[v3,4/4] arm64: dts: qcom: x1e80100-qcp: Add repeater nodes
Commit Message
Include the PMIC dedicated file and add regulators to each one of
those 3 eUSB2 repeaters. Tie up the repeaters to their corresponding
USB HS PHY.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
@@ -9,6 +9,7 @@
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "x1e80100.dtsi"
+#include "x1e80100-pmics.dtsi"
/ {
model = "Qualcomm Technologies, Inc. X1E80100 QCP";
@@ -491,6 +492,21 @@ &remoteproc_cdsp {
status = "okay";
};
+&smb2360_0_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&smb2360_2_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l8b_3p0>;
+};
+
&tlmm {
gpio-reserved-ranges = <33 3>, /* Unused */
<44 4>, /* SPI (TPM) */
@@ -513,6 +529,8 @@ &usb_1_ss0_hsphy {
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
+ phys = <&smb2360_0_eusb2_repeater>;
+
status = "okay";
};
@@ -533,6 +551,8 @@ &usb_1_ss1_hsphy {
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
+ phys = <&smb2360_1_eusb2_repeater>;
+
status = "okay";
};
@@ -553,6 +573,8 @@ &usb_1_ss2_hsphy {
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
+ phys = <&smb2360_2_eusb2_repeater>;
+
status = "okay";
};