diff mbox series

[1/2] ARM: dts: microchip: sama7g5: align dmas to the opening '<'

Message ID 20240218151353.3612621-2-claudiu.beznea@tuxon.dev
State New
Headers
Series ARM: dts: microchip: few DT cleanups |

Commit Message

claudiu beznea Feb. 18, 2024, 3:13 p.m. UTC 
  Align dmas to the opening '<' to comply with the dts coding style,
indentation section, point 3: "For arrays spanning across lines, it is
preferred to align the continued entries with opening < from the first
line."

Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
---
 arch/arm/boot/dts/microchip/sama7g5.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/microchip/sama7g5.dtsi b/arch/arm/boot/dts/microchip/sama7g5.dtsi
index 269e0a3ca269..15227a870d34 100644
--- a/arch/arm/boot/dts/microchip/sama7g5.dtsi
+++ b/arch/arm/boot/dts/microchip/sama7g5.dtsi
@@ -714,7 +714,7 @@  uart0: serial@200 {
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
 				clock-names = "usart";
 				dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>,
-					<&dma1 AT91_XDMAC_DT_PERID(5)>;
+				       <&dma1 AT91_XDMAC_DT_PERID(5)>;
 				dma-names = "tx", "rx";
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -740,7 +740,7 @@  i2c1: i2c@600 {
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
 				atmel,fifo-size = <32>;
 				dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
-					<&dma0 AT91_XDMAC_DT_PERID(7)>;
+				       <&dma0 AT91_XDMAC_DT_PERID(7)>;
 				dma-names = "tx", "rx";
 				status = "disabled";
 			};
@@ -763,7 +763,7 @@  uart3: serial@200 {
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
 				clock-names = "usart";
 				dmas = <&dma1 AT91_XDMAC_DT_PERID(12)>,
-					<&dma1 AT91_XDMAC_DT_PERID(11)>;
+				       <&dma1 AT91_XDMAC_DT_PERID(11)>;
 				dma-names = "tx", "rx";
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -807,7 +807,7 @@  uart4: serial@200 {
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
 				clock-names = "usart";
 				dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>,
-					<&dma1 AT91_XDMAC_DT_PERID(13)>;
+				       <&dma1 AT91_XDMAC_DT_PERID(13)>;
 				dma-names = "tx", "rx";
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -833,7 +833,7 @@  uart7: serial@200 {
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
 				clock-names = "usart";
 				dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>,
-					<&dma1 AT91_XDMAC_DT_PERID(19)>;
+				       <&dma1 AT91_XDMAC_DT_PERID(19)>;
 				dma-names = "tx", "rx";
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -928,7 +928,7 @@  i2c8: i2c@600 {
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
 				atmel,fifo-size = <32>;
 				dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>,
-					<&dma0 AT91_XDMAC_DT_PERID(21)>;
+				       <&dma0 AT91_XDMAC_DT_PERID(21)>;
 				dma-names = "tx", "rx";
 				status = "disabled";
 			};
@@ -952,7 +952,7 @@  i2c9: i2c@600 {
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
 				atmel,fifo-size = <32>;
 				dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>,
-					<&dma0 AT91_XDMAC_DT_PERID(23)>;
+				       <&dma0 AT91_XDMAC_DT_PERID(23)>;
 				dma-names = "tx", "rx";
 				status = "disabled";
 			};
@@ -977,7 +977,7 @@  spi11: spi@400 {
 				#size-cells = <0>;
 				atmel,fifo-size = <32>;
 				dmas = <&dma0 AT91_XDMAC_DT_PERID(28)>,
-					    <&dma0 AT91_XDMAC_DT_PERID(27)>;
+				       <&dma0 AT91_XDMAC_DT_PERID(27)>;
 				dma-names = "tx", "rx";
 				status = "disabled";
 			};