diff mbox series

[net-next,1/2] net: phy: qcom: qca808x: add helper for checking for 1G only model

Message ID 20240227162030.2728618-2-robimarko@gmail.com
State New
Headers
Series net: phy: qcom: qca808x: fill in possible_interfaces |

Commit Message

Robert Marko Feb. 27, 2024, 4:19 p.m. UTC 
  There are 2 versions of QCA808x, one 2.5G capable and one 1G capable.
Currently, this matter only in the .get_features call however, it will
be required for filling supported interface modes so lets add a helper
that can be reused.

Signed-off-by: Robert Marko <robimarko@gmail.com>
---
 drivers/net/phy/qcom/qca808x.c | 20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

Comments

Russell King (Oracle) Feb. 27, 2024, 4:28 p.m. UTC | #1 
On Tue, Feb 27, 2024 at 05:19:28PM +0100, Robert Marko wrote:
> +	if (QCA808X_PHY_CHIP_TYPE_1G & ret)
> +		return true;
> +	else
> +		return false;

	return !!(QCA808X_PHY_CHIP_TYPE_1G & ret);

is a shorter way to write that.
diff mbox series

Patch

diff --git a/drivers/net/phy/qcom/qca808x.c b/drivers/net/phy/qcom/qca808x.c
index 2acf852fb4de..16c94e77646f 100644
--- a/drivers/net/phy/qcom/qca808x.c
+++ b/drivers/net/phy/qcom/qca808x.c
@@ -156,6 +156,20 @@  static bool qca808x_has_fast_retrain_or_slave_seed(struct phy_device *phydev)
 	return linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported);
 }
 
+static bool qca808x_is_1g_only(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_CHIP_TYPE);
+	if (ret < 0)
+		return true;
+
+	if (QCA808X_PHY_CHIP_TYPE_1G & ret)
+		return true;
+	else
+		return false;
+}
+
 static int qca808x_probe(struct phy_device *phydev)
 {
 	struct device *dev = &phydev->mdio.dev;
@@ -350,11 +364,7 @@  static int qca808x_get_features(struct phy_device *phydev)
 	 * existed in the bit0 of MMD1.21, we need to remove it manually if
 	 * it is the qca8081 1G chip according to the bit0 of MMD7.0x901d.
 	 */
-	ret = phy_read_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_CHIP_TYPE);
-	if (ret < 0)
-		return ret;
-
-	if (QCA808X_PHY_CHIP_TYPE_1G & ret)
+	if (qca808x_is_1g_only(phydev))
 		linkmode_clear_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported);
 
 	return 0;