diff mbox series

[v4,03/15] drivers/perf: riscv: Read upper bits of a firmware counter

Message ID 20240229010130.1380926-4-atishp@rivosinc.com
State New
Headers
Series RISC-V SBI v2.0 PMU improvements and Perf sampling in KVM guest |

Commit Message

Atish Patra Feb. 29, 2024, 1:01 a.m. UTC 
  SBI v2.0 introduced a explicit function to read the upper 32 bits
for any firmwar counter width that is longer than 32bits.
This is only applicable for RV32 where firmware counter can be
64 bit.

Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
---
 drivers/perf/riscv_pmu_sbi.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

Comments

Andrew Jones March 1, 2024, 9:52 a.m. UTC | #1 
On Wed, Feb 28, 2024 at 05:01:18PM -0800, Atish Patra wrote:
> SBI v2.0 introduced a explicit function to read the upper 32 bits
> for any firmwar counter width that is longer than 32bits.

firmware

> This is only applicable for RV32 where firmware counter can be
> 64 bit.
> 
> Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> Reviewed-by: Anup Patel <anup@brainfault.org>
> Signed-off-by: Atish Patra <atishp@rivosinc.com>
> ---
>  drivers/perf/riscv_pmu_sbi.c | 20 ++++++++++++++++----
>  1 file changed, 16 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
> index 16acd4dcdb96..ea0fdb589f0d 100644
> --- a/drivers/perf/riscv_pmu_sbi.c
> +++ b/drivers/perf/riscv_pmu_sbi.c
> @@ -35,6 +35,8 @@
>  PMU_FORMAT_ATTR(event, "config:0-47");
>  PMU_FORMAT_ATTR(firmware, "config:63");
>  
> +static bool sbi_v2_available;
> +
>  static struct attribute *riscv_arch_formats_attr[] = {
>  	&format_attr_event.attr,
>  	&format_attr_firmware.attr,
> @@ -488,16 +490,23 @@ static u64 pmu_sbi_ctr_read(struct perf_event *event)
>  	struct hw_perf_event *hwc = &event->hw;
>  	int idx = hwc->idx;
>  	struct sbiret ret;
> -	union sbi_pmu_ctr_info info;
>  	u64 val = 0;
> +	union sbi_pmu_ctr_info info = pmu_ctr_list[idx];
>  
>  	if (pmu_sbi_is_fw_event(event)) {
>  		ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_FW_READ,
>  				hwc->idx, 0, 0, 0, 0, 0);
> -		if (!ret.error)
> -			val = ret.value;
> +		if (ret.error)
> +			return 0;
> +
> +		val = ret.value;
> +		if (IS_ENABLED(CONFIG_32BIT) && sbi_v2_available && info.width >= 32) {
> +			ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_FW_READ_HI,
> +					hwc->idx, 0, 0, 0, 0, 0);
> +			if (!ret.error)

Getting an error here indicates a buggy SBI. Maybe we should have a
warn-once?

> +				val |= ((u64)ret.value << 32);
> +		}
>  	} else {
> -		info = pmu_ctr_list[idx];
>  		val = riscv_pmu_ctr_read_csr(info.csr);
>  		if (IS_ENABLED(CONFIG_32BIT))
>  			val = ((u64)riscv_pmu_ctr_read_csr(info.csr + 0x80)) << 31 | val;
> @@ -1108,6 +1117,9 @@ static int __init pmu_sbi_devinit(void)
>  		return 0;
>  	}
>  
> +	if (sbi_spec_version >= sbi_mk_version(2, 0))
> +		sbi_v2_available = true;
> +
>  	ret = cpuhp_setup_state_multi(CPUHP_AP_PERF_RISCV_STARTING,
>  				      "perf/riscv/pmu:starting",
>  				      pmu_sbi_starting_cpu, pmu_sbi_dying_cpu);
> -- 
> 2.34.1
>

Either way,

Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
diff mbox series

Patch

diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
index 16acd4dcdb96..ea0fdb589f0d 100644
--- a/drivers/perf/riscv_pmu_sbi.c
+++ b/drivers/perf/riscv_pmu_sbi.c
@@ -35,6 +35,8 @@ 
 PMU_FORMAT_ATTR(event, "config:0-47");
 PMU_FORMAT_ATTR(firmware, "config:63");
 
+static bool sbi_v2_available;
+
 static struct attribute *riscv_arch_formats_attr[] = {
 	&format_attr_event.attr,
 	&format_attr_firmware.attr,
@@ -488,16 +490,23 @@  static u64 pmu_sbi_ctr_read(struct perf_event *event)
 	struct hw_perf_event *hwc = &event->hw;
 	int idx = hwc->idx;
 	struct sbiret ret;
-	union sbi_pmu_ctr_info info;
 	u64 val = 0;
+	union sbi_pmu_ctr_info info = pmu_ctr_list[idx];
 
 	if (pmu_sbi_is_fw_event(event)) {
 		ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_FW_READ,
 				hwc->idx, 0, 0, 0, 0, 0);
-		if (!ret.error)
-			val = ret.value;
+		if (ret.error)
+			return 0;
+
+		val = ret.value;
+		if (IS_ENABLED(CONFIG_32BIT) && sbi_v2_available && info.width >= 32) {
+			ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_FW_READ_HI,
+					hwc->idx, 0, 0, 0, 0, 0);
+			if (!ret.error)
+				val |= ((u64)ret.value << 32);
+		}
 	} else {
-		info = pmu_ctr_list[idx];
 		val = riscv_pmu_ctr_read_csr(info.csr);
 		if (IS_ENABLED(CONFIG_32BIT))
 			val = ((u64)riscv_pmu_ctr_read_csr(info.csr + 0x80)) << 31 | val;
@@ -1108,6 +1117,9 @@  static int __init pmu_sbi_devinit(void)
 		return 0;
 	}
 
+	if (sbi_spec_version >= sbi_mk_version(2, 0))
+		sbi_v2_available = true;
+
 	ret = cpuhp_setup_state_multi(CPUHP_AP_PERF_RISCV_STARTING,
 				      "perf/riscv/pmu:starting",
 				      pmu_sbi_starting_cpu, pmu_sbi_dying_cpu);