[v5,2/4] arm64: dts: ti: k3-am62/a: use sub-node for USB_PHY_CTRL registers
Commit Message
Exposing the entire CTRL_MMR space to syscon is not a good idea.
Add sub-nodes for USB0_PHY_CTRL and USB1_PHY_CTRL and use them
in the USB0/USB1 nodes.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Andrew Davis <afd@ti.com>
---
Changelog:
v5 - no change.
v4 - no change. Added Andrew's Reviewed-by
https://lore.kernel.org/all/20240205135908.54656-3-rogerq@kernel.org/
v3 - no change
https://lore.kernel.org/all/20240201120332.4811-3-rogerq@kernel.org/
v2:
- moved am62p changes to next patch
- use new compatible for USB PHY CTRL node
---
arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 4 ++--
arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi | 10 ++++++++++
arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 4 ++--
arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi | 10 ++++++++++
4 files changed, 24 insertions(+), 4 deletions(-)
@@ -622,7 +622,7 @@ usbss0: dwc3-usb@f900000 {
reg = <0x00 0x0f900000 0x00 0x800>;
clocks = <&k3_clks 161 3>;
clock-names = "ref";
- ti,syscon-phy-pll-refclk = <&wkup_conf 0x4008>;
+ ti,syscon-phy-pll-refclk = <&usb0_phy_ctrl 0x0>;
#address-cells = <2>;
#size-cells = <2>;
power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
@@ -647,7 +647,7 @@ usbss1: dwc3-usb@f910000 {
reg = <0x00 0x0f910000 0x00 0x800>;
clocks = <&k3_clks 162 3>;
clock-names = "ref";
- ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;
+ ti,syscon-phy-pll-refclk = <&usb1_phy_ctrl 0x0>;
#address-cells = <2>;
#size-cells = <2>;
power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
@@ -21,6 +21,16 @@ chipid: chipid@14 {
compatible = "ti,am654-chipid";
reg = <0x14 0x4>;
};
+
+ usb0_phy_ctrl: syscon@4008 {
+ compatible = "ti,am62-usb-phy-ctrl", "syscon";
+ reg = <0x4008 0x4>;
+ };
+
+ usb1_phy_ctrl: syscon@4018 {
+ compatible = "ti,am62-usb-phy-ctrl", "syscon";
+ reg = <0x4018 0x4>;
+ };
};
target-module@2b300050 {
@@ -606,7 +606,7 @@ usbss0: dwc3-usb@f900000 {
reg = <0x00 0x0f900000 0x00 0x800>;
clocks = <&k3_clks 161 3>;
clock-names = "ref";
- ti,syscon-phy-pll-refclk = <&wkup_conf 0x4008>;
+ ti,syscon-phy-pll-refclk = <&usb0_phy_ctrl 0x0>;
#address-cells = <2>;
#size-cells = <2>;
power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
@@ -629,7 +629,7 @@ usbss1: dwc3-usb@f910000 {
reg = <0x00 0x0f910000 0x00 0x800>;
clocks = <&k3_clks 162 3>;
clock-names = "ref";
- ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;
+ ti,syscon-phy-pll-refclk = <&usb1_phy_ctrl 0x0>;
#address-cells = <2>;
#size-cells = <2>;
power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
@@ -17,6 +17,16 @@ chipid: chipid@14 {
compatible = "ti,am654-chipid";
reg = <0x14 0x4>;
};
+
+ usb0_phy_ctrl: syscon@4008 {
+ compatible = "ti,am62-usb-phy-ctrl", "syscon";
+ reg = <0x4008 0x4>;
+ };
+
+ usb1_phy_ctrl: syscon@4018 {
+ compatible = "ti,am62-usb-phy-ctrl", "syscon";
+ reg = <0x4018 0x4>;
+ };
};
wkup_uart0: serial@2b300000 {