CC, PIN_INPUT_PULLUP, 7)
-		>;
-	};
-
-	d9_gpio_pulldown: d9-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (AD15) GPIO0_51 */
-			AM65X_IOPAD(0x00CC, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
 	main_pcie_enable_pins_default: main-pcie-enable-default-pins {
 		pinctrl-single,pins = <
 			AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7)  /* (AH13) GPIO1_17 */
@@ -1088,57 +429,11 @@  &main_uart1 {
 	pinctrl-0 = <&main_uart1_pins_default>;
 };
 
-&mcu_uart0 {
-	status = "okay";
-};
-
-&main_gpio0 {
-	gpio-line-names =
-		"main_gpio0-base", "", "", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "", "", "",
-		"", "", "", "IO4", "", "IO5", "", "", "IO6", "",
-		"", "", "", "IO7", "", "", "", "", "IO8", "",
-		"", "IO9";
-};
-
 &main_gpio1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_pcie_enable_pins_default>;
 };
 
-&wkup_gpio0 {
-	pinctrl-names = "default";
-	pinctrl-0 =
-		<&arduino_i2c_aio_switch_pins_default>,
-		<&arduino_io_oe_pins_default>,
-		<&push_button_pins_default>,
-		<&db9_com_mode_pins_default>;
-	gpio-line-names =
-		/* 0..9 */
-		"wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0",
-		"UART0-enable", "UART0-terminate", "", "WIFI-disable",
-		/* 10..19 */
-		"", "", "", "", "", "", "", "", "", "",
-		/* 20..29 */
-		"", "A4A5-I2C-mux", "", "", "", "USER-button", "", "", "","IO0",
-		/* 30..39 */
-		"IO1", "IO2", "", "IO3", "IO17-direction", "A5",
-		"IO16-direction", "IO15-direction", "IO14-direction", "A3",
-		/* 40..49 */
-		"", "IO18-direction", "A4", "A2", "A1", "A0", "", "", "IO13",
-		"IO11",
-		/* 50..51 */
-		"IO12", "IO10";
-};
-
-&wkup_i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&wkup_i2c0_pins_default>;
-	clock-frequency = <400000>;
-};
-
 &mcu_i2c0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -1156,47 +451,6 @@  psu: regulator@60 {
 		ti,vsel1-state-high;
 		ti,enable-vout-discharge;
 	};
-
-	/* D4200 */
-	pcal9535_1: gpio@20 {
-		compatible = "nxp,pcal9535";
-		reg = <0x20>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-line-names =
-			"A0-pull", "A1-pull", "A2-pull", "A3-pull", "A4-pull",
-			"A5-pull", "", "",
-			"IO14-enable", "IO15-enable", "IO16-enable",
-			"IO17-enable", "IO18-enable", "IO19-enable";
-	};
-
-	/* D4201 */
-	pcal9535_2: gpio@21 {
-		compatible = "nxp,pcal9535";
-		reg = <0x21>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-line-names =
-			"IO0-direction", "IO1-direction", "IO2-direction",
-			"IO3-direction", "IO4-direction", "IO5-direction",
-			"IO6-direction", "IO7-direction",
-			"IO8-direction", "IO9-direction", "IO10-direction",
-			"IO11-direction", "IO12-direction", "IO13-direction",
-			"IO19-direction";
-	};
-
-	/* D4202 */
-	pcal9535_3: gpio@25 {
-		compatible = "nxp,pcal9535";
-		reg = <0x25>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-line-names =
-			"IO0-pull", "IO1-pull", "IO2-pull", "IO3-pull",
-			"IO4-pull", "IO5-pull", "IO6-pull", "IO7-pull",
-			"IO8-pull", "IO9-pull", "IO10-pull", "IO11-pull",
-			"IO12-pull", "IO13-pull";
-	};
 };
 
 &main_i2c0 {
@@ -1298,13 +552,6 @@  &mcu_spi0 {
 	ti,pindir-d0-out-d1-in;
 };
 
-&tscadc1 {
-	status = "okay";
-	adc {
-		ti,adc-channels = <0 1 2 3 4 5>;
-	};
-};
-
 &ospi0 {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
index 3bb6bcb0a5d3..da0a34425c4d 100644
--- a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
@@ -11,6 +11,7 @@ 
 
 #include "k3-am652.dtsi"
 #include "k3-am65-iot2050-common.dtsi"
+#include "k3-am65-iot2050-arduino-connector.dtsi"
 
 / {
 	memory@80000000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
index 1e5d4d98b69b..2401cbe2b66c 100644
--- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
@@ -15,6 +15,7 @@ 
 
 #include "k3-am6548-iot2050-advanced-common.dtsi"
 #include "k3-am65-iot2050-common-pg2.dtsi"
+#include "k3-am65-iot2050-arduino-connector.dtsi"
 
 / {
 	compatible = "siemens,iot2050-advanced-m2", "ti,am654";
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts
index a8ce8c891894..c1205feef54e 100644
--- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts
@@ -17,6 +17,7 @@ 
 
 #include "k3-am6548-iot2050-advanced-common.dtsi"
 #include "k3-am65-iot2050-common-pg2.dtsi"
+#include "k3-am65-iot2050-arduino-connector.dtsi"
 
 / {
 	compatible = "siemens,iot2050-advanced-pg2", "ti,am654";
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts
index 077f165bdc68..b66965f992b9 100644
--- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts
@@ -17,6 +17,7 @@ 
 
 #include "k3-am6548-iot2050-advanced-common.dtsi"
 #include "k3-am65-iot2050-common-pg1.dtsi"
+#include "k3-am65-iot2050-arduino-connector.dtsi"
 
 / {
 	compatible = "siemens,iot2050-advanced", "ti,am654";