[net-next,v5,03/17] net: pse-pd: Rectify and adapt the naming of admin_cotrol member of struct pse_control_config

Message ID 20240227-feature_poe-v5-3-28f0aa48246d@bootlin.com
State New
Headers
Series net: Add support for Power over Ethernet (PoE) |

Commit Message

Köry Maincent Feb. 27, 2024, 2:42 p.m. UTC
  In commit 18ff0bcda6d1 ("ethtool: add interface to interact with Ethernet
Power Equipment"), the 'pse_control_config' structure was introduced,
housing a single member labeled 'admin_cotrol' responsible for maintaining
the operational state of the PoDL PSE functions.

A noticeable typographical error exists in the naming of this field
('cotrol' should be corrected to 'control'), which this commit aims to
rectify.

Furthermore, with upcoming extensions of this structure to encompass PoE
functionalities, the field is being renamed to 'podl_admin_state' to
distinctly indicate that this state is tailored specifically for PoDL."

This patch is sponsored by Dent Project <dentproject@linuxfoundation.org>.

Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
---
 drivers/net/pse-pd/pse_regulator.c | 8 ++++----
 include/linux/pse-pd/pse.h         | 4 ++--
 net/ethtool/pse-pd.c               | 2 +-
 3 files changed, 7 insertions(+), 7 deletions(-)
  

Patch

diff --git a/drivers/net/pse-pd/pse_regulator.c b/drivers/net/pse-pd/pse_regulator.c
index e2bf8306ca90..1dedf4de296e 100644
--- a/drivers/net/pse-pd/pse_regulator.c
+++ b/drivers/net/pse-pd/pse_regulator.c
@@ -31,10 +31,10 @@  pse_reg_ethtool_set_config(struct pse_controller_dev *pcdev, unsigned long id,
 	struct pse_reg_priv *priv = to_pse_reg(pcdev);
 	int ret;
 
-	if (priv->admin_state == config->admin_cotrol)
+	if (priv->admin_state == config->podl_admin_control)
 		return 0;
 
-	switch (config->admin_cotrol) {
+	switch (config->podl_admin_control) {
 	case ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED:
 		ret = regulator_enable(priv->ps);
 		break;
@@ -43,14 +43,14 @@  pse_reg_ethtool_set_config(struct pse_controller_dev *pcdev, unsigned long id,
 		break;
 	default:
 		dev_err(pcdev->dev, "Unknown admin state %i\n",
-			config->admin_cotrol);
+			config->podl_admin_control);
 		ret = -ENOTSUPP;
 	}
 
 	if (ret)
 		return ret;
 
-	priv->admin_state = config->admin_cotrol;
+	priv->admin_state = config->podl_admin_control;
 
 	return 0;
 }
diff --git a/include/linux/pse-pd/pse.h b/include/linux/pse-pd/pse.h
index fb724c65c77b..199cf4ae3cf2 100644
--- a/include/linux/pse-pd/pse.h
+++ b/include/linux/pse-pd/pse.h
@@ -15,11 +15,11 @@  struct pse_controller_dev;
 /**
  * struct pse_control_config - PSE control/channel configuration.
  *
- * @admin_cotrol: set PoDL PSE admin control as described in
+ * @podl_admin_control: set PoDL PSE admin control as described in
  *	IEEE 802.3-2018 30.15.1.2.1 acPoDLPSEAdminControl
  */
 struct pse_control_config {
-	enum ethtool_podl_pse_admin_state admin_cotrol;
+	enum ethtool_podl_pse_admin_state podl_admin_control;
 };
 
 /**
diff --git a/net/ethtool/pse-pd.c b/net/ethtool/pse-pd.c
index cc478af77111..aef57a058f0d 100644
--- a/net/ethtool/pse-pd.c
+++ b/net/ethtool/pse-pd.c
@@ -130,7 +130,7 @@  ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
 	struct phy_device *phydev;
 
 	/* this values are already validated by the ethnl_pse_set_policy */
-	config.admin_cotrol = nla_get_u32(tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL]);
+	config.podl_admin_control = nla_get_u32(tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL]);
 
 	phydev = dev->phydev;
 	if (!phydev) {