[v7] dt-bindings: rtc: abx80x: convert to yaml
Commit Message
Convert the abracon abx80x rtc text bindings to dt-schema format.
In addition to the text description reference generic interrupts
properties and add an example.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes in v7:
- split out of original patchset because it should go by rtc tree
- collected reviewed-by from v5
(Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>)
- Link to v6: https://lore.kernel.org/r/20240212-add-am64-som-v6-0-b59edb2bc8c3@solid-run.com
---
.../devicetree/bindings/rtc/abracon,abx80x.txt | 31 ---------
.../devicetree/bindings/rtc/abracon,abx80x.yaml | 79 ++++++++++++++++++++++
2 files changed, 79 insertions(+), 31 deletions(-)
---
base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d
change-id: 20240219-rtc-abracon-convert-bindings-50743f95ce2b
Best regards,
Comments
On Mon, 19 Feb 2024 15:29:45 +0100, Josua Mayer wrote:
> Convert the abracon abx80x rtc text bindings to dt-schema format.
>
> In addition to the text description reference generic interrupts
> properties and add an example.
>
>
Applied, thanks!
[1/1] dt-bindings: rtc: abx80x: convert to yaml
https://git.kernel.org/abelloni/c/626e2b54645a
Best regards,
deleted file mode 100644
@@ -1,31 +0,0 @@
-Abracon ABX80X I2C ultra low power RTC/Alarm chip
-
-The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801,
-ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805
-is the superset of ab180x.
-
-Required properties:
-
- - "compatible": should one of:
- "abracon,abx80x"
- "abracon,ab0801"
- "abracon,ab0803"
- "abracon,ab0804"
- "abracon,ab0805"
- "abracon,ab1801"
- "abracon,ab1803"
- "abracon,ab1804"
- "abracon,ab1805"
- "microcrystal,rv1805"
- Using "abracon,abx80x" will enable chip autodetection.
- - "reg": I2C bus address of the device
-
-Optional properties:
-
-The abx804 and abx805 have a trickle charger that is able to charge the
-connected battery or supercap. Both the following properties have to be defined
-and valid to enable charging:
-
- - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
- - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
- resistor, the other values are in kOhm.
new file mode 100644
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/abracon,abx80x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Abracon ABX80X I2C ultra low power RTC/Alarm chip
+
+maintainers:
+ - linux-rtc@vger.kernel.org
+
+allOf:
+ - $ref: rtc.yaml#
+
+properties:
+ compatible:
+ description:
+ The wildcard 'abracon,abx80x' may be used to support a mix
+ of different abracon rtc`s. In this case the driver
+ must perform auto-detection from ID register.
+ enum:
+ - abracon,abx80x
+ - abracon,ab0801
+ - abracon,ab0803
+ - abracon,ab0804
+ - abracon,ab0805
+ - abracon,ab1801
+ - abracon,ab1803
+ - abracon,ab1804
+ - abracon,ab1805
+ - microcrystal,rv1805
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ abracon,tc-diode:
+ description:
+ Trickle-charge diode type.
+ Required to enable charging backup battery.
+
+ Supported are 'standard' diodes with a 0.6V drop
+ and 'schottky' diodes with a 0.3V drop.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum:
+ - standard
+ - schottky
+
+ abracon,tc-resistor:
+ description:
+ Trickle-charge resistor value in kOhm.
+ Required to enable charging backup battery.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 3, 6, 11]
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@69 {
+ compatible = "abracon,abx80x";
+ reg = <0x69>;
+ abracon,tc-diode = "schottky";
+ abracon,tc-resistor = <3>;
+ interrupts = <44 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };