[v1,1/3] dt-bindings: iio: light: ROHM BU27008

Message ID 30daff0d94cd4d05de0194808ab9a6984caf78dc.1682067567.git.mazziesaccount@gmail.com
State New
Headers
Series Support ROHM BU27008 RGB sensor |

Commit Message

Matti Vaittinen April 21, 2023, 9:38 a.m. UTC
  The ROHM BU27008 is a sensor with 5 photodiodes (red, green, blue, clear
and IR) with four configurable channels. Red and green being always
available and two out of the rest three (blue, clear, IR) can be
selected to be simultaneously measured. Typical application is adjusting
LCD backlight of TVs, mobile phones and tablet PCs.

Add BU27008 dt-bindings.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
---
 .../bindings/iio/light/rohm-bu27008.yaml      | 49 +++++++++++++++++++
 1 file changed, 49 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/light/rohm-bu27008.yaml
  

Comments

Krzysztof Kozlowski April 24, 2023, 10:12 a.m. UTC | #1
On 21/04/2023 11:38, Matti Vaittinen wrote:
> The ROHM BU27008 is a sensor with 5 photodiodes (red, green, blue, clear
> and IR) with four configurable channels. Red and green being always
> available and two out of the rest three (blue, clear, IR) can be
> selected to be simultaneously measured. Typical application is adjusting
> LCD backlight of TVs, mobile phones and tablet PCs.
> 
> Add BU27008 dt-bindings.
> 
> Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
> ---
>  .../bindings/iio/light/rohm-bu27008.yaml      | 49 +++++++++++++++++++
>  1 file changed, 49 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/light/rohm-bu27008.yaml

Filename like compatible, so rohm,bu27008.yaml

> 
> diff --git a/Documentation/devicetree/bindings/iio/light/rohm-bu27008.yaml b/Documentation/devicetree/bindings/iio/light/rohm-bu27008.yaml
> new file mode 100644
> index 000000000000..d942c2817680
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/light/rohm-bu27008.yaml
> @@ -0,0 +1,49 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/light/bu27008.yaml#

Does not look like you tested the bindings. Please run `make
dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).


> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ROHM BU27008 color sensor
> +
> +maintainers:
> +  - Matti Vaittinen <mazziesaccount@gmail.com>
> +
> +description: |

Do not need '|' unless you need to preserve formatting.

> +  The ROHM BU27008 is a sensor with 5 photodiodes (red, green, blue, clear
> +  and IR) with four configurable channels. Red and green being always
> +  available and two out of the rest three (blue, clear, IR) can be
> +  selected to be simultaneously measured. Typical application is adjusting
> +  LCD backlight of TVs, mobile phones and tablet PCs.


Best regards,
Krzysztof
  
Matti Vaittinen April 24, 2023, 10:26 a.m. UTC | #2
On 4/24/23 13:12, Krzysztof Kozlowski wrote:
> On 21/04/2023 11:38, Matti Vaittinen wrote:
>> The ROHM BU27008 is a sensor with 5 photodiodes (red, green, blue, clear
>> and IR) with four configurable channels. Red and green being always
>> available and two out of the rest three (blue, clear, IR) can be
>> selected to be simultaneously measured. Typical application is adjusting
>> LCD backlight of TVs, mobile phones and tablet PCs.
>>
>> Add BU27008 dt-bindings.
>>
>> Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
>> ---
>>   .../bindings/iio/light/rohm-bu27008.yaml      | 49 +++++++++++++++++++
>>   1 file changed, 49 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/iio/light/rohm-bu27008.yaml
> 
> Filename like compatible, so rohm,bu27008.yaml

Thanks Krzysztof. I should've remembered this as you told me the same 
thing during the bu27034 review. Feel free to kick me atthe ELC-E if I 
do the same mistake with bu27010 as well ^^;
> 
>>
>> diff --git a/Documentation/devicetree/bindings/iio/light/rohm-bu27008.yaml b/Documentation/devicetree/bindings/iio/light/rohm-bu27008.yaml
>> new file mode 100644
>> index 000000000000..d942c2817680
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/light/rohm-bu27008.yaml
>> @@ -0,0 +1,49 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/iio/light/bu27008.yaml#
> 
> Does not look like you tested the bindings. Please run `make
> dt_binding_check` (see
> Documentation/devicetree/bindings/writing-schema.rst for instructions).
> 

I actually did. But I did first run the dt_binding_check without 
filename - causing it to check all the in-tree bindings - which took a 
while. So, I went to have a lunch. When I came back I re-ran the check 
with the filename (DT_SCHEMA_FILES=...) - which gave me no errors.

I _assume_ this is because running the check for all bindings had 
already done <add step here> generating the warning, while re-running 
the check with the filename omitted the <add step here> and no longer 
displayed the warning.

In any case, I missed warning from full-check, and checker missed the 
warning when re-ran.

> 
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: ROHM BU27008 color sensor
>> +
>> +maintainers:
>> +  - Matti Vaittinen <mazziesaccount@gmail.com>
>> +
>> +description: |
> 
> Do not need '|' unless you need to preserve formatting.

Ok, thanks.

I'll fix these for v2 :)

Yours,
	-- Matti
  

Patch

diff --git a/Documentation/devicetree/bindings/iio/light/rohm-bu27008.yaml b/Documentation/devicetree/bindings/iio/light/rohm-bu27008.yaml
new file mode 100644
index 000000000000..d942c2817680
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/rohm-bu27008.yaml
@@ -0,0 +1,49 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/bu27008.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BU27008 color sensor
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  The ROHM BU27008 is a sensor with 5 photodiodes (red, green, blue, clear
+  and IR) with four configurable channels. Red and green being always
+  available and two out of the rest three (blue, clear, IR) can be
+  selected to be simultaneously measured. Typical application is adjusting
+  LCD backlight of TVs, mobile phones and tablet PCs.
+
+properties:
+  compatible:
+    const: rohm,bu27008
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      light-sensor@38 {
+        compatible = "rohm,bu27008";
+        reg = <0x38>;
+      };
+    };
+
+...