[10/12] rtc: ds1511: implement ds1511_rtc_read_alarm properly
Commit Message
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
ds1511_rtc_read_alarm was useless as it is only called at boot time so
the alarm members of pdata have not yet been set. Read the actual registers
so there is a chance to get a meaningful value.
Then, drop the alarm related members of pdata as they are not used anymore.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/rtc/rtc-ds1511.c | 31 +++++++++----------------------
1 file changed, 9 insertions(+), 22 deletions(-)
@@ -63,11 +63,6 @@ struct rtc_plat_data {
struct rtc_device *rtc;
void __iomem *ioaddr; /* virtual base address */
int irq;
- unsigned int irqen;
- int alrm_sec;
- int alrm_min;
- int alrm_hour;
- int alrm_mday;
spinlock_t lock;
};
@@ -188,18 +183,11 @@ static int ds1511_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
struct rtc_plat_data *pdata = dev_get_drvdata(dev);
unsigned long flags;
- pdata->alrm_mday = alrm->time.tm_mday;
- pdata->alrm_hour = alrm->time.tm_hour;
- pdata->alrm_min = alrm->time.tm_min;
- pdata->alrm_sec = alrm->time.tm_sec;
- if (alrm->enabled)
- pdata->irqen |= RTC_AF;
-
spin_lock_irqsave(&pdata->lock, flags);
- rtc_write(bin2bcd(pdata->alrm_mday) & 0x3f, DS1511_AM4_DATE);
- rtc_write(bin2bcd(pdata->alrm_hour) & 0x3f, DS1511_AM3_HOUR);
- rtc_write(bin2bcd(pdata->alrm_min) & 0x7f, DS1511_AM2_MIN);
- rtc_write(bin2bcd(pdata->alrm_sec) & 0x7f, DS1511_AM1_SEC);
+ rtc_write(bin2bcd(alrm->time.tm_mday) & 0x3f, DS1511_AM4_DATE);
+ rtc_write(bin2bcd(alrm->time.tm_hour) & 0x3f, DS1511_AM3_HOUR);
+ rtc_write(bin2bcd(alrm->time.tm_min) & 0x7f, DS1511_AM2_MIN);
+ rtc_write(bin2bcd(alrm->time.tm_sec) & 0x7f, DS1511_AM1_SEC);
ds1511_rtc_alarm_enable(alrm->enabled);
rtc_read(DS1511_CONTROL_A); /* clear interrupts */
@@ -210,13 +198,12 @@ static int ds1511_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
static int ds1511_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
- struct rtc_plat_data *pdata = dev_get_drvdata(dev);
+ alrm->time.tm_mday = bcd2bin(rtc_read(DS1511_AM4_DATE) & 0x3f);
+ alrm->time.tm_hour = bcd2bin(rtc_read(DS1511_AM3_HOUR) & 0x3f);
+ alrm->time.tm_min = bcd2bin(rtc_read(DS1511_AM2_MIN) & 0x7f);
+ alrm->time.tm_sec = bcd2bin(rtc_read(DS1511_AM1_SEC) & 0x7f);
+ alrm->enabled = !!(rtc_read(DS1511_CONTROL_B) & DS1511_TIE);
- alrm->time.tm_mday = pdata->alrm_mday < 0 ? 0 : pdata->alrm_mday;
- alrm->time.tm_hour = pdata->alrm_hour < 0 ? 0 : pdata->alrm_hour;
- alrm->time.tm_min = pdata->alrm_min < 0 ? 0 : pdata->alrm_min;
- alrm->time.tm_sec = pdata->alrm_sec < 0 ? 0 : pdata->alrm_sec;
- alrm->enabled = (pdata->irqen & RTC_AF) ? 1 : 0;
return 0;
}