diff mbox series

[v9,2/3] pwm: sifive: change the PWM algorithm

Message ID 20240222081231.213406-3-nylon.chen@sifive.com
State New
Headers
Series Change PWM-controlled LED pin active mode and algorithm |

Commit Message

Nylon Chen Feb. 22, 2024, 8:12 a.m. UTC 
  The `frac` variable represents the pulse inactive time, and the result
of this algorithm is the pulse active time.
Therefore, we must reverse the result.

The reference is SiFive FU740-C000 Manual[0]

Link: https://sifive.cdn.prismic.io/sifive/1a82e600-1f93-4f41-b2d8-86ed8b16acba_fu740-c000-manual-v1p6.pdf [0]

Co-developed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Zong Li <zong.li@sifive.com>
Co-developed-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Nylon Chen <nylon.chen@sifive.com>
---
 drivers/pwm/pwm-sifive.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pwm/pwm-sifive.c b/drivers/pwm/pwm-sifive.c
index eabddb7c7820..a586cfe4191b 100644
--- a/drivers/pwm/pwm-sifive.c
+++ b/drivers/pwm/pwm-sifive.c
@@ -110,9 +110,10 @@  static int pwm_sifive_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
 				struct pwm_state *state)
 {
 	struct pwm_sifive_ddata *ddata = pwm_sifive_chip_to_ddata(chip);
-	u32 duty, val;
+	u32 duty, val, inactive;
 
-	duty = readl(ddata->regs + PWM_SIFIVE_PWMCMP(pwm->hwpwm));
+	inactive = readl(ddata->regs + PWM_SIFIVE_PWMCMP(pwm->hwpwm));
+	duty = (1U << PWM_SIFIVE_CMPWIDTH) - 1 - inactive;
 
 	state->enabled = duty > 0;
 
@@ -123,7 +124,7 @@  static int pwm_sifive_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
 	state->period = ddata->real_period;
 	state->duty_cycle =
 		(u64)duty * ddata->real_period >> PWM_SIFIVE_CMPWIDTH;
-	state->polarity = PWM_POLARITY_INVERSED;
+	state->polarity = PWM_POLARITY_NORMAL;
 
 	return 0;
 }
@@ -139,7 +140,7 @@  static int pwm_sifive_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	int ret = 0;
 	u32 frac;
 
-	if (state->polarity != PWM_POLARITY_INVERSED)
+	if (state->polarity != PWM_POLARITY_NORMAL)
 		return -EINVAL;
 
 	cur_state = pwm->state;
@@ -159,6 +160,7 @@  static int pwm_sifive_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	frac = DIV64_U64_ROUND_CLOSEST(num, state->period);
 	/* The hardware cannot generate a 100% duty cycle */
 	frac = min(frac, (1U << PWM_SIFIVE_CMPWIDTH) - 1);
+	frac = (1U << PWM_SIFIVE_CMPWIDTH) - 1 - frac;
 
 	mutex_lock(&ddata->lock);
 	if (state->period != ddata->approx_period) {