diff mbox series

arm64: dts: imx8mp-evk: Fix hdmi@3d node

Message ID 20240223025738.2486807-1-victor.liu@nxp.com
State New
Headers
Series arm64: dts: imx8mp-evk: Fix hdmi@3d node |

Commit Message

Liu Ying Feb. 23, 2024, 2:57 a.m. UTC 
  The hdmi@3d node's compatible string is "adi,adv7535" instead of
"adi,adv7533" or "adi,adv751*".

Fix the hdmi@3d node by means of:
* Use default register addresses for "cec", "edid" and "packet", because
  there is no need to use a non-default address map.
* Add missing interrupt related properties.
* Drop "adi,input-*" properties which are only valid for adv751*.
* Add VEXT_3V3 fixed regulator.
* Add "*-supply" properties, since most are required.
* Fix label names - s/adv7533/adv7535/.

Fixes: 65344b9bed3a ("arm64: dts: imx8mp-evk: Add HDMI support")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 33 +++++++++++++-------
 1 file changed, 21 insertions(+), 12 deletions(-)

Comments

Shawn Guo Feb. 25, 2024, 1:28 p.m. UTC | #1 
On Fri, Feb 23, 2024 at 10:57:38AM +0800, Liu Ying wrote:
> The hdmi@3d node's compatible string is "adi,adv7535" instead of
> "adi,adv7533" or "adi,adv751*".
> 
> Fix the hdmi@3d node by means of:
> * Use default register addresses for "cec", "edid" and "packet", because
>   there is no need to use a non-default address map.
> * Add missing interrupt related properties.
> * Drop "adi,input-*" properties which are only valid for adv751*.
> * Add VEXT_3V3 fixed regulator.
> * Add "*-supply" properties, since most are required.
> * Fix label names - s/adv7533/adv7535/.
> 
> Fixes: 65344b9bed3a ("arm64: dts: imx8mp-evk: Add HDMI support")
> Signed-off-by: Liu Ying <victor.liu@nxp.com>

Applied, thanks!
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index f87fa5a948cc..9beba8d6a0df 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -23,7 +23,7 @@  hdmi-connector {
 
 		port {
 			hdmi_connector_in: endpoint {
-				remote-endpoint = <&adv7533_out>;
+				remote-endpoint = <&adv7535_out>;
 			};
 		};
 	};
@@ -107,6 +107,13 @@  reg_usdhc2_vmmc: regulator-usdhc2 {
 		enable-active-high;
 	};
 
+	reg_vext_3v3: regulator-vext-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VEXT_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "wm8960-audio";
@@ -364,7 +371,7 @@  BUCK4 {
 				regulator-always-on;
 			};
 
-			BUCK5 {
+			reg_buck5: BUCK5 {
 				regulator-name = "BUCK5";
 				regulator-min-microvolt = <1650000>;
 				regulator-max-microvolt = <1950000>;
@@ -415,14 +422,16 @@  &i2c2 {
 
 	hdmi@3d {
 		compatible = "adi,adv7535";
-		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
-		reg-names = "main", "cec", "edid", "packet";
+		reg = <0x3d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 		adi,dsi-lanes = <4>;
-		adi,input-depth = <8>;
-		adi,input-colorspace = "rgb";
-		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
+		avdd-supply = <&reg_buck5>;
+		dvdd-supply = <&reg_buck5>;
+		pvdd-supply = <&reg_buck5>;
+		a2vdd-supply = <&reg_buck5>;
+		v3p3-supply = <&reg_vext_3v3>;
+		v1p2-supply = <&reg_buck5>;
 
 		ports {
 			#address-cells = <1>;
@@ -431,7 +440,7 @@  ports {
 			port@0 {
 				reg = <0>;
 
-				adv7533_in: endpoint {
+				adv7535_in: endpoint {
 					remote-endpoint = <&dsi_out>;
 				};
 			};
@@ -439,7 +448,7 @@  adv7533_in: endpoint {
 			port@1 {
 				reg = <1>;
 
-				adv7533_out: endpoint {
+				adv7535_out: endpoint {
 					remote-endpoint = <&hdmi_connector_in>;
 				};
 			};
@@ -524,7 +533,7 @@  port@1 {
 			reg = <1>;
 
 			dsi_out: endpoint {
-				remote-endpoint = <&adv7533_in>;
+				remote-endpoint = <&adv7535_in>;
 				data-lanes = <1 2 3 4>;
 			};
 		};