diff mbox series

[net-next,2/3] net: phy: dp83826: Add support for phy-mode configuration

Message ID 20240222103117.526955-3-jeremie.dautheribes@bootlin.com
State New
Headers
Series Add support for TI DP83826 configuration |

Commit Message

Jérémie Dautheribes Feb. 22, 2024, 10:31 a.m. UTC 
  The TI DP83826 PHY can operate in either MII mode or RMII mode.
By default, it is configured by straps.
It can also be configured by writing to the bit 5 of register 0x17 - RMII
and Status Register (RCSR).

When phydev->interface is rmii, rmii mode must be enabled, otherwise
mii mode must be set.
This prevents misconfiguration of hw straps.

Signed-off-by: Jérémie Dautheribes <jeremie.dautheribes@bootlin.com>
---
 drivers/net/phy/dp83822.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index 30f2616ab1c2..2d8275e59dcc 100644
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -100,6 +100,7 @@ 
 #define DP83822_WOL_CLR_INDICATION BIT(11)
 
 /* RCSR bits */
+#define DP83822_RMII_MODE_EN	BIT(5)
 #define DP83822_RGMII_MODE_EN	BIT(9)
 #define DP83822_RX_CLK_SHIFT	BIT(12)
 #define DP83822_TX_CLK_SHIFT	BIT(11)
@@ -500,6 +501,16 @@  static int dp83826_config_init(struct phy_device *phydev)
 	u16 val, mask;
 	int ret;
 
+	if (phydev->interface == PHY_INTERFACE_MODE_RMII)
+		ret = phy_set_bits_mmd(phydev, DP83822_DEVADDR, MII_DP83822_RCSR,
+				       DP83822_RMII_MODE_EN);
+	else
+		ret = phy_clear_bits_mmd(phydev, DP83822_DEVADDR, MII_DP83822_RCSR,
+					 DP83822_RMII_MODE_EN);
+
+	if (ret)
+		return ret;
+
 	if (dp83822->cfg_dac_minus != DP83826_CFG_DAC_MINUS_DEFAULT) {
 		val = FIELD_PREP(DP83826_VOD_CFG1_MINUS_MDI_MASK, dp83822->cfg_dac_minus) |
 		      FIELD_PREP(DP83826_VOD_CFG1_MINUS_MDIX_MASK,