[v2] arm64: dts: qcom: sm6350: Add Crypto Engine
Commit Message
Add crypto engine (CE) and CE BAM related nodes and definitions for this
SoC.
For reference:
[ 2.297419] qcrypto 1dfa000.crypto: Crypto device found, version 5.5.1
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
Add the compatible and nodes for the QCE found on SM6350 SoC.
Not completely sure how to fully test it but "kcapi-speed --all" shows
no issues. Let me know if I can/should test this more.
---
Changes in v2:
- Drop applied patch
- Sort iommu entries & drop extra leading zeroes from mask
- Link to v1: https://lore.kernel.org/r/20240105-sm6350-qce-v1-0-416e5c7319ac@fairphone.com
---
arch/arm64/boot/dts/qcom/sm6350.dtsi | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
---
base-commit: 6af5a37dbe961391c3c357c0799d76dcd7c280e4
change-id: 20240105-sm6350-qce-c6233abbf54f
Best regards,
@@ -1202,6 +1202,37 @@ ufs_mem_phy: phy@1d87000 {
status = "disabled";
};
+ cryptobam: dma-controller@1dc4000 {
+ compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+ reg = <0 0x01dc4000 0 0x24000>;
+ interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ qcom,controlled-remotely;
+ num-channels = <16>;
+ qcom,num-ees = <4>;
+ iommus = <&apps_smmu 0x426 0x11>,
+ <&apps_smmu 0x432 0x0>,
+ <&apps_smmu 0x436 0x11>,
+ <&apps_smmu 0x438 0x1>,
+ <&apps_smmu 0x43f 0x0>;
+ };
+
+ crypto: crypto@1dfa000 {
+ compatible = "qcom,sm6350-qce", "qcom,sm8150-qce", "qcom,qce";
+ reg = <0 0x01dfa000 0 0x6000>;
+ dmas = <&cryptobam 4>, <&cryptobam 5>;
+ dma-names = "rx", "tx";
+ iommus = <&apps_smmu 0x426 0x11>,
+ <&apps_smmu 0x432 0x0>,
+ <&apps_smmu 0x436 0x11>,
+ <&apps_smmu 0x438 0x1>,
+ <&apps_smmu 0x43f 0x0>;
+ interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "memory";
+ };
+
ipa: ipa@1e40000 {
compatible = "qcom,sm6350-ipa";