[v8,07/10] watchdog: rzg2l_wdt: Rely on the reset driver for doing proper reset
Commit Message
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
The reset driver has been adapted in commit da235d2fac21
("clk: renesas: rzg2l: Check reset monitor registers") to check the reset
monitor bits before declaring reset asserts/de-asserts as
successful/failure operations. With that, there is no need to keep the
reset workaround for RZ/V2M in place in the watchdog driver.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
---
Changes in v8:
- none
Changes in v7:
- none
Changes in v6:
- none
Changes in v5:
- none
Changes in v4:
- collected tag
Changes in v3:
- none
Changes in v2:
- none
drivers/watchdog/rzg2l_wdt.c | 39 ++++--------------------------------
1 file changed, 4 insertions(+), 35 deletions(-)
@@ -8,7 +8,6 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
-#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -54,35 +53,11 @@ struct rzg2l_wdt_priv {
struct reset_control *rstc;
unsigned long osc_clk_rate;
unsigned long delay;
- unsigned long minimum_assertion_period;
struct clk *pclk;
struct clk *osc_clk;
enum rz_wdt_type devtype;
};
-static int rzg2l_wdt_reset(struct rzg2l_wdt_priv *priv)
-{
- int err, status;
-
- if (priv->devtype == WDT_RZV2M) {
- /* WDT needs TYPE-B reset control */
- err = reset_control_assert(priv->rstc);
- if (err)
- return err;
- ndelay(priv->minimum_assertion_period);
- err = reset_control_deassert(priv->rstc);
- if (err)
- return err;
- err = read_poll_timeout(reset_control_status, status,
- status != 1, 0, 1000, false,
- priv->rstc);
- } else {
- err = reset_control_reset(priv->rstc);
- }
-
- return err;
-}
-
static void rzg2l_wdt_wait_delay(struct rzg2l_wdt_priv *priv)
{
/* delay timer when change the setting register */
@@ -187,13 +162,12 @@ static int rzg2l_wdt_restart(struct watchdog_device *wdev,
unsigned long action, void *data)
{
struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
+ int ret;
clk_prepare_enable(priv->pclk);
clk_prepare_enable(priv->osc_clk);
if (priv->devtype == WDT_RZG2L) {
- int ret;
-
ret = reset_control_deassert(priv->rstc);
if (ret)
return ret;
@@ -205,7 +179,9 @@ static int rzg2l_wdt_restart(struct watchdog_device *wdev,
rzg2l_wdt_write(priv, PEEN_FORCE, PEEN);
} else {
/* RZ/V2M doesn't have parity error registers */
- rzg2l_wdt_reset(priv);
+ ret = reset_control_reset(priv->rstc);
+ if (ret)
+ return ret;
wdev->timeout = 0;
@@ -297,13 +273,6 @@ static int rzg2l_wdt_probe(struct platform_device *pdev)
priv->devtype = (uintptr_t)of_device_get_match_data(dev);
- if (priv->devtype == WDT_RZV2M) {
- priv->minimum_assertion_period = RZV2M_A_NSEC +
- 3 * F2CYCLE_NSEC(pclk_rate) + 5 *
- max(F2CYCLE_NSEC(priv->osc_clk_rate),
- F2CYCLE_NSEC(pclk_rate));
- }
-
pm_runtime_enable(&pdev->dev);
priv->wdev.info = &rzg2l_wdt_ident;