[v2,5/5] Revert "platform/x86: asus-wmi: Support WMI event queue"
Commit Message
This reverts commit 1a373d15e283937b51eaf5debf4fc31474c31436.
The WMI core now takes care of draining the event queue if asus-wmi
is not loaded, so the hacky event queue handling code is not needed
anymore.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
---
drivers/platform/x86/asus-wmi.c | 71 +++------------------------------
1 file changed, 5 insertions(+), 66 deletions(-)
--
2.39.2
@@ -101,13 +101,6 @@ module_param(fnlock_default, bool, 0444);
#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31
#define ASUS_ACPI_UID_ASUSWMI "ASUSWMI"
-#define ASUS_ACPI_UID_ATK "ATK"
-
-#define WMI_EVENT_QUEUE_SIZE 0x10
-#define WMI_EVENT_QUEUE_END 0x1
-#define WMI_EVENT_MASK 0xFFFF
-/* The WMI hotkey event value is always the same. */
-#define WMI_EVENT_VALUE_ATK 0xFF
#define WMI_EVENT_MASK 0xFFFF
@@ -219,7 +212,6 @@ struct asus_wmi {
int dsts_id;
int spec;
int sfun;
- bool wmi_event_queue;
struct input_dev *inputdev;
struct backlight_device *backlight_device;
@@ -4019,50 +4011,14 @@ static void asus_wmi_handle_event_code(int code, struct asus_wmi *asus)
static void asus_wmi_notify(u32 value, void *context)
{
struct asus_wmi *asus = context;
- int code;
- int i;
-
- for (i = 0; i < WMI_EVENT_QUEUE_SIZE + 1; i++) {
- code = asus_wmi_get_event_code(value);
- if (code < 0) {
- pr_warn("Failed to get notify code: %d\n", code);
- return;
- }
-
- if (code == WMI_EVENT_QUEUE_END || code == WMI_EVENT_MASK)
- return;
-
- asus_wmi_handle_event_code(code, asus);
-
- /*
- * Double check that queue is present:
- * ATK (with queue) uses 0xff, ASUSWMI (without) 0xd2.
- */
- if (!asus->wmi_event_queue || value != WMI_EVENT_VALUE_ATK)
- return;
- }
+ int code = asus_wmi_get_event_code(value);
- pr_warn("Failed to process event queue, last code: 0x%x\n", code);
-}
-
-static int asus_wmi_notify_queue_flush(struct asus_wmi *asus)
-{
- int code;
- int i;
-
- for (i = 0; i < WMI_EVENT_QUEUE_SIZE + 1; i++) {
- code = asus_wmi_get_event_code(WMI_EVENT_VALUE_ATK);
- if (code < 0) {
- pr_warn("Failed to get event during flush: %d\n", code);
- return code;
- }
-
- if (code == WMI_EVENT_QUEUE_END || code == WMI_EVENT_MASK)
- return 0;
+ if (code < 0) {
+ pr_warn("Failed to get notify code: %d\n", code);
+ return;
}
- pr_warn("Failed to flush event queue\n");
- return -EIO;
+ asus_wmi_handle_event_code(code, asus);
}
/* Sysfs **********************************************************************/
@@ -4302,23 +4258,6 @@ static int asus_wmi_platform_init(struct asus_wmi *asus)
asus->dsts_id = ASUS_WMI_METHODID_DSTS;
}
- /*
- * Some devices can have multiple event codes stored in a queue before
- * the module load if it was unloaded intermittently after calling
- * the INIT method (enables event handling). The WMI notify handler is
- * expected to retrieve all event codes until a retrieved code equals
- * queue end marker (One or Ones). Old codes are flushed from the queue
- * upon module load. Not enabling this when it should be has minimal
- * visible impact so fall back if anything goes wrong.
- */
- wmi_uid = wmi_get_acpi_device_uid(asus->driver->event_guid);
- if (wmi_uid && !strcmp(wmi_uid, ASUS_ACPI_UID_ATK)) {
- dev_info(dev, "Detected ATK, enable event queue\n");
-
- if (!asus_wmi_notify_queue_flush(asus))
- asus->wmi_event_queue = true;
- }
-
/* CWAP allow to define the behavior of the Fn+F2 key,
* this method doesn't seems to be present on Eee PCs */
if (asus->driver->quirks->wapf >= 0)