[v4,01/16] dt-bindings: pinctrl: fsl,imx6ul-pinctrl: convert to YAML
Commit Message
Convert i.MX6UL pinctrl bindings to YAML.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
---
.../bindings/pinctrl/fsl,imx6ul-pinctrl.txt | 37 ------
.../bindings/pinctrl/fsl,imx6ul-pinctrl.yaml | 116 ++++++++++++++++++
2 files changed, 116 insertions(+), 37 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.yaml
deleted file mode 100644
@@ -1,37 +0,0 @@
-* Freescale i.MX6 UltraLite IOMUX Controller
-
-Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
-and usage.
-
-Required properties:
-- compatible: "fsl,imx6ul-iomuxc" for main IOMUX controller or
- "fsl,imx6ull-iomuxc-snvs" for i.MX 6ULL's SNVS IOMUX controller.
-- fsl,pins: each entry consists of 6 integers and represents the mux and config
- setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
- input_val> are specified using a PIN_FUNC_ID macro, which can be found in
- imx6ul-pinfunc.h under device tree source folder. The last integer CONFIG is
- the pad setting value like pull-up on this pin. Please refer to i.MX6 UltraLite
- Reference Manual for detailed CONFIG settings.
-
-CONFIG bits definition:
-PAD_CTL_HYS (1 << 16)
-PAD_CTL_PUS_100K_DOWN (0 << 14)
-PAD_CTL_PUS_47K_UP (1 << 14)
-PAD_CTL_PUS_100K_UP (2 << 14)
-PAD_CTL_PUS_22K_UP (3 << 14)
-PAD_CTL_PUE (1 << 13)
-PAD_CTL_PKE (1 << 12)
-PAD_CTL_ODE (1 << 11)
-PAD_CTL_SPEED_LOW (0 << 6)
-PAD_CTL_SPEED_MED (1 << 6)
-PAD_CTL_SPEED_HIGH (3 << 6)
-PAD_CTL_DSE_DISABLE (0 << 3)
-PAD_CTL_DSE_260ohm (1 << 3)
-PAD_CTL_DSE_130ohm (2 << 3)
-PAD_CTL_DSE_87ohm (3 << 3)
-PAD_CTL_DSE_65ohm (4 << 3)
-PAD_CTL_DSE_52ohm (5 << 3)
-PAD_CTL_DSE_43ohm (6 << 3)
-PAD_CTL_DSE_37ohm (7 << 3)
-PAD_CTL_SRE_FAST (1 << 0)
-PAD_CTL_SRE_SLOW (0 << 0)
new file mode 100644
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx6ul-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMX6UL IOMUX Controller
+
+maintainers:
+ - Dong Aisheng <aisheng.dong@nxp.com>
+
+description:
+ Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+ for common binding part and usage.
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx6ul-iomuxc
+ - fsl,imx6ull-iomuxc-snvs
+
+ reg:
+ maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+ 'grp$':
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+
+ properties:
+ fsl,pins:
+ description:
+ each entry consists of 6 integers and represents the mux and config
+ setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+ mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+ be found in <arch/arm/boot/dts/imx6ul-pinfunc.h>. The last integer
+ CONFIG is the pad setting value like pull-up on this pin. Please
+ refer to i.MX6UL Reference Manual for detailed CONFIG settings.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: |
+ "mux_reg" indicates the offset of mux register.
+ - description: |
+ "conf_reg" indicates the offset of pad configuration register.
+ - description: |
+ "input_reg" indicates the offset of select input register.
+ - description: |
+ "mux_val" indicates the mux value to be applied.
+ - description: |
+ "input_val" indicates the select input value to be applied.
+ - description: |
+ "pad_setting" indicates the pad configuration value to be applied:
+ PAD_CTL_HYS (1 << 16)
+ PAD_CTL_PUS_100K_DOWN (0 << 14)
+ PAD_CTL_PUS_47K_UP (1 << 14)
+ PAD_CTL_PUS_100K_UP (2 << 14)
+ PAD_CTL_PUS_22K_UP (3 << 14)
+ PAD_CTL_PUE (1 << 13)
+ PAD_CTL_PKE (1 << 12)
+ PAD_CTL_ODE (1 << 11)
+ PAD_CTL_SPEED_LOW (0 << 6)
+ PAD_CTL_SPEED_MED (1 << 6)
+ PAD_CTL_SPEED_HIGH (3 << 6)
+ PAD_CTL_DSE_DISABLE (0 << 3)
+ PAD_CTL_DSE_260ohm (1 << 3)
+ PAD_CTL_DSE_130ohm (2 << 3)
+ PAD_CTL_DSE_87ohm (3 << 3)
+ PAD_CTL_DSE_65ohm (4 << 3)
+ PAD_CTL_DSE_52ohm (5 << 3)
+ PAD_CTL_DSE_43ohm (6 << 3)
+ PAD_CTL_DSE_37ohm (7 << 3)
+ PAD_CTL_SRE_FAST (1 << 0)
+ PAD_CTL_SRE_SLOW (0 << 0)
+
+ required:
+ - fsl,pins
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ iomuxc: pinctrl@20e0000 {
+ compatible = "fsl,imx6ul-iomuxc";
+ reg = <0x020e0000 0x4000>;
+
+ mux_uart: uartgrp {
+ fsl,pins = <
+ 0x0084 0x0310 0x0000 0 0 0x1b0b1
+ 0x0088 0x0314 0x0624 0 3 0x1b0b1
+ >;
+ };
+ };
+ - |
+ iomuxc_snvs: pinctrl@2290000 {
+ compatible = "fsl,imx6ull-iomuxc-snvs";
+ reg = <0x02290000 0x4000>;
+
+ pinctrl_snvs_usbc_det: snvsusbcdetgrp {
+ fsl,pins = <
+ 0x0010 0x0054 0x0000 0x5 0x0 0x130b0
+ >;
+ };
+ };