diff mbox series

[2/2] usb: misc: onboard_usb_hub: Add support for TI TUSB8020B

Message ID 20240227090228.22156-2-macpaul.lin@mediatek.com
State New
Headers
Series [1/2] dt-bindings: usb: Add binding for TI USB8020B hub controller |

Commit Message

Macpaul Lin Feb. 27, 2024, 9:02 a.m. UTC 
  The TI TUSB8020B is a 2-port USB 3.0 hub. Add support for
this hub in the driver in order to bring up reset, and supply
dependencies.

Power-up: Issue a GPIO reset (GRSTz) 3ms after VDD and VDD33 stabilize.

Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
---
 drivers/usb/misc/onboard_usb_hub.c | 2 ++
 drivers/usb/misc/onboard_usb_hub.h | 7 +++++++
 2 files changed, 9 insertions(+)

Comments

AngeloGioacchino Del Regno Feb. 27, 2024, 1:05 p.m. UTC | #1 
Il 27/02/24 10:02, Macpaul Lin ha scritto:
> The TI TUSB8020B is a 2-port USB 3.0 hub. Add support for
> this hub in the driver in order to bring up reset, and supply
> dependencies.
> 
> Power-up: Issue a GPIO reset (GRSTz) 3ms after VDD and VDD33 stabilize.
> 
> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Matthias Kaehlcke Feb. 27, 2024, 6:38 p.m. UTC | #2 
On Tue, Feb 27, 2024 at 05:02:28PM +0800, Macpaul Lin wrote:
> The TI TUSB8020B is a 2-port USB 3.0 hub. Add support for
> this hub in the driver in order to bring up reset, and supply
> dependencies.
> 
> Power-up: Issue a GPIO reset (GRSTz) 3ms after VDD and VDD33 stabilize.
> 
> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>

Generally this looks good to me, but it should probably wait for
"usb: misc: onboard_dev: use device supply names" [1] to land and
use a device specific supply name instead of 'vdd'.

[1] https://lore.kernel.org/linux-usb/20240220-onboard_xvf3500-v4-6-dc1617cc5dd4@wolfvision.net/
diff mbox series

Patch

diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c
index 1e169c97f45e..e19c11a64923 100644
--- a/drivers/usb/misc/onboard_usb_hub.c
+++ b/drivers/usb/misc/onboard_usb_hub.c
@@ -457,6 +457,8 @@  static const struct usb_device_id onboard_hub_id_table[] = {
 	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x5411) }, /* RTS5411 USB 2.1 */
 	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x0414) }, /* RTS5414 USB 3.2 */
 	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x5414) }, /* RTS5414 USB 2.1 */
+	{ USB_DEVICE(VENDOR_ID_TI, 0x8025) }, /* TI USB8020B 3.0 */
+	{ USB_DEVICE(VENDOR_ID_TI, 0x8027) }, /* TI USB8020B 2.0 */
 	{ USB_DEVICE(VENDOR_ID_TI, 0x8140) }, /* TI USB8041 3.0 */
 	{ USB_DEVICE(VENDOR_ID_TI, 0x8142) }, /* TI USB8041 2.0 */
 	{ USB_DEVICE(VENDOR_ID_VIA, 0x0817) }, /* VIA VL817 3.1 */
diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h
index 373192afd022..874473e60132 100644
--- a/drivers/usb/misc/onboard_usb_hub.h
+++ b/drivers/usb/misc/onboard_usb_hub.h
@@ -31,6 +31,11 @@  static const struct onboard_hub_pdata realtek_rts5411_data = {
 	.num_supplies = 1,
 };
 
+static const struct onboard_hub_pdata ti_tusb8020b_data = {
+	.reset_us = 3000,
+	.num_supplies = 1,
+};
+
 static const struct onboard_hub_pdata ti_tusb8041_data = {
 	.reset_us = 3000,
 	.num_supplies = 1,
@@ -70,6 +75,8 @@  static const struct of_device_id onboard_hub_match[] = {
 	{ .compatible = "usb424,2744", .data = &microchip_usb5744_data, },
 	{ .compatible = "usb424,5733", .data = &microchip_usb5734_data, },
 	{ .compatible = "usb424,5744", .data = &microchip_usb5744_data, },
+	{ .compatible = "usb451,8025", .data = &ti_tusb8020b_data, },
+	{ .compatible = "usb451,8027", .data = &ti_tusb8020b_data, },
 	{ .compatible = "usb451,8140", .data = &ti_tusb8041_data, },
 	{ .compatible = "usb451,8142", .data = &ti_tusb8041_data, },
 	{ .compatible = "usb4b4,6504", .data = &cypress_hx3_data, },