[v2] dt-bindings: serial: convert st,asc to DT schema
Commit Message
'clocks' property is required regarding the device. Convert st,asc
binding to DT schema format in order to add this property, and update
example.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
---
Changes in v2:
- Drop 'uart-has-rtscts' property
- Rewrite commit log to better match the changes
---
.../devicetree/bindings/serial/st,asc.yaml | 55 +++++++++++++++++++
.../devicetree/bindings/serial/st-asc.txt | 18 ------
2 files changed, 55 insertions(+), 18 deletions(-)
create mode 100644 Documentation/devicetree/bindings/serial/st,asc.yaml
delete mode 100644 Documentation/devicetree/bindings/serial/st-asc.txt
Comments
On 26/02/2024 16:21, Raphael Gallais-Pou wrote:
> 'clocks' property is required regarding the device. Convert st,asc
> binding to DT schema format in order to add this property, and update
> example.
>
> Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
This is an automated instruction, just in case, because many review tags
are being ignored. If you know the process, you can skip it (please do
not feel offended by me posting it here - no bad intentions intended).
If you do not know the process, here is a short explanation:
Please add Acked-by/Reviewed-by/Tested-by tags when posting new
versions, under or above your Signed-off-by tag. Tag is "received", when
provided in a message replied to you on the mailing list. Tools like b4
can help here. However, there's no need to repost patches *only* to add
the tags. The upstream maintainer will do that for tags received on the
version they apply.
https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577
Best regards,
Krzysztof
new file mode 100644
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/st,asc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STi SoCs Serial Port
+
+maintainers:
+ - Patrice Chotard <patrice.chotard@foss.st.com>
+
+allOf:
+ - $ref: serial.yaml#
+
+properties:
+ compatible:
+ const: st,asc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ st,hw-flow-ctrl:
+ description: When set, enable hardware flow control.
+ type: boolean
+
+ st,force-m1:
+ description: When set, force asc to be in Mode-1. This is recommended for
+ high bit rates above 19.2K.
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/stih407-clks.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ serial@9830000 {
+ compatible = "st,asc";
+ reg = <0x9830000 0x2c>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ };
+...
deleted file mode 100644
@@ -1,18 +0,0 @@
-*st-asc(Serial Port)
-
-Required properties:
-- compatible : Should be "st,asc".
-- reg, reg-names, interrupts, interrupt-names : Standard way to define device
- resources with names. look in
- Documentation/devicetree/bindings/resource-names.txt
-
-Optional properties:
-- st,hw-flow-ctrl bool flag to enable hardware flow control.
-- st,force-m1 bool flat to force asc to be in Mode-1 recommended
- for high bit rates (above 19.2K)
-Example:
-serial@fe440000{
- compatible = "st,asc";
- reg = <0xfe440000 0x2c>;
- interrupts = <0 209 0>;
-};