[V7,5/6] arm64: dts: imx8mp: add HDMI display pipeline
Commit Message
From: Lucas Stach <l.stach@pengutronix.de>
This adds the DT nodes for all the peripherals that make up the
HDMI display pipeline.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Adam Ford <aford173@gmail.com>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
---
V7: Make PVI node disabled by default to avoid EPROBE_DEFER
V6: Make LCDIF3 disabled by default
V5: No change
V3: Re-ordered the HDMI parts to properly come after irqstree_hdmi
inside AIPS4. Change size of LCDIF3 and PVI to match TRM sizes
of 4KB.
V2: I took this from Lucas' original submission with the following:
Removed extra clock from HDMI-TX since it is now part of the
power domain
Added interrupt-parent to PVI
Changed the name of the HDMI tranmitter to fsl,imx8mp-hdmi-tx
Added ports to HDMI-tx
---
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 96 +++++++++++++++++++++++
1 file changed, 96 insertions(+)
@@ -1940,6 +1940,102 @@ irqsteer_hdmi: interrupt-controller@32fc2000 {
clock-names = "ipg";
power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_IRQSTEER>;
};
+
+ hdmi_pvi: display-bridge@32fc4000 {
+ compatible = "fsl,imx8mp-hdmi-pvi";
+ reg = <0x32fc4000 0x1000>;
+ interrupt-parent = <&irqsteer_hdmi>;
+ interrupts = <12>;
+ power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ pvi_from_lcdif3: endpoint {
+ remote-endpoint = <&lcdif3_to_pvi>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ pvi_to_hdmi_tx: endpoint {
+ remote-endpoint = <&hdmi_tx_from_pvi>;
+ };
+ };
+ };
+ };
+
+ lcdif3: display-controller@32fc6000 {
+ compatible = "fsl,imx8mp-lcdif";
+ reg = <0x32fc6000 0x1000>;
+ interrupt-parent = <&irqsteer_hdmi>;
+ interrupts = <8>;
+ clocks = <&hdmi_tx_phy>,
+ <&clk IMX8MP_CLK_HDMI_APB>,
+ <&clk IMX8MP_CLK_HDMI_ROOT>;
+ clock-names = "pix", "axi", "disp_axi";
+ power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_LCDIF>;
+ status = "disabled";
+
+ port {
+ lcdif3_to_pvi: endpoint {
+ remote-endpoint = <&pvi_from_lcdif3>;
+ };
+ };
+ };
+
+ hdmi_tx: hdmi@32fd8000 {
+ compatible = "fsl,imx8mp-hdmi-tx";
+ reg = <0x32fd8000 0x7eff>;
+ interrupt-parent = <&irqsteer_hdmi>;
+ interrupts = <0>;
+ clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+ <&clk IMX8MP_CLK_HDMI_REF_266M>,
+ <&clk IMX8MP_CLK_32K>,
+ <&hdmi_tx_phy>;
+ clock-names = "iahb", "isfr", "cec", "pix";
+ assigned-clocks = <&clk IMX8MP_CLK_HDMI_REF_266M>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>;
+ power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>;
+ reg-io-width = <1>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ hdmi_tx_from_pvi: endpoint {
+ remote-endpoint = <&pvi_to_hdmi_tx>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ /* Point endpoint to the HDMI connector */
+ };
+ };
+ };
+
+ hdmi_tx_phy: phy@32fdff00 {
+ compatible = "fsl,imx8mp-hdmi-phy";
+ reg = <0x32fdff00 0x100>;
+ clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+ <&clk IMX8MP_CLK_HDMI_24M>;
+ clock-names = "apb", "ref";
+ assigned-clocks = <&clk IMX8MP_CLK_HDMI_24M>;
+ assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+ power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX_PHY>;
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
};
pcie: pcie@33800000 {