[1/4] selftests/nolibc: add a test-report target

Message ID 291c5437db94057a3b045a6f036b02658380b05b.1685936428.git.falcon@tinylab.org
State New
Headers
Series selftests/nolibc: fix up and improve test report |

Commit Message

Zhangjin Wu June 5, 2023, 3:48 a.m. UTC
  A standalone test-report target is added to let the run, run-user and
rerun targets share them.

Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
---
 tools/testing/selftests/nolibc/Makefile | 26 ++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)
  

Comments

Willy Tarreau June 5, 2023, 4:18 a.m. UTC | #1
On Mon, Jun 05, 2023 at 11:48:52AM +0800, Zhangjin Wu wrote:
> A standalone test-report target is added to let the run, run-user and
> rerun targets share them.
> 
> Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
> ---
>  tools/testing/selftests/nolibc/Makefile | 26 ++++++++++++-------------
>  1 file changed, 13 insertions(+), 13 deletions(-)
> 
> diff --git a/tools/testing/selftests/nolibc/Makefile b/tools/testing/selftests/nolibc/Makefile
> index be4159837494..8149ace2938a 100644
> --- a/tools/testing/selftests/nolibc/Makefile
> +++ b/tools/testing/selftests/nolibc/Makefile
> @@ -127,14 +127,18 @@ nolibc-test: nolibc-test.c sysroot/$(ARCH)/include
>  libc-test: nolibc-test.c
>  	$(QUIET_CC)$(CC) -o $@ $<
>  
> -# qemu user-land test
> -run-user: nolibc-test
> -	$(Q)qemu-$(QEMU_ARCH) ./nolibc-test > "$(CURDIR)/run.out" || :
> +test-report:
>  	$(Q)awk '/\[OK\]$$/{p++} /\[FAIL\]$$/{f++} /\[SKIPPED\]$$/{s++} \
>  	         END{ printf("%d test(s) passed, %d skipped, %d failed.", p, s, f); \
>  	         if (s+f > 0) printf(" See all results in %s\n", ARGV[1]); else print; }' \
>  	         $(CURDIR)/run.out
>  
> +# qemu user-land test
> +_run-user: nolibc-test
> +	$(Q)qemu-$(QEMU_ARCH) ./nolibc-test > "$(CURDIR)/run.out" || :
> +
> +run-user: _run-user test-report
> +

This will not reliably work, there's no ordering here, nothing guarantees
that test-report will run *after* _run-user (e.g. make -j). Another
approach is needed if you want to factor this, but in general creating
sequences in makefiles is difficult and often more painful than having
3 times the same 3 lines.

Willy
  
Zhangjin Wu June 5, 2023, 6:54 a.m. UTC | #2
> On Mon, Jun 05, 2023 at 11:48:52AM +0800, Zhangjin Wu wrote:
> > A standalone test-report target is added to let the run, run-user and
> > rerun targets share them.
> > 
> > Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
> > ---
> >  tools/testing/selftests/nolibc/Makefile | 26 ++++++++++++-------------
> >  1 file changed, 13 insertions(+), 13 deletions(-)
> > 
> > diff --git a/tools/testing/selftests/nolibc/Makefile b/tools/testing/selftests/nolibc/Makefile
> > index be4159837494..8149ace2938a 100644
> > --- a/tools/testing/selftests/nolibc/Makefile
> > +++ b/tools/testing/selftests/nolibc/Makefile
> > @@ -127,14 +127,18 @@ nolibc-test: nolibc-test.c sysroot/$(ARCH)/include
> >  libc-test: nolibc-test.c
> >  	$(QUIET_CC)$(CC) -o $@ $<
> >  
> > -# qemu user-land test
> > -run-user: nolibc-test
> > -	$(Q)qemu-$(QEMU_ARCH) ./nolibc-test > "$(CURDIR)/run.out" || :
> > +test-report:
> >  	$(Q)awk '/\[OK\]$$/{p++} /\[FAIL\]$$/{f++} /\[SKIPPED\]$$/{s++} \
> >  	         END{ printf("%d test(s) passed, %d skipped, %d failed.", p, s, f); \
> >  	         if (s+f > 0) printf(" See all results in %s\n", ARGV[1]); else print; }' \
> >  	         $(CURDIR)/run.out
> >  
> > +# qemu user-land test
> > +_run-user: nolibc-test
> > +	$(Q)qemu-$(QEMU_ARCH) ./nolibc-test > "$(CURDIR)/run.out" || :
> > +
> > +run-user: _run-user test-report
> > +
> 
> This will not reliably work, there's no ordering here, nothing guarantees
> that test-report will run *after* _run-user (e.g. make -j). Another
> approach is needed if you want to factor this, but in general creating
> sequences in makefiles is difficult and often more painful than having
> 3 times the same 3 lines.
>

Ok, thanks, what about this?

