diff mbox series

serial: 8250: Use serial8250_do_set_termios for uartclk updating

Message ID 20240222145058.28307-1-fancer.lancer@gmail.com
State New
Headers
Series serial: 8250: Use serial8250_do_set_termios for uartclk updating |

Commit Message

Serge Semin Feb. 22, 2024, 2:50 p.m. UTC 
  The serial8250_update_uartclk() body was created based on the several
method calls copied from the serial8250_do_set_termios() function. Seeing
aside with some other things the later method can update the baud rate
based on the new reference clock let's just call it instead thus
simplifying the code a bit.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/linux-serial/ZczD7KPbeRnY4CFc@black.fi.intel.com
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
---
 drivers/tty/serial/8250/8250_port.c | 20 +-------------------
 1 file changed, 1 insertion(+), 19 deletions(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 8ca061d3bbb9..a74d39846dd4 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -2714,12 +2714,8 @@  static unsigned int serial8250_get_baud_rate(struct uart_port *port,
  */
 void serial8250_update_uartclk(struct uart_port *port, unsigned int uartclk)
 {
-	struct uart_8250_port *up = up_to_u8250p(port);
 	struct tty_port *tport = &port->state->port;
-	unsigned int baud, quot, frac = 0;
-	struct ktermios *termios;
 	struct tty_struct *tty;
-	unsigned long flags;
 
 	tty = tty_port_tty_get(tport);
 	if (!tty) {
@@ -2740,21 +2736,7 @@  void serial8250_update_uartclk(struct uart_port *port, unsigned int uartclk)
 	if (!tty_port_initialized(tport))
 		goto out_unlock;
 
-	termios = &tty->termios;
-
-	baud = serial8250_get_baud_rate(port, termios, NULL);
-	quot = serial8250_get_divisor(port, baud, &frac);
-
-	serial8250_rpm_get(up);
-	uart_port_lock_irqsave(port, &flags);
-
-	uart_update_timeout(port, termios->c_cflag, baud);
-
-	serial8250_set_divisor(port, baud, quot, frac);
-	serial_port_out(port, UART_LCR, up->lcr);
-
-	uart_port_unlock_irqrestore(port, flags);
-	serial8250_rpm_put(up);
+	serial8250_do_set_termios(port, &tty->termios, NULL);
 
 out_unlock:
 	mutex_unlock(&tport->mutex);