    # LOG_REPORT: report the test results
    LOG_REPORT   := awk '/\[OK\][\r]*$$/{p++} /\[FAIL\][\r]*$$/{f++} /\[SKIPPED\][\r]*$$/{s++} \
	                 END{ printf("%d test(s) passed, %d skipped, %d failed.", p, s, f); \
	                 printf(" See all results in %s\n", ARGV[1]); }'

    run-user: nolibc-test
	$(Q)qemu-$(QEMU_ARCH) ./nolibc-test > "$(CURDIR)/run.out" || :
	$(Q)$(LOG_REPORT) $(CURDIR)/run.out

    run: kernel
	$(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(srctree)/$(IMAGE)" -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out"
	$(Q)$(LOG_REPORT) $(CURDIR)/run.out

    rerun:
	$(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(srctree)/$(IMAGE)" -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out"
	$(Q)$(LOG_REPORT) $(CURDIR)/run.out

Or we directly add a standalone test report script? something like
tools/testing/selftests/nolibc/report.sh

    #!/bin/sh
    #
    # report.sh -- report the test results of nolibc-test
    #
    
    LOG_FILE=$1
    [ ! -f "$LOG_FILE" ] && echo "Usage: $0 /path/to/run.out"
    
    awk '
        /\[OK\][\r]*$$/{ p++ }
        /\[FAIL\][\r]*$$/{ f++ }
        /\[SKIPPED\][\r]*$$/{ s++ }
    
        END {
            printf("%d test(s) passed, %d skipped, %d failed.", p, s, f);
            printf(" See all results in %s\n", ARGV[1]);
        }' $LOG_FILE

And use it like this:

    LOG_REPORT           = $(CURDIR)/report.sh

Best regards,
Zhangjin

> Willy
  
Zhangjin Wu June 7, 2023, 5:52 a.m. UTC | #3
Hi, Willy

> > On Mon, Jun 05, 2023 at 11:48:52AM +0800, Zhangjin Wu wrote:
> > > A standalone test-report target is added to let the run, run-user and
> > > rerun targets share them.
> > > 
> > > Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
> > > ---
> > >  tools/testing/selftests/nolibc/Makefile | 26 ++++++++++++-------------
> > >  1 file changed, 13 insertions(+), 13 deletions(-)
> > > 
> > > diff --git a/tools/testing/selftests/nolibc/Makefile b/tools/testing/selftests/nolibc/Makefile
> > > index be4159837494..8149ace2938a 100644
> > > --- a/tools/testing/selftests/nolibc/Makefile
> > > +++ b/tools/testing/selftests/nolibc/Makefile
> > > @@ -127,14 +127,18 @@ nolibc-test: nolibc-test.c sysroot/$(ARCH)/include
> > >  libc-test: nolibc-test.c
> > >  	$(QUIET_CC)$(CC) -o $@ $<
> > >  
> > > -# qemu user-land test
> > > -run-user: nolibc-test
> > > -	$(Q)qemu-$(QEMU_ARCH) ./nolibc-test > "$(CURDIR)/run.out" || :
> > > +test-report:
> > >  	$(Q)awk '/\[OK\]$$/{p++} /\[FAIL\]$$/{f++} /\[SKIPPED\]$$/{s++} \
> > >  	         END{ printf("%d test(s) passed, %d skipped, %d failed.", p, s, f); \
> > >  	         if (s+f > 0) printf(" See all results in %s\n", ARGV[1]); else print; }' \
> > >  	         $(CURDIR)/run.out
> > >  
> > > +# qemu user-land test
> > > +_run-user: nolibc-test
> > > +	$(Q)qemu-$(QEMU_ARCH) ./nolibc-test > "$(CURDIR)/run.out" || :
> > > +
> > > +run-user: _run-user test-report
> > > +
> > 
> > This will not reliably work, there's no ordering here, nothing guarantees
> > that test-report will run *after* _run-user (e.g. make -j). Another
> > approach is needed if you want to factor this, but in general creating
> > sequences in makefiles is difficult and often more painful than having
> > 3 times the same 3 lines.
> >
> 
> Ok, thanks, what about this?
> 
>     # LOG_REPORT: report the test results
>     LOG_REPORT   := awk '/\[OK\][\r]*$$/{p++} /\[FAIL\][\r]*$$/{f++} /\[SKIPPED\][\r]*$$/{s++} \
> 	                 END{ printf("%d test(s) passed, %d skipped, %d failed.", p, s, f); \
> 	                 printf(" See all results in %s\n", ARGV[1]); }'
> 
>     run-user: nolibc-test
> 	$(Q)qemu-$(QEMU_ARCH) ./nolibc-test > "$(CURDIR)/run.out" || :
> 	$(Q)$(LOG_REPORT) $(CURDIR)/run.out
> 
>     run: kernel
> 	$(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(srctree)/$(IMAGE)" -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out"
> 	$(Q)$(LOG_REPORT) $(CURDIR)/run.out
> 
>     rerun:
> 	$(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(srctree)/$(IMAGE)" -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out"
> 	$(Q)$(LOG_REPORT) $(CURDIR)/run.out
> 
> Or we directly add a standalone test report script? something like
> tools/testing/selftests/nolibc/report.sh
> 
>     #!/bin/sh
>     #
>     # report.sh -- report the test results of nolibc-test
>     #
>     
>     LOG_FILE=$1
>     [ ! -f "$LOG_FILE" ] && echo "Usage: $0 /path/to/run.out"
>     
>     awk '
>         /\[OK\][\r]*$$/{ p++ }
>         /\[FAIL\][\r]*$$/{ f++ }
>         /\[SKIPPED\][\r]*$$/{ s++ }
>     
>         END {
>             printf("%d test(s) passed, %d skipped, %d failed.", p, s, f);
>             printf(" See all results in %s\n", ARGV[1]);
>         }' $LOG_FILE
> 
> And use it like this:
> 
>     LOG_REPORT           = $(CURDIR)/report.sh
>

I plan to renew this patchset, which one of the above methods do you
prefer?

For the always print statement:

    printf(" See all results in %s\n", ARGV[1]); }'

I will paste the reason why I need it, as mentioned in [1], if you still
need a clean test report, I will give up this change ;-)

Thanks,
Zhangjin
---
[1]: https://lore.kernel.org/linux-riscv/20230605070508.153407-1-falcon@tinylab.org/ 

> Best regards,
> Zhangjin
>
> > Willy
  
Willy Tarreau June 7, 2023, 12:45 p.m. UTC | #4
Hi Zhangjin,

On Wed, Jun 07, 2023 at 01:52:00PM +0800, Zhangjin Wu wrote:
> Hi, Willy
> 
> > > On Mon, Jun 05, 2023 at 11:48:52AM +0800, Zhangjin Wu wrote:
> > > > A standalone test-report target is added to let the run, run-user and
> > > > rerun targets share them.
> > > > 
> > > > Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
> > > > ---
> > > >  tools/testing/selftests/nolibc/Makefile | 26 ++++++++++++-------------
> > > >  1 file changed, 13 insertions(+), 13 deletions(-)
> > > > 
> > > > diff --git a/tools/testing/selftests/nolibc/Makefile b/tools/testing/selftests/nolibc/Makefile
> > > > index be4159837494..8149ace2938a 100644
> > > > --- a/tools/testing/selftests/nolibc/Makefile
> > > > +++ b/tools/testing/selftests/nolibc/Makefile
> > > > @@ -127,14 +127,18 @@ nolibc-test: nolibc-test.c sysroot/$(ARCH)/include
> > > >  libc-test: nolibc-test.c
> > > >  	$(QUIET_CC)$(CC) -o $@ $<
> > > >  
> > > > -# qemu user-land test
> > > > -run-user: nolibc-test
> > > > -	$(Q)qemu-$(QEMU_ARCH) ./nolibc-test > "$(CURDIR)/run.out" || :
> > > > +test-report:
> > > >  	$(Q)awk '/\[OK\]$$/{p++} /\[FAIL\]$$/{f++} /\[SKIPPED\]$$/{s++} \
> > > >  	         END{ printf("%d test(s) passed, %d skipped, %d failed.", p, s, f); \
> > > >  	         if (s+f > 0) printf(" See all results in %s\n", ARGV[1]); else print; }' \
> > > >  	         $(CURDIR)/run.out
> > > >  
> > > > +# qemu user-land test
> > > > +_run-user: nolibc-test
> > > > +	$(Q)qemu-$(QEMU_ARCH) ./nolibc-test > "$(CURDIR)/run.out" || :
> > > > +
> > > > +run-user: _run-user test-report
> > > > +
> > > 
> > > This will not reliably work, there's no ordering here, nothing guarantees
> > > that test-report will run *after* _run-user (e.g. make -j). Another
> > > approach is needed if you want to factor this, but in general creating
> > > sequences in makefiles is difficult and often more painful than having
> > > 3 times the same 3 lines.
> > >
> > 
> > Ok, thanks, what about this?
> > 
> >     # LOG_REPORT: report the test results
> >     LOG_REPORT   := awk '/\[OK\][\r]*$$/{p++} /\[FAIL\][\r]*$$/{f++} /\[SKIPPED\][\r]*$$/{s++} \
> > 	                 END{ printf("%d test(s) passed, %d skipped, %d failed.", p, s, f); \
> > 	                 printf(" See all results in %s\n", ARGV[1]); }'
> > 
> >     run-user: nolibc-test
> > 	$(Q)qemu-$(QEMU_ARCH) ./nolibc-test > "$(CURDIR)/run.out" || :
> > 	$(Q)$(LOG_REPORT) $(CURDIR)/run.out
> > 
> >     run: kernel
> > 	$(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(srctree)/$(IMAGE)" -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out"
> > 	$(Q)$(LOG_REPORT) $(CURDIR)/run.out
> > 
> >     rerun:
> > 	$(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(srctree)/$(IMAGE)" -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out"
> > 	$(Q)$(LOG_REPORT) $(CURDIR)/run.out
> > 
> > Or we directly add a standalone test report script? something like
> > tools/testing/selftests/nolibc/report.sh
> > 
> >     #!/bin/sh
> >     #
> >     # report.sh -- report the test results of nolibc-test
> >     #
> >     
> >     LOG_FILE=$1
> >     [ ! -f "$LOG_FILE" ] && echo "Usage: $0 /path/to/run.out"
> >     
> >     awk '
> >         /\[OK\][\r]*$$/{ p++ }
> >         /\[FAIL\][\r]*$$/{ f++ }
> >         /\[SKIPPED\][\r]*$$/{ s++ }
> >     
> >         END {
> >             printf("%d test(s) passed, %d skipped, %d failed.", p, s, f);
> >             printf(" See all results in %s\n", ARGV[1]);
> >         }' $LOG_FILE
> > 
> > And use it like this:
> > 
> >     LOG_REPORT           = $(CURDIR)/report.sh
> >
> 
> I plan to renew this patchset, which one of the above methods do you
> prefer?

IFF it needs to be done I prefer the macro in the Makefile to avoid
depending on external scripts that are useless outside of the makefile.
BUT, my point remains that I adopted this so that I could quickly and
visually check that everything was OK. I'm fine with any other method
but I do not want to have to carefully read all these lines to make
sure I'm not mixing a "8" with a "0" (I'm mentioning this one because
it's exactly the one I had when I decided to add the extra values).
For example if you prepend "FAILURE: ", "WARNING: ", "SUCCESS: " in
front of these lines to summarize them depending on the highest level
encountered (success, skipped, failed), then I'm fine because it's
easy to check that all lines show the same word.

> For the always print statement:
> 
>     printf(" See all results in %s\n", ARGV[1]); }'

Then please put it on its own line without the leading space, this
will be even more readable.

> I will paste the reason why I need it, as mentioned in [1], if you still
> need a clean test report, I will give up this change ;-)

No worries, I don't want to be annoying if you need something, but I
don't want to be annoyed by changes either :-)

thanks,
Willy
  
Zhangjin Wu June 7, 2023, 2:15 p.m. UTC | #5
On Wed, Jun 07, 2023 at 01:52:00PM +0800, Zhangjin Wu wrote:
> > Hi, Willy
> > 
> (...)
> > > 
> > > Ok, thanks, what about this?
> > > 
> > >     # LOG_REPORT: report the test results
> > >     LOG_REPORT   := awk '/\[OK\][\r]*$$/{p++} /\[FAIL\][\r]*$$/{f++} /\[SKIPPED\][\r]*$$/{s++} \
> > > 	                 END{ printf("%d test(s) passed, %d skipped, %d failed.", p, s, f); \
> > > 	                 printf(" See all results in %s\n", ARGV[1]); }'
> > > 
> > >     run-user: nolibc-test
> > > 	$(Q)qemu-$(QEMU_ARCH) ./nolibc-test > "$(CURDIR)/run.out" || :
> > > 	$(Q)$(LOG_REPORT) $(CURDIR)/run.out
> > > 
> > >     run: kernel
> > > 	$(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(srctree)/$(IMAGE)" -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out"
> > > 	$(Q)$(LOG_REPORT) $(CURDIR)/run.out
> > > 
> > >     rerun:
> > > 	$(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(srctree)/$(IMAGE)" -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out"
> > > 	$(Q)$(LOG_REPORT) $(CURDIR)/run.out
> > > 
> > > Or we directly add a standalone test report script? something like
> > > tools/testing/selftests/nolibc/report.sh
> > > 
> > >     #!/bin/sh
> > >     #
> > >     # report.sh -- report the test results of nolibc-test
> > >     #
> > >     
> > >     LOG_FILE=$1
> > >     [ ! -f "$LOG_FILE" ] && echo "Usage: $0 /path/to/run.out"
> > >     
> > >     awk '
> > >         /\[OK\][\r]*$$/{ p++ }
> > >         /\[FAIL\][\r]*$$/{ f++ }
> > >         /\[SKIPPED\][\r]*$$/{ s++ }
> > >     
> > >         END {
> > >             printf("%d test(s) passed, %d skipped, %d failed.", p, s, f);
> > >             printf(" See all results in %s\n", ARGV[1]);
> > >         }' $LOG_FILE
> > > 
> > > And use it like this:
> > > 
> > >     LOG_REPORT           = $(CURDIR)/report.sh
> > >
> > 
> > I plan to renew this patchset, which one of the above methods do you
> > prefer?
> 
> IFF it needs to be done I prefer the macro in the Makefile to avoid
> depending on external scripts that are useless outside of the makefile.
> BUT, my point remains that I adopted this so that I could quickly and
> visually check that everything was OK. I'm fine with any other method
> but I do not want to have to carefully read all these lines to make
> sure I'm not mixing a "8" with a "0" (I'm mentioning this one because
> it's exactly the one I had when I decided to add the extra values).
> For example if you prepend "FAILURE: ", "WARNING: ", "SUCCESS: " in
> front of these lines to summarize them depending on the highest level
> encountered (success, skipped, failed), then I'm fine because it's
> easy to check that all lines show the same word.
> 

Ok.

> > For the always print statement:
> > 
> >     printf(" See all results in %s\n", ARGV[1]); }'
> 
> Then please put it on its own line without the leading space, this
> will be even more readable.
>

It is a good balance.

This may be more useful if we run this from the kselftest framework,
seems it is not able to run it from the 'kselftest' target currently,
here shares something I have tried:

I tried something like this, seems run-user works, but defconfig and run
not.

    diff --git a/tools/testing/selftests/nolibc/Makefile b/tools/testing/selftests/nolibc/Makefile
    index 4a3a105e1fdf..70693f6501c6 100644
    --- a/tools/testing/selftests/nolibc/Makefile
    +++ b/tools/testing/selftests/nolibc/Makefile
    @@ -83,6 +83,8 @@ CFLAGS  ?= -Os -fno-ident -fno-asynchronous-unwind-tables -std=c89 \
                    $(CFLAGS_$(ARCH)) $(CFLAGS_STACKPROTECTOR)
     LDFLAGS := -s
   
    +NOLIBC_SUBTARGETS ?= run-user
    +
     help:
            @echo "Supported targets under selftests/nolibc:"
            @echo "  all          call the \"run\" target below"
    @@ -110,7 +112,9 @@ help:
            @echo "  IMAGE_NAME    = $(if $(IMAGE_NAME),$(IMAGE_NAME),UNKNOWN_ARCH) [determined from \$$ARCH]"
            @echo ""

    -all: run
    +run_tests: $(NOLIBC_SUBTARGETS)
    +
    +all: $(NOLIBC_SUBTARGETS)

This can be triggered from the top-level kselftest framework:

    $ make -C /path/to/linux-stable kselftest TARGETS=nolibc NOLIBC_SUBTARGETS=run-user

And seems we still not support O= currently either.

> > I will paste the reason why I need it, as mentioned in [1], if you still
> > need a clean test report, I will give up this change ;-)
> 
> No worries, I don't want to be annoying if you need something, but I
> don't want to be annoyed by changes either :-)
> 

Thanks,
Zhangjin

> thanks,
> Willy
  

Patch

diff --git a/tools/testing/selftests/nolibc/Makefile b/tools/testing/selftests/nolibc/Makefile
index be4159837494..8149ace2938a 100644
--- a/tools/testing/selftests/nolibc/Makefile
+++ b/tools/testing/selftests/nolibc/Makefile
@@ -127,14 +127,18 @@  nolibc-test: nolibc-test.c sysroot/$(ARCH)/include
 libc-test: nolibc-test.c
 	$(QUIET_CC)$(CC) -o $@ $<
 
-# qemu user-land test
-run-user: nolibc-test
-	$(Q)qemu-$(QEMU_ARCH) ./nolibc-test > "$(CURDIR)/run.out" || :
+test-report:
 	$(Q)awk '/\[OK\]$$/{p++} /\[FAIL\]$$/{f++} /\[SKIPPED\]$$/{s++} \
 	         END{ printf("%d test(s) passed, %d skipped, %d failed.", p, s, f); \
 	         if (s+f > 0) printf(" See all results in %s\n", ARGV[1]); else print; }' \
 	         $(CURDIR)/run.out
 
+# qemu user-land test
+_run-user: nolibc-test
+	$(Q)qemu-$(QEMU_ARCH) ./nolibc-test > "$(CURDIR)/run.out" || :
+
+run-user: _run-user test-report
+
 initramfs: nolibc-test
 	$(QUIET_MKDIR)mkdir -p initramfs
 	$(call QUIET_INSTALL, initramfs/init)
@@ -147,20 +151,16 @@  kernel: initramfs
 	$(Q)$(MAKE) -C $(srctree) ARCH=$(ARCH) CC=$(CC) CROSS_COMPILE=$(CROSS_COMPILE) $(IMAGE_NAME) CONFIG_INITRAMFS_SOURCE=$(CURDIR)/initramfs
 
 # run the tests after building the kernel
-run: kernel
+_run: kernel
 	$(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(srctree)/$(IMAGE)" -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out"
-	$(Q)awk '/\[OK\]$$/{p++} /\[FAIL\]$$/{f++} /\[SKIPPED\]$$/{s++} \
-	         END{ printf("%d test(s) passed, %d skipped, %d failed.", p, s, f); \
-	         if (s+f > 0) printf(" See all results in %s\n", ARGV[1]); else print; }' \
-	         $(CURDIR)/run.out
+
+run: _run test-report
 
 # re-run the tests from an existing kernel
-rerun:
+_rerun:
 	$(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(srctree)/$(IMAGE)" -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out"
-	$(Q)awk '/\[OK\]$$/{p++} /\[FAIL\]$$/{f++} /\[SKIPPED\]$$/{s++} \
-	         END{ printf("%d test(s) passed, %d skipped, %d failed.", p, s, f); \
-	         if (s+f > 0) printf(" See all results in %s\n", ARGV[1]); else print; }' \
-	         $(CURDIR)/run.out
+
+rerun: _rerun test-report
 
 clean:
 	$(call QUIET_CLEAN, sysroot